Manuel d'utilisation / d'entretien du produit Triton Triton 400 du fabricant Magellan
Aller à la page of 61
Magellan Navigation, Inc. 960 Overla nd Court, San Dimas, CA 91773 Magellan ® T riton ™ User Manual Magellan T riton 400 Magellan T riton 500.
i The Magellan T riton is a navigation aid designed to assi st you in arriving at your selected destination. When using the Magellan T riton, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: IN THE INTERESTS OF SAFETY , DO NOT USE THIS NA VIGA TION DEVICE WHILE DRIVING A VEHICLE.
IMPORT ANT SAFETY W ARNINGS ii Federal Communication Commissio n Interference Statement This equipment has been test ed and found to comply with the li mits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable prot ectio n against harmful inte rference in a residential installation.
IMPORT ANT SAFETY W ARNINGS iii IC statement Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interferen ce, including inte rferen ce that may cause undesired operation of the device.
Table of Contents Magellan Triton 1 Table of Contents Overview ............ ................................ ................. ................ ............................ ............. ........... 1 Features of the Magellan Triton 400 & 500 ....
Table of Contents Magellan Triton 2 Speedometer Scr een ............................................................................................ 13 Resetting the Odom eter ...........................................................................
Table of Contents Magellan Triton 3 Creating a Current Location Waypoi nt Using the Triton Menu ............................... 31 Creating a Waypoint Using the Pan Cursor ......................................................... 31 Creating a Waypoint from a Point on the Map Using the Triton Menu .
Table of Contents Magellan Triton 4 Hiding/Showing a Trail ..................................................................................... 48 Activating a Backtrack Route ..........................................................................
Overview 1 Overview Thank you for your p urchase of the Magellan T riton GPS receiver . The Magellan T riton was designed for the outdoor enthusiast with all the features needed to make yo ur outd oor adventures safe and enjoyable. Be sure to register your Magellan T riton at www .
Overview 2 Magellan T riton C D F H G E A B I A Backlight Button B Power Button C Zoom - (Zoom out) Button D Zoom + (Zoo m in) Button E ENTER Button / Cursor Control F PAGE / GO TO Button G Esc (Escap.
Overview 3 Specifications PHYSICAL PERFORMANCE POWER Case Rubber armored impact-r esistant plastic, wate r-resistant seal, IPX-7 Base Map Built-in base map of th e continent al United States and Canada. Size 4.65" x 2. 16" x 1.22" (11.8 x 5.
Fundamentals 4 Fundamentals T urning the T riton on 1. Press and hold the power button until the T riton splash screen is displayed. T urning the T riton off When turning off the T riton you can select to have it shutdown or go into suspend mode. 1. Press the Power button and the T riton will begin the shutdown sequence.
Fundamentals 5 7. From the drop-down menu, select your curre nt time zone. (T ime zones are not changed automatically when travelling. If you travel to an area with a different time zone, you will need to change it here for accurate time information.) 8.
Fundamentals 6 Automatic Power Off The T riton can be set to automatica lly go into suspend mode when no keys have been pressed. This saves battery life if you forg et to turn off the T riton. Setting the Power Off T imer interval. 1. From the Map screen, press MENU .
Fundamentals 7 The Tr a i l option provides a way for you to save your current track (a record of your travels s ince the last time track was cleared) as a route th at you can use again to follow your current journey .
Fundamentals 8 Data Fields The Large Data screen, the Compass , and the Satelli te Status screen have data field that can be customized to display naviga tion information. Y ou can change what information is be ing displayed from 20 different da ta type options.
Fundamentals 9 Select a low backlight level during nighttime use. 1. Press the Backlight button (top left side of the receiver) to cycle through the backlight intensities. (Alternate method) 1. Press MENU . 2. Select View . 3. Select Profiles . 4. Select a profile.
Fundamentals 10 Connect to PC using USB cable (if possible). 1. Connect the Magellan T riton to a computer using the USB cable supplied with the Magellan Tr i t o n . 2. Select POWER ONL Y from the options menu that is displayed. Connect to V ehicle Power Adapter (optional accessory).
Navigation Screens 11 Navigation Scr eens The Magellan T riton has six navigation screens and a Satellite Status screen. The Navigation scree ns provide you with information to assist you in your journeys.
Navigation Screens 12 The pan cursor (target icon) can be moved to any posi tion on the map by using the cursor control. A small red dot around the cursor indi cates the direction to your present position. The pan cursor is used for adding waypoin ts to the map or creating a go to route from your present position to a spot on the map.
Navigation Screens 13 Current Location Screen The Current Loca tion screen contains information about your present position as well as the distanc e a nd bearing to your next waypoint destination if there is an active route being used.
Navigation Screens 14 Resetting Maximum Speed 1. While viewing the Speedometer screen, pres s MENU . 2. Select Reset Speed . 3. The Speedometer screen is displayed with the maximu m and average speeds reset to zero.
Navigation Screens 15 5. An arrow is displayed outside the compass ring. Rotate the T riton, keeping the arrow pointed towards you. The center of the compass will beg in to add red segments indica ting the calibration progress. When the inner portion of the compass is red, the rotation portion of the calibration is complete.
