Manuel d'utilisation / d'entretien du produit KX-FLB851 du fabricant Panasonic
Aller à la page of 110
Please read these operating instructions before using the unit and sav e f or future reference . This model is designed to be used only in the U .S.A. All in One Flatbed Laser F ax with Multi-Action Sor ter Operating Instructions Model No .
i Location of Controls How to use the operating in structions When f ollowing operating i nstructions, alwa ys keep the front co ver page (ne xt page) open for eas y reference to the b uttons.
ii Location of controls Please keep thi s page open when f ollowing operating i ns tructions. F or a description of each button, see page 9. Buttons (List ed in alphabetical order) BR OADCAST B LO WER.
2 Thank you f o r purchasing a P anasonic fax machine . Things y ou should keep a record of Attach y our sales receipt here . For you r future reference Caution: L The T elephone Consumer Protection A.
Important Information 3 F or assistance, please visit http://www .panasonic.com/consumersuppor t Important Information Safet y Instructions 1For assist ance, please visi t http://www.
Impor tant Inf ormat ion 4 F or assistance, please visit http://www .panasonic.com/consumersuppor t Laser radiation L The printer of this unit utilizes a laser . Use of controls or adjustments or perf ormanc e of procedures other than those specified herein may r esult in hazardous radiation e xposure.
Important Information 5 F or assistance, please visit http://www .panasonic.com/consumersuppor t For best performance T on er car tridge an d drum unit L F or optimal perf or mance, gen uine P anasonic toner car tr idges and drum units are recommended.
T able of Content s 6 1. Table of Contents 1. Intr oduction and Installa tion Accessories 1.1 Included accessories .......................... 8 1.2 Accessor y inf or mation ........................ 9 Finding the Cont rols 1.3 Description of buttons ..
T able of Contents 7 8. Pr ogrammable Featur es Featur es Summary 8.1 Programming .................................... 57 8.2 Direct command char t ...................... 58 8.3 Basic f eatures ................................... 61 8.4 F ax features .
1. Intr oduction and Installation 8 F or assistance, please visit http://www .panasonic.com/consumersuppor t 1 Introducti on and Installation 1.1 Inc luded accesso ries *1 P ar t numbers are subject to change without notice. Note: L If any items are missing or damaged, contact the place of purchase.
1. Introduction and Installation 9 F or assistance, please visit http://www .panasonic.com/consumersuppor t 1.2 Accessor y information Accessories f or this unit can be ordered online , by f ax, or by telephone .
1. Intr oduction and Installation 10 F or assistance, please visit http://www .panasonic.com/consumersuppor t P { COPY } L T o switch to a cop y mode (page 21, 43). Q { SET } L T o store a setting during programming. R { SCAN } L T o switc h to a scan mode (page 21, 52).
1. Introduction and Installation 11 F or assistance, please visit http://www .panasonic.com/consumersuppor t 1.4.2 Rear view Re moving th e s hip ping ta pe Pull open the paper input tra y ( 1 ), then remov e the shipping tape ( 2 ), pad ( 3 ) and paper ( 4 ).
1. Intr oduction and Installation 12 F or assistance, please visit http://www .panasonic.com/consumersuppor t Installat ion 1.5 T oner car tridg e and drum unit The included toner car tridge is a star ter toner car tr idge. It wil l print about 800 letter-sized pages with a 5 % image area (page 93).
1. Introduction and Installation 13 F or assistance, please visit http://www .panasonic.com/consumersuppor t 7 Lift the co ver release le ver ( 1 ) and open the top cov er ( 2 ). Impor tant: L Close the multi-purpose input t ray ( 3 ) before opening the top cover .
1. Intr oduction and Installation 14 F or assistance, please visit http://www .panasonic.com/consumersuppor t 1.6 Documen t tray Inser t the doc ument tra y ( 1 ) into the slot ( 2 ) on the unit. 1.7 Output tra y This unit has 3 pieces of output tra y .
1. Introduction and Installation 15 F or assistance, please visit http://www .panasonic.com/consumersuppor t 1.7.2 Installing the o utput tray Inser t the output tra y ( 1 ) into the slots ( 2 ), then push the tra y down until it latches into place . L Repeat this step to install other output tr ays.
1. Intr oduction and Installation 16 F or assistance, please visit http://www .panasonic.com/consumersuppor t 3 Bef ore loading a stack of paper , f an the paper to pre vent paper j ams. 4 Load the paper , print-side up ( 1 ). Impor tant: L Push and lock the plate ( 2 ) in the paper input tray , if it is lifted.
