Manuel d'utilisation / d'entretien du produit HCL Series du fabricant MicroBoards Technology
Aller à la page of 39
HCL Series Users Manual Microboards Technology LLC Version 1. 1.
• Introduction 2.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 3 TABLE OF CONTENTS INTRODUC TION .................................................................................................................. 5 T HE R OBOTIC P LATFORM ....................................
• Introduction 4.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 5 Introduction The Microboards HCL Se ries autoloader is a reliable, high performance, high speed, stand alone, robotic DVD and/or CD autoloader. With its professional ind ustrial design and si mple user interface, it makes y our duplicating experience easi er than ever.
• Introduction 6 Disc Placement Another common probl em when using an autoload er is t he placement of media onto the spi ndles. Placing the media onto the spindles properly can avoid possible pi cking errors when o perating the autoloader.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 7 The Robotic Platform The Microboards HCL Se ries autoloader has five spindles (see Figure 1-2) that hold approximately 250 discs each; variations in media thickness between brands will cha nge the number of discs you ca n load at any one time.
• Menu Overvie w 8 Menu Overview This section provides an overview of the menu options. The se menu options are explained in detail on the referenced pages. Copy page 14 Use the Copy menu or Copy quick key to make CD/DVD copies. Before you start a copy, make sure you have selected the correct Master Mode.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 9 ¾ Quick Erase: This option erases the in dex (TOC) of the Rewritable disc, not the data sectio n. It is much faster than Full Eras e. However, the data section is still recove rable. If you prefer the old content not to be recovered for se cu rity purpose, please perform Full Erase.
• Menu Overvie w 10 2. System Info Use this menu option to see d ata about the aut oloader and its resources (firmware versio n, RAM and CPU). 3. Device Info Use this menu option to see data about the dr ives that are installed in the autoloa der. 4.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 11 Single Master & Multi Master Quick Buttons Introduction to Manage Accounts This feature allows the administrator to: ¾ Create user accounts and passwords to pr event unauthorized u se of the autoloader. ¾ Edit existing user account information, including nam e and pa ssword.
• Setting Counters and A ssigning Names 12 Counter: Specify Counter Specify Counter: [0 ] OK? Counter: No Counter Under Multi Master Mode, you would n eed to follow the steps below: 1. Make sure all of the spindl es are empty. 2. Place 30 blank discs for job C on to the first input spin dle.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 13 To input the desired quantity, do the following: ¾ Make sure the cursor is located at the first po sition (First blinking position): ¾ Press the Dow n button repeatedly until “0” is di splayed. ¾ Press OK button once to move the cu rsor to the next position.
• Operation 14 Microboards B.30 1. Copy (SM) Microboards B.30 8. Master Mode Microboards B.30 1. Copy (SM) Choose Partition 3->[DVD1 ]CD Counter: No Counter Preparing... Please Wait Loader Processing Drive 1 <- Input Bin Operation This chapter show s ea ch of the menu options and how they are u sed.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 15 Processing... Please Wait Loader Processing Drive 2 <- Input Bin Input Bin Empty(20) Continue? PASS 100 FAIL 0 Job Completed! Press OK to Finish The loade.
• Operation 16 Microboards B.30 1. Copy (MM) Microboards B.30 8. Master Mode Master Mode: Single Master Master Mode: Multi Master Microboards B.30 1. Copy (MM) Microboards B.30 1. Copy (MM) Preparing... Please Wait Loader Processing Drive 1 <- Input Bin 1.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 17 Processing... Please Wait Loader Processing Drive 1 <- Input Bin Input Bin Empty (20) Press OK to Continue Loading.
• Operation 18 Microboards B.30 1. Copy (MM) Microboards B.30 3. Compare Choose Partition 3-> [DVD1 ]DVD Counter: No Counter Preparing... Please Wait Loader Processing Drive 1 <- Input Bin Processing.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 19 Microboards B.30 1. Copy (MM) Microboards B.30 6. Select Burn Speed HDD to CD Speed 32x Select Burn Speed HDD to CD Speed 4. Test+Copy With the Test + Copy menu option, the autoloa der simulates the copying process, and then makes copies if everything works co rrectly.
• Operation 20 HDD to CD Speed Adjusted to: 8x Microboards B.30 8. Master Mode Microboards B.30 1. Copy (SM) Microboards B.30 9. Erase RW Counter: No Counter Loader Processing Drive 1 <- Input Bin Processing .
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 21 Quick Erasing... 0/25 Microboards B.30 1. Copy (SM) Microboards B.30 10. Hard Drive Setup Hard Drive Setup 1. Select Partition Choose Partition 1->[RESERVED] CD Choose Partition 2->[DVD1 ] DVD The “0” indicates that zero discs have been erased so far.
• Operation 22 Hard Drive Setup 2. Load Partition Load Partition[2/16] Load -> New Partition Load Partition [SAMPLE ], OK? Load Partition OK! Press OK to Finish Hard Drive Setup 4. Delete Partition Choose Partition 2->[DVD1 ] DVD Delete Partition [DVD1 ]DVD, OK? 10.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 23 Partition DVD1 Deleted Hard Drive Setup 5. Partition Info Hard Drive Setup 6. Partition Size The autoloader displays the Deleted message fo r two seconds and th en returns you to the Delete Partition menu. 10.
