Manuel d'utilisation / d'entretien du produit KX-TCD700AL du fabricant Panasonic
Aller à la page of 56
Digital Cor dless Phone Model No. KX-TCD700AL Operating Instructions PLEASE READ BEFORE USE AND SA VE. Charge the batteries for appr o x. 10 hours bef ore initial use.
Impor tant Inf ormation 2 Do not connect the AC adaptor to any AC outlet other than the standard AC 220–240 V , 50 Hz. • Output voltage DC 9V , 500 mA. • The apparatus is approved for use with the PQL V1AL power supply . • CAUTION: Do not remove cover .
For your future ref erence Serial No. Date of purchase (found on the bottom of the unit) Name and address of dealer Accessories (included). AC Adaptor one T elephone Line Cord/Plug one Batteries (AA s.
4 Contents Chapter 1 Preparation Chapter 3 Programmab le Functions (On the Handset) Chapter 2 (Basic Operations) Getting Started ..................................6 Connections .....................................6 Installing the Batteries in the Handset .
5 Chapter 4 Programmab le Functions (On the Base Unit) Summary of Programmable Functions ..........................................42 Bell Selection..................................42 Select Earth/T ime Break Recall Mode .............................
6 Connections Plug in the AC Adaptor and the telephone line cord to the rear of the unit. Then connect the cord as shown. Getting Star ted LINE Fasten the AC adaptor cord to prevent it from being disconnected Hook 9v USE ONL Y WITH Panasonic AC ADAPT OR PQL V1AL.
7 ➡ Installing the Batteries in the Handset Battery Charge At the time of shipment, the batteries are not charged. T o charge, place the handset on the base unit. Please charge the batteries for approximately 10 hours before initial use. During charging, the battery icon is as shown above.
8 Battery Caution: To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the batteries specified. 2. Do not use non-rechargeable batteries. 3. Do not mix old and new batteries. 4. Do not dispose of the batteries in a fire.
Safety Instructions ➡ 9 T ake special care to follow the safety suggestions listed below . Safety 1) The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 2) When left unused for a long period of time, the base unit should be unplugged from the household AC outlet.
10 W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO LIQUID OR ANY TYPE OF MOISTURE. When a failure occurs which results in the internal parts becoming accessible, disconnect AC adaptor immediately and return this unit to the place of purchase or service centre.
11 W all Mounting 6cm 6cm W ALL TEMPLA TE CHAPTER 1 If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is complete.
12 Location of Contr ols Base Unit Handset Page Button Charge Contacts 7 1 0 3 2 4 6 8 9 5 Display Receiver (Function/OK) Button P (Talk Off/Power) Button N (Intercom) Button Charge Contact Microphone.
13 Getting Star ted continued Displa ys Handset Displa y Icons 888888888888 ÂÊÁËÈÍ ÎÏÔÓÒ (The display shows all possible configurations) Î The in-range icon indicates that the handset is in range of the base unit. It flashes when the handset is out of range.
14 Making a Call For further information on making calls, see pages 15-16. 1. ZO 2. Dial a phone number The dialled number is displayed. (If a number is entered incorrectly , ZP ). After a few seconds, the display will start showing the length of the call.
15 Making Calls ➡ Note: for basic making calls operation, see page 14. To Dial After Confirming the Entered Number With this feature you are able to confirm the entered number before you start dialling. 1. Dial a Phone Number (If number is not entered correctly: To clear one digit, ZW briefly .
16 ➡ Making Calls To Edit/Clear Numbers in the Redial List To edit and clear numbers in the redial memory , press X , select number and then follow from step 2 (Page 22). Direct Call Y ou can store one number into memory and then call this number by pressing O .
17 Ans wering Calls Answering Calls For basic answering call operation, see page 14. • The handset and base unit will not ring if both ringer volumes are set to OFF (p. 31, 46). A uto T alk If you set the Auto T alk Feature to ON (p. 36), you can answer a call by lifting the handset off the base unit without pressing O .
18 Speed Dialling Storing Phone Numbers in Memory Y ou can store up to 20 telephone numbers in the handset Storing new number s 1. ZY or V 2. ZY or V (Speed dial is selected, speed dial icon is displayed Á ). 3. Enter phone number (Up to 24 digits) (Phone numbers are displayed from the left edge of the LCD).
19 ➡ Speed Dial Menu In the speed dial menu, it is possible to carry out the following operations: • Edit a speed dial number ( edit ). • Clear a speed dial number ( clear ). • Register a speed dial number to Hot Ke y ( hot key reg ). (Standby Mode) 01-111222333 ÂÊ Á ËÈÍ Î ÏÔÓ Ò • If key is already related to speed dial no.
