Manuel d'utilisation / d'entretien du produit P735 du fabricant Asus
Aller à la page of 150
P735 User Manual.
2 E3161 Second Edition April 2007 Copyright © 2007 ASUST eK Computers, Inc. All Rights Reserved. On part of this manual, including the products and software described in it, may be reproduced, transm.
3 T able of Contents P735 specications ............................................................................... 8 Package contents .................................................................................. 9 Chapter 1: Getting started Getting to know your P735 .
4 Chapter 2: Entering data Using the Input Panel ......................................................................... 28 Using the Block Recognizer .......................................................................... 28 Using the On-screen keyboard .
5 Making calls from Call History ....................................................................... 50 Using the Speed Dial .................................................................................... 51 Making and Receiving a video call .
6 Unlocking My Secrets ................................................................................... 76 Locking My Secrets ....................................................................................... 77 My Secrets setting.............
7 Remote Presenter ...............................................................................1 15 Using the Remote Presenter ........................................................................1 15 Setting ring tone ..........................
8 P735 specications Processor PXA270 processor , 520MHz Operating System Microsoft ® Windows Mobile™ 6 professional Pocket PC Phone Edition Memory 256 MB NAND Flash ROM 64 MB SDRAM Display 2.
9 Package contents Check your P735 package for the following items: P ASUS P735 device P Battery P AC Adapter P Mini-USB cable P Headset P Stylus P Protection case P Getting Started CD P User Manual P Quick Start Guide P W arranty Card NOTE: If any of the above items is damaged or missing, contact your retailer .
10.
1 1 Getting started C ha pt er • Getting to know your P735 • Getting your device ready • Starting up • The T oday screen 1.
12 Getting to know your P735 T op features Left side features Front features 4 6 1 1 Components : MiniSD slot Power button I Stylus Camera button V olume controller Reset button Notication LED Earp.
13 Getting to know your P735 Bottom features Right side features Rear features 26 27 24 Components : Camera ash light Self-portrait mirror Camera lens Speaker Battery compartment V oice commander/r.
14 Device components description No. Item Description 1 MiniSD slot Allows you to insert a MiniSD storage card. 2 Power button Press to turn the power ON or to set suspend mode or to wake device from sleep mode. Press and hold to turn the power OFF . 3 Stylus Use the stylus to write, draw , or select items on the touch screen.
15 Device components description No. Item Description 14 Navigation buttons Use to move through menus. Press the center to run an application or in camera mode, press to take a picture. 15 Action button Press to carry out the task of selected item. 16 Right Soft key Performs the task indicated above the button.
16 Installing the SIM card and battery Before you can make a phone call using your P735, you need to install a Subscriber Identity Module (SIM) card. The SIM card contains your phone number , subscriber details, phone book, and additional phone memory .
17 2. Remove the battery . 3. Insert the SIM card with its gold contacts facing down and the notched corner oriented to the upper left corner of the slot as shown. 4. Replace the battery into the compartment with its copper contacts properly aligned to the copper conductor on the device.
18 Charging the battery The bundled battery pack is shipped partially charged. Charge the battery up to four (4) hours before using for the rst time. T o charge battery: 1. Connect the AC adapter plug to the mini-USB connector at the bottom of the device.
19 Powering your device Make sure that your P735 is fully-charged before starting the device for the rst time. T o turn on power: 1. Press and hold the power button. Power button Starting up 2. Follow onscreen instructions to align screen and set the local time zone.
20 Calibrating P735 Calibrating your device ensures that the item you tap on the screen is activated. This involves tapping in the center of targets that appear in various coordinates on the screen.
21 T ap to open the Start menu T ap to setup date, time, and alarm T ap to launch Wireless Manager T ap to set user information T ap to open messages T ap to setup tasks T ap to setup prole T ap to.
22 Status indicators Refer to the table below for the T oday screen icon status indicators. Icon Description General Packet Radio Services (GPRS) available. Connecting via GPRS. Connected via GPRS. Connecting with ActiveSync ActiveSync connection not active.
23 Status indicators Icon Description New voice mail. No cellular phone service. No signal. Searching for cellular phone service. Indicates signal strength. Sound OFF . Sound ON. Battery low . Battery extremely low . Battery partially charged. Battery charging.
