Manuel d'utilisation / d'entretien du produit F-65 du fabricant Muratec
Aller à la page of 114
Operating Instructions For Muratec’s F-65 plain-paper fax machines.
One-T ouch Keys Press T o: Program A 1 Enter Enter a one-touch key ““ 2 Enter Erase a one-touch key ““ 3 Enter Print a list of one-touch keys Speed-Dial Numbers Program B 1 Enter Enter a speed.
Welcome ….
As an E NERGY S TAR ® partner, Muratec America, Inc., has determined that this product meets the E NERGY S TAR guidelines for energy efficiency. Copyright © 1998 by Muratec America, Inc.; all rights reserved. Muratec, the Muratec logo and all Muratec fax product names contained herein are trademarks of Muratec America, Inc.
We’ve divided these operating instructions into three sections. • “Getting started” (see page 1.1) covers only what you absolutely have to know to use your machine immediately.
What’s in these operating instructions Note: Each section also contains its own (more abbreviated) table of contents, as well. Getting started What’s in this section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F -code transmission and polling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.25 F -code transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.25 F -code polling . . . . . . . . . . . . . . . . .
Getting started A quick and friendly trip through the basics of your Muratec fax machine.
1.1 Getting started A quick introduction to fax in general . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Take it out of the packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 What are all the parts? .
The drawing below shows what should be included in the packaging: * These parts are installed in the fax machine. ** This ferrite core will be used with an RS-232C cable if you decide to use the PC - FAX feature (see page 2.50). The RS-232C cable is not included with this fax machine.
6 Document separator — Helps your printed documents stack easily. 7 Paper tray — Supports printed documents discharged from the printed doc- ument exit. You can also slide it out to allow for larger documents. 8 Printed document exit — Where the printout (fax or copy) emerges.
Important: Some of the functions we’ll mention, here, are covered in the “Beyond the basics” section, which begins on page 2.1. 1 Liquid crystal display ( LCD ) — The display (1-line × 16-character) which shows the machine’s status and lets you see what you’re entering during vari- ous operations.
7 CANCEL — Press this key to delete characters on the LCD and cancel com- mands you have entered into the machine. CONTRAST — When a document is in the document feeder, press this key to toggle among normal, dark or light contrast settings.
1.6 Getting started Pick an installation spot first Where should you install your fax machine? The location should be: • Clean — Dust buildup can damage your machine. • In the open — Allow at least 12 inches of clearance around your machine. N ever cover the machine.
2 Take off the cover. 3 Push the paper plate down until it locks into position. 4 Adjust the paper setting to the letter or legal position depend- ing upon the size you are using. When you use legal-sized paper, pull the front part of the cas- sette toward you.
Attaching the paper-handling parts 1 Attach the document hopper by inserting its two pegs at a slightly upward angle into the appropriate holes. 2 Attach the document separator into the appropriate holes, as shown. Plug in and power up 1 Plug one end of the curled handset cord into the HANDSET jack on the left side of your machine.
1.9 Getting started 2 To change the setting, press or once or twice until the paper size you are loading appears. In this example, we chose legal-sized paper.
1.10 Getting started 4 Turn the ink film cartridge over and rest it upside down on its handles. 5 Grasp the cartridge frame firmly and slide out the ink film rolls from the cartridge. 6 Remove the gears from the ends of the used film rolls. Note: Please dispose of the used rolls properly.
1.11 Getting started When you install a new ink film Important: Use this setting only when you are installing a new ink film. Your fax machine indicates the ink film remaining by pressing FILM (see page 1.5) to let you know when it needs to be replaced.
EasyStart is already installed on your fax machine. Use it to guide you in entering the bare-bones settings required for normal operation. If necessary, you can always make changes to these settings later.
Use the numeric keypad to enter your fax number. To put in a dash for easier reading, press DIALING OPTIONS once. The number may contain up to 20 char- acters (numbers and dashes).
1.14 Getting started 10 To change the setting, press or once or twice until the mode you want appears. Here, we changed the setting to Pulse mode: 11 Press ENTER to save the setting.
