Manuel d'utilisation / d'entretien du produit 701 du fabricant Lexmark
Aller à la page of 197
Pro710 Series User's Guide November 2011 www.lexmark.com Machine type(s): 4449 Model(s): 701, 70E.
Contents Safety information .......................................................................................6 About your printer .......................................................................................7 Thank you for choosing this printer! .
Loading paper and original documents ....................................................... 31 Loading the paper tray ............................................................................................................................ 31 Loading envelopes or photo paper .
Scanning to a network computer ............................................................................................................ 64 Scanning to a flash drive or memory card ...................................................................
Setup troubleshooting........................................................................................................................... 130 Understanding printer messages .......................................................................
Safety information Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations. CAUTION—POTENTIAL INJURY: The lithium battery in this product is not intended to be replaced.
About your printer Thank you for choosing this printer! We've worked hard to make sure it will meet your needs. To start using your new printer right away, use the setup materials that came with the printer, and then skim the User’s Guide to learn how to perform basic tasks.
Conserving ink • Use Quick Print or Draft Mode. These modes can be used to print documents using less ink than normal and are ideal for printing documents that are mostly text. • Use font types and font settings that require less ink. Most programs or applications let you adjust the darkness of the colors.
What are you looking for? Find it here Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Performing printing, copying, .
What are you looking for? Find it here Telephone support In the US, call us at: 1 ‑ 800 ‑ 395 ‑ 4039 Monday–Friday (8:00 AM–11:00 PM ET), Saturday and Sunday (11:00 AM–8:00 PM ET) Support telephone numbers and hours of operation for your region or country can be found on the Support Web site ( http://support.
Use the To 6 ADF output tray Hold documents as they exit from the ADF. 7 PictBridge and USB port Connect a PictBridge ‑ enabled digital camera or a flash drive to the printer. 8 Printer control panel Operate the printer. 9 Paper tray Load paper. 10 Paper stop Catch the paper as it exits.
Use the To 20 Printhead access area Install the printhead. Note: The carrier moves to the printhead access area when no printhead is installed in the printer.
Ordering and replacing supplies Ordering ink cartridges Lexmark Pro710 Series models Item Return Program Cartridge 1 Regular cartridge 2 Black cartridge 150 Not available High ‑ yield black cartridg.
Using genuine Lexmark ink cartridges Lexmark printers, ink cartridges, and photo paper are designed to perform together for superior print quality, and our inks are formulated to work with your printer and help extend the life of your product. We recommend that you use only genuine Lexmark ink cartridges.
Installing ink cartridges 1 Remove the ink cartridge from the pack, and then remove the protective cap from the ink cartridge. If your ink cartridge comes with a twist cap, then remove the cap. 2 Insert each ink cartridge. Slide your finger along the ink cartridge until the cartridge clicks into place.
Paper Paper size Lexmark Photo Paper • Letter • A4 • 4 x 6 in. • L Lexmark PerfectFinish Photo Paper • Letter • A4 • 4 x 6 in. • L Notes: • Availability may vary by country or region. • For best results when printing photos or other high-quality images, use Lexmark Photo Paper or Lexmark PerfectFinish TM Photo Paper.
Using the printer control panel buttons and menus Replacing the language sheet A language sheet is used to label buttons on the printer control panel. Language sheets can be replaced anytime depending on which language you want to use. Some languages may not be available depending on your printer model.
Using the printer control panel Use To 1 Power • Turn the printer on and off. • Switch to Sleep mode. Note: When the printer is on, press to switch to Sleep mode. Press and hold for three seconds to turn off the printer. 2 Display Note: The display is turned off in Sleep mode.
8 Redial Display the last number dialed. Press the left or right arrow button to view the last five numbers dialed. 9 Pause Insert a three-second pause in a fax number to wait for an outside line or get through an automated answering system. Enter a pause only when you have already begun entering the number.
18 Eco ‑ Mode • Change to Sleep mode after the printer is left idle for 10 minutes. • Set screen brightness to low. Changing the Sleep timeout The Sleep timeout is the time it takes for the printer to switch to Sleep mode when the printer is left idle.
3 Press the left or right arrow button to scroll to Yes , and then press . The printer restarts automatically after resetting to factory default settings. 4 When prompted to set the initial settings of your printer, make your selections using the printer control panel buttons.
Using shortcuts What are shortcuts? A shortcut is a way to quickly accomplish printing, copying, scanning, e ‑ mailing, or faxing tasks with the printer. You can configure and save a set of frequently used printer settings available for a given task and then assign a shortcut number and shortcut name to it.
Getting started During installation, a link will be provided for you to create shortcuts. If you were not able to create your shortcuts during installation, then you may create the shortcuts through your printer software.
Using shortcuts on the printer Make sure you have created a shortcut. From the printer control panel, navigate to: > Shortcuts > > select a shortcut > or > > enter the shortcut number > Note: If you configured the shortcut to show the settings before running, then the settings will appear on the printer display.