1. Introduction and Installation 17 F or assistance, please visit http://www .panasonic.com/consumersuppor t Using the optional input tra y Y ou can add the optional input tra y (Model No. KX-F A101) . See page 9 for accessory inf or mation. A4, letter or legal siz e recording paper can be used.
1. Intr oduction and Installation 18 F or assistance, please visit http://www .panasonic.com/consumersuppor t 2 Bef ore inser ting a stack of paper , fa n the paper to pre vent paper j ams. 3 Inser t the paper , pr int-side down ( 1 ). 4 Adjust the width of the guides ( 1 ) to the size of the recording paper .
2. P rep ara tion 19 F or assistance, please visit http://www .panasonic.com/consumersuppor t 2 Preparatio n 2For assist ance, please visi t http://www.panasonic .c om/c onsumersupport Connections and Setup 2.1 Connectio ns Caution: L When you operate this p roduct, the power outlet should be near the product and easily accessib le.
2. Prep aration 20 F or assistance, please visit http://www .panasonic.com/consumersuppor t 2.2 T urn ing the power sw i tc h O N T ur n the power s witch to the ON position ( 1 ).
2. P rep ara tion 21 F or assistance, please visit http://www .panasonic.com/consumersuppor t 2.4 Selecting the operation m ode (F ax/Copy/Scan) This unit has three operation mod es. Y ou can select the desired mode b y pressing the one of the fol l owing b uttons.
2. Prep aration 22 F or assistance, please visit http://www .panasonic.com/consumersuppor t 2.6 Adjus ting v olu me Bef ore adjusting volume , set the operation mode to the fax mode (page 26) or the cop y mode (page 43). Ringer volume While the unit is idle , press {V} or {^} .
2. P rep ara tion 23 F or assistance, please visit http://www .panasonic.com/consumersuppor t L The accuracy of the cloc k is appro ximately ± 60 seconds a month. L After setting the date and time, if the unit is in the cop y mode, change to the f ax mode by pressing { FA X } .
2. Prep aration 24 F or assistance, please visit http://www .panasonic.com/consumersuppor t Note: L T o enter another character that is located on the same dial ke y , press { > } to mo ve the cursor to the next space . T o enter your logo Example: “ BILL ” 1.
2. P rep ara tion 25 F or assistance, please visit http://www .panasonic.com/consumersuppor t 2.9 Y our fax number 1 Press { MENU } . SYSTEM S ETUP PRESS [ () ] 2 Press {#} , then { 1 }{ 0 }{ 3 } . YOUR FAX NO. PRESS SE T 3 Press { SET } . L The cursor ( | ) will appear on the displa y .
3. F ax 26 3F a x Sen ding Faxes 3.1 Using the unit as a fax mac hine 3.1.1 Entering the fax mode Bef or e sending a f ax , set the operation mode to the fax mode.
3. F ax 27 L T o make lighter , press {V} . L T o make darker , press {^} . T o redi al the la st num ber 1. Press { REDIAL } . 2. Press { ST ART } . L If the line is b usy , the unit will automatical ly redial the number 1 time . L T o cancel redialing, press { ST OP } , then press { SET } .
3. F ax 28 7 Press { QUICK SCAN } to scan the document into memory . Example: PAGE S=01 01% STANDAR D u SCAN:P RESS SET SEND:P RESS STAR T 8 Place the ne xt page on the scanner glass. 9 Press { SET } . L T o send more pages, repeat steps 8 and 9. 10 Press { ST ART } .
3. F ax 29 a cop y of the document using the scanner glass and set the cop y instead.) – Chemically treated paper such as carbon or carbonless duplicating paper – Electrostatically charge d paper .
3. F ax 30 Helpful hints: L Y ou can confir m the stored items by printing the telephone number list (page 91). Note: L A hy phen or a s pace entered in a telephone number counts as 2 digits . T o c orrect a mistake Press { < } or { > } to mov e the cursor to the incorrect character/number , and then mak e the corre ction.
3. F ax 31 3.5 Sending a fax usin g one-touch dial feature and navigator directory Bef ore using this feature , store the des ired names and telephone numbers into one-touch dial f eature and navigator director y (page 29). L K eep the front cover page open f or button locations .
