Manuel d'utilisation / d'entretien du produit KH 2156 du fabricant Kompernass
Aller à la page of 26
UNIVERSAL REMO TE CONTR OL K OMPERNASS GMBH BURGSTRASSE 21 ⋅ D-44867 BOCHUM www .k ompernass.com ID-Nr .: KH2156-08/09-V3 UNIVERSAL REMO TE CONTROL Operating manual 3 A 08/2009 KH 2156.
KH 2156.
- 1 - INDEX P A GE Important safety instructions 2 Device summary 3 Initial use 4 Unpacking the device / checking the pack age contents 4 Inser ting the batteries 4 Operating components 5 L CD display.
- 2 - Universal remote control KH2156 Read the oper ating instructions carefully before using the de- vice for the rst time and preserve this booklet for later refer - ence. P ass this manual on to whoever might acquir e the device at a future dat e.
- 3 - Damage to t he device If the device is defectiv e, do not attempt to repair it y our- • self. In case of damage, contact the manufacturer or the manufacturer's service hotline (see W arranty information).
- 4 - Initial use Unpacking the device / checking the pac k age contents Impor tant! K eep the plastic packaging w ell away from small childr en. There is a risk of suocation! Unpack the device and accessories.
- 5 - Note: If no L CD display q is visible check the polarity of the batteries or install new ones. Operating components LCD display The L CD display q is divided into elds. T ext field 2! Here is sho wn the currently selected device, for e xample DVD, TV VCR etc.
- 6 - The standard r eadout of the L CD display q consists of the details for the rele vent device, for e x ample, "T V", the initial for the day of the week and the time of day indicator . Buttons Note: All the functions described here can, of course, only be used if they ar e suppor ted by the device being contr olled.
- 7 - CH +/— buttons u Change the reception channel. MA CRO button i MA CRO button i follo wed by a number button o 1-4 activates a pr eviously sav ed chain of commands.
- 8 - Record/playback buttons f The playback buttons f control de vices such as DVD/CD players and video r ecorders: Recor d Start playbac k Stop Playback/R ecord/Wind P ause playback Wind for ward Re wind Mute switching g Switch sound on/o. V OL+/— buttons h Set volume (V olume).
- 9 -.
- 10 - Code Setup (Progr amming the remote control) 3 P ro gra mmi ng m etho ds a re av aila ble for the re mot e co ntr ol: Progr amming by brand code sear ch, by automatic code search and b y direct code input (manual).
- 11 - 9. If most of the buttons function press the OK button k t o save the setting. In the L CD display q "OK" appears. Now the mode "BRAND CODE" appear s again. 10. If, how ever , none or only a few of the buttons function select with the or button t the next code and test again as described in step 8.
- 12 - 1. Press the device butt on e for the device that is to be con- trolled (i.e. V CR). 2. Switch the device that is to be controlled with the remo te control on. With V CR/DVD/CD de vices please inser t a tape and/or disc. 3. Hold down the S button r for a little longer than 3 sec- onds.
- 13 - Sy s tem-Setup Setting the time The L CD display q show s you the time of day . Y ou set this as follow s: 1. Hold down the S button r for a little longer than 3 seconds. The notice "CODE SETUP" appears. If appo x. 15 seconds passes without an entr y the device exits the menu and returns to the standar d display .
- 14 - Adjust contrast Y ou can set the display's contrast as follow s: 1. Hold down the S button r for a little longer than 3 sec- onds. The notice "CODE SETUP" appears. 2. With the or button t select "SY STEM SETUP" and conrm with the OK button k .
- 15 - Timer Setup The URC oers 2 timer modes, sleep timer and e vent timer . Sleep timer 1. Press the device butt on e for the device that is to be con- trolled (i.e. V CR). 2. Hold down the S button r for a little longer than 3 sec- onds.
- 16 - Tips: 1. P er timer memor y slot a maximum of 14 buttons can be progr ammed. Af ter entr y of t he 14th button the sequence will be automatically saved and "FULL" is sho wn in the L CD display q . 2. In this menu also the device will return to the standar d dis- play af ter appro x.
- 17 - 5. First pr ess the button on the URC that is to be taught. In the L CD display q "LEARNING" appears. The UR C now w aits for the infrar ed signal from the original remote contr ol. Note: Should the notice not change to "LEARNING" y ou have selected a button for which no button code can be taught.
- 18 - T o programme a Macro For Macr o programming pr oceed as follow s: 1. Hold down the S button r for a little longer than 3 sec- onds. The notice "CODE SETUP" appears. 2. With the or button t select "MA CRO SETUP" and conrm with the OK button k .
- 19 - T o delete all Macros T o delete all pre-pr ogrammed Macros pr oceed as follow s: 1. Hold down the S button r for a little longer than 3 sec- onds. The notice "CODE SETUP" appears. 2. With the or button t select "MA CRO SETUP" and conrm with the OK button k .
- 20 - Note: The input of the channel numbers can vary according to the model and brand of the selected devices. If necessary , with multi-digit channel numbers you must r st press the button a .
- 21 - For operation T o operate one of the pr ogrammed devices with the UR C > rst press the corr esponding device button e . Then point the URC to this de vice and press the desired button. Put the number buttons > o ex actly as you do with the original remote contr ol.
- 22 - It is possible that you ar e using the wrong code. Star t the > brand code sear ch, the automatic code search or the di- rect code input (manual). The URC does not change the station on the device. Press the corresponding de vice button > e to set the UR C to the correct mode.
- 23 - Every consumer is legally obliged to surrender batteries/ • recharg eable batteries to a community collection centre in their district or to a dealer . The purpose of this obliga- tion is to ensure that batteries are disposed of in a non- polluting manner .
- 24 - Note : The warranty pr ovisions co ver only material or factor y defects. The warranty pr ovisions do not co ver par ts subject to wear and tear • for damage to break able parts, such as switches or • recharg eable batteries. This product is for priv ate use only and is not intended for commercial use.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kompernass KH 2156 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kompernass KH 2156 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kompernass KH 2156, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kompernass KH 2156 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kompernass KH 2156, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kompernass KH 2156.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kompernass KH 2156. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kompernass KH 2156 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