Using the printer software Minimum system requirements The printer software requires up to 500MB of free disk space. Supported operating systems • Microsoft Windows 7 (SP1) • Microsoft Windows Ser.
If you did not install these additional programs during initial installation, then reinsert the installation software CD, run the installation software, and then click Advanced Options > Install Additional Software . Printer software Use the To Lexmark TM Printer Home (referred to as Printer Home) • Launch applications or programs.
Use the To Printing Preferences When you click File > Print > Properties with a document open, a Printing Preferences dialog appears. The dialog lets you select options for the print job, such as the following: • Select the number of copies to print.
• To take advantage of the full features of your printer, select the custom install option during installation, and then select all packages listed. Accessing Web links Web links are links to predefined Web pages that are saved in the printer folder.
Updating the printer software For Windows users 1 Click or Start . 2 Click All Programs or Programs , and then select the printer program folder from the list. 3 Select your printer, and then click Product Update . 4 Follow the instructions on the computer screen.
3 Double ‑ click Uninstaller . 4 Follow the instructions on the computer screen. Installing the printer software Note: If you installed the printer software on this computer before but need to reinstall the software, then uninstall the current software first.
Loading paper and original documents Loading the paper tray Make sure: • You use paper designed for inkjet printers. • The paper is not used or damaged. • If you are using specialty paper, you follow the instructions that came with it. • The paper does not buckle when you adjust the paper guides to avoid jams.
3 If you are loading A4 ‑ or legal ‑ size paper, then squeeze the tab and pull to extend the tray. Note: When you pull the extension out, the first stop accommodates A4 ‑ size paper. When the extension is fully out, it accommodates legal ‑ size paper.
6 Insert the tray. Note: If you extended the tray to accommodate A4- or legal-size paper, then the tray sticks out from the front of the printer when inserted. 7 Flip up the paper stop to catch the paper as it exits. Note: If you loaded A4 ‑ or legal ‑ size paper, then extend the paper stop.
Loading envelopes or photo paper 1 Pull tray completely out of the printer. 2 Move the paper guides to the sides of tray. Loading paper and original documents 34.
3 Use the envelope icon and the photo paper outline on the bottom of the tray to help you position envelopes or photo paper. Note: Do not mix paper types in the tray. You can load either envelopes or photo paper, but not both. 4 Load envelopes or photo paper.
5 Adjust the paper guides to rest gently against the left, right, and bottom edges of the envelopes or photo paper. 6 Insert the tray. 7 Flip up the paper stop to catch the envelopes or photos as they exit. Note: For best results, allow photos to dry at least 24 hours before stacking, displaying, or storing.
Load up to Make sure 100 sheets of coated paper 25 sheets of photo paper 25 sheets of glossy paper • The glossy or printable side of the paper faces down. (If you are not sure which side is the printable side, then see the instructions that came with the paper.
Load up to Make sure 25 sheets of labels • You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing, resulting in a paper jam. • You load letter ‑ or A4 ‑ size label sheets. • The print side of the labels faces down.
Saving paper settings You can adjust the settings for your print and copy jobs to match the paper size and type you have loaded in the printer. 1 From the printer control panel, press .
Loading original documents into the ADF You can load up to 35 sheets of an original document into the ADF for scanning, copying, and faxing. You can load A4 ‑ , letter ‑ , or legal ‑ size paper into the ADF. 1 Adjust the paper guide on the ADF tray to the width of the original document.
Printing Tips for printing • Use the appropriate paper for your print job. • Select a higher print quality for better prints. • Make sure there is enough ink in the ink cartridges. • Remove each sheet as it is printed when printing photos or when working with specialty media.
Collating printed copies When printing multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated). Collated Not collated Notes: • The collate option is available only when you are printing multiple copies.
4 To change the current page order, select the Reverse page order check box. 5 Click OK to close any printer software dialogs. 6 Click OK or Print . For Macintosh users 1 With a document open, choose File > Page Setup . 2 From the Page Setup dialog, set the printer, paper size, and orientation.
8 Adjust other settings as needed. 9 Click Print . Printing documents from a flash drive Make sure the flash drive contains document files that are supported by the printer. For more information, see “Supported file types” on page 47. 1 Insert a flash drive.
For Macintosh users 1 With a document open, choose File > Page Setup . 2 From the “Format for” pop ‑ up menu, choose your printer. 3 From the Paper Size pop ‑ up menu, choose your envelope size. If no size matches the envelope size, then set a custom size.
3 From the Paper Size pop ‑ up menu, choose your paper size. If no paper size matches the label sheet size, then set a custom size. 4 Select an orientation, and then click OK . 5 From the menu bar, choose File > Print . 6 From the Printer pop ‑ up menu, choose your printer.
Working with photos Supported file types Documents: • .pdf (Adobe Portable Document Format) Images: • .jpg, .jpeg, .jpe (Joint Photographic Experts Group) • .tiff, .tif (Tagged Image File Format) Using a flash drive with the printer Make sure the flash drive contains files that are supported by the printer.