24 Status indicators Icon Description Wi-Fi active. Roaming service. This icon appears only if you have international roaming feature. Vibrate or meeting mode on. Bluetooth headset connected. Bluetooth headset connected with sound. Appears when you set the alarm No SIM installed.
25 Screen orientation Y ou can set the screen to three different orientations: 1. Portrait 2. Landscape (right-handed) 3. Landscape (left-handed) Set to Portrait mode to get a better view or better operation of certain applications on your device. Set to Landscape when viewing pictures, video or viewing longer text les.
26 Start menu The Start menu contains various programs and applications that you commonly use. T ap Start to display the start menu items: Y ou can also customize the items that appear in the Start menu. T o do this: 1. T ap Start > Settings > Personal tab > Menus .
27 Entering data C ha pt er • Using the Input Panel • Writing and drawing on the screen • Recording voice • Using ActiveSync™ • Synchronizing with Exchange Server • Searching information.
28 Using the Input Panel When you start an application or select a eld that requires text, symbols, or numbers, the Input Panel icon appears on the menu bar . The Input Panel allows you to select various input methods including: Block Recognizer , Keyboard, Letter Recognizer , and T ranscriber.
29 Using the On-screen keyboard With the on-screen keyboard, you can key in text, symbols, numbers, or other special characters when input is possible. T o input text using the on-screen keyboard: 1. In an application, tap the Input Panel arrow , then tap Keyboard .
30 Using the Letter Recognizer With the Letter Recognizer you can write individual letters, numbers, or special characters, which are converted into typed text. T o use the Letter Recognizer: 1. In an application, tap the Input Panel arrow , then tap Letter Recognizer .
31 Using the T ranscriber T ranscriber is a handwriting recognition program that allows you to write in cursive, print, or mixed styles. It reliably recognizes not only written text but also numbers and symbols. Make sure to write legibly . See Help for more information on the Transcriber .
32 W riting and drawing on the screen Y ou can write or draw directly on the screen and save notes in your own handwriting. If you prefer to use your own handwriting or use drawings in your notes, set the default input mode to Writing . If you prefer text, set the default mode to T yping .
33 Recording voice At any time, whether your phone is on stand-by or active mode, you can record sound, voice, or add a recording to a note while using your device. T o create a voice recording using Notes: 1. T ap Start > Programs > Notes . 2. From the Notes list, tap New .
34 T o add a recording to a saved note: 1. T ap Start > Programs > Notes . 2. From the Notes list, tap to open a saved note. 3. If you do not see the recording toolbar , tap Menu > View Recording T oolbar . 4. T ap the record icon to begin recording.
35 Using ActiveSync™ ActiveSync™ allows you to synchronize data in your device with data in your computer . ActiveSync can also synchronize over a wireless or cellular network with Microsoft Exchange Server , provided that your cellular phone service or company is running Microsoft Exchange Server with Exchange ActiveSync.
36 If you wish to synchronize your device with Exchange Server through your company or service provider , obtain the name of the Exchange Server , user name, password, and domain name from your network administrator before starting the Sync Setup Wizard.
37 Synchronizing via mini-USB Y ou can connect to your device using the bundled mini-USB cable to synchronize to your computer . T o synchronize your device via mini-USB: 1. After installing ActiveSync to your computer , connect the mini-USB plug to the mini-USB connector at the bottom of the device.
38 Synchronizing via Bluetooth Y ou can connect your device to your computer using the Bluetooth wireless technology . T o synchronize your device via Bluetooth: 1. Congure Bluetooth in your computer to support ActiveSync. Refer to the ActiveSync Help in your computer for instructions.
39 T o synchronize your device with Exchange Server: Synchronizing with Exchange Server 1. From the ActiveSync menu, tap Menu > Add Server Source . 2. In the Server Address eld, input the address of the server running Exchange Server then tap Next .
40 4. T ap the check boxes to select the data items that you want to synchronize with Exchange Server . T o change the available synchronization settings, select a data item then tap Settings . T ap Finish when done. 3. Input your name, password, and domain then tap Next .
41 Setting the synchronization schedule T o set the synchronization with Exchange Server: 1. From the ActiveSync screen, tap Menu > Schedule . 2. Refer to the table for input details. Recommended setup High Select a shorter interval in the Peak times list.
