Manuel d'utilisation / d'entretien du produit NN47230-301 du fabricant Nortel Networks
Aller à la page of 60
Nor tel Secure Network Access Switch Software Release 1.6.1 Installing and Using Secur ity and Routing Element Manager (SREM) NN47230-301 (320199-D) ..
Document status: Standard Document version: 02.01 Document date: 16 July 2007 Copyright © 2007, Nor tel Networks All Rights Reser v ed. The inf or mation in this document is subject to change without notice.
Licensing This product includes software dev eloped by the OpenSSL Project for use in the OpenSSL T oolkit ( h ttp://www .openssl.org/ ). This product includes cr yptographic software written by Eric Y oung (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.
AD VISED OF THEIR POSSIBILITY . The foregoing limitations of remedies also apply to any dev eloper and/or supplier of the Software. Such dev eloper and/or supplier is an intended beneficiar y of this Section. Some jurisdictions do not allow these limitations or e xclusions and, in such event, the y may not apply .
5 Contents Preface 9 Before y ou begin 9 T ext conv entions 10 Related information 11 Publications 11 Online 12 How to get help 12 Chapter 1 Installing SREM 15 SREM installation precautions 15 System .
6 Contents Logging into a network access de vice 46 Saving a netw or k configuration 47 Opening a network configuration 47 Changing information within the SREM 48 Cutting, copying, and pasting data .
Contents 7 T able 2 Main SREM window 27 T able 3 File men u 29 T able 4 Edit menu 30 T able 5 View menu 30 T able 6 T ools menu 31 T able 7 Window menu 31 T able 8 Help men u 32 T able 9 T oolbar item.
8 Contents Nor tel Secure Network Access Switch Software Release 1.6.1 Installing and Using Secur ity and Routing Element Manager (SREM) NN47230-301 02.
9 Preface This document provides generic instr uctions f or installing and using the Security & Routing Element Manager (SREM) software. Security & Routing Element Manager (SREM) is a graphical user interf ace (GUI) that runs in an online, interactiv e mode.
10 Preface —End— T ext con ventions This guide uses the following te xt conv entions: angle brackets (< >) Enter text based on the description inside the brackets. Do not type the brackets when entering the command. Example: If the command syntax is ping <ip_address> , you enter ping 192.
Related information 11 italic text Variables in command syntax descriptions. Also indicates new terms and book titles. Where a variable is two or more words, the words are connected by an underscore. Example: If the command syntax is show at <valid_route> , valid_route is one variable and you substitute one value for it.
12 Preface • Release Notes for the Nor tel Secure Network Access Solution, Software Release 1.0 (320850-A) • Release Notes for Enterpr ise Switch Manager (ESM), Software Release 5.1 (209960-H) • Using Enter prise Switch Manager Release 5.1 (208963-F) Online T o access Nor tel technical documentation online, go to the Nor tel web site: www .
How to get help 13 3 Click Express Routing Codes on the TECHNICAL SUPPOR T web page. —End— Nor tel Secure Network Access Switch Software Release 1.6.1 Installing and Using Secur ity and Routing Element Manager (SREM) NN47230-301 02.01 Standard 1.6.
14 Preface Nor tel Secure Network Access Switch Software Release 1.6.1 Installing and Using Secur ity and Routing Element Manager (SREM) NN47230-301 02.
15 Chapter 1 Installing SREM The Security & Router Element Manager (SREM) is a graphical user interf ace that allows users to configure and monitor a variety of de vices, including the Nor tel Secure Network Access Switch 4050 (Nor tel SNAS 4050) and the Nor tel Secure Router 6200 Ser ies.
16 Chapter 1 Installing SREM T o replace an existing version of SREM, you must complete the uninstall process first. The uninstall process is launched when: — the SREM uninstall process is star ted.
Removing pre vious versions of SREM 17 Accessing the uninstall application If you attempt to install SREM in a f older that already contains a version of the software , then you are prompted to uninstall the e xisting v ersion automatically bef ore completing the install process.
18 Chapter 1 Installing SREM Step Action 1 Star t the SREM uninstall application. Note: The uninstall process can be star ted using steps described in "Accessing the uninstall application" (.
Removing pre vious versions of SREM 19 Figure 2 Uninstall Options 3 Select the uninstall type from the f ollowing options: • Complete Uninstall — Remove the e xisting instance of SREM completely . Continue with step 6 . • Uninstall Specific Features — Remove only specific f eatures from the existing SREM installation.
20 Chapter 1 Installing SREM Figure 3 Choose Product Features 5 Select only the f eature you wish to uninstall from the list. A description of a f eature appears when it is selected. T o remove all f eatures, click Pre vious and select the Complete Uninstall option.
