Manuel d'utilisation / d'entretien du produit DVD5000 du fabricant Palsonic
Aller à la page of 37
DVD5000 User's Manual DVD Player OIGITAL AUOIO.
Specifications ............................................................................................................................ Trouble Shooting ..............................................................................................
SHOCK TO PERSONS. Safety Precautions Introduction Welcome to purchase our DVD player. For perfect operation and security, please read the manual carefully and keep it for future reference.
Important Safety Instructions Introduction 1. READ INSTRUCTIONS All the safety and operating in- structions should be read before the product is operated. 2. POWER SUPPLY This product should be operated only on condition that the type of power supply corresponds to the marking label.
11. OBJECT AND LIQUID ENTRY Never push any kinds of object into this product through openings as they my touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill any kinds of liquid on the product. 12.
For safety, please use the original box and pack- ing materials, and the mode of packing same as the original. When you repackage this product. Do not let this product near the volatile liquid such as insecticide. Do not let the rubber and plastic touch this product for a long time, because these matter may imprint on the surface of this product.
Features Full compatibility with DVD, SVCD, VCD, CD, MP3, CD-R & CD-RW DOLBY DIGITAL and DOLBY PRO LOGIC 5.1 channels or 5 channels decoding DTS digital out Screen saver Multiple playing mode: mem.
Front Panel and Rear Panel Illustration .. Rear panel down- composite mix mix video left right main right optical coaxial surround surround S-video output output right left output sub woofer Introduct.
VFD Illustration The figure above shows the front panel with all the displays on. 1. Play indicator 2. MP3 indicator 3. CD indicator 4. DVD indicator 5. SVCD-VCD indicator 6. Repeat indicator 7. PBC indicator 8. Play indicator 9. Pause indicator indicator Wheel during playback.
5. OSD/SETUP button Remote Controller 1. STANDBY/ON button 2. TITLE button 7. SLOW FWD button backward button forward button button 13. Arrow buttons 15. STOP button 16. ENTER button 18. A-B repeat button 20. PLAY MODE button 22. EQUALIZER button 24. VOL/CH button 26.
RED Notes: Please set the audio out in 2 channel mode. (Refer to the "Audio Setup") There are three ways of connecting the player's AV output to the TV set.
Connecting to an AV Amplifier with RED WHITE YELLOW VIDEO IN Notes: 1. Set player's audio out in 2 channel mode. 2. Set the TV set's AV input to the channel you have connected. 3. Set the amplifier's audio input to the channel you have connected.
Notes: 1. Set player's audio out in 5.1 channel mode. 2. Set the TV set's AV input to the channel you have connected. 3. Set the amplifier's audio input to the channel you have connected.
Notes: 1. Either Optical or Coaxial digital audio output can be selected. 2. Set the player's audio out in Raw or PCM mode. 3. Set the amplifier's audio input to the channel you have connected.
Connecting to Headphones - YELLOW VIDEO IN Before you enjoy the headphones, please: 1. Set player's audio out to 2 channel mode. 2. Turn down the headphone volume to minimum. 3. Connect the headphones as above, and adjust the headphones volume with the volume knob.
Preparation before playing: 1. Connect your DVD player to the TV set and amplifier. 2. Turn on the TV set, and select the AV input to the channel you have connected. 3. Turn down the amplifier volume and turn on the power of amplifier, then select the Audio input to the channel you have connected.
Press key to change the items In stop mode, press OSD/SETUP key, and the TV screen will display the setup menu as the following: setup menu A.Press ENTER key to confirm B.
Language Setup 2. Select [DVD Subtitle], and press ENTER or key to display the [Subtitle] submenu: A. Press ENTER key to confirm Press key to change the items B. Press OSD/SETUP key to return to stop mode Press key to change the items A. Press ENTER key to confirm B.
Video Setup Select [Video] in the setup menu, and press ENTER key to display the [Video] submenu: Press key to change the items A. Press ENTER or key to setup B. Press RETURN or key to return to the setup menu Press key to change the items A. Press ENTER key to confirm B.
1. Select [Analog Out], and press ENTER or key to display the [Analog Out] submenu: Select [Audio] in the setup menu, and press ENTER key to display the [Audio] submenu: Press key to change the items A. Press ENTER or key to setup B. Press RETURN or key to return to the setup menu Press key to change the items A.
