Manuel d'utilisation / d'entretien du produit 4BL du fabricant Night Owl Optics
Aller à la page of 52
Rev. 110402.
TABLE OF CONTENTS FCC RADIATIO N NORM: ............................................................................................................ ..................................... 2 PACKAGE CO NTENTS: ............................................
User’s Manual 1 5.2.13 Sy stem .................................................................................................................. ...................................... 38 5.2.13.1 Da te/Time .........................................
User’s Manual 2 FCC RADIATION NORM: FCC This equipment has been tested and found to comply with limits for Class B digital device pursuant to Part 15 of Federal Communi cations Commission (FCC) rules. FCC Compliance Statement These limits are designed to provide reasonabl e protection against frequency interference in residential installation.
User’s Manual 3 PACKAGE CONTENTS: Your new Security Camera and DVR Kit will ship with the following items. 4BL-45GB SYSTEM REQUIREMENTS: Please be sure the computer that you install t he included so.
User’s Manual 4 SAFETY INSTRUCTION: 1. Use proper power source. Do not use this product with a power source that applies more than specified voltage (100-240V AC). 2. Never insert any metal in to the DVR or any openings. Putting metal into the DVR case can cause danger of electric shock.
User’s Manual 5 CHAPTER 1: DVR FEATURES Other Features ： • H.264 compression • Real time recording on 4 channels • USB Backup to flash drive • T riplex operation: view , record, playback s.
User’s Manual 6 CHAPTER 2: LAYOUT 2.1 Front Panel (Please refer to actual product for det ail) Item Buttons / Indicators Marks Functions 1 Channel Select: CH1 CH2 CH3 CH4 Select which single channel.
User’s Manual 7 2.2 Rear Panel (Please see actual product for det ail) Item Physical ports Connection method 1 Power Port Connect power supply - DC12V 3A 2 PTZ Pan Tilt Zoom Output to PTZ enabled ca.
User’s Manual 8 2.3 Remote Control The remote control is the secondary input device for navigating t he system’s interface. To use the remote control: 1-4 Channel Select 1-4 5-9 Digit Key 5-9 0 Di.
User’s Manual 9 2.4 Mouse Operation You can use a mouse instead of t he front panel buttons or remo te control to navigate the operation of your DVR The mouse is the primary input dev ice for navigating system menus. To use a mouse with the system: 1.
User’s Manual 10 Chapter 3: DVR/Camera installation 3.1 Connecting the DVR to a TV or Monitor Using the supplied BNC to RCA connector 1. Connect the BNC to RCA connector to the back of the DVR labeled Video Output (refer to Chapter 2.2, Rear Panel Picture) 2.
User’s Manual 11 CHAPTER 4: DVR ST ART UP 4.1 System Initialization After connecting the power adapter and turning on the power, the syst em will boot-up and start initializing. 4.2 Main Interface After initialization, the main in terface will load.
User’s Manual 12 CHAPTER 5: DVR MENU AND OPTIONS Mouse Only When using the mouse, use t he Sub-Menu to access several system options, including the Main Menu.
User’s Manual 13 5.1 Main Menu Preview Internet / LAN Camera Settings E-mail Setup Alarm Setup PTZ Mobile Motion Record Password Advanced Language Date/Time Record Functions Playback System Camera N.
User’s Manual 14 5.2 Main Menu Right-click the mouse, a pop- up menu will be displayed on the screen. Click “MAIN MENU” button on the pop-up menu to enter into Main Menu. You can also use the Menu button on the front panel to open the Main Menu.
User’s Manual 15 5.2.1.2 Motion To configure the Motion Det ection function of the DVR, click “MAIN” “Recording Functions” “Motion” to enter the Motion Detect Setup window. Channel : Choose the channel you would like to configure to have specific motion detection function.
User’s Manual 16 5.2.2 Playback To play a recorded video, select “Main Menu” “Playback” Functions to open the RECORD SEARCH menu. To search for a file, enter specific date and click “SEARCH”, you will find all the recordings of that day.
User’s Manual 17 5. Click BACKUP from the side-panel to immediately begi n copying the files to the USB flash drive. NOTE: Backup progress appears in the status window . DO NOT remove the USB flash drive during backup. 6. The system will create a folder on the USB flash drive named RecordF ile .