Installing SREM on your system 21 Figure 4 Uninstall Complete 7 Click Done to e xit the uninstall application. —End— Installing SREM on y our system Step Action 1 Inser t the Software Install CD , or download the Installation file on your system, and bro wse to the srem_1.
22 Chapter 1 Installing SREM After the InstallAnywhere application is installed, the Secur ity & Routing Element Manager Introduction screen appears( Figure 6 "Introduction" (page 22) ).
Installing SREM on your system 23 4 Click Ne xt . The Choose Install Folder screen appears ( Figure 8 "Choose Install F older" (page 23) ). Figure 8 Choose Install Folder 5 Click Restore Default Folder to use the def ault location f or SREM, or click Choose to select a diff erent installation f older .
24 Chapter 1 Installing SREM Figure 9 Choose Shor tcut Folder 7 Confirm the default shor tcut location, or select the shor tcut path from the listed options.
Installing SREM on your system 25 Figure 11 Pre-Installation Summary 9 Re view your choices in the Pre-Installation Summar y screen. If the install or shor tcut folders are incorrect, click Previous to return to the appropriate screen and update that inf or mation.
26 Chapter 1 Installing SREM Figure 12 Install Complete 11 Click Done to e xit the installation. SREM is now installed on y our machine. For instructions on star ting the SREM software, see "Opening SREM" (page 38) "Opening SREM" (page 38) .
27 Chapter 2 SREM Screen Descriptions This section is a quick tour of the SREM screens and menus. General procedures f or opening and operating SREM can be found in Chapter 3 "Using SREM" (page 37) Chapter 3 "Using SREM" (page 37) .
28 Chapter 2 SREM Screen Descr iptions Screen element Description Toolbar items See "Toolbar items" (page 32) "Toolbar items" (page 32) . Tabs Screen areas that the user can select to monitor and configure additional device options.
SREM window areas 29 Menus This section describes the SREM menu a vailab le options. • File — Used to manage netw or k de vices and configuration files. Ref er to "File menu items" (page 29) "File menu items" (page 29) for details about the File menu items.
30 Chapter 2 SREM Screen Descr iptions Edit menu items The menu items a vailab le from the Edit menu are described in the f ollowing table T ab le 4 "Edit menu" (page 30) . Ta b l e 4 Edit menu Menu option Description Delete Delete the highlighted device or attribute.
SREM window areas 31 Menu option Description Tunnel Guard Open the Nortel Networks TunnelGuard Software and Rule Definition Tool. Domain Quick Wizard Open a wizard that helps you quickly create a domain.
32 Chapter 2 SREM Screen Descr iptions Help menu items The menu items av ailable from the Help menu are descr ibed in The f ollowing tab le T able 8 "Help menu" (page 32) . Ta b l e 8 Help menu Menu option Description Contents Open the SREM help system.
Indicator icons 33 Item Description Apply Update the selected device with new entries made on the Configuration and Monitoring Pane. New Window Open another SREM window with the same devices in the Device List. Second row < Open the previously displayed Configuration and Monitoring Pane.
34 Chapter 2 SREM Screen Descr iptions Screen icons Icons in the bottom, right cor ner of the SREM screen are descr ibed in The f ollowing table T ab le 11 "Screen icons" (page 34) .
Right-click men u 35 Figure 16 Statistics Manager tab Right-clic k menu Open the Right-click menu by highlighting a de vice or I/O and clicking the alternate, or secondar y button on your mouse. The right-click menu varies according to the de vice or parameter selected.
36 Chapter 2 SREM Screen Descr iptions F or descriptions of each r ight-clic k menu item, refer to The f ollowing tab le T able 12 "Right-clic k menu options" (page 36) . Ta b l e 1 2 Right-clic k menu options Menu option Description Go To Select to select an available tab from the Configuration and Monitoring pane.
37 Chapter 3 Using SREM This section provides procedures f or general or common SREM tasks. For more detailed SREM procedures and interface descriptions, ref er to the online help .
38 Chapter 3 Using SREM • "Viewing SREM online help" (page 38) "Viewing SREM online help" (page 38) Opening SREM Se ver al different methods e xist to access the SREM software , depending on the options selected during installation.
Accessing the SREM software 39 The online help content appears in a ne w web browser instance ( Figure 18 "SREM online help" (page 39) ). If the SREM screen that is activ e when online help is opened has conte xt sensitive help av ailable , then the content displa yed will related to that screen.
40 Chapter 3 Using SREM Icon Name Description Show in Contents Show the displayed page in the navigation tree. This icon is only available when the navigation tree is already visible. Previous Display the previous page of online help content. Next Display the next page of online help content.
Managing network access de vices from the SREM 41 3 Change the desired settings, as descr ibed in the follo wing table T able 14 "SREM Options" (page 41) . Ta b l e 1 4 SREM Options Option Description Application Look and Feel Allows you to configure how the application looks.