42 Searching information Using the search tool, you can search for les and other items stored in your device or the external MiniSD card. Y ou can search by le name or by words located in various applications including the Calendar , Contacts, Excel Mobile, Word Mobile, Outlook Mobile, Help, Messages, Notes, and T asks.
43 Getting Help Y ou can easily nd Help for using any program on the device. T o get help for a program: • From the T oday screen or program, tap Start > Help .
44.
45 Phone features C ha pt er • Using the phone • Making a call • Receiving a call 3.
46 Using the phone Like a standard cellular phone, you can use your P735 to make and receive calls. Y ou can also keep a history of calls made and received, send SMS or MMS messages, take notes while talking, call from Contacts, and copy data from installed SIM card to your device.
47 Adjusting the device volume T o adjust the device volume: 1. T ap the speaker icon. 2. From the volume menu, you can: • Adjust the phone volume or device volume by moving the slider to the desired volume level. • T ap On , Vibrate , or Off to change the system and ringer volume settings.
48 Y ou can make a phone call using the phone pad. Y ou can also make calls directly from the Contacts, Call History , Speed Dial, or V oice Commander . Using the phone pad T o make a call using the phone pad: 1. T ap Start > Phone . 2. From the phone pad, tap the number of the party you want to call then tap .
49 Phone pad features Press to delete number or symbol to the left Press to make call Press to launch menu Press to launch Contacts list and History calls/All Calls/Speech Dial Numeric keypad Press to.
50 Making calls from Contacts T o make a call directly from Contacts: 1. T ap Start > Phone . 2. T ap the contact showing above the phone pad, and then tap Call . Y ou can also launch Contacts from the T oday screen by tapping Contacts on the menu bar or pressing the Right soft key .
51 Using the Smart Dialer With Smart Dialer you can nd a contact more quickly . For example, if you want to call a contact named ‘Clara’, you can simply tap , and your device smartly matches it with your contact list and display the matched contact.
52 Making and Receiving a Video call Y our device allows you to make calls with live images. T o make a video call: • On the Phone pad, tap , or • From Call History , tap and hold a contact, then from the sub-menu tap Video Call .
53 Using V oice Commander T o make a phone call using voice commander: 1. Press the record button found on the right side of your device. 2. From the following screen, your device asks you to “Say command.” 3. Audibly say “Call <Contact> at <Home/ Work/Mobile>”.
54 When you receive a call, a message will appear giving you the option to answer or reject the incoming call. T o answer or reject an incoming call: • T ap Answer or press Call key to receive a call. • T ap Ignore or press End key to reject a call.
55 Wireless features C ha pt er • Using the Wireless Manager • Using Bluetooth ® • Using WLAN (IEEE 802.1 1b/g) • Setting a 3G/GPRS connection 4.
56 The Wireless Manager allows you to turn the power off or on to your wireless connections in a single location. This is a quick way to preserve battery power or to prepare your device for an airplane ight. T o use the Wireless Manager: 1. T ap Start > Settings > Connections tab.
57 Overview Bluetooth ® is a short-range wireless communications technology that allows devices with Bluetooth capabilities to exchange data within a radius of about 10 meters (30 feet) without requiring a physical connection. With Bluetooth enabled in your device, you can: • Connect and communicate (i.
58 Conguring Bluetooth T o congure Bluetooth in your device: 1. Start > Settings > Connections tab then tap the Bluetooth icon. 2. From the Bluetooth screen, you can access the following t.
59 Using a Bluetooth-enabled headset Mono headset setup 1. Make sure that Bluetooth is enabled on your device. 2. T ap on the T oday screen then on the shortcut menu tap Bluetooth Manager . 3. From the Bluetooth Manager , tap New. 4. From the Bluetooth Connection Wizard, tap Hands-free/Headset setup then tap Next .
60 NOTES: If the connection between the device and a Bluetooth headset fails, tap the device icon then reconnect, you do not have to pair the devices again 7. In Passkey , input the alphanumeric passkey of your headset device then tap . Y ou can nd this in the documentation that came with your headset device.
61 Stereo headset setup P735 supports A2DP (Advanced Audio Distribution Prole), which is used by Bluetooth-enabled stereo headsets. Make sure that your stereo headset also supports A2DP . 1. T ap on the T oday screen then on the shortcut menu tap Bluetooth Manager .
