Manuel d'utilisation / d'entretien du produit MMG-CR2900 du fabricant Memorex
Aller à la page of 22
MODEL: MMG-CR2900 BEFORE OPERA TING THIS PRODUCT , PLEASE READ THESE INSTRUCTIONS COMPLETEL Y . CD CLOCK STEREO RADIO WITH DUAL ALARM OPERA TING INSTRUCTIONS MMG-CR2900.
1 SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit.
10. POWER SOURCES This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
5 LOCA TION OF CONTROLS 3 1 2 4 5 21 23 25 27 24 22 26 20 6 8 7 13 9 11 10 12 14 15 16 17 18 19 1. POWER OFF Button 2. PHONES (Headphones) Jack 3. RECALL Button 4. WAKE 1 Button 5. RADIO SET Button 6. RESET Button 7. TIMER Switch (Rear of Unit) 8. WAKE 2 Button 9.
6 INST ALLA TION Unravel the AC cord and connect it to a conveniently located AC outlet having 120V and 60Hz only. The Clock Display will illuminate and “12:00” will blink in the window. NOTE: If the AC plug does not fit into a nonpolarized outlet, do not file or cut the wide blade.
7 OPERA TION TO SET OR RESET THE ACTUAL TIME Slide the TIMER switch ❶ on the rear of the unit to the COUNTDOWN position. Press the TIMER button ❷ ; TIMER will blink and “1:00”, indicating 1 minute and 00 seconds, will appear in the display. 2 1 1 Press the REV ❶ or FF ❷ button to set the desired Countdown time, in minutes and seconds.
8 OPERA TION (CONTINUED) NOTES: • To check the NAP Timer time remaining, press the TIMER button; the NAP Timer timer will appear briefly. • After pressing the SET or TIMER button, another button must be pressed within five seconds, or the display will revert to the Clock mode.
9 OPERA TION (CONTINUED) Press the RADIO ON/BAND button ❶ once to turn the unit on and select radio. Repeatedly press to select the desired band (AM, FM). Slide the FM RADIO switch ❷ on the rear of the unit to the STEREO or MONO position as desired.
10 OPERA TION (CONTINUED) To recall a Radio Preset, press the RECALL button repeatedly until the desired Radio Preset appears in the display. 1 TO RECALL RADIO PRESETS To change a Radio Preset, simply tune a radio station as described on the previous page, then press the RADIO SET button ❶ ; “MEMO” will blink in the display.
11 OPERA TION (CONTINUED) Press the PLAY/PAUSE button to turn the unit on and insert a CD as described on the previous page; the total number of tracks will appear in the display. 1 Press the PLAY/PAUSE ( ) button to start playback. TO PAUSE PLAYBACK , press the PLAY/PAUSE ( ) button again; “TRACK” will blink in the display.
12 OPERA TION (CONTINUED) Press the TUNE/SKIP ❶ or ❷ button to select a track. Press the PLAY/PAUSE ( ) button ❸ to start playback and the unit will play the same track over and over until the STOP ( ) button ❹ is pressed. 4 2 1 3 2 Press the PLAY/PAUSE ( ) button ❶ to turn the unit on and insert a CD as described on page 10.
13 OPERA TION (CONTINUED) Press the PLAY/PAUSE ( ) button ❶ to turn the unit on and insert a CD as described on page 10. Press the REPEAT/Random button ❷ three times; “REP RAN” will appear in the display. 2 1 1 Press the PLAY/PAUSE ( ) button to begin playback.
14 OPERA TION (CONTINUED) Set the alarm time as previously instructed. Press the VOLUME +/- buttons to set a desired wake up volume. 1 Tune a station and then press the RADIO SET button ❶ . Press the RECALL button ❷ repeatedly until “AL” appears in the display.
15 OPERA TION (CONTINUED) Set the alarm time as previously instructed. Press the VOLUME +/- buttons to set a desired wake up volume. 1 To set the Wake Track the unit will start playing when the alarm time matches the actual time, press and hold the WAKE TRACK button ❶ , then press the TUNE/SKIP ❷ or ❸ button to select the track.
16 OPERA TION (CONTINUED) Set the alarm time as previously instructed. Press the VOLUME +/- buttons to set a desired wake up volume. 1 Press the desired WAKE button (WAKE 1 or WAKE 2) until “ ” or “ ” appears in the display. The alarm is now set to wake to buzzer and when the alarm time matches the actual time, the unit buzzer will sound.
17 OPERA TION (CONTINUED) To cancel the alarm so it does not sound when the alarm time is reached, press the RESET button ❶ , followed by the desired WAKE 1 or WAKE 2 button ❷ . 2 2 1 1 The Alarm indicator will disappear, but the alarm time will remain in memory.
18 OPERA TION (CONTINUED) Tune the desired radio station or insert a CD as previously instructed. Press and hold the SLEEP button and “:59” will appear on the clock display, then release the button. 1 Release the SLEEP button. When the sleep time has elapsed, the unit will turn off.
19 CARE AND MAINTENANCE Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fi ngers to come in contact with the shiny, unprinted side of the disc. • Do not attach adhesive tape, stickers, etc.
20 TROUBLESHOOTING GUIDE SYMPTOM CAUSE SOLUTION Unit will not AC cord not Check AC cord turn on. connected. connection. Disc will not play. CD compartment Close CD compartment not closed. door. Disc inserted Reinsert disc correctly. incorrectly. Dirty or defective CD.
Memcorp, Inc. Weston, Fl Printed in Hong Kong Visit our website at www .memcorpinc.com MMG-CR2900.OM.QXD 9/9/02 9:22 AM Page 21.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Memorex MMG-CR2900 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Memorex MMG-CR2900 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Memorex MMG-CR2900, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Memorex MMG-CR2900 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Memorex MMG-CR2900, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Memorex MMG-CR2900.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Memorex MMG-CR2900. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Memorex MMG-CR2900 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