Some guidelines How big — and small — your pages can be You can fax a piece of paper as small as a notepad sheet or nearly 3 feet long! To be precise, the acceptable dimensions (width × length) are: S INGLE - SHEET TRANSMISSION M ULTIPLE - SHEET TRANSMISSION Document thickness: 0.
1.16 Getting started Contrast Setting the contrast allows you to compensate for any excessive lightness or dark - ness in the documents you send or copy. You have three choices: • Normal — Suited to most documents. • Light — Lightens up overly dark, “muddy” original documents.
1.17 Getting started How to insert a document 1 Adjust the document guides by sliding them to the left or right to fit the docu - ment(s) you are faxing. Your fax machine’s automatic document feeder ( ADF ) will hold up to 30 pages. 2 If you are sending a multi-page document, “fan” the pages slightly.
1.18 Getting started 3 Dial the fax number. • Enter the fax number by using the numeric keypad and then press START . … or … • Use one-touch dialing (see page 2.8). … or … • Use speed-dial dialing (see page 2.10). … or … • Use the EasyDail directory (see page 2.
1.19 Getting started If the call doesn’t go through: redialing Automatic redialing If you dialed without using either the monitor speaker or the handset and the fax call fails, your machine automatically redials the call.
1.20 Getting started Canceling a document while sending it To cancel a transmission in progress: 1 Press STOP . • If you are using a non-memory transmission, press STOP two or three times until the machine returns to standby mode. The document will finish feed- ing through the ADF .
Different ways to get the job done Reception modes Your fax machine has four different reception modes — Tel Ready, Fax Ready, Tel/Fax Ready and Ans/Fax Ready — each of which we’ll explain in a moment. We’ll also give you an idea of which one you should use, depending upon your setup.
Tel/Fax Ready mode Use it if: You use your machine not only as a fax but also as a telephone. In this mode: Your fax machine answers each incoming call after a certain num- ber of rings (see page 2.4) and if you receive a voice call, alerts you with a special ring.
1.23 Getting started Ans/Fax Ready mode Use it if: You are using an answering machine connected directly to your fax machine. In this mode: An answering machine externally connected to your fax machine answers each incoming call. If a voice call comes in, the answering machine will begin to record the incoming message.
You can make copies from your fax machine by using either the feeder or the machine’s memory. Copying from feeder Use this mode to make a single copy. Note: When you make a copy from the feeder, you cannot select the normal resolu- tion. To make a copy from feeder: 1 Insert the document face down .
Dialing a telephone number 1 Pick up the handset. You will hear a dial tone. 2 Dial the number by the using numeric keypad. … or … • Use the one-touch dialing . (See “One-touch phone dialing,” on page 2.8.) … or … • Use the speed-dial.
Call request You can send or receive a fax message and have a regular phone conversation on the same call . For further information on how to use this function, see page 2.47. Dialing during a power failure You cannot make a telephone call or send a fax during a power failure or if your fax is disconnected from its power source.
Beyond the basics We’ve covered the “musts.” Now, let’s explore the goodies..
Beyond the basics Getting everything just the way you want it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Autodialer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.
Beyond the basics The EasyStart feature guided you through the “just-gotta” settings on your machine. In the next few pages, we will cover other settings in more detail.
Setting the print parameters You can set two parameters for printing received fax messages: • Print reduction rate • Reduction margin Print reduction rate Print reduction lets you set the machine to reduce a large incoming document to a size which will fit on your paper.
Beyond the basics 2.4 Setting the copy parameters You can set two parameters for copying: • Copy reduction rate — Works the same way as the print reduction rate (see page 2.3 for more details). • Reduction margin — Serves the same purpose as the reduction margin for print- ing (see page 2.
1 Press PROGRAM , J , 0, 8 . The LCD shows: 2 Press ENTER . The LCD shows the current ECM setting: If the setting you see is acceptable, skip to step 4. If not, go on to step 3. 3 To change the setting, press or once or twice until the setting you want appears.