62 NOTES: • T o answer a phone call using your stereo headset, make sure that you have mono and stereo connection at the same time. • T o use voice commander while using a headset, press the answer button* on the headset then follow succeeding voice instructions.
63 Introduction WLAN (IEEE 802.1 1b/g), refers to certain types of wireless local area network (WLAN) that use specications in the 802.1 1 family . Activating WLAN in your device T o activate WLAN in your device: 1. T ap Start > Settings > Connections tab then tap the Wi-Fi Manager icon.
64 Conguring WLAN T o congure WLAN in your device: 1. Start > Settings > Connections tab then tap the Wi-Fi Manager icon. 2. From the Wi-Fi Manager screen, you can access the following tabs: • Wi-Fi Status • Setting • IP Info • Site Survey NOTE: T ap ? for Wi-Fi Help.
65 IP Info Displays the network information and allows you to renew or ping a network connection. Site Survey Shows the available wireless networks in the area.
66 Y our P735 allows you to connect via 3G and General Packet Radio Service (GPRS). They support a wide range of bandwidths that allows sending and receiving small bursts of data, such as email and web browsing. T o set a 3G/GPRS connection in your device: Setting a 3G/GPRS connection 1.
67 4. From the Connections screen, tap Add a new modem connection. 5. Input a unique name for the connection then select Cellular Line (GPRS) from the modem list.
68 6. Input the Access point name. 7. Input your user name, password, and domain then tap Finish . Contact your network administrator for assistance. NOTE: The GPRS and USB connections can not be used at the same time.
69 Connecting 3G/GPRS T o connect 3G/GPRS: 1. T ap Start > Settings > Connections tab then tap Connections icon. 2. From the Connections screen, tap Manage existing connections . 3. T ap and hold on an existing connection then from the pop-up menu tap Connect .
70 Disconnecting 3G/GPRS T o disconnect 3G/GPRS: 1. T ap or from the status bar . 2. From the pop-up callout, tap Disconnect . 3. T ap to exit. If you have set a default 3G/GPRS connection, it automatically connects when you launch an application that connects to the Internet.
71 Using the Network Setting T ool The Network Setting T ool allows you to conveniently select and connect to your 3G/GPRS service provider . T o connect via Network Setting: 1. T ap Start > Settings > Connections tab then tap the Network Setting icon.
72.
73 My Secrets C ha pt er • Using My Secrets 5.
74 My Secrets is a secret archive to keep your classied documents, pictures and videos. The items placed in the My Secrets folder are encrypted for protection. A user-dened password is required to unlock the folder or change the settings. Enabling My Secrets T o enable My Secrets using Express Mode (recommended): 1.
75 3. Key in a 4-digit password. 4. When prompted, key in the same password again to conrm. 5. T ap Finish . When nished, the My DocumentsMy Secrets becomes an encrypted folder . Y ou can now start using this folder . IMPORT ANT : • When locked, the My Secrets folder is hidden.
76 Unlocking My Secrets T o unlock My Secrets: 1. T ap the My Secrets icon on the T oday screen. 2. From the shortcut menu, tap Unlock . 3. Key in correct password.
77 Locking My Secrets T o lock My Secrets: 1. T ap the My Secrets icon on the T oday screen. 2. From the shortcut menu, tap Lock . The My Secrets icon changes to indicating that the My Secrets folder is locked.
78 My Secrets setting T o modify the My Secrets settings: 1. T ap the My Secrets icon on the T oday screen. 2. From the shortcut menu, tap My Secrets Setting .
79 Security Setting Security setting allows you to enable or disable autolock when the device enters sleep mode, lock the device now , or stop security .
80 Hint Set a hint in case you forget your password. • T ap check box to enable or disable use of hint to unlock the device. • Select one of the predened questions then key in answer.
81 Disabling My Secrets T o disable My Secrets: 1. From T oday screen, tap Start > Programs > My Secrets or T ap the My Secrets icon on the T oday screen and from the shortcut menu, tap My Secrets Setting . 2. Key in correct password. Select Security Setting tab, then tap Stop Security .
82 3. When prompted, tap Y es to conrm. 4. T ap Next to stop all running programs..
83 5. T ap Next to start decrypting les in My Secrets folder . 6. T ap Done when nished..
84.