20 Saving Number s in Speed Dial List ( save speed ) T elephone numbers can be saved into the speed dial list from other lists eg. Caller ID list, re-dial list, etc. To save a number from other lists; 1. Display n umber to be saved 2. ZY or V 3. ZY or V “ save speed” is selected.
This unit is compatible with a Caller ID service offered by your telephone company . If you should subscribe to a Caller ID service, the calling party’s information will be shown on the handset display after the first ring.
22 ➡ Caller ID Service Caller ID Sub-Menu In the Caller ID sub-menu, it is possible to carry out the following operations: • Save a Caller ID Number to speed dial list ( save speed ). • Edit a Caller ID Number ( edit call no ). • Delete a Caller ID Number ( clear ).
23 Using the Caller List ➡ Viewing the Caller List T elephone numbers of up to 50 different callers are stored from the most recent to the oldest call in the Caller List. When the 51st call is received, the oldest call is deleted. To check the caller ’s phone number , follow the steps below .
➡ Using the Caller List Calling Bac k from the Caller List Using the list you can automatically call back a caller . 1. Select Caller ID number b y pressing S or U. 2. ZO . .• After a few seconds the length of call is displayed. 3. T o hang up ZP .
25 Pa ging/Inter com ➡ Pa ging All Handsets fr om the Base Unit 1. ZÏ (On the Base Unit). • All handsets will ring for one minute. 2. T o stop paging, ZÏ a gain or ZO on one of the handsets. Inter com between Handsets A 2-way intercom is available between handsets.
26 ➡ Pa ging/Inter com T ransferring a call using the Intercom (continued) 3. (Handset 2) When the unit rings, ZO or N to answer . 4. (Handset 1) T ransferring a call ZP • The transfer is completed.
27 Special Features ➡ How to Use the P ause Feature (For Analog PBX Line/Long Distance Service Users) We recommend you insert “ X ” if a pause is required for dialling with a PBX or to access a long distance service (When X is pressed, ‘ p ’ is displayed on LCD).
28 ➡ Special Features Setting the Ke y Loc k (ON) Y ou can lock the handset dialling buttons. Only incoming calls are accepted until the key lock is cancelled. Y ou can answer a call by pressing any dialling button K to I , J or L (-Any Key Answer).
29 Summary of Programmab le Functions On the Handset Y ou can program the following function items using the handset near the base unit. See the corresponding pages for function details.
30 Setting Time Alarm Function Within the T ime Alarm menu, it is possible to program the following: • Set Time of Alarm ( s s e e t t t t i i m m e e ).
31 Setting Ringer Options Within the Ringer Option menu, it is possible to program the following: • Select the Handset Ringer V olume ( r r i i n n g g e e r r v v o o l l ) (6 le vels av ailable plus OFF ( r r i i n n g g e e r r o o f f f f )). • Select the Ringer P attern for External Incoming Call ( e e x x t t r r i i n n g g e e r r ).
32 Setting T one Options Within the T one Option menu, it is possible to program the following: • Set Ke y Confirmation T one ON/OFF ( k k e e y y t t o o n n e e ) ( o o n n / / o o f f f f ). Y ou can choose whether or not the handset keys will sound tones (eg.
33 Setting Displa y Options Within the Display Option menu, it is possible to program the following: • Select the Standby Mode Displa y ( s s t t a a n n d d b b y y m m o o d d e e ).
34 Setting Call Options Within the Call Option menu, it is possible to program the following: • Set Call Prohibition ( c c a a l l l l b b a a r r ) see page 35. • Set Direct Call Number ( d d i i r r e e c c t t n n o o ). Y ou can store a number in the direct call memory .
35 Note: • T o return to the previous step during programming, ZT . • T o exit the programming mode at any time, ZP . hs pin œœœœ  ÊÁËÈÍ Î ÏÔÓ Ò off  ÊÁËÈÍ Î ÏÔÓ .
Setting Other Options Within the Other Option menu, you can program the following: • Change Handset PIN ( h h s s p p i i n n c c h h a a n n g g e e ).
• Change Handset PIN ( h h s s p p i i n n c c h h a a n n g g e e ) • Y ou can program a 4 digit password for the handset. The factory pre-set is 0000.
38 Registration • Register a Handset to a Base Unit ( r r e e g g i i s s t t e e r r h h s s ) The handset supplied with the base unit is already registered. If an optional handset/base unit is purchased, the following procedure needs to be carried out before initial use.