• Operation 24 Hard Drive Setup 7. Format Hard Drive Format Hard Drive Press OK to Continue Setup 1. Language Language: English Language: Espanol Setup 2. Read Error Skip 10.7 Format Hard Drive This function formats the Hard Drive. It deletes all disc im a ges and re-initiates the Ha rd Drive.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 25 Setup 3. CD Writing Mode CD Writing Mode Disc at Once CD Writing Mode Track at Once Setup 4. Max Audio, VCD & CDG Max Audio, VCD & CDG Speed 16x Setup 5. Buzzer Setup 6. Startup Menu Startup Menu Copy 11.
• Operation 26 Setup 7. Screen Saver Screen Saver: On Screen Saver: Off Setup 8. Counter Counter: On Counter: Off Setup 9. AUTOCOPY Enabled Microboards B.30 16. AUTOCOPY 11.7 Screen Saver This menu allows you to choose whether you want to enable the Screen Saver feature.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 27 Loader Processing... Please Wait Loader Processing Drive 1<-Input Bin Loading... RESERVED 60% 4012MB Loader Processing Drive 2<-Input Bin Processing... Please Wait Loader Processing... Drive 2<-Input Bin Input Bin Empty(20) Reset Hoppers? Setup 10.
• Operation 28 Setup 10. Disable Drives Save Changes? Drive 1 Port 1 [*]Enable [ ]Disable Drive 1 Port 1 [ ]Enable [*]Disable Setting Saved! Please Restart System Utilities 1.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 29 System Utilities 2. System Info Firmware Version B.30-08/22/05R06.06 CPU 1.6 GHz CPU RAM 128 MB SDRAM System Utilities 3. Device Info 00 Port 0 [TM100-30] SAMSUNG SP1604N 01 Port 2 [1.08] PLEXTOR DVDR PX716 2.
• Operation 30 System Utilities 4. Load Default Load Default Press OK to Continue System Utilities 5. Update Firmware Waiting for Update Please Insert Disc Firmware verified! Ready to Update Autoloader Updating... 33% Update Complete! Please restart Loader Utilities 1.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 31 Drive Alignment Alignment Finished? Loader Utilities 2. Spindle Alignment Please Select Spindle Spindle 1 Go? Loader Utilities 3.
• Operation 32 Loader Utilities 4. Z form Maneuver Loader Utilities 5.Alignment Protection Microboards B.30 14.Manage Accounts Enter PWD [ ] OK? Manage Accounts 1. View User View User 1. [ADMIN ] 13.4 Z form Maneuver Some drives have bezels that extend out from the fro nt of the drive face.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 33 Manage Accounts 2. Create User Edit User’s Name [RALPH ] OK? Enter PWD [0 ] OK? User Ralph Added! Manage Accounts 3. Edit User Info Edit User Info 1. [ADMIN ] Edit User’s Name [RALPH ] OK? Enter PWD [0 ] OK? User Ralph Changed! Manage Accounts 4.
• Operation 34 Manage Accounts 5. Password on Bootup Microboards B.30 15.Shutdown Shutdown Press OK to Shutdown Shutdown Ready to Power Off 14.5 Password on Bootup This menu allows you to enable or disable the Password on Bootup feature. During th i s process, you will be asked to select “Yes” or “No” (enable or disable).
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 35 Troubleshooting No display on LCD or the unit does not oper ate when the power is on. ¾ Check the connections for the power ca ble and e nsure that the power outlet is working correctly. ¾ Make sure that the rear-panel po wer vol tage setting matches the voltage of your power outl et.
• Troubleshooting 36 Error Codes Code Short Description Full Description 10 Arm did not return to top position The vacuum picking arm d id not return to the top position withi n 10 seconds after a command was sent out. The vacuum pick ing arm must return to the top position after each action.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 37 30 Unable to locate drive tray for output of the disc The vacuum picking arm did not detect an opened tray before reaching its lowest descending limit when attempti ng to pick up a finished disc from a specified drive tray.
• Menu Tree 38 Menu Tree 1. Copy <Partition> <Counter> 2. Test <Partition> <Counter> 3. Compare <Partition> <Counter> 4. Test+Copy <Partition> <Counter> 5. Copy+Compare <P artition > <Counter> 6.
MICROBOARDS TECHNOLOGY, LLC HCL Serie s 39 Specifications DVD Recorder Drive: DVD-+R/RW/DL CD-R/RW Rec order Power Source: 90V/240V 50- 60Hz switchable power supply Power supply: 400W Environment: Tem.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté MicroBoards Technology HCL Series c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du MicroBoards Technology HCL Series - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation MicroBoards Technology HCL Series, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le MicroBoards Technology HCL Series va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le MicroBoards Technology HCL Series, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du MicroBoards Technology HCL Series.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le MicroBoards Technology HCL Series. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei MicroBoards Technology HCL Series ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