User’s Manual 18 5.2.3 Network Setup – In tranet (Internal Access) To access the NETWORK SETUP menu, select Main Menu NETWORK to open the NETWORK SETUP menu.
User’s Manual 19 5.2.4 Network Setup – Global Access (C onnected Directly to Modem) To access the NETWORK SETUP menu, select Main Menu NETWORK to open the NETWORK SETUP menu.
User’s Manual 20 STATIC IP 1. Select STATIC as the network TYPE. 2. Leave Media Port at 9000 3. Setup WEB Port (leave at 80 but some ISPs block inbound traffic on port 80 to pr event web servers so if the DVR cannot be remotely accessed choose a different port number) 4.
User’s Manual 21 5.2.5 Network Setup – Global Access (Conn ected through a Router or Firewall) To access the NETWORK SETUP menu, select Main Menu NETWORK to open the NETWORK SETUP menu.
User’s Manual 22 5.2.6 Port Forwarding To access the DVR from a remote computer over the internet via internet browser (Internet Explorer). 1. Forward Port 80 and Port 9000 in the router attached to the DV R, to the IP address of the DVR.
User’s Manual 23 3. On the next page that opens, c lick on the “Default Guide” link. This will take you to the port forwarding instructions for your router . 4. When you access the DVR from a remote co mputer , you also need to use a different address in the Internet Explorer browser window .
User’s Manual 24 You can ask your ISP if they can provide you with a static IP address or you can eliminate the need to enter an IP address by using our DDNS server at www. nightowldvr.com. DDNS allows you to enter a normal style internet address into y our browser and it will find yo ur camera, even if you have a dynamic IP addre ss.
User’s Manual 25 3. Access Custom Security Level Select the “Security” tab Select “Custom Level…” 4. Enabling all Active X Controls On this page scroll down to the ActiveX Controls and Plug Ins, and set all to either PROMPT or ENABLED.
User’s Manual 26 5.2.9 Mobile Setup If you would like to allow your DVR to be accessible by a Mobile device, Click “MAIN MENU” “Network” “Mobile” to open the “MOBILE” menu. USER NAME: is the user name to enter when logging into the DVR.
User’s Manual 27 4. After installation finishes, click the icon nam ed “Asee” to run the pr ogram. This will disp lay the program screen. 5 . Click the “Setting” butt on to enter the Setting menu 6. Enter login information. User name: same as the user name setup in DVR under section 5.
User’s Manual 28 3. After the phone finishes copying the file, it will ask for permission to install the program. Select “ Continue ” to start the installation. 4. Click the “ Continue ” button on the informati on box displaying the program and current version.
User’s Manual 29 When accessing with an iPhone ® follow these procedures: 1. From you iPhone ® Select “ App S t ore ” from your home screen. 2. Select the Search icon. 3. T ype: “ Asee ” in the search field. 4. Download and inst all the “ Asee ” Application.
User’s Manual 30 5. Under the “ Add/Remove Applications ” pane, click “ Start ” Button. 6. Click the “ Browse… ” button and locate the “ ASee.alx ” file on the included CD. Select the “ ASee ” file under “ Device application selection ” and click “ Next ”.
User’s Manual 31 2. To run the application, the Blackberry viewer is installed in the “ Downloads ” directory 3. Open the “ Downloads ” folder, and then click the “ ASee ” icon to open the viewing interface.
User’s Manual 32 5. Select the Network Type supported by your phone. 6. Click the “ Save ” button to save the settings, and system will return to Live display. You can save the connection settings for different DVRs when you give the Settings different names under Settings and click save.
User’s Manual 33 To navigate in live view mode: 1. Click “ Next Channels/Group ” icon to switch channels, and then choose the channel you want to display. 2. Click the “ Full screen ” icon to view in full screen display mode, click the “ Trackball ” on the mobile phone to quit full screen mode.
User’s Manual 34 When accessing from a mobile phone with Android ® phones, fo llow these procedures: 1. Download the Android so ftware from our website ( www.nightowlsp.com/support.htm ), decompress and store the downloaded softwar e in an easy to remember location.