Beyond the basics 2.6 Setting the language While English is the language which your machine initially uses to display messages and print reports, you can set it to “speak” French or Spanish, too! To make the change from one language to the next, press PROGRAM , #.
Your fax machine’s autodialer stores your most frequently called phone and fax numbers so you don’t have to remember them. The autodialer also makes it easy to dial even the most complicated international calls! Autodialer basics How do you autodial? There are two kinds of autodialer numbers.
Using one-touch numbers As indicated previously, your fax machine will store up to 15 one-touch numbers by using the keys marked A – O . Entering or changing a one-touch number Important: To erase a number, see “Erasing a one-touch number” (next page).
Beyond the basics 2.9 10 Press ENTER to save the setting. The LCD will display the next one-touch number. If you do not want to enter any more one-touch numbers, press STOP to finish. If you do want to enter another one-touch number, go back to step 3.
5 Press ENTER . The LCD shows: Important: If you want to quit without erasing the one-touch number you have selected, press PROGRAM . The fax will return to step 3. 6 Press ENTER to erase the number. To erase another one-touch number, repeat steps 3–6.
8 The LCD now displays: then it will show either: or The machine is now prompting you for a name — a Location ID — so you will be able to find it easily in the EasyDial directory (see page 2.13). If you don’t want to enter or change this number’s Location ID , skip to step 10.
Beyond the basics 2.12 Phoning via speed-dial To dial a phone call using a speed-dial number: 1 Obtain a dial tone by doing one of the following: • Lifting the handset • Press MONITOR / CALL to use the monitor speaker 2 Press SPEED DIAL / TEL INDEX .
EasyDial directory dialing The EasyDial directory dialing feature makes your autodialer even more like an electronic phone book. EasyDial sorts and displays numbers alphabetically accord- ing to their Location ID s, so you can easily find them and dial them.
Beyond the basics 2.14 Delayed transmission Take advantage of lower evening and weekend long-distance rates with delayed transmission. Your fax machine can store up to 30 delayed commands, each of which you can program up to 31 days in advance.
Reviewing or canceling delayed commands If you have stored a delayed command in your fax machine, it will hold it in mem- ory until it either completes the command successfully or reaches its maximum number of redial attempts (see page 1.19). Your machine can store up to 30 delayed commands.
Beyond the basics 2.16 Broadcasting The basics of broadcasting The fastest way to fax one document to many recipients is broadcasting . You can use broadcasting from any function requiring the entry o.
Relay broadcast initiation Relay broadcasting is a powerful function that takes advantage of a remote “hub” to reduce your total communication costs. A “hub” fax machine is one to which you send a document, which in turn relays it to other machines which you do not actually call.
7 Use the numeric keypad to enter the day of the month and time when you want to begin initiating the relay broadcast. Here we set the transmission to occur on the 14th at 2:00 PM : 8 When the entry is complete, press ENTER . The LCD shows the fax number you entered in step 5.
Beyond the basics 2.19 Polling Polling allows someone to fax a document to you without the other person having to make (and pay for) the call. Your machine can perform: • Regular polling — Retrieves a document from the remote fax machine. • Sequential polling — Retrieves a document from several remote fax machines.
Beyond the basics 2.20 Important: Do not insert a comma after the last fax number. Note: If you enter characters by mistake, just press CANCEL to clear them before proceeding. 6 To perform the sequential polling now, skip to step 10. To perform delayed sequential polling, proceed to step 7.
Beyond the basics 2.21 F -code communication F -code: an introduction The ITU - T , part of the United Nations agency that maintains international telecom- munications standards (see the Glossary that begins on page 3.
Note: If you enter an invalid I . D . code, the fax machine will reject the attempt and abort this operation. 6 The LCD now shows briefly: then it will show either: or The machine is now prompting you for a name for this F -code box. If you want to enter or change this F -code box’s name, proceed to step 7.
Beyond the basics 2.23 11 Depending on whether you already have an ITU - T password entered for your F -code box, the LCD shows briefly: then it will show either: or The machine is asking for your F -code box’s password. This is the password for ITU - T -compatible F -code fax transactions.