3. F ax 32 3.6 Broadcast transmission By storing one-touch dial and navigator directory items (page 29) into the broadcast memory , you can send the same docum ent to multiple parties (up to 20). Y our programmed items will remain in the broadcast memory , allowing frequent r e-use.
3. F ax 33 8 Press { ST OP } to e xit. 3.6.4 Sending the sa me document to pre-programmed par ties L Make sure that the { FA X } li ght is ON. 1 Inser t the document F ACE UP into the feeder . L Confirm that there are no do cuments on the scanner glass.
3. F ax 34 3.7 Receiving a fa x automatic ally – A uto answ er ON 3.7.1 Activating F AX ONL Y mode 1 Press { F AX A UTO ANSW ER } repeatedly to displa y the f ollowing. FAX O NLY M ODE 3 RINGS [ V^ ] L The displa y will show the ring setting in F AX ONL Y mode.
3. F ax 35 press {*} {# } { 9 } (default f ax activ ation code) firmly . L The unit will star t reception. 3. Replace the handset. Note: L T o receive f ax documents using the ex tens ion telephone, m ake sure remote f ax activati on is turned ON (feature #434 on page 64) beforehand.
3. F ax 36 – the fax ac tivati on c ode (feature #434 on page 64) Receiving a v oice message and fax document in o ne call The caller can lea ve a v oice message and send a f ax document during the same call. Inf orm the caller of the fol lowing procedure bef orehand.
3. F ax 37 T o dis play the junk fax prohibitor list 1. Press { MENU } repeatedly to displa y “ JUNK FAX PRO H. ” . 2. Press { > } repeatedly to displa y “ JUNK LIST DISP. ” . 3. Press { SE T } . 4. Press {V } or {^ } to displa y the items on the list.
4. Caller ID 38 4 Caller ID Caller ID 4.1 Caller ID ser vice This unit is comp atible with the Caller ID service offered by y o ur local telephone company . T o use this unit’ s Caller ID features, yo u must subscribe to Caller ID service . Make sure the f o llowing ring setting is set to 2 or more rings beforehand.
4. Caller ID 39 Display while viewing L When the unit could not receiv e a name, the disp lay will sh ow “ NO NAME RCV D ” . L When no calls ha ve been received, the disp lay will sh ow “ NO CALL ER D ATA ” . T o e dit a telephone number before calling back Press {*} repeatedly after step 2.
4. Caller ID 40 L If you assign an item to a s tation key which already contains an item, the pre vious item will be replaced. L If you use stations 1–3 as broadcast ke ys, you cannot store caller inf or mation for stations 1–3 (page 32). FLB851-PFQX2175YA-en.
5. Distinct ive Ring 41 5 Distincti ve Ring Distinctiv e Ring 5.1 Distinctive R ing serv ice fr o m y o ur phone company This ser vice is con venient if y ou wish to hav e a diff erent number f or your f ax machine and telephone, e v en when y ou use them on a s ingle telephone line .
5. Dist inctive Ring 42 5.4 Pr o gramming the ring pattern assig ned f o r fax L K eep the front cover page open f or button locations . 1 Set f eature #430 to “ ON ” (page 41). 2 Press { MENU } . 3 Press {#} , then { 4 }{ 3 }{ 1 } . 4 Press { 1 } to { 5 } to select the ring patter n assigned f o r f ax.
6. Cop y 43 6 Copy Copying 6.1 Using the unit as a copy machine 6.1.1 Entering the co py mode Bef ore copying, set the operati on mode to the cop y mode .
6. Co py 44 2. Press {V } or {^ } repeatedly to select the desired contrast. L T o make lighter , press {V} . L T o make darker , press {^} . Note: L Y ou c an sav e the pre v ious contrast setting in feature #462 (page 66). T o select the input tray and paper size 1.
6. Cop y 45 6.3 More copying features L K eep the front cover page open f or button locations . L Make sure that the { COPY } light is ON. 6.3.1 T o sor t multiple copies (A uto do cument feeder only) The unit can sor t multip le copies in the same order as the original document pages.
6. Co py 46 6.3.3 T o reduce a docume nt 1 Set the original. 2 Press { ZOOM } . 3 Press {V} repeatedly to select from “ 95 % ” to “ 50% ” by changing the reduction rate 5% at a time. 4 Press { ST ART } . 5 After you fin i sh copy ing, pres s { ST OP } to reset this fe atur e.