Printing photos from a flash drive 1 Load photo paper. 2 Insert a flash drive or digital camera set to mass storage mode. If image files and document files are stored in the memory device, then press the left or right arrow button to select Photos , and then press .
Warning—Potential Damage: Do not touch any open connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device.
5 Click OK to close any printer software dialogs. 6 Click OK or Print . To return to single-sided printing, repeat steps 1 and 2, and then navigate to: Layout tab > Print on Both Sides (Duplex) area > Print on one side only For Macintosh users 1 With a document open, choose File > Page Setup .
Setting the duplex printing dry time Using the control panel 1 From the printer control panel, navigate to: > Setup > > Print Mode Setup > > Page Dry Time > 2 Press the up or down arrow button to scroll to the dry time setting you want, and then press .
Managing print jobs Finding the print queue for your printer A print queue represents the printer that is connected to your computer. The print queue name is usually the printer model or the printer nickname assigned when installing or adding the printer.
Setting your printer as the default printer Your printer should be selected automatically from the Print dialog when you send a print job. If you have to manually select your printer, then it is not the default printer. To set the default printer: For Windows users 1 Click , or click Start and then click Run .
Pausing print jobs For Windows users 1 Click , or click Start and then click Run . 2 In the Start Search or Run box, type control printers . 3 Press Enter , or click OK . The printers folder opens. 4 Right ‑ click the printer, and then select Open or See what's printing .
3 Resume the print job: • If you want to resume a particular print job, then choose the document name, and then click Resume . • If you want to resume all print jobs in the queue, then click Resume Printer or Start Jobs . Canceling print jobs To cancel a print job from the printer control panel, press , and then press .
Supported printers LexPrint enables your mobile device to communicate with Lexmark printers found on the same network. • For select printer models that support Direct Image and Zeroconf or Bonjour, you can print directly from your mobile device to the printer without using LexPrint Listener.
Copying ADF Scanner glass Use the ADF for multiple ‑ page documents. Note: The ADF is available only in select printer models. If you purchased a printer without an ADF, then load original documents or photos on the scanner glass.
5 From the Copy menu screen, press the up or down arrow button to scroll to the option you want to set, and then press the left or right arrow button to scroll to the setting you want. If necessary, press to make a selection. 6 Select the copy mode: • Press to switch to color mode.
Adjusting copy quality 1 Load paper. 2 Load the original document faceup into the ADF or facedown on the scanner glass. 3 From the printer control panel, navigate to: > Copy > > Quality 4 Press the left or right arrow button to set the copy quality.
Placing separator sheets between copies A separator sheet is a sheet of paper placed between pages, copies, or jobs based on the setting selected. This feature is useful when printing transparencies. 1 Load paper. 2 Load the original document faceup into the ADF or facedown on the scanner glass.
Removing the background of a copy The Background Removal feature adjusts the amount of background visible on a copy. 1 Load paper. 2 Load the original document faceup into the ADF or facedown on the scanner glass.
3 From the printer control panel, navigate to: > Copy > > Copies 4 Press the left or right arrow button to select the number of copies. 5 From the Copy menu screen, press the up or down arrow button to scroll to the option you want to set, and then press the left or right arrow button to scroll to the setting you want.
Scanning ADF Scanner glass Use the ADF for multiple ‑ page documents. Note: The ADF is available only in select printer models. If you purchased a printer without an ADF, then load original documents or photos on the scanner glass.
3 Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right arrow button to scroll to the setting you want. Set the color, quality, original image size, and other scan options. If necessary, press each time you make a selection.
4 Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right arrow button to scroll to the setting you want. Set the color, quality, original image size, and other scan options. If necessary, press each time you make a selection.
Scanning documents for editing An Optical Character Recognition (OCR) application allows you to edit an original text document that has been scanned. In order for this to work, you must have an OCR application stored on a local or network computer and you must be able to select it from the list of applications when you set up the scan.
Scanning directly to e ‑ mail using the printer software Make sure you have set up your e ‑ mail settings before proceeding. For more information, see the section on e ‑ mailing in the User’s Guide . For Windows users 1 Load an original document faceup into the ADF or facedown on the scanner glass.
3 Click All Programs or Programs , and then select the printer program folder from the list. 4 Navigate to: Printer Home > select your printer > Scan > PDF Scanning starts and the scan progress dialog appears. 5 Save the document as a PDF. For Macintosh users 1 Load an original document faceup into the ADF or facedown on the scanner glass.
Canceling scan jobs Do one or more of the following: • From the printer control panel, press , and then press . Scanning stops and the printer returns to the previous menu. • If you are sending the scan job using the printer software, then cancel the scan job from the software dialog.
E-mailing Setting up the printer to e-mail Setting up the e-mail function For Windows users 1 Click or Start . 2 Click All Programs or Programs , and then select the printer program folder from the list. 3 Navigate to: Printer Home > select your printer > Settings > Set up the printer to e ‑ mail The E ‑ mail Setup Wizard opens.