85 Multimedia features C ha pt er • Using the camera • Viewing pictures and videos 6.
86 The built-in two-megapixel camera allows you to take photos and record audio/video clips. Launching the camera T o start using the camera: • T ap Start > Programs > Pictures & Videos > Camera icon or • Press the Camera button on the left side of your device.
87 Navigation button functions in camera mode The following describes the navigation button functions in Camera mode: ENTER/ACTION Button Forward Up Backward Down Up In camera preview mode, press for video mode. In the camera or video option menu, press to select menu items.
88 A vailable capture modes Y our device camera can be set to two capture modes: • Camera mode - Camera mode allows you to take photos, and save them to your device or MiniSD.
89 Camera mode screen The following describes the screen icons in Camera mode: Capture mode icon Picture quality icon Flash light status Macro mode status Default storage icon Scene mode icon Timer ic.
90 Camera mode icons • Capture mode icon [ / ] - indicates the current capture mode. • Picture quality icon [ / / ]- indicates the picture quality used. • Flash light status icon [ / / ] - indicates the camera ash status. • Macro mode icon [ ] - this icon appears when the camera is in macro mode.
91 Camera options menu The camera options menu allows you to change various camera and picture settings. T o launch options menu: 1. T ap Menu from the camera screen.
92 Change Mode The Change Mode option allows you to set capture mode into Camera or Video mode. Scene The Scene option allows you to select presets appropriately for a night scene or sports event. Select Auto to use best setting for any scene. Picture Size Allows you to set the frame size of picture.
93 Picture Quality This option provides three picture quality presets: Normal, Fine, and Super Fine. The picture quality is set to Super Fine by default. Flash Mode This option allows you to change the ash mode to suit a variety of lighting situations.
94 Zoom Allows you to change the maximum magnication allowed. SelfTimer Sets the delay of shutter release to 5 or 10 seconds after you have pressed the camera/shutter button. Burst Allows you to take 4 or 9 pictures in succession with one press of the camera/ shutter button.
95 Frame Allows you to set a frame. This feature is only available when the resolution is set to 320x240. Effect The Effect option allows you to apply some effects to the subject. Select from the following conguration options: Black-White , Negative , and Sepia .
96 Advanced This option allows you to set the following: - Filename prex format - Filename prex - File number - Date and time stamp - Shutter sound - Burst interval.
97 T aking photos After launching the camera, your device is set to Camera mode by default. If set otherwise, tap Menu > Change Mode > Camera Mode then tap Done . Y ou can also set to camera mode by tapping the camera mode icon on the screen. T o take a photo: 1.
98 Video mode screen The following describes the screen icons in Video mode: Capture mode icon Remaining video recording time Default storage icon Video resolution T ap to close camera T ap to zoom in.
99 Video mode icons • Capture mode icon [ / ] - indicates the current capture mode. • Flash light status icon [ ] - this icon appears when the ash light is enabled. • Macro mode icon [ ] - this icon appears when the video is in macro mode. • Default storage icon [ / ] - indicates default storage for captured video clips.
100 Video options menu The video options menu allows you to change various video and playback settings. T o launch video options menu: 1. T ap Menu from the video screen.
101 Change Mode The Change Mode option allows you to set your device into Camera or Video capture mode. Zoom Allows you to change the maximum magnication allowed.
102 Flash Mode This option allows you to change the ash mode to suit a variety of lighting situations. Macro Mode Enables or disables the macro photography feature. Save to Allows you to select the default storage location for recorded video. NOTE: Prepare a MiniSD card before setting default storage to Storage Card .
103 Effect The Effect option allows you to apply some effects to the subject. Select from the following conguration options: Black-White , Negative , and Sepia .
104 Recording videos Set the device to video capture mode to record videos. T o set video mode: T o record video: 1. Aim device to your subject then half-press camera/shutter button to auto-focus on subject. While camera/shutter button is half-pressed, the auto-focus frame appears on the center of the screen.
105 2. Full-press the camera/shutter button or press the navigation button action button to begin recording. The record indicator turns from green to red while video is recording. 3. Full-press the camera/shutter button or press the navigation button action button again to stop recording.
106 Use the Pictures and Videos Application to preview stored images and playback video clips. Viewing pictures and videos T o view pictures and videos: 1. T ap Start > Programs > Pictures and Videos . 2. T ap the picture or video clip you want to see.