7. Multi-Funct ion Station software 47 7 Multi- Function Station software Setup 7.1 Connectin g to a computer P anasonic Multi-Function Station softw ar e enables the unit to carr y out the follo wing.
7. Multi-Function Station software 48 L Install Multi-Fun ctio n Stat ion bef ore connecting th e unit to a compu ter . If the unit is conn ected to a computer before installing Multi-Funct ion Station, the [ Found New H ard ware Wizar d ] dialog b ox w ill app ear .
7. Multi-Funct ion Station software 49 2. Select [ Uninstall ] and click [ Next ] , then fol l ow the on-screen instructions . Note: L If you w ant to uninstall each component, select [ Modify ] and clic k [ Ne xt ] in step 2, then fol l ow the on-screen instructions .
7. Multi-Function Station software 50 Note: L F or Microsoft P owerP oint ® , se lect [ Color ] or remov e the check ne xt to [ Gra yscale ] in the print dialog so that colored te xt will be pr inted in gr a yscale. 3 Select [ Panasonic KX-FLB851 ] as the active printer .
7. Multi-Funct ion Station software 51 7.4.4 En velope s Use env elopes designed f or laser printing. We recommend the f ollowing: – High quality en velopes of 90 g/m 2 (24 lb .
7. Multi-Function Station software 52 Scanning 7.5 Using the unit as a scanner L K eep the front cover page open f or button locations . 7.5.1 Using Multi-Function Viewer 1 Set the original. Using the auto d ocument feeder Inser t the document (up to 50 pages) F ACE UP into the f eeder until a single beep is heard.
7. Multi-Funct ion Station software 53 1 Set the original. Using the auto d ocument feeder Inser t the document (up to 50 pages) F ACE UP into the f eeder until a single beep is heard.
7. Multi-Function Station software 54 PC Fax 7.7 F ax sending/recei ving using Multi- Funct ion Station L K eep the front cover page open f or button locations . 7.7.1 Sending a com puter document as a fax message from your computer Y ou can access the fax function from a Windows application using Multi- Function Station.
7. Multi-Funct ion Station software 55 2. Select [ Received Log ] in [ Comm unica tio n Log ] . 3. Click [ File ] in the men u bar , then click [ Receive a F ax ] . L If feature #442 is ac tiv ated, the receiv ed f ax document will be automatic ally transf err ed to the computer .
7. Multi-Function Station software 56 L F or Windo ws XP and Windo ws 2000 users, clic k [ Printing Preferences... ] on the [ General ] tab . L The printer proper ties window will appear . 5 Select the desired output tr ay on the [ Output ] tab. L The selected output tra y will be set as defaul t.
8. Pr ogrammable Features 57 8 Progra mmable Features Features Summ ary 8.1 Pr o gramming 1 Press { MENU } . 2 Press {#} and the 3-digit code (page 61 to page 68). 3 Press the desired selection to displa y the desired setting. L This step ma y be slightly diff erent depending on the f eature.
8. Pr ogrammable Features 58 8.2 Direct co mmand char t F or more details on the f eatures, see page 61 to page 68. Note: L The f ollowing f eature will be displa yed only when the optional input tray is installed. F eature code: {#}{ 3 }{ 8 }{ 2 } L The f ollowing f eatures will be display ed only when the optional LAN board is installed.
8. Pr ogrammable Features 59 Ov erseas mode {#}{ 4 }{ 1 }{ 1 }{ 0 } : “ OFF ” { 1 } : “ NEXT F AX ” { 2 } : “ ERRO R ” (default) page 63 Dela yed send {#}{ 4 }{ 1 }{ 2 }{ 0 } : “ OFF ”.
8. Pr ogrammable Features 60 Output tra y setting for cop ying {#}{ 4 }{ 6 }{ 6 }{ 1 } : “ #1 ” (def ault) { 2 } : “ #2 ” { 3 } : “ #3 ” page 67 T oner save {#}{ 4 }{ 8 }{ 2 }{ 0 } : “ O.
8. Pr ogrammable Features 61 8.3 Basic features {#}{ 1 }{ 0 }{ 0 } Setting the quick setup QUICK SE TUP PRESS SE T Y ou can pr int out the quick fax s etup guide and select the desired receivi ng mode depending on your situation. { 1 } “ FAX ONLY ” (default): Use only as a f ax (page 34).