3 Navigate to: Printer Home > select your printer > Fax > Edit contact list > Select from Phone Book 4 From the Phone Book field, choose a phone book. You can choose any mail client phone book where you store e ‑ mail addresses. 5 Select the contact that you want to add, and then click Add to or change list to import the contact.
ADF Scanner glass Note: The ADF is available only in select printer models. If you purchased a printer without an ADF, then load original documents or photos on the scanner glass. Tips for e ‑ mailing • Make sure to enter your e ‑ mail account information and set up the SMTP server before sending an e ‑ mail.
Faxing CAUTION—POTENTIAL INJURY: To reduce risk of fire, use only the telecommunications (RJ-11) cord provided with this product or a UL Listed 26 AWG or larger replacement when connecting this product to the public switched telephone network. CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm.
Setup 2: Printer is sharing the line with an answering machine Connected to the same telephone wall jack To connect: 1 Connect the cable from the wall jack to the port of the printer. 2 Remove the protective plug from the port of the printer, and then connect the answering machine to the port.
Tips for this setup: • If you have only one telephone number on your line, then you need to set the printer to receive faxes automatically (Auto Answer On).
Tips for this setup: • This setup works best if you subscribe to a distinctive ring service. If you have distinctive ring service, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically.
3 To continue using a computer for Internet access, connect the computer to the DSL HPN port on the DSL filter. 4 To connect a telephone to the printer, remove the protective plug from the port of the printer and then connect the telephone to the port.
Scenario 4: Digital telephone service through a cable provider Setup 1: Printer is connected directly to a cable modem Follow this setup if you normally connect your telephone to a cable modem. To connect: 1 Connect one end of a telephone cable to the port of the printer.
Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the house Follow this setup if your cable provider activated the wall jacks in your house so that you do not have to plug your devices into the cable modem. Your cable telephone service comes from the wall jacks.
Connecting the printer to a non ‑ RJ ‑ 11 wall jack To connect: 1 Connect one end of a telephone cable to the port of the printer. 2 Connect the other end of the cable to the RJ ‑ 11 adapter, and then connect the adapter to the wall jack.
If the additional device (telephone or answering machine) has an RJ-11 connector, then you can remove the wrap plug and connect the device to the port of the printer. Connecting the printer in countries or regions that use serial connection In some countries or regions, you need to plug all devices into the wall jack.
To connect: Connect the cable from the wall jack to the port of the printer. Connecting the printer to a wall jack in Germany The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. The F port is for telephones.
Connect the printer to any of the N ports. To connect: 1 Connect one end of a telephone cable to the port of the printer. 2 Connect the other end of the cable to the RJ ‑ 11 adapter, and then connect the adapter to an N port. 3 If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as shown.
Setting the fax footer From the printer control panel, navigate to: > Setup > > Fax Setup > > Ringing and Answering > > Fax Footer > > On > Setting the date and time 1 From the printer control panel, navigate to: > Setup > > Device Setup > > Date/Time > 2 Enter the date, and then press .
From here You can 2 ‑ Sided Faxes • Set the printer to print incoming faxes on both sides of the paper. Dialing and Sending • Set your fax name and fax number. • Adjust the dialing volume. • Set the dial method, redial time, number of redial attempts, dialing prefix, and fax sending speed.
Creating a contact list You can create a contact list using the Address Book in the printer control panel or the phone book in the fax software. If you create a contact list in the printer control panel, then the fax software automatically saves those contacts as Phonebook entries.
5 From the Phonebook field, choose a phone book. 6 Select the contact that you want to add, and then click Add to or change list to import the contact. Note: To add contacts, you need to import contacts from the phone books on your computer that are supported by the fax software.
Tips for sending faxes • Make sure the printer is on and connected to a working telephone, DSL, or VoIP line. The line is working if you hear a dial tone. • Make sure the paper exit tray is fully extended and the tray extension is flipped out. • Depending on your printer model, use the ADF when scanning two ‑ sided (duplex) pages.
7 Select Include Cover Page with Fax , and enter the appropriate information if you want to include a cover page with the fax. 8 Click OK . For Macintosh users 1 With a document open, choose File > Print . 2 From the Printer pop ‑ up menu, select the fax version of your printer.
Tips: • If the printer is sharing the line with other analog devices (telephone, answering machine), then set the printer to pick up calls two rings after the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings.
For Macintosh users a From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder. b Double-click Printer Settings , and then configure the fax settings.
How many rings should I set? If the printer is sharing a line with an answering machine, then set the printer to pick up after a greater number of rings than the answering machine. For example, if the answering machine picks up calls after four rings, then set the printer to pick up after six rings.
How do I adjust the speaker volume on the printer? Listen to the dial tone to check if the telephone line is working and to check if the cables and devices are connected properly in your telephone network. If you set the printer to receive faxes manually, then make sure that you set the ringer volume loud enough for you to hear it.
Choose a fax quality that best suits the capacity of the receiving fax machine and the quality of the original document. Quality Black resolution Color resolution Standard 200 x 100 200 x 200 Fine 200.