Navigation Screens 16 The Satellite Status Screen The Satellite Status Screen graphically displays the satellites and their signal strength that is being used to compute your location. This s creen shows when you are getting strong, weak, or poor signal recep tion.
Navigation Screens 17 Explanation of Data Field T ypes Latitude (LA T) Latitude is the coordinate measurement of North and South. The la titude lines run parallel to the equator . They range from 0° (th e Equator) to 90° N/S (the Poles) Longitude (LON) Longitude is the coordinate measurement of East a nd West.
Navigation Screens 18 Cross T rack Error (XTE) Cross T rack Error measures how far the user is off the trail or route. If no Go T o or Route is set, this will appear blank or dashes. Elevation Elevation measures the height abo ve or below Sea Level which is 0.
Using the Keyboard 19 Using the Keyboar d Entering alphanumeric c haracters into the Magellan T riton is done by the use of the keyboa rd. Key Types Color Sample Description Alphanumeric Light Blue Enters the alpha, numeric or symbol character selected.
Using the Keyboard 20 Extended Character Select Medium Blue Changes the available characters to extended characters. Numeric Select Blue Changes the available characters to numeric characters. Alpha Select Blue Change s the available characters to alphabetic characters.
Using the Keyboard 21 Shift Key Medium Blue With alphabetic characters shown, shifts between upper and lower case characters. With extended characters shown, shifts between two character sets. Not functional when numeric or symbol characters are displayed.
Using the Keyboard 22 Date Entry The Magellan T riton uses a standard calendar di splay to enter dates fo r local information and waypoint data. Use the left and right arrows to ch ange months. W ith the desired month displayed, select the date to be entered.
Settings 23 Settings The Magellan T riton gives you the means to customize the re ceiver and view details about the Magellan T riton receiver . Customizing Navigation Settings 1. From the Map screen press MENU . 2. Select View . 3. Select Settings . 4.
Settings 24 View Memory Usage 1. From the Map screen press MENU . 2. Select View . 3. Select Settings . 4. Select Memory . 5. Select View Usage. 6. Press ESC when done. Clearing Memory Use caution when clearing memory . This will delete waypoints and routes stored in the rece iver and cannot be undone.
Settings 25 4. Select Connectivity . 5. Select Connect to PC , NMEA - USB , NMEA - Serial, or Power Only . 6. Press ESC to save changes and return to the Settings Menu . Getting Software V ersion Information 1. From the Map screen press MENU . 2. Select View .
Settings 26 3. Select Settings . 4. Select Diagnostics . 5. Select Audio T est, Video T est , Keypad T est or To u c h Te s t . 6. Follow the displayed instructions for each test.
Profiles 27 Pr ofiles The Magellan T riton gives you the means to set up three profiles; Hiking, Marine and Ge ocaching. Each profile contai ns custom settings that you can select. Y ou can customize the profiles to fit your particular needs. Y o u will notice that the backgr ound colors for the screens change depending upon the profile selected.
Profiles 28 Map Page Navigation Page (Magellan T riton 500) Alerts Page MAP DET AIL Low , Medium, High Sets the amount of detailed information that is displayed on the map to avoid clutter . WA YPOINT NAMES On, Off Sets whether or not waypoint names will be displayed on t he Map screen.
Profiles 29 ARRIVAL On, Off T urns the arrival alert on or off. WA YPOINT PROXIMITY V arious Sets distance that the Magellan T riton will alert you to as you approa ch a waypoint. GEOCACHE PROXIMITY V arious Sets distance that the Magellan T riton will alert you to as you a geocache waypoint.
Waypoints 30 Way p oi n ts W aypoints are the key to navigating and crea ting routes. An understanding of wa ypoints and their use is important to get the most out of your Magellan T riton.
Waypoints 31 Creating Waypoints Creating a Current Location W aypoint from the Map Screen 1. While viewing the Map screen, press ENTER . 2. Select Create W aypoint . 3. The Wa y p o i n t D e t a i l s screen is displayed with the latit ude, longitude and elevation for your current location.
Waypoints 32 Creating a W aypoint from a Point on the Map Using the T riton Menu 1. While viewing the Map screen, press MENU . 2. Select Create . 3. Select Wa y p o i n t . 4. Select Point on Map . 5. The Map screen is displayed. Use the arrow ke ypad to move the pan cursor to the point on the map desired.
Waypoints 33 3. Select Wa y p o i n t . 4. Select Coordinates . 5. The Wa y p o i n t D e t a i l s screen is displayed with the lati tude and longitude for your current location or the pan cursor position. 6. Select the latitude field ( LA T ). 7. Use the keyboard to enter the lati tude for the waypoint.
Waypoints 34 Editing Waypoints Editing a Saved W aypoint 1. From the Map screen, press MENU . 2. Select Go T o . 3. Select Wa y p o i n t . 4. Change the order that the waypoints are displa yed, if needed, or search for a waypoint. (Select the Search field under the Select W aypoint header .