User’s Manual 35 8. Goto “ All Programs ” and select “ ApkInstaller ”. 9. Locate the “ ASee.apk ” on the included CD and copy to your phone 10. Select and install the software to your phone. 11. Goto “ All Programs ” and select the “ ASee ” icon.
User’s Manual 36 12. The “ ASee ” main interface will be displayed. The functions of the various icons are as follow: 1 ---Channel Select 2 ---Pan/Tilt Control 3 ---Zoom +/- 4 ---Focus +/- 5 ---Iris +/- 6 ---Play/Pause, Snapshot, Setti ngs, Next Channel Group, and help.
User’s Manual 37 Set the e-mail account information of your mail server. Please contact your Network Ad ministrator for details and configuration settings. 5.2.12 Camera 5.2.12.1 Camera Setup To set up your cameras , select “Main Menu” Camera Camera Settings to open the CAMERA SETUP menu.
User’s Manual 38 5.2.13 System 5.2.13.1 Date/T ime Click “ Main Menu ” “SYSTEM” “DATE/TIME” to enter t he TIME SETTING window to modify system date, time, date/time form at and time zone, DST (day saving time).
User’s Manual 39 5.2.13.3 Language Click “Main Menu” “System” “Language” to setup the default system language. 5.2.13.4 Hard Drive To manage the installed Hard Disk, click “Main Menu” “System” “Advanced” “Hard Drive” to enter “HDD MANAGEMENT”.
User’s Manual 40 5.2.13.6 System Maintenance Click “Main Menu” “System” “Advanced” “Maintain” to access the SYSTEM MAINTENANCE page of your DVR. This option allows you reset the DVR to factory default settings, update system software (firmware), and set system auto reboot time.
User’s Manual 41 5.4 PTZ Control 5.4.1 Cruise Setup Open PTZ setting menu if you want to setu p crui se function (system default: on), and set up cruise channel, cruise points etc. 1. Channel Select: Select the channel of the installed PTZ camera. 2.
User’s Manual 42 CHAPTER 6: NET-VIEWER PROGRAM Open Internet Explorer and enter the IP Address or DDNS address of your DVR. A pop-up will ask you to install an ActiveX (plug-in) to your com puter. Please confirm the download and install the software.
User’s Manual 43 6.2 Main Interface of Net-viewer 6.2.1 Menu column Menu column includes “Live”, “Playback”, “R emote Setting”, “Local Setting” and “Logout”. 6.2.1.1 Live After Logging-in to system, system will enter in to Live display.
User’s Manual 44 6.2.1.3. Remote Setting Clicking “Remote Setting” opens this sub menu, option in this menu includes “Record”, “Network”, “Camera”, and “System”.
User’s Manual 45 6.2.2 Play Control 6.2.3 PTZ Control 6.2.4 Remote Backup You can backup recorded video files from your syst em to your PC using the Replay menu in the remote surveillance software. To backup files remotely: 1. Click Playback at the top of the main screen.
User’s Manual 46 6.2.5 Multi Player File format 1. If you would like to play any recorded file us ing video players that supp orts .avi format, first, copy or backup file to your PC. 2. Use the AVI Generator software included in the driver CD and install AVI Generator to your computer.
User’s Manual 47 WARRANTY NIGHT OWL, LLC (“Night Owl”) provides the following wa rranty to the origin al re tail purchaser only (the “Purchaser”) with respect to this product (the “Product”): For a period of one (1) year after th e date of sale, the Product shall be free from m anufacturing defects in material and workmanship.
User’s Manual 48 salespeople, retailers, dealers or dist ributors to the contrary are not aut horized by Night Owl, and do not affect this provision of this warranty. Returns under this Warranty In order to obtain service, please make sure that you have registered your product on-line no later than thirty (30) days after purchase at www.
User’s Manual 49.
User’s Manual 50.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Night Owl Optics 4BL c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Night Owl Optics 4BL - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Night Owl Optics 4BL, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Night Owl Optics 4BL va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Night Owl Optics 4BL, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Night Owl Optics 4BL.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Night Owl Optics 4BL. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Night Owl Optics 4BL ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