How do I print the fax history of the printer? You can print reports of sent or received faxes, or both. 1 From the printer control panel, navigate to: > Setup > > Fax Setup > > Fax Rep.
d Use the keypad to enter the fax number, and then press . e Repeat steps 2b through 2d until you have added all the numbers that you want to block. You can block up to 50 numbers. 3 Block unidentified faxes (faxes without a Caller ID number). a Press the arrow buttons to scroll to Block No ID , and then press .
Networking Installing the printer on a wireless network Wireless network compatibility Your printer may contain an IEEE 802.11b, IEEE 802.11g, or IEEE 802.11n wireless print server. Your printer is compatible with IEEE 802.11 b/g/n routers that are Wi-Fi certified.
A valid WEP key has: • Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9. or • Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, punctuation, and symbols found on a keyboard. No Security It is not recommended to use no security at all on a home wireless network.
If your wireless network is not using security, then you will not have a security key. Note: If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility of the computer network adapter and look for the network name.
Encryption Check the encryption method used on your network. Note: Some authentication types may be available only in select printer models or operating systems. Authentication type Encryption method Open Mode • None • WEP Shared Mode WEP WPA Personal TKIP WPA2 ‑ Personal • TKIP • AES WPA2 ‑ Enterprise • TKIP • AES 802.
3 Double-click the software installer package, and then follow the instructions on the computer screen. Note: Select Wireless connection when prompted to select a connection type. Installing the printer on other computers Once the printer is set up on the wireless network, it can be accessed wirelessly by any other computer on the network.
Indicator light Printer status Off • The printer is turned off or is powering up. • The printer is not connected to an Ethernet or a wireless network and is in Sleep mode. • The printer has not been configured for an Ethernet or a wireless network.
For Macintosh users Select Other Wireless Network from the list, and then click Continue . b Enter the details about your wireless network. Note: Your WEP, WPA, or WPA2 key may be obtained from the bottom of the box, the documentation that came with the box, or from the box Web page.
Advanced wireless setup Adding a printer to an existing ad hoc wireless network Before you begin, make sure: • Your wireless network adapter is properly attached to your computer and is working. • The ad hoc wireless network that the printer will connect to is available.
Configuring Wi ‑ Fi Protected Setup manually Note: Make sure your access point (wireless router) is Wi ‑ Fi Protected Setup (WPS) certified. For more information, see the User’s Guide .
• CA certificate EAP ‑ TLS • RADIUS user name • CA certificate • Signed certificate EAP ‑ TTLS • Appropriate inner authentication • RADIUS user name • RADIUS password • CA certificate Configuring 802.1X Authentication The information to complete is dependent on the 802.
• The hostname of the printer • Any security information required for authentication to the network Note: Make sure you have an Ethernet cable to connect the printer to the network, and an available port, either on a networking device or a wall jack, that physically connects the printer to the network.
Using the printer wirelessly Select the connection type that describes how you currently access your printer: If the printer is currently set up locally (using USB connection) 1 Click or Start . 2 Click All Programs or Programs , and then select the printer program folder from the list.
Using the printer over an Ethernet network Select the connection type that describes how you currently access your printer: If the printer is currently set up for wireless 1 Plug an Ethernet cable into the printer and into an available port on a switch or wall jack.
If the printer is currently set up locally (using USB connection) 1 Close all open applications. 2 Insert the installation software CD. If the installation dialog does not appear after a minute, then click the CD icon on the desktop. 3 Double ‑ click Lexmark Extras > Lexmark Setup Assistant .
Using the printer over an Ethernet network Select the connection type that describes how you currently access your printer: If the printer is currently set up for wireless 1 Plug an Ethernet cable into the printer and to an available port on a switch or wall jack.
2 Identify the printer: a On the computer that is attached to the printer, open the printers folder: 1 Click , or click Start and then click Run . 2 In the Start Search or Run box, type control printers . 3 Press Enter , or click OK . b Right ‑ click the name of your printer.
Networking FAQ What is Wi ‑ Fi Protected Setup? Wi ‑ Fi Protected Setup (WPS) is a simple and secure configuration that allows you to establish a wireless home network and enable network security without requiring prior knowledge of Wi ‑ Fi technology.
What is an SSID? A Service Set Identifier (SSID) is the name that identifies a wireless network. All devices on the network must know the SSID of the wireless network, or they will not be able to communicate with each other. Usually, the wireless network broadcasts the SSID to allow wireless devices in the area to connect to it.
– ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a WPA/WPA2 preshared key/passphrase are case ‑ sensitive. • View the security settings on the access point. 1 Open a Web browser. Type the IP address of the access point in the address field, and then press Enter .
Scenario 2: Wireless network with Internet access • All computers and printers connect to the network using a wireless access point or wireless router.
What is a USB cable? A Universal Serial Bus (USB) cable is primarily used to connect a USB device to a host. Common hosts include computers and video game consoles.
2 Firmly plug the square end of the USB cable into the back of the printer. 3 Firmly plug the rectangular end of the USB cable into the USB port of the computer. 4 Follow the instructions on the computer screen. How are infrastructure and ad hoc networks different? Wireless networks can operate in one of two modes: infrastructure or ad hoc.