4. Select [Subwoofer], and press ENTER or key to display the [Subwoofer] submenu: Audio Setup 3. Select [ProLogic], and press ENTER or to display the [Pro Logic] submenu: Press key to change the items A. Press ENTER key to confirm B. Press OSD/SETUP key to return to stop mode Notes : [Auto]----It is subject to the disc.
Rating Setup Select [Rating] in the setup menu, and press ENTER key to display the [Rating] submenu: Press key to change the items Unlocked A. Press ENTER or key to setup B.
3. Select [Background], and press ENTER or key to display the [Background] submenu: Select [Others] in the setup menu, and press ENTER key to display the [Others] submenu: Press key to change the items Press key to change the items A. Press ENTER key to confirm B.
STAND BY/ON During the playback, press STAND BY/ON key, the player will stop playing and turn to standby mode, and the standby indicator turns on. While the player is in standby, press STAND BY/ON key or any key on the front panel, the player will start to work again, and the standby indicator turns off.
During playback, press OSD/SETUP key to display the current time of the disc playing. Remain time of the current track/chapter current track/chapter Elapsed time of the Press OSD/SETUP key again to display the current information of the disc playing.
Digital keys These keys are used to input the track, title, chapter numbers and time When the item with digits displays on the screen, press Digital keys you want.
Use the digital keys to input the desired [Time] or [Rel-Time] or [Title/Chapter] then press ENTER key to confirm. Notes : 1. During CD playback, press SEARCH key to display the [Track Search] menu, and press it again to display the [Disc Search] menu.
Press CLEAR key to delete the number you have input. It deletes one digital by pressing it once, and deletes all digits by pressing and holding it for over 2 seconds. Press PAUSE/STEP key during playback, and the playback will pause. Press PAUSE/STEP key again, and the picture forwards by a step.
* RETURN When the DVD or VCD/SVCD(PBC is on) is playing, press RETURN key to return to the program menu. Press it in setup menu, and the player will return to main menu or stop status. Press it in some function menus, and the current display will be cancelled.
PLAY MODE Press PLAY MODE key to display the [Play Mode] menu: Press key to change the items 1. Select [Repeat], and press ENTER or key to display the [Repeat] submenu: Press key to change the items A. Press ENTER key to confirm B. Press PLAY MODE or RETURN key to exit the menu Note : CD has no PBC item.
While [Program] is on, press ENTER key to display the [Program] submenu: Input the track number you want to play orderly. Then select [Play] and press ENTER key to play the tracks in the order you have set. Select [Clear All] and press ENTER key to clear all the numbers you have input.
Function Illustrations Remote Controller Operation EQUALIZER With equalizer, you can adjust 6 frequency bands independently. Note: This function is invalid for DVD & MP3. Press VOL/CH key, and [Channel/Volume] menu will display as the following: change the items 1.
1 Function Illustrations Remote Controller Operation During VCD/SVCD/DVD playback, press ZOOM key to enlarge the picture in a cycle as the following: During DVD playback Press ANGLE key, you can view the pictures from the different camera angles. Press it once, you can view the picture from one camera angle to the another.
MP3 Playing Function Illustrations Supported formats This set supports: Disc format: ISO 9660, Joliet Music file formats: MP3 MP3 bit rate (data rate): 32--320kbps but VBR can not be supported Total number of music files and albums: around 350 Sampling rate: 32kHz/44.
Unfinalized CD-R or CD-RW is not supported. The disc Others Please read the user's manual carefully before using the DVD player. If you have any troubles in using this player, try to solve the problems by the suggestions mentioned below.
Battery (R03) Specifications Power requirements: ~110-24OV 50/60Hz Power consumption: 25W Signal system: NTSC/PAL Weight: 3.2kg Dimensions: 430mm(W) x 260mm(D) x 75mm(H) (product) Video out Video out: 1.0V(p-p)/75 sync, negative polarity, RCA pin Jack x 1 S-video output connector(separate Y, C signal output connector): Y output: 1.
Remote Controller Preparation Others 1. Open the cover. 2. Insert batteries (R03). Make sure to match the "+" and "-" of the batteries with the marks inside the battery compartment. 3. Close the cover. Notes: Improper use of batteries may cause battery leakage and corrosion.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Palsonic DVD5000 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Palsonic DVD5000 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Palsonic DVD5000, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Palsonic DVD5000 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Palsonic DVD5000, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Palsonic DVD5000.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Palsonic DVD5000. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Palsonic DVD5000 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