Waypoints 35 4. Change the order that the waypoints are disp layed, if needed, or sea rch for a waypoint. (Select the Search field under the Select W aypoint header . Select the order you want the waypoints listed, either by neare st, date added, or by name.
Geocaching 36 Geocache Waypoints Geocaching is a popular activity with GPS users. People will hide caches (“ treasures”) and record the latitude and longitude for the cache . They post these locations on ge ocaching web sites that can be found on the internet.
Geocaching 37 4. Change the order that the geocache wayp oint s are displayed, if nee ded, or search for a geocache waypoin t. (Select the Search field u nder the Select W aypoint header . Select the order you want the waypoints listed, either by n earest, date added, or by name.
Geocaching 38 6. When the waypoint name is highligh ted press ENTER . Select the View icon to the left of the waypoint name and press ENTER . 7. Use the P AGE / GO TO button to display the Options page. 8. Select Delete W aypoint . 9. Confirm the deletion by selecting the green checkmark .
Routes 39 Routes There are two types of route s that are commonly used in the Magellan T riton, Go T o route and Multileg route. A third type of route, Backtrack rout e, is also commonly used and is described in the chapter on T rails. A Go T o route is the simplest route possible.
Routes 40 waypoints listed, either by neare st, date added, or by name. T o do a search, select Search and using the keyboard, enter the fi rst few characters of the waypoint.) 5. Select the waypoint you want to go to from the list of waypoints. 6. When the waypoint n ame is highlighted press ENTER .
Routes 41 Creating a Go T o Route to a Geocache W aypoint 1. From the Map screen press MENU . (Alternate Method: Press and hold the GO TO button while the present position cursor is displayed on the Map screen.) 2. Select Go T o . 3. Select Geocache .
Routes 42 5. The Route Create screen is displayed with the waypoi nt you selected as the starting waypoint as the only item in the list. 6. Select Add Point . 7. Select the method for determining the next de stination in the route. The same options as explained in step 4 apply .
Routes 43 Deleting a Multileg Route 1. From the Map screen press MENU . 2. Select Go T o . 3. Select Route . 4. If needed, cha nge the order that the waypoints a re displayed or search for a waypoint. (Select the Search field under the Go T o route header .
Routes 44 1. From the Map screen press MENU . 2. Select Go T o . 3. Select Route . 4. Change the order that the saved routes are displayed if needed or do a search on a route. (Select the Search field under the Go to rout e header . Select the order you want the waypoints listed, by date added or name.
Trails 45 Tr a i l s As you travel with the Magellan T riton on and computing your position, the Magellan T riton automatically drops electronic breadcrumbs to record your travels. These breadcrumbs are temporary waypoints that are created and sto red while you travel.
Trails 46 order you want the trail listed, by name or date added. Select search to enter the first few characters for a trail you are looking for .) 5. Select the trail you want to go to from the list of trails and press ENTER . 6. When the trail name is highlighted, select the View icon to the left of the trail name.
Trails 47 8. Select Delete T rail . 9. Select the green checkmark to confirm deletion. Duplicating a T rail 1. From the Map screen press MENU . 2. Select Go T o . 3. Select Tr a i l . 4. Change the order that the trails are dis played, if needed, or search for a tr ail.
Trails 48 Hiding/Showing a T rail 1. From the Map screen press MENU . 2. Select Go T o . 3. Select Tr a i l . 4. Change the order that the trails are dis played, if needed, or search for a tr ail. (Select the Search field under the Select T rail header .
Places Waypoints 49 Places Places are waypoint s that are part of the base map that is installed in your Magellan T riton. These waypoints can’t be deleted or duplicated but they can be used as the destination for a Go T o route or a multileg route.
Places Waypoints 50 5. Select the category or All Categories . 6. Select the subcategory or All Subcategories if available. 7. Select Nearest to view the wa ypoints in the category so rted by the distance from your current locati on (or cursor position if in pan mode) or do a searc h on a waypoint.
Places Waypoints 51 Viewing Best Fish and Hunt T imes for a Place W aypoint 1. From the Map screen, press MENU . 2. Select Go T o . 3. Select Place . 4. From the Select Map display , select the background map or the detailed map for the waypoint. (If you do not have any detailed ma ps loaded, Background Maps will be the only option.
Places Waypoints 52 search brings up the keyboard s o you can ente r the first few characters for a waypoint you want to search for .) 8. Select the waypoint name from the list of wa ypoints and press ENTER . Select the View icon to the left. The Wa y p o i n t D e t a i l screen is displayed.
Media 53 Media Before using any of the media options you need install an optional SD card in the SD ca rd slot located on the right side of the Magellan T riton. Browsing Photographs 1. Press MENU . 2. Select View . 3. Select Media . 4. Select the Sort button at the top to choose ho w the images will be sorted – by date, distance or name.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Magellan Triton Triton 400 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Magellan Triton Triton 400 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Magellan Triton Triton 400, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Magellan Triton Triton 400 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Magellan Triton Triton 400, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Magellan Triton Triton 400.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Magellan Triton Triton 400. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Magellan Triton Triton 400 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