42 Chapter 3 Using SREM • "Grouping network access de vices in SREM" (page 44) • "Modifying network inf or mation" (page 46) • "Logging into a network access device".
Managing network access de vices from the SREM 43 Figure 20 New Device screen 3 Enter the connection details f or this new de vice in the applicable fields. the f ollowing tab le T ab le 15 "New De vice fields" (page 43) describes the New De vice fields.
44 Chapter 3 Using SREM Field Description The default value is public. Note: This field is not editable in this release. 4 Click Create . SREM will attempt to connect to the network access device . One of two results f ollows: • If SREM connects to the network access device successfully , the network access de vice appears in the Device List.
Managing network access de vices from the SREM 45 Step Action 1 Right-click the Ne w icon in the De vice List, and select New Sub Network in the right-clic k menu ( Figure 21 "Right-clic k menu" (page 45) ).
46 Chapter 3 Using SREM SREM finds the new de vice and adds it to the Sub Network. 7 Continue configuring the new de vice and adding ne w de vices to the Sub Network, as required. —End— Modifying network inf ormation Use the f ollowing procedure to rename an e xisting network or Sub Network using the SREM.
Managing network access de vices from the SREM 47 —End— Saving a netw ork configuration Use the follo wing procedure to sav e information you configured for a network access device . Step Action 1 Configure the network access device as required.
48 Chapter 3 Using SREM Step Action 1 Open SREM. 2 Select File > Open . The Open dialog bo x appears ( Figure 24 "Open dialog bo x" (page 48) ). Figure 24 Open dialog box 3 Navigate to the Netw or k Configuration File (.xvn) y ou want to open.
Changing information within the SREM 49 Cutting, copying, and pasting data between devices Cut, cop y and paste information between de vices, such as interface cards , to sav e time when y ou enter data. If y ou are entering similar data for se v eral de vices, SREM allows you to cut, copy and paste information between de vices.
50 Chapter 3 Using SREM 6 Click OK . —End— Changing field values in the SREM SREM uses standard Windows components to displa y and edit inf or mation. The most common components includes editable te xt bo x es, lists to select from, and checkbo x es to select.
Managing changes within the SREM 51 Step Action 1 Click Appl y on the toolbar to send changes to the de vice. Changes to the active SREM screen are sent to and stored on the de vice, but are not yet made permanent. 2 Click Commit on the toolbar to make all applied changes permanent on the de vice.
52 Chapter 3 Using SREM Figure 27 Change Manager tab 4 Re view the pending changes, as described in the f ollowing table T able 14 "SREM Options" (page 41) . Ta b l e 1 6 SREM Options Option Description Device Name Displays the device where the change was made.
Managing logs and statistics within the SREM 53 Step Action 1 Open SREM. 2 Click the Statistics Mana ger icon in the bottom-right cor ner of the SREM window to open the Statistics Manager tab ( Figure 28 "Statistics Manager tab" (page 53) ).
54 Chapter 3 Using SREM • Select A uto Refresh or Logging f or any list item to toggle that setting. Note: T o vie w additional details about any of the statistics being trac ked, double-clic k the Statistics Manager list item. SREM displa ys the screen where the selected statistic is track ed and configured.
Using the Log Browser tool 55 Note: When using Log Browser , the Retriev al Criter ia and Details sections can be viewed or hidden by clic king the small arrows beside the section name. Hide these sections as necessar y to see the entire Log Browser tool on systems with low screen resolution.
56 Chapter 3 Using SREM Figure 31 Retriev al Criteria — Summary View 8 Click Retrie ve to displa y all log entr ies that match the specified criteria. The Retriev al Results section displa ys the number of matches discov ered, and lists all log entries in the retrie val table .
57 Inde x A add network access de vice 42 C conv entions, te xt 10 customer suppor t 12 D delete network access de vice 44 E edit menu 30 F fields SREM 50 file menu 29 G group network access de vice.
58 Index O open network configuration 47 SREM 38 P precautions install 15 product suppor t 12 publications 12 Q quit SREM 38 R requirements install 16 right-click menu 35 S save changes 50 network configuration 47 settings SREM 40 SREM fields 50 help 38 log browser 54 open 38 quit 38 sav e changes 50 settings 40 suppor t, Nor tel 12 s witch.
.
Nor tel Secure Network Access Switch Software Release 1.6.1 Installing and Using Secur ity and Routing Element Manager (SREM) Copyright © 2007, Nor tel Networks All Rights Reser v ed. Publication: NN47230-301 Document status: Standard Document version: 02.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Nortel Networks NN47230-301 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Nortel Networks NN47230-301 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Nortel Networks NN47230-301, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Nortel Networks NN47230-301 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Nortel Networks NN47230-301, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Nortel Networks NN47230-301.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Nortel Networks NN47230-301. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Nortel Networks NN47230-301 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