Infrastructure Ad hoc Requirements for all devices Unique IP address for each device Yes Yes Mode set to Infrastructure mode Ad hoc mode Same SSID Yes, including the access point Yes Same channel Yes, including the access point Yes We recommend setting up a network in infrastructure mode using the installation software CD.
How can I improve wireless signal strength? A common reason wireless printers fail to communicate over a network is poor wireless signal quality. If the signal is too weak, too distorted, or blocked by an object, then it cannot carry information between the access point (wireless router) and the printer.
A RRANGE THE NETWORK TO REDUCE SIGNAL ABSORPTION Even when the wireless signal is able to pass through an object, it is slightly weakened. If it passes through too many objects, then it can be significantly weakened.
For Macintosh users with an AirPort base station In Mac OS X version 10.5 or later 1 From the Apple menu, navigate to: System Preferences > Network > AirPort The SSID of the network that the computer is connected to is displayed in the Network Name menu.
What is a MAC address? A Media Access Control (MAC) address is a 48 ‑ bit identifier associated with the hardware of network equipment. The MAC address may also be called the physical address because it is connected to the hardware of a device instead of its software.
Notes: • A list of MAC addresses can be set on an access point (wireless router) so that only devices with matching MAC addresses are allowed to operate on the network.
Locating the printer IP address • From the printer, print a network setup page. In the TCP/IP section, look for Address . • View the printer settings. From the printer control panel, navigate to: > Setup > > Network Setup > > Wireless 802.
Maintaining the printer Maintaining ink cartridges In addition to the following tasks that you can perform, your printer performs an automatic maintenance cycle if it is plugged into a properly grounded, working electrical outlet. It will briefly come out of Sleep mode or will temporarily turn on if it is turned off.
Cleaning the printhead nozzles If you have not been using the printer for a long period, then you may need to clean the printhead nozzles to improve the quality of your prints. Keep your printer plugged to a properly grounded, working electrical outlet to allow it to perform automatic maintenance cycles.
Cleaning the scanner glass Clean the scanner glass and other related parts when vertical streaks appear on your printed pages or when you see marks or smudges on such parts. 1 Dampen a clean, lint ‑ free cloth with water. 2 Gently wipe clean the scanner glass and other related parts.
• Keep the printer in an upright position to prevent the ink from leaking. • Avoid severe jarring movements. Maintaining the printer 129.
Troubleshooting Before you troubleshoot Use this checklist to solve most printer problems: • Make sure the power cord is plugged into the printer and into a properly grounded, working electrical outlet. • Make sure the printer is turned on. • Make sure the printer is securely connected to the computer, print server, or network access point.
Incorrect language appears on the display If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: C HANGE THE LANGUAGE USING THE PRINTER.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer. The USB port is marked with . Note: If you continue to have problems, then try another USB port on the computer. You may have connected to a defective port. R ECONNECT THE PRINTER POWER SUPPLY 1 Turn off the printer.
R ECONNECT THE PRINTER POWER SUPPLY 1 Turn off the printer. Note: Make sure the printer is not in Sleep mode. Press and hold for three seconds to turn off the printer. 2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply.
Printer is busy or does not respond If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: M AKE SURE THE PRINTER IS NOT IN S LEEP MODE If the power light is blinking on and off slowly, then the printer is in Sleep mode.
M AKE SURE THE USB PORT IS ENABLED IN W INDOWS 1 Click , or click Start and then click Run . 2 In the Start Search or Run box, type devmgmt.msc . 3 Press Enter , or click OK . The Device Manager opens. 4 Click the plus sign ( + ) beside Universal Serial Bus controllers.
Change [Paper Source] to [Size] [Type] Paper Try one or more of the following: • Select the paper tray with the correct paper size or type. • Press to continue printing after loading the correct paper size and paper type in the default paper tray.
• Cancel the current job. Ink Cartridge Error The printer is unable to authenticate one or more of the installed ink cartridges. Try one or more of the following: • Press to cancel the current job. • Use only genuine Lexmark ink cartridges. • Install the specified ink cartridges properly.
Load [Paper Source] with [Size] Paper Try one or more of the following: • Load the specified paper in the tray. • Press to clear the message and continue printing. • Press to cancel the current job. Load [Paper Source] with [Size] [Type] Paper Try one or more of the following: • Load the specified paper in the tray.
Paper Tray [x] Removed Do one or more of the following: • Insert the specified paper tray into the printer. • Press to clear the message. Printer Memory Full Try one or more of the following: • Depending on your printer model, touch OK or press to clear the message, and then try printing again.
3 Wipe the printhead contacts and the contacts inside the printhead carrier using a clean, lint ‑ free cloth. 4 Reinsert the printhead, and then close the latch until it clicks into place. 5 Close the printer. Note: If removing and reinserting the printhead does not resolve the error, then turn off the printer, and then turn it back on.
3 Close the printer. • Press to clear the message. • If your printer did not come with a printhead, then visit the Lexmark support Web site at http://support.