8. Pr ogrammable Features 62 { 0 } “ OFF ” (defaul t): The unit will not print the Caller ID list, but wi ll keep records of the inf or mation fo r the last 30 callers . { 1 } “ ON ” : The unit will print the Caller ID list automatically after ev er y 30 new calls (page 38).
8. Pr ogrammable Features 63 T o set the timer before returning to the def ault operation mode (f eature #463). { 0 } “ OFF ” : Deactiv ates this featu r e.
8. Pr ogrammable Features 64 company . This feature can be set up to 24 hou r s in adv anc e of the desired time . { 0 } “ OFF ” (default) { 1 } “ ON ” T o sen d a document: 1. Inser t the document into the auto document feeder . 2. If necessary , change to the desired resolution (page 26) and the des ired contrast (page 26).
8. Pr ogrammable Features 65 3. Press { 1 } to select “ ON ” . 4. Press { SE T } . 5. Enter your c ode from 2 to 4 digi ts, using 0–9, {*} and {#} . L The def ault code is “ ; #9 ” . L Do not enter “0000”. 6. Press { SE T } . 7. Press { MENU } .
8. Pr ogrammable Features 66 1. Press { MENU } . 2. Press {# } , then { 4 }{ 5 }{ 9 } . 3. Press { 1 } to select “ YES ” . 4. Press { SE T } . 5. Press { SE T } again.
8. Pr ogrammable Features 67 { 1 } “ ON ” : When making more than 4 sets of multiple copies , the unit w ill add a pause e very 3 sets of copies. Note: L If y ou select “ ON ” , the unit will displa y the fol l owing and stop cop ying after ev er y 3 sets of copies.
8. Pr ogrammable Features 68 Note: L If the optional LAN board is not installed, the computer connected to the unit by USB i s assigned as the ADMIN PC . {#}{ 5 }{ 0 }{ 0 } LAN setting with a DHCP server DHCP =ENABL ED [ V^ ] { 0 } “ DISABLED ” : Deactivates this f eature.
9. Help 69 F or assistance, please visit http://www .panasonic.com/consumersuppor t 9H e l p 9.1 Err or messages – Re por ts If a prob lem occurs during fax transmission or reception, one of the follo wing messages will be printed on the confirmation and jour nal repor ts (page 27).
9. Help 70 F or assistance, please visit http://www .panasonic.com/consumersuppor t 9.2 Err o r messages – Di splay If the unit detects a prob lem, one or more of the foll owing messages will appear on the displa y . Display Cause & Solution “ CALL SERV ICE ” L There is something wrong with the unit.
9. Help 71 F or assistance, please visit http://www .panasonic.com/consumersuppor t “ LOW TEM P. ” L The inside of the unit is extremely cold and cannot be operated.
9. Help 72 F or assistance, please visit http://www .panasonic.com/consumersuppor t “ REMOVE DO CUME NT ” L The document is jammed. Remov e the jammed document (page 85). L Attempted to send a document longe r than 600 mm (23 5 / 8 "). Press { ST OP } to remov e the document.
9. Help 73 F or assistance, please visit http://www .panasonic.com/consumersuppor t Troubleshooting 9.3 When a fun ction does no t w o rk, chec k here 9.
9. Help 74 F or assistance, please visit http://www .panasonic.com/consumersuppor t 9.3.3 Fax – sending 9.3.4 Fax – receiving I cannot operate the help function, adju st vo lumes or program the features. L The unit is set to the scan mode. Press { COPY } or { FA X } to switch to the copy mode or f ax mode.
9. Help 75 F or assistance, please visit http://www .panasonic.com/consumersuppor t I cannot receive documents automat ically . L The receiving mode is set to TEL mode . Set to F AX ONL Y mode b y pressing { F AX A UT O ANSWER } . L The time tak en to answ er the call is too long.
9. Help 76 F or assistance, please visit http://www .panasonic.com/consumersuppor t 9.3.5 Copying 9.3.6 Using an answering machine When an extension telephone is conn ected, I cannot receive documents by pressing {*}{ #}{ 9 } . L Y ou must set r emote f ax activati on to ON (feature #434 on page 64) beforehand.
9. Help 77 F or assistance, please visit http://www .panasonic.com/consumersuppor t 9.3.7 Multi-Function St ation I cannot retrieve recor ded vo ice messages on the answering machine from a remote location. L Y ou did not program y our remote access code into y our unit correctly .