Erasing an empty F -code box Important: You can only erase an empty F -code box. If the F -code box is holding any documents, you must first clear each document from the box. You can clear the F -code box by printing the documents it holds (see next page).
Printing a document received in an F -code box When your machine receives a document via ITU - T sub-addressing from another fax machine, your machine will print a message alerting the person for whom the docu- ment is intended. Then the person has a certain number of days in which to print out the message before your machine erases it.
then it will show: Note: If you know that this subaddress does not have a password, skip to step 7. 6 Use the numeric keypad to enter the appropriate password.
Beyond the basics 2.27 6 Press ENTER . The LCD shows briefly: then it will show: 7 Enter the fax number either by pressing a one-touch key, entering a speed- dial number or dialing from the numeric keypad. Do not press START . 8 What you do now depends upon when you want the transmission to begin.
Beyond the basics 2.28 Programmable one-touch keys Using the power of programmable one-touch keys The programmable one-touch keys P 1– P 5 simplify complex fax operations, letting you really tap into your machine’s power.
8 Press ENTER . The LCD shows the current day and time: 9 Instruct your fax to carry out this delayed command in one of the following ways: Option 1: Perform the command once at a certain time on a certain day of the month. (For example, “Do this at 5:05 PM on the 30th.
8 Instruct your fax to carry out this delayed command in one of the following ways: Option 1: Perform the command once at a certain time on a certain day of the month.
9 Use the numeric keypad to enter the two-digit identifier ( 01–32 ) for the first call group. You can specify up to 10 separate groups for each relay broadcast initiation. Between the entry of each new group, press COM - OPTIONS to insert a comma. Do not insert a comma after the last group number.
Note: If you make a mistake or want to erase previously entered numbers, press CANCEL to erase to the left. Or to change just one character in the number, press to move the cursor to the left, or to move it to the right, to that character. Press CANCEL to erase it.
2 Press ENTER . The LCD either shows: … or indicates a command is already programmed into this key. If P 1 is the key you want to program, skip to step 4. (However, our examples from here will say “ P 3” rather than “ P 1.” ) 3 Select the key in which you want to program a command or change a previ- ously stored command and then press it.
13 Instruct your fax to carry out this delayed command in one of the following ways: Option 1: Perform the command once at a certain time on a certain day of the month (For example, “Do this at 5:05 PM on the 30th.
9 Enter an ITU - T subaddress for the box to which you want to send the docu- ment. The ITU - T subaddress can be up to 20 characters in length and can include any combination of numbers and the * and # symbols. Do not include other non-numerical characters.
Erasing a programmable one-touch key 1 Press PROGRAM , C , 2 . The LCD shows: 2 Press ENTER . The LCD shows something like: If P 1 is the key you want to erase, skip to step 4. (However, our examples from here will say “ P 3” rather than “ P 1.” ) 3 Press the programmable one-touch key you want to erase.
Beyond the basics Your machine’s security features can help you keep private fax documents private, avoid unwanted outside communication and even protect against unauthorized use of your machine. The key to it all: the passcode Your machine has a protection passcode system which is central to the machine’s security features.
Using your fax machine during operation protection 1 When you press any key on your machine, the LCD shows: 2 Use the numeric keypad to enter the four-digit passcode (here, we enter the passcode we set previously; see page 2.37). If you enter the correct four-digit passcode, the machine now will let you go on to the next step in the fax operation.
9 Use the numeric keypad to enter the time (24-hour format) when security reception should begin every day. Type over the numerals displayed. Here, we enter 17:35 (5:35 PM ): To change a digit, press to move to the left, or to move to the right, to that digit.
3 Use the numeric keypad to enter the four-digit passcode. In our example here, we enter 6296. Note: If you enter an invalid passcode, the machine’s security feature will abort the operation. 4 Press ENTER . 5 If the setting you see is acceptable, skip to step 7.