5 Insert the supported printhead, and then close the latch until it clicks into place. Note: Make sure to install the ink cartridges into the printhead. For more information, see “Replacing ink cartridges” in the User’s Guide . 6 Close the printer.
Scanner Disabled Try one or more of the following: • Check the printer software settings or the Administration settings from the printer to enable the scanner. For more information, contact customer support. • Press to clear the message. Short Paper Try one or more of the following: • Touch OK or press , depending on your printer model.
Paper jam in the printer Note: The parts inside the printer are sensitive. Avoid unnecessarily touching these parts while clearing jams. Check the jam clearance area 1 Lift the scanner unit. 2 Remove the jam clearance cover. Notes: • Squeeze the snap to lift the jam clearance cover.
3 Firmly grasp the paper on both sides, and then gently pull it out. Note: Make sure all paper fragments are removed. 4 Reattach the jam clearance cover until it clicks into place. 5 Close the printer. 6 Touch OK or press , depending on your printer model.
2 Firmly grasp the paper on both sides, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Insert the tray. 4 Touch OK or press , depending on your printer model. Paper jam in the exit tray 1 Firmly grasp the paper, and then gently pull it out.
1 Push down the duplex latches, and then remove the duplex unit. 2 Firmly grasp the paper, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Reinsert the duplex unit. 4 Touch OK or press , depending on your printer model.
Check the ADF 1 Press the ADF button, and then open the ADF cover. Scenario 1 Scenario 2 2 Firmly grasp the paper on both sides, and then gently pull it out.
3 Close the ADF cover. 4 Touch OK or press , depending on your printer model. Check under the ADF tray 1 Remove the ADF tray. 2 Firmly grasp the paper on both sides, and then gently pull it out.
3 Reattach the ADF tray until it snaps into place. 4 Touch OK or press , depending on your printer model. Paper or specialty media misfeeds These are possible solutions if paper or specialty media misfeeds or skews, or if multiple sheets feed or stick together.
C HECK MINIMUM PRINT SETTINGS Unless you are using the borderless feature, use these minimum print margin settings: • Left and right margins: – 6.35 mm (0.25 in.) for letter ‑ size paper – 3.37 mm (0.133 in.) for all paper sizes except letter • Top margin: 1.
M AKE SURE THE INK CARTRIDGES ARE PROPERLY INSTALLED A LIGN THE PRINTHEAD C LEAN OR D EEP C LEAN THE PRINTHEAD NOZZLES Note: If these solutions do not remove the streaks or lines on the printed image, then contact technical support.
C HECK YOUR COMPUTER PERFORMANCE You may need to change how your computer manages resources and processes. For more information on improving computer performance, see the documentation that came with your operating system.
M AKE SURE THE DOCUMENT OR PHOTO IS LOADED FACEDOWN ON THE SCANNER GLASS AND IN THE CORRECT CORNER Partial copies or scans of documents or photos If the "Before you troubleshoot" checklist d.
M AKE SURE THE PRINTER SOFTWARE IS INSTALLED ON THE DESTINATION COMPUTER Fax troubleshooting • “Fax troubleshooting checklist” on page 155 • “Cannot send faxes” on page 156 • “Cannot r.
Cannot send faxes If the “Fax troubleshooting checklist” does not solve the problem, then try one or more of the following: M AKE SURE THAT YOU HAVE REGISTERED YOUR USER INFORMATION IN THE PRINTER If you did not enter your user information during initial setup, then enter your fax name and fax number.
Make sure that the dial prefix entered in the printer is correct for your network. 1 From the printer control panel, navigate to: > Setup > > Fax Setup > > Dialing and Sending > > Dial Prefix > 2 Press the arrow buttons to create or modify the prefix.
M AKE SURE THAT YOU HAVE THE CORRECT MANUAL ANSWER CODE If you set the printer to receive faxes manually (Auto Answer Off), then you need to press the correct code when a fax comes in so that the printer can receive it.
Error Message: What it indicates: Possible solutions: Unsupported Compression The fax modem of the receiving fax machine does not support data compression. Fax modems compress data to speed up transmission, but the receiving fax modem needs to have the same compression code.
Error Message: What it indicates: Possible solutions: No Answer Auto Answer may have been turned off on the receiving fax machine. • Verify the number, and then resend the fax.
Ethernet Networking Make sure: • The Ethernet cable and connectors are not damaged. Check the connectors at both ends for any obvious damage. If possible, use a new cable. • The Ethernet cable is firmly plugged in to the printer and to the network hub or wall connection.
Notes: • Your port may be working fine, but certain conflicts can occur with multiple USB devices. Try disconnecting one of your other USB devices. • If the USB port on the computer is not working, then try using the other USB ports on the computer.
4 Watch the Device Manager window while connecting a USB cable or another device to the USB port. The window refreshes when the Device Manager recognizes the USB connection. • If there is activity on the Device Manager but none of the previous solutions worked, then call customer support.
