Manuel d'utilisation / d'entretien du produit HC3 du fabricant Light & Motion
Aller à la page of 24
Bluefin HC3 Owner’ s Manual www .uwimaging.com For the Son y HDR-HC3 camcorder.
W elcome Congratulations on your pur chase of the Bluefin underwater video housing. Please inspect the packaging of your pr oduct to verify that there was no damage during shipping. If you ar e not familiar with your camcorder’ s features, please tak e time to become familiar with the camcorder befor e you pr oceed in this manual.
3 T able of Contents Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Camera Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Getting Star ted Illustrated below ar e the locations of Bluefin’ s features and functions. T ake time to familiarize yourself with the housing. Monitor Base Light Arm Base Lens Lock ON/MODE Butto.
5 Camera Pr eparation 1. Install a fully charged Son y NP-FP90 batter y . 2. Install a HD D VC tape into your camcor der . 3. If still images are desir ed, install a Memor y Stick Duo.
6 P-Menu Setup The P-Menu is a customizable menu that allo ws quick access to commonly used camera featur es.This is ver y useful underwater since controls such as White Balance can only be accessed thr ough the camera’ s menu system.
7 (Fig. 5) (Fig. 6) (Fig. 7) (Fig. 8).
8 Mounting the Camera 1. Remov e the rear plate b y pushing the Latch Lock in and rotating the latch do wn and forward of the housing body . (Refer fig. 9) 2. Remov e the Camera T ray . A. Push forward on the Camera T ray . B. Press the Camera T ra y Release Latch down.
9 and that the O-rings seat ev enly . Operation Left Smar t Grip Controls (Refer fig. 12) Far - Moves focus point further from camcor der . Near - Mov es focus point closer to camcorder . Photo - Records still video captur e to Memor y Stick (in either mode).
10 Rear Plate (Refer fig. 15) On/Mode - T urns the camcorder on and cycles thr ough modes. Housing Left Side (Refer fig. 16 and 17) Manual - Activates the camera’ s manual button. Briefly pushing this button activates manual contr ol of the active function.
11 Smooth Slo w Recording Set up the P-Menu as described in this manual under P-Men u Setup . Befor e loading the camera into the housing set the mode for the Smooth Slow Recording function to either captur e images seen by the camera before or after the Record button is pushed.
12 Lens Installation / Remo val T o Install Lens 1. Perf orm o-ring inspection. 2. Align lens to housing details. 3. Press lens into housing. 4. Rotate clockwise until Locking pin engages. T o Remove Lens 1. Slide Locking pin outward a wa y from lens.
13 Bluefin Monitors - Getting Star ted Illustrated below ar e the components of the Compact Monitor and the Remote Monitor . T ake time to identify and become familiar with each part.
14 Bluefin Monitor - Bulkhead Installation 1) Remov e the Rear Plate. 2) Using a flat head scre wdriver or coin, remove the P or t Plug. (Refer Fig. 16) 3) On the inside of the Rear Plate, remov e the four screws using a 3/32 allen k ey and remo ve cir cuit board.
15 Compact Monitor Operation Po wer On/Off The monitor will pow er on and off with the camcorder . Remote Monitor Operation 1) If necessar y , activate pow er to the monitor by switching the pow er switch on the inside of the Rear Plate to the ON position.
16 Charging the Remote and Compact Monitor 1) Remov e the Charging Port Plug using a coin or large flat head scre wdriver . (Refer fig. 20) 2) Plug charger into a 110v outlet. This charger is only rated at this v oltage. If you do not ha ve access to a 110v outlet, you must use a conv er ter .
17 Bluefin Light Systems - Getting Star ted Pictured belo w are the components of the Sunra y-S Mini Pro and Sunra y-S Mini Elite lighting system. T ak e a moment to familiarize yourself with each part for later identification and use.
18 Charging Ba tteries It is recommended that y ou charge your batteries when they ar e receiv ed. It is also r ecommended to charge batteries just prior to use. 1) The charger can accept an electrical range of 100 - 240v and 50 - 60hz. 2) The charger has two LED lights: Left LED: Orange when charging Li-ion batteries.
19 Mounting Battery P ods 1) Remov e the rear plate of the housing. 2) Slide the batter y pods into housing channels. 3) Insert Pod Lock er between the pods and tighten using 1/8” allen ke y . Do not ov er -tighten. Connecting Lights to Battery P ods 1) Plug in the cable connectors on the pod.
20 (Fig. 25) (Fig. 26) (Fig. 27) (Fig. 28) 1) Using an allen k ey , remov e the two scre ws on the back of the handle . (Refer fig. 25) 2) Remov e the Handle Cap fr om the handle assembly . (Refer fig. 26) 3) Remov e old batteries from handle boar d. 4) Install new 1/3 N batteries into the handle boar d.
21 First Time Use All Light & Motion equipment is pressur e tested prior to shipping. Howe ver , ther e could be unseen damage due to shipping. A test dive without the camcorder in the housing is highly r ecommended. After the initial dive with just the housing, mak e the following checks: 1.
Rear Plate O-rings Smart Grip O-ring Optic O-rings 4) T o check O-rings for damage, place the O-ring betw een the index finger and thumb. Then pull the O-ring through y our fingers, feeling for an y debris or wear . 5) If O-rings are dirty , it is best to replace them.
Bluefin Accessories Bluefin T wo-Y ear Fault Free W arranty . . . . . . . . . . . . . .905-0201 Bluefin Super Macro Lens . . . . . . . . . . . . . . . . . . . . . . .802-0095 Bluefin T ripod Mount . . . . . . . . . . . . . . . . . . . . . . . . . . .802-0152 Bluefin Pole Cam Mounting Kit .
Light & Motion 300 Canner y Row • Monter ey , C A 93940 (831) 645-1525 • Fax (831) 375-2517 www .uwimaging.com 905-0266-A.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Light & Motion HC3 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Light & Motion HC3 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Light & Motion HC3, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Light & Motion HC3 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Light & Motion HC3, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Light & Motion HC3.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Light & Motion HC3. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Light & Motion HC3 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