Fax dialing from the numeric keypad while using the PIN mask Note: If the PIN mask feature is off, dial normally. If you have specified Mode 1 — use “star” power 1 Insert the document in the feeder. Adjust resolution and contrast if necessary. 2 Enter the fax number, then press the * (“star”) key and enter the PIN .
Setting for use with a closed network For maximum communications security, use a closed network. This limits your machine to faxing to and from only other Muratec fax machines with the proper passcode. Important: The passcode you use for closed network operation (and limiting polling access; see page 2.
4 Press ENTER to save the setting. What you do next depends upon what you selected in step 2 or 3: • If either Off or Mode1, the machine will return to standby mode. • If either Mode2 or Mode 3, proceed to step 5. 5 The LCD now asks if you want to enter a number: If you want to enter or modify a number, press ENTER and proceed to step 6.
Beyond the basics 2.44 Special features Your fax machine has a number of special features to make your communications eas- ier. We will cover them here.
3 Use the numeric keypad to enter a message for the cover page. The message can be up to 40 characters in length. Enter the message the same way you entered your fax name during EasyStart.
Setting the Transmit confirmation reports: TCR s Your fax machine can print a transmit confirmation report after sending a fax to any Group 3 fax machine.
Some telephone companies provide only a very general description — for example, “short-short-long” — of their DRD ring patterns. Fortunately, though, your fax has eight possible distinctive ring patterns for use with OneLine + DRD . One of them should work with your phone company’s DRD service.
3 If someone answers at the remote fax machine, your fax machine will ring several times. If so, pick up the handset. In a few seconds, the line will open and you can begin your conversation. Talking first, then sending a fax To talk first and then send a fax: 1 When your phone conversation is finished, do not hang up.
4 Scroll through the listings to find the one you want. You do this by pressing SPEED DIAL / TEL INDEX . Note: Do not press 2, 4, 6 or 8 on the numeric keypad. If you press 2, 4, 6 or 8 , the fax machine will change to the EasyDial directory. 5 When the LCD is showing the caller- ID you want to dial, press START .
Beyond the basics 2.50 PC - FAX feature: fax/computer connectivity Thanks to its PC - FAX feature, your fax machine is not only a fax machine — it also can be an image scanner, and allows you to send and receive fax messages from within your favorite PC-based software applications.
Creating the RS -232 C settings Note: If you choose the wrong RS -232 C parameters, your fax machine cannot com- municate your computer. 1 Press PROGRAM , L , 2, 2 Press ENTER . The LCD shows the fax’s RS -232 C transmission speed (baud rate) in bps (bits per second): Note: This setting is just for the RS -232 C port.
Beyond the basics Sending/receiving faxes with your computer You can receive documents from another fax onto your computer, as well as trans- mit documents from your computer to other faxes. As with scanning, the exact procedure for sending/receiving will vary depending upon how your computer’s fax software works.
Just in case … Just in case … Tips on how to care for your machine. and suggestions to follow in case of trouble. Also, a Glossary explains fax terms.
3.1 Clearing paper jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 Solving communications problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 Caring for your fax machine .
Just in case … We designed your fax machine to work reliably for years. However, you may occa- sionally experience a paper jam. Here’s what to do. If an original document jams 1 Open the control panel by plac- ing your fingers on its upper left and right corners and gently tilt- ing the cover toward you.
3.3 Just in case … 2 Remove the ink film cartridge by grabbing the handles on each side of the cartridge and lifting it straight up out of the machine. Note: The diagram (right) shows a view from the left side of the machine. 3 Gently pull the jammed printout up and out.
Occasionally during transmissions, your fax machine will encounter trouble in transmission or reception. If it does, its alarm will sound. You can identify the prob- lem with LCD messages, printed check messages and error reports.
What you see on the LCD What it means/ What to do You tried to scan the document into the memory but the machine doesn’t have enough available memory to complete the operation. If the fax received documents in the memory, print them to clear space. During transmission (or copying), you entered more pages into memory than your fax could store.
Just in case … 3.6 Errors Your machine occasionally experiences communications errors , which may be caused by anything from lightning to telephone line interference. The fax machine at the other end of the line can also cause communication errors. Trying your call may be all that’s necessary.
