



1.1 Summary
PeerCall USB Adaptor is a convenient, effective, and easy-to-use device for everyday voice communication. User can switch between an Internet phone (VoIP) and a regular phone simply by pressing “*” key. It provides not only the great convenience
but big cost savings as well.

2.1 Connect USB Adaptor to PC
Connect USB Adaptor to PC, POWER indicator will be on.
Connect telephone line from the wall outlet to "LINE" port.
Connect Phone set to "TEL” port.
2.2 Run PeerCall WIN
PeerCall WIN shows a dialog indicate device is connected successfully.

You can press “*” to switch PSTN channel to USB channel or switch USB channel to
PSTN channel.
2.4 Make calls through USB
Input number and call out:
Press “*” to change to USB channel, the "USB" indicator is on. Press PeerCall number on the phone keypad, this number will be shown on PeerCall WIN window, then press “#” to call out. When you hang-up, the USB Adaptor switch to PSTN channel automatically.
2.5 Make calls through PSTN (Phone to Phone) Press the regular phone number, then press “#” to call out. For example: to call 800-123-4567 Operation: Input the number 8001234567, then press “#” to call out.
2.6 Answer a call When a call (can be either PeerCall or PSTN) comes in, the phone is ringing, pick up
handset or press handfree key to answer the call.
2.7 Adjust options (default channel) Set the default channel and sound card settings in the “Options”, as shown:


2.8 Adjust Volume Please execute the “Control Panel->Sounds and Multimedia(
)->Audio”, it shown as below: Click Volume for sound Playback show “Speaker” dialog:


Click Volume for sound Recording show “Wave IN” dialog

Les utilisateurs et notre équipe répondent généralement sous 24 h — et votre question servira aussi aux suivants.
Soyez le premier à poser une question — d'autres utilisateurs ou notre équipe y répondront.