Resetting the wireless settings to factory defaults 1 From the printer control panel, navigate to: > Setup > > Restore Factory Defaults > 2 Press the up or down arrow button to scroll to Restore Network Settings , and then press . 3 Press the left or right arrow button to scroll to Yes , and then press .
If your access point is using WPA or WPA2 security, then the WPA passphrase should be: • Exactly 64 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9. or • From 8 to 63 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard.
For Windows users 1 Obtain the SSID of the network that the computer is connected to. a Type the IP address of your access point into the address field of your Web browser. If you do not know the IP address of the access point: 1 Click , or click Start and then click Run .
If you do not know the IP address of the access point, then do the following: a From the Apple menu, navigate to: System Preferences > Network > AirPort b Click Advanced or Configure . c Click TCP/IP . The Router entry is typically the access point.
3 Press Enter , or click OK . 4 Type ipconfig , and then press Enter . The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100. For Macintosh users 1 From the Apple menu, navigate to: About This Mac > More Info 2 From the Contents pane, choose Network .
5 Click the Ports tab, and then locate the selected port. The selected port has a check mark beside it in the Port column. 6 If the Description column of the selected port indicates that it is a USB port, then scroll through the list and select the port with Printer Port in the Description column.
E LIMINATE NETWORK CONGESTION If a wireless network is too busy, then the computer and printer may have difficulty communicating with each other. Some causes of wireless network congestion can include.
To assign a static IP address to the printer: 1 Complete the wireless setup, allowing the printer to receive a DHCP address from a DHCP server on the network. 2 Print a network setup page to see what IP address is currently assigned to the printer. 3 Open a Web browser and then type the printer IP address in the address field.
Notices Product information Product name: Lexmark Pro710 Series Machine type: 4449 Model(s): 701, 70E Edition notice November 2011 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC.
UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense. Trademarks Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc.
The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.
Waste from Electrical and Electronic Equipment (WEEE) directive The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.
ENERGY STAR Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.
By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 240 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.
provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See your setup documentation for more information. The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone line.
Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected.
South Africa telecommunications notice This modem must be used in conjunction with an approved surge protection device when connected to the PSTN. Using this product in Switzerland This product requires a Swiss billing tone filter (Lexmark part number 14B5109 or 80D1877) to be installed on any line which receives metering pulses in Switzerland.
Regulatory notices for wireless products This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.
Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.
Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC.
Statement of Limited Warranty Lexmark Pro710 Series Lexmark International, Inc., Lexington, KY This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.
Extent of limited warranty Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.
LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT: BY USING THIS PRODUCT, YOU AGREE TO BE BOUND BY ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT.
OR RECORDS, FOR CLAIMS OF THIRD PARTIES, OR DAMAGE TO REAL OR TANGIBLE PROPERTY, FOR LOSS OF PRIVACY ARISING OUT OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE PROGRAM, OR OTHERW.
9 ADDITIONAL SOFTWARE . This License Agreement applies to updates or supplements to the original Software Program provided by Lexmark unless Lexmark provides other terms along with the update or supplement. 10 TERM . This License Agreement is effective unless terminated or rejected.
2 This product is based on Microsoft Print Schema technology. You may find the terms and conditions upon which Microsoft is licensing such intellectual property at http://go.
Index Numerics 2 ‑ sided, fax setting 84 802.1X authentication 106 A ad hoc network 118 ad hoc wireless network adding a printer 104 additional computers installing wireless printer 101 Address Book.
contact list setting up 86 contact list, e ‑ mail creating 70 setting up 70 Continue button unavailable 161 copier or scanner does not respond 153 copies making 57 copy and scan troubleshooting cann.
Fax Modem Error 159 No Answer 160 No Caller ID 160 Phone Line Busy 159 Phone Line Error 159 Phone Line is connected to the incorrect jack on the back of the machine 159 Phone Line Not Connected 159 Re.
IP address 124 configuring 103 IP address of computer finding 124 IP address of printer finding 124 IP address, assigning 125 iron-on transfers loading 38 J jam clearance cover location 10 jams and mi.
printing from a flash drive 48 scanning for editing 65 PictBridge and USB port location 11 PictBridge-enabled camera, connecting 48 poor quality at the edges of page 150 poor scanned image quality 153.
reports, fax setting 84 resetting wireless settings to factory defaults 164 resetting to factory defaults 20 resuming print job 54 retrieving failed faxes 96 ringer volume adjusting 93 RJ ‑ 11 adapt.
tips for copying 57 e ‑ mailing 72 printing 41 receiving faxes 89 scanning 63 sending faxes 88 transmission report, fax 94 transmit key WEP 105 transparencies loading 38 tray loading paper 31 trays .
wired (Ethernet) networking for Macintosh 107 wired (Ethernet) networking for Windows 107 wireless 122 Macintosh 109 network indicator light 101 wireless network adding a printer to existing ad hoc ne.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Lexmark 701 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Lexmark 701 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Lexmark 701, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Lexmark 701 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Lexmark 701, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Lexmark 701.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Lexmark 701. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Lexmark 701 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