9. Help 78 F or assistance, please visit http://www .panasonic.com/consumersuppor t 9.3.8 If a power failure occurs L The unit will not function. L The unit is not designed f or making emergency telephone calls when the power f ails. Al ter native arrangements should be made f or access to emergency ser vices.
9. Help 79 F or assistance, please visit http://www .panasonic.com/consumersuppor t Repl aceme nt 9.4 Replacing the tone r car tridg e and the dr um unit When the displa y shows the f ollowing, replace the toner car tr idge.
9. Help 80 F or assistance, please visit http://www .panasonic.com/consumersuppor t 4 T ap on the used toner car tridge se veral times to allow the remaini ng toner to fal l into the drum unit. Remov e the dr um and toner unit ( 1 ) by holding the tabs .
9. Help 81 F or assistance, please visit http://www .panasonic.com/consumersuppor t 9 T ur n the two green le vers ( 1 ) on the toner car tridge fir mly . 10 Make s ure that the triangles ( 1 ) match to install the toner cartr idge correctly . L If the lower glass ( 2 ) is dirty , c lean it with a soft and dr y cloth.
9. Help 82 F or assistance, please visit http://www .panasonic.com/consumersuppor t Jams 9.5 Recording paper jam 9.5.1 When the recording paper has jammed inside o f the unit The displa y will show the f ollowing. PAPER J AMMED b OPEN TO P COVER Caution: L Do not pu ll out the jammed paper forcibl y before opening the top cover .
9. Help 83 F or assistance, please visit http://www .panasonic.com/consumersuppor t Case 2: When the recording paper has jammed near the fuser unit: 1. Lift both green le vers ( 1 ) until they stop . 2. Remov e the jammed paper ( 1 ) carefully by pull ing it upwards.
9. Help 84 F or assistance, please visit http://www .panasonic.com/consumersuppor t 9.5.2 When paper jam occurs near the optional inpu t tray The displa y will show the f ollowing. PAPER J AMMED b OPEN LOW ER LEFT SIDE TR AY COVE R 1 Open the cov er ( 1 ) at the left side of the optional inpu t tray .
9. Help 85 F or assistance, please visit http://www .panasonic.com/consumersuppor t 9.5.4 When the recording paper in the multi-purpose input tra y is not fed into the unit properl y The displa y will show the f ollowing. CHECK PI CK UP INPUT TR AY #2 1 Remov e the recording paper and straighten.
9. Help 86 F or assistance, please visit http://www .panasonic.com/consumersuppor t 2 Remov e the jammed document ( 1 ) caref ully . When the document has jammed near the document entran ce: When the document has jammed near the document exit: 3 Close the ADF cov er .
9. Help 87 F or assistance, please visit http://www .panasonic.com/consumersuppor t 3 Clean the scanner glass ( 1 ) and the white cov er s heet ( 2 ) and its circumf erenc e ( 3 ) with a soft and dry cloth. 4 Close the ADF cov er ( 1 ), then hold the document cov er ( 2 ) while c leaning the white plate ( 3 ) and the scanner glas s ( 4 ).
9. Help 88 F or assistance, please visit http://www .panasonic.com/consumersuppor t 3. Inser t the hinges ( 1 ) into the slots ( 2 ) on the unit. 4. Close the document cov er . 9.7.2 Lower glass 1 T ur n the power s witch OFF . 2 Lift the cov er release lev er ( 1 ) and open the top cov er ( 2 ).
9. Help 89 F or assistance, please visit http://www .panasonic.com/consumersuppor t 4 Clean the lower glass ( 1 ) with a soft and dr y cloth. 5 Reinstall the drum and toner unit ( 1 ) b y holding the tabs . L Make sure that the triangles ( 2 ) match to install the drum and toner unit correctly .
9. Help 90 F or assistance, please visit http://www .panasonic.com/consumersuppor t 9.8 Cleaning the document feeder r ollers Clean the rollers when the document or recording paper frequently misf eeds.
10. Genera l Inf ormation 91 10 Gener al Info rmation Printed Repo rts 10.1 Reference lists and report s Y ou can pr int out the f ollowing li s ts and repor ts for y our r ef er ence. – “ SETUP L IST ” : Provides y ou with the current settings of the programming features (page 61 to page 68).
10. Genera l Informa tion 92 Specificatio ns 10.2 Specific ations ■ Applicable lines: Publi c Switched T elephone Network ■ Document size: Max. 216 mm (8 1 / 2 ") in width, Max.