39 ➡ • Cancelling a Base Unit ( c c a a n n c c e e l l b b a a s s e e ) If another handset is out of range and/or its power is OFF when ‘Cancelling a handset’, the previous base unit number will still remain in the cancelled handset. Therefore, you need to cancel the base unit registered in the cancelled handset .
40 Select Base Unit ( select bs ) • A utomatic Base Unit Access ( a a u u t t o o ) The handset automatically selects a registered base unit. • When the handset moves to another base unit radio area, it loses contact with the previous base unit and automatically accesses the new base unit.
41 Reset Handset ( reset hs ) This function enables the handset to clear the following settings at one time. They will return to their initial settings.
42 Pr ogrammab le Functions (On the Base Unit) Bell Selection There are three choices for Bell Selection when a call is being received • all handsets ring. “All handsets” • the selected handset(s) ring(s). “Selected handset(s)” • the selected handset rings first.
43 • 3 seconds is selected. ZA or B to select Pause time. eg. 1 = 3 seconds 2 = 5 seconds. • Select Pause Timing. ZC • Enter PIN (4 digits). ZC • Select Flash Timing.
44 ➡ Pr ogrammable Functions (On the Base Unit) Set the Base Unit PIN Y ou can program a 4-digit password for the base unit. Each factory preset is 0000. Changing the password may prevent the unauthorised use of your unit by another person. Cancelling a Handset Each handset can cancel itself or another handset.
45 ➡ Call Restriction Y ou can restrict desired handset(s) from dialling selected phone numbers. Phone numbers beginning with the restricted digits cannot be dialled out. For example, if “00” is assigned as the call restriction number , international calls cannot be made.
46 ➡ Pr ogrammable Functions (On the Base Unit) To Select the Base Unit Ring er V olume 4 levels are available. The factory preset is MEDIUM. When set to OFF , the base unit will not ring. Setting the Cloc k To set clock, please program as below . The clock can be displayed as an option in standby mode (see page 33).
47 Reset Base Unit This function enables the base unit to clear the following settings at one time. They will return to their initial settings. The following are factory default settings of the Base Unit.
48 Option Co ver s Y ou can change the look of your phone’s handset with option covers. 1. T urn the phone of f. Remove the battery cover by sliding while pressing the arrow . Remove the batteries. 2. The option cover is locked by the right and left tabs.
49 4. Place the new option cover by fitting the tabs on the cover into their slots on the handset. 5. Snap the option cover shut on the lower ➀ , middle ➁ and upper ➂ parts of the handset. 6. Connect the batteries and close the battery cover . Using the Belt Clip Y ou can hang the handset on your belt or pocket using the belt clip.
50 Bef ore Requesting Help Prob lem Remedy The unit does not work. • T urn the power ON (p.14). • Check the settings. • Charge the batteries fully (p.9). • Clean the charge contacts and charge again (p.9). • Unplug the AC adaptor and turn the power OFF to reset.
51 ➡ Prob lem Remedy While programming or searching, • T o answer the call, lift the handset or ZO . the unit starts to ring and stops • Start again from the beginning after hanging up. the program/search. The unit does not display the • Other telephone equipment may be interfering with caller ’s phone numbers.
52 ➡ Bef ore Requesting Help Prob lem Remedy “ Û ” flashes or the unit bleeps • Charge the batteries fully (p.9). every 15 seconds. Y ou charged the batteries fully , • Clean the charge contacts and charge again (p.9). but “ Û ” flashes.
53 Panasonic Technics WARRANTY 1. This product is warranted for 12 months from the date of purchase excluding the ba ttery. Su bject to the conditions of this warranty Panasonic or it's Authorise.
54 700al australian 2 5 02 2/5/02 3:00 pm Page 54.
55 700al australian 2 5 02 2/5/02 3:00 pm Page 55.
P anasonic Australia Pty Ltd A ustlink Cororate P ark 1 Garigal Road Belrose NSW 2085 A ustralia K yushu Matsushita Electric (U .K.) Ltd. Pencarn W ay , Duffryn, Newport, South W ales, NP10 8YE, United Kingdom Printed in Thailand Q UQX00060ZA KU0402LL1 MODEL No.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic KX-TCD700AL c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic KX-TCD700AL - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic KX-TCD700AL, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic KX-TCD700AL va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic KX-TCD700AL, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic KX-TCD700AL.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic KX-TCD700AL. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic KX-TCD700AL ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