Just in case … 3.7 Transmission errors T .1.1 The remote fax machine did not respond to your machine. Call someone at the remote machine. T .1.4 Someone pressed STOP at the remote unit in the middle of the hand- shake (the very first part of the fax communication, when the two units “agree” on the settings they will share).
Just in case … With proper installation and a little maintenance, your fax machine should give you dependable service for years to come. Follow these suggestions to keep it in top form: • Always make sure your fax machine is installed according to our specifications, including using an electrical surge suppressor.
Corrective cleaning Here are some simple cleaning procedures for keeping your fax machine clean and operating smoothly. Before you clean your fax machine, print all document received in the memory. Cleaning your fax machine 1 Unplug the power cord of your machine from the power source.
Fixing unsatisfactory printout quality If you notice poor printout quality (whether on received faxes or on copies), here’s what to do: 1 Unplug the power cord of your machine from the power source.
Just in case … General questions Q: Where do I add ink or toner to make my fax machine’s printouts darker? A: Your fax machine dose not use ink or toner. Instead, it uses a special printing technique called Film Imaging , also known as thermal-transfer printing .
Just in case … 3.12 Q: Do I have to dial a 1 for a long-distance call? A: Yes. Dialing a fax number is just like dialing any other phone number, so be sure to include any special long-distance codes or dialing pauses when dialing. Also, remember to include them when you set your autodialer numbers.
Receiving faxes Q: My fax never answers. What’s wrong? A: Check to make sure your fax machine is properly connected to a working AC power outlet and phone jack (see page 1.8). If you are using a second phone with your machine, make sure it’s connected properly (page 1.
Just in case … 3.14 identifying yourself, “Hello, this is [your name].” When you press START , your fax machine responds to these signals using other special tones (to us humans, they sound a bit like screeches) which are its way of responding to the other machine’s “greeting.
Just in case … 3.15 A4, B4, A3 — Standard stationery sizes defined by the International Standards Organization, an agency of the United Nations. See also Paper sizes. Autodialing — Enables user to store preprogrammed telephone numbers in the unit’s memory.
Just in case … 3.16 Effective scan width — The maximum width the scanner in a fax can scan during transmission. F-Code — The ITU - T has created a fax industry standard for using sub- addressing/password-based communications with not only Muratec fax machines but also other manufacturers’ fax machines.
Normal resolution — Shown as “norm”; 203 H × 98 V lpi. The default resolution mode for all Muratec fax machines. One-touch dialing — Allows the fax user to store frequently used fax numbers for dialing with the touch of one key. See also Autodialing and Speed-dialing.
Just in case … TCR — Transmit confirmation report; this provides proof that your Muratec fax did send the document you set for transmission. Printed after transmission, the TCR also identifies the telephone number to which the fax sent the document, plus the actual time of transmission and how many pages the unit transmitted.
Just in case … 3.19.
Appendix and index.
Type: High-speed facsimile transmitter and receiver for home and office use. Phone line: Normal Public Switched Telephone Line ( PSTN ) or equivalent. Modem speed: 14,400 bps with fallback to 12,000, 9,600, 7,200, 4,800 and 2,400 bps per ITU - T , V .
United States of America Federal Communications Commission ( FCC ) information Ringer Equivalence Number ( REN s ): AC REN , 1.25B ; DC REN , 2.4. This facsimile machine has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
A Activity journal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.45 Alphanumeric directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I I . D . code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.21, 2.23 –2.25 Inserting pages (for faxing or copying) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S Security reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 .38–2.39 Sending faxes (basic instructions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T his warranty is made by Muratec America, Inc. (hereafter referred to as “Muratec”). This warranty is valid only on Muratec products purchased and used in the United States of America. This warranty applies to the product only while owned and used by the original purchaser (“Customer”).
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Muratec F-65 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Muratec F-65 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Muratec F-65, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Muratec F-65 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Muratec F-65, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Muratec F-65.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Muratec F-65. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Muratec F-65 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