107 Other features C ha pt er • Windows Live • Biz Card Recognition • Meeting Time Planner • Clean Reset • Internet Share • Flashlight • Remote Presenter • Setting ring tone 7 • W ak.
108 Windows Live Windows Live Windows Live on your device provides you a set of windows live service, including email, IM, and search. • See who among your contacts is online and chat with them by sending and receiving instant messages. • Access your hotmail account, if you have one, and send and receive e-mails.
109 2. T ap Sign in to Windows Live. From the screen appears, tap Accept . 3. Enter your e-mail address and password. Then tap Next. Windows Live Search: With Windows live search, you can quickly search the web for information, directions, maps and images.
1 10 Biz Card Recognition is a character recognition utility that scans and analyzes the appearance of character details on a taken picture of a business card. It then subsequently identies and categorizes the information then converts them to modiable text on your Contacts list.
1 1 1 3. T ake a clear picture of the business card. 4. If the picture is clear enough for processing, tap ‘ WorldCard Mobile ‘ to return to WorldCard menu; otherwise, tap ”T ry Again”. IMPORT ANT : • Make sure to clean the camera lens and provide enough lighting before taking a picture of business card.
1 12 7. T ap Export to save the information in Contacts. Refer below for other screen options and features. T ap the check box to include or exclude data eld T ap to change Category T ap the corresponding arrow to change data eld T ap to add a data eld T ap to save information to Contacts T ap to browse the business card 8.
1 13 Meeting T ime Planner allows you to nd a suitable time to have a video conference, telephone or net meeting with participants in different time zones. Using the Meeting Time Planner T o use the Meeting T ime Planner: 1. T ap Start > Programs > Meeting Time Planner .
1 14 Clean Reset allows you to delete all data and restore the default factory settings. T o perform a Clean Reset: 1. Press and hold the up button then reset using the stylus.
1 15 With Internet Sharing, your computer can use your P735 as a modem for connecting to the Internet. T o use the Internet Sharing: 1. Connect your device to the computer using Bluetooth or a USB cable. 2. T ap Start > Programs > Internet Sharing .
1 16 The integrated ashlight allows you to use your device as a torch in the dark. T o use the ashlight: 1. Press and hold the mode switcher button to turn on the ashlight. 2. A torch icon appears on the today screen. T ap or press and hold the mode switcher button again to turn off the ashlight.
1 17 From your P735 device, Remote Presenter allows you to remotely control PowerPoint™ presentations running on your desktop or notebook. Operating over a Bluetooth wireless connection, it promotes convenience and freedom of movement during your presentation.
1 18 3. From the list of Bluetooth devices found, select the name of computer containing your PowerPoint presentation then tap Next . The following describes the Remote Presenter menu on your computer screen. PowerPoint .ppt le path Bluetooth COM port T ap to change path T ap to start or stop T ap to exit 4.
1 19 5. From the Remote Controller menu on your computer , click to establish a connection. T ap to exit reminder . 6. When the connection is established, tap Connect .
120 8. T ap the name of PowerPoint (.ppt) le to show then tap Select . 7. Y our device prompts if the connection is successful or not. Repeat from step 1, if the connection failed.
121 Upon selection, Microsoft ® PowerPoint is automatically launched on your computer with the selected le open..
122 9. Y ou can now remotely control the PowerPoint presentation on your computer using your device. The following describes the control menu on your device.
123 With P735 you can add and congure your favorite music as your phone ring tone. Y ou can easily congure your favorite song or sound as your ring tone with the following compatible audio formats: aac, amr , .mp3, .wav , .wma, and .mid. Adding ring tone to selection T o add ring tone to the selection category under phone setting: 1.
124 Changing the ring tone T o change the ring tone: 1. T ap Start > Settings > Personal > Phone icon. 2. Select a ring tone from the Ring tone list box. The songs or sounds that you added as ring tone appears on this list along with the default ring tones that came with the device.
125 Y ou can set the wake-up actions whenever your device is in sleep mode. T o set the wake-up action: 1. T ap Start > Settings > Personal > W akeup source icon. 2. Select from the available wake-up actions. T ap Select All to select all actions or tap Select None to deselect all available actions.