10. Genera l Inf ormation 93 Recor ding paper specifications Recording paper / T ransparency / Label siz e: Letter : 216 mm × 279 mm (8 1 / 2 " × 11") Legal: 216mm × 356 m m (8 1 / 2 &quo.
10. Genera l Informa tion 94 Note: L The image area changes with the depth, thick ness and size of the characters . L If you turn on the toner sav e feature, the toner car tr idge will last appro x. 40% longer . Drum life The drum unit is a consumable item and needs to be replaced regularly .
10. Genera l Inf ormation 95 FCC and Other Information 10.3 FCC and Oth er Inf orm ation This equipment complies with P ar t 68 of the FCC rules and the requirements adopted by the A CT A. On the rear of this equipment is a label that contains, among other inf or mation, a product identifier in the f ormat US:ACJ----------.
10. Genera l Informa tion 96 the f ollowing measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver . — Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.
10. Genera l Inf ormation 97 Limited Wa rranty 10.4 Limited W arranty P ANASONIC CONSUMER ELECTRONICS COMP ANY , DIVISION OF P ANASONIC CORPORA TION OF NORTH AMERICA One P anasonic Wa y , Secaucus, New Jer sey 07094 P ANASONIC PUERT O RICO , INC. San Gabriel Industrial P ark, A ve .
10. Genera l Informa tion 98 Some states do not allow the e xclusion or limitation of incidental or consequential damages, or limitations on how long an implied Limited W arranty lasts, so the e xclusions may not apply to y ou.
10. Genera l Inf ormation 99 Cust omer S ervice s 10.5 Custome r Services d irector y Customer Services Director y P anasonic Puerto Rico, Inc. San Gabriel Industrial P ark, Ave.
10. Genera l Informa tion 100 Copyrights 10.6 Information of copyrights and licences L This product uses a par t of NetBSD kernel. The use of a par t of NetBSD kernel is based on the typical BSD style license below . Cop yright (c) The Regents of the University of Calif or nia.
10. Genera l Inf ormation 101 Cop yright (c) 1982, 1986, 1990, 1991, 1993 The Regents of the University of California. All rights reser ved. Cop yright (c) 1982, 1986, 1990, 1993 The Regents of the University of California. All rights reser ved. Cop yright (c) 1982, 1986, 1990, 1993, 1994 The Regents of the University of California.
10. Genera l Informa tion 102 Cop yright (c) 1996,1999 by Internet Software Consor tium. Cop yright (c) 1996-1999 by Internet Software Consor tium. Cop yright (c) 1997 Jonathan Stone and Jason R. Thor pe. All rights reser ved. Cop yright (c) 1997 Chr istos Zoulas.
10. Genera l Inf ormation 103 L This product contains Net-SNMP software and is using it based on the f ollowing license conditions. ---- P ar t 1: CMU/UCD cop yr ight notice: (BSD like) ----- Cop yrig.
10. Genera l Informa tion 104 ---- P ar t 3: Cambridge Broadband Ltd. copyright notice (BSD) ----- P or tions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd.
10. Genera l Inf ormation 105 D AMAGES (INCLUDING, BUT NO T LIMITED T O , PROCUREMENT OF SUBSTITUTE GOODS OR SER VICES; LOSS OF USE, DA T A, OR PROFITS; OR BUSINESS INTERR UPTION) HOWEVER CA USED AND .
11. Inde x 106 11 . Index 11.1 Index # #100 Quick setup: 61 #101 Date and time: 22 #102 Y our logo: 23 #103 Y our fax number: 25 #120 Dialing mode: 20 , 61 #121 Flash time: 61 #145 LCD displa y contra.
11. Inde x 107 F ax number (Feature #103): 25 F AX ONL Y mode: 34 F AX r ing count (F eature #210): 61 Flash time (F eature #121): 61 F r iendly reception (F eature #438): 65 H Help: 21 I Input tra y .
PFQX2 175Y A CM0705 EN1085 Free peace of mind, direct fr om P anasonic NO EXTRA COST ■ 1-year limited warranty 1 : par ts, labor , and toll-free help line 2 ■ Free o vernight replacement 3 and rep.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic KX-FLB851 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic KX-FLB851 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic KX-FLB851, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic KX-FLB851 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic KX-FLB851, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic KX-FLB851.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic KX-FLB851. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic KX-FLB851 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