126 Mode switcher allows you to easily switch between applications and tasks. T o use the mode switcher , press the mode switcher button on your device keypad. Press again to shift between applications. Y ou can also use the mode switcher button to turn the ash light on or off.
127 The System Information contains important device information including the current device settings and version. T o launch the System Information: 1. T ap Start > Settings > System > System Information icon. 2. T ap the Device Info tab for device hardware information.
128 This option allows you to restore the default factory settings. T o restore default settings: 1. T ap Start > Settings > System tab > Default Settings . 2. Input ‘1234’ in the Password eld to conrm that you want to restore to default settings.
129.
130 Device components status C ha pt er • ASUS Status icon 8.
131 The ASUS status icon allows you to easily check and see the current status of the following device components: CPU, USB, LCD brightness, Battery power , Memory , MiniSD card, and storage. T o check the status of these components, tap the ASUS Status icon on the T oday screen.
132 CPU mode setting Allows you to select the CPU mode (T urbo, Standard, Power Saving). T ap to check Automatic Mode to automatically change the CPU speed according to the CPU loading. USB setting Allows you to set the USB connection mode. • ActiveSync (T urbo mode) - allows a high speed serial connection between your device and PC.
133 LCD Brightness Adjusts the LCD brightness on battery power and external power . Power Displays the battery power status. The Advanced settings allows you to set a time when to turn-off the device if not used.
134 Memory Displays the total, in use and free memory . Storage card memory Displays the total, in use, and available storage card memory ..
135 ASUS Status Settings Allows you to select the items to display in the ASUS Settings pop-up menu. Programs running in memory Allows you to activate or stop any program running on memory . IMPORT ANT : When you exit a running program, you are actually only minimizing it and the program remains in the memory .
136.
137 A p p en dix • RF Exposure Information (SAR) • Notices • Safety information • Contact information.
138 RF Exposure Information (SAR) THIS MODEL MEETS INTERNA TIONAL GUIDELINES FOR EXPOSURE TO RADIO W A VES Y our mobile device is a radio transmitter and receiver . It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines.
139 Additional Information can be found on the websites of the World Health Organization (http://www .who.int/emf). * The tests are carried out in accordance with international guidelines for testing.
140 Replaceable batteries If an equipment is provided with a replaceable battery and if replacement by an incorrect type could result in an explosion (e.
141 Operator access with a tool If a T OOL is necessary to gain access to an OPERA TOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERA TOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERA TOR access.
142 W ARNING The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations.
143 ASUS Address: 15 Li-T e Road, Peitou, T aipei, T aiwan T el: 886-2-2894-3447; Fax: 886-2-2890-7698 Declaration We declare that the IMEI codes for this product, P735 , are unique to each unit and only assigned to this model.
144 Safety Information Phone care Y ou should never attempt to open the phone casing. There are no user-serviceable parts inside and you might damage sensitive electronic circuits and components.
145 • Use only the battery approved by the manufacturer. • Never replace the battery with a non-approved battery . • Never soak the battery in water or any other uid. • Never try to open the battery as it contains substances that might be harmful if swallowed or allowed to come into contact with unprotected skin.
146 Cleaning and storing • Y our phone should always be handled with care and protected from dirt, dust and dampness. T o avoid scratches, never place your phone face down. • If cleaning is necessary , switch the phone off and wipe carefully with a soft, slightly damp (not wet) cloth.
147 Electronic devices Most modern electronic equipment is shielded from RF energy . However , certain electronic equipment may not be shielded against the RF signals from your Pocket PC phone.
148 Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. Y ou should also consult the manufacturer of any equipment added to your vehicle.
149 Sparks in such areas could cause an explosion or re resulting in bodily injury or even death. Areas with a potentially explosive environment are often, but not always, clearly marked.
150 Contact information ASUST eK COMPUTER INC. (T aiwan) Hotline: 0800-093-456 (T oll-Free call from T aiwan only) Fax: 886-2-2895-9254 E-mail: http://vip.asus.com/eservice/techserv .aspx WWW: http://tw .asus.com ASUST eK COMPUTER INC. (Asia-Pacic) Hotline: 886-2-2894-3447 Fax: 886-2-2890-7698 E-mail: http://vip.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Asus P735 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Asus P735 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Asus P735, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Asus P735 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Asus P735, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Asus P735.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Asus P735. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Asus P735 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
