Manuel d'utilisation / d'entretien du produit DDX4033M du fabricant Kenwood
Aller à la page of 88
DD X6033B T DD X6033B TM DD X6033 DD X4033B T DD X4033B TM DD X4033 DD X4033M MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL GET0908-001A (MN/M2N/XN) © 2012 JVC KENWOOD Corporation This instruction manual is used to describe models listed below . Model availability and featur es (functions) may differ depending on the country and sales area.
2 English Cont ents Before use ..........................................3 How to reset your unit .............................................3 INTRODUCTIONS Initial Settings ...................................5 Initial setup ........................
English 3 W ARNINGS: ( T o prevent accidents and damage) • DO NOT install an y unit or wire any cable in a location where; – it may obstruct the steering wheel and gearshift lever operations. – it may obstruct the operation of safety devices such as air bags.
4 English The marking of products using lasers The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
English 5 Initial Settings Initial setup When you power on the unit for the first time or reset the unit, the initial setting screen appears. • Y ou can also change the settings on the < Setup > screen.
6 English Updating the sy stem Y ou can update the system by connecting a USB device containing the update file. 1 Create an update file , copy it to a USB device , and connect it to the unit. T o connec t a USB device, ☞ page 80. 2 On < T op Menu >: 3 4 Application V ersion Updates the System application.
English 7 Setting the security function Y ou can set a secur ity code to protect your receiver system against theft. Registering the security code 1 Display the security code setting screen. On < T op Menu >: • T o clear the registered security code, per form step 1 and press [ CLR ] in < Security Code >.
8 English C omponent names and functions Screen ( T ouch panel) Monitor panel 1 Reset button/P ower indicator/Security indicator • Resets the unit. ( ☞ page 3) • Lights up while the unit is turned on. • Flashes when the security function is activated.
English 9 Screen ( T ouch panel) Monitor panel DD X4033BT/DD X4033BTM/DD X4033/DDX4033M 1 L oading slot 2 0 (Eject) button • Ejects the disc. 3 Reset button/P ower indicator/Security indicator • Resets the unit. ( ☞ page 3) • Lights up while the unit is turned on.
10 English Setting the clock 1 Display the <T op Menu> screen. On the source control scr een: 2 Display the <Setup> screen. 3 Display the <Clock> screen. 4 Set the clock time. NA V * 1 Synchroniz es the clock time with the connected navigation unit.
English 11 T urning on the power DDX6033B T/DDX6033B TM/ DDX6033 DDX4033B T/DDX4033B TM/ DDX4033/DD X4033M T urning off the power DDX6033B T/ DDX6033B TM/DDX6033 (Hold) DDX4033B T/ DDX4033B TM/DDX4033/ DDX4033M (Hold) Adjusting the panel angle (Only for DD X6033BT/DDX6033B TM/ DD X6033 ) Y ou can change the panel angle.
12 English Putting the unit in standb y 1 2 T urning off the screen DDX6033B T/ DDX6033B TM/DDX6033 (Hold) DDX4033B T/ DDX4033B TM * 1 (Hold) DDX4033/DD X4033M * 2 (Hold) The screen is turned off . T o turn on the screen, press MENU. • Y ou can also tur n on the screen by touching the display .
English 13 Source contr ol screen • Pr essing MENU on the monitor panel also displays < T op Menu >. * 1 Appears only when a navigation unit is connected. Displays the navigation screen. * 1 ( ☞ page 39) Pr ess [ ] to return to the previous screen.
14 English • T o display all sources and items, ☞ page 15. • Y ou can change the items (other than [ SETUP ]) to display on the < T op Menu > screen. ( ☞ page 15) NA V * 1 * 2 ( ☞ page 39) Displays the navigation screen when a navigation unit is connected.
English 15 Displaying all sour ces and items On < T op Menu >: DDX6033B T (Region3)/DDX6033B TM/ DDX4033B T (Region3)/DDX4033B TM DDX6033/DD X4033 (Region3)/ DDX4033M DDX4033 (Region.
16 English Ejecting a disc DDX6033B T/DDX6033B TM/DDX6033 DDX4033B T/DDX4033B TM/DDX4033/ DDX4033M • Y ou can ejec t a disc when playing another A V source. • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust.
English 17 Play able disc types Disc type Recording forma t, file type, etc. Playable DVD DVD-Video * 1 Region Code: • F or DDX6033BT/DD X6033/DDX4033BT/ DDX4033: 3/4 (depending on the country and s.
18 English Playback operations T o display the source c ontrol screen, ☞ page 14. For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2/JPEG Media type Playing time • DVD Video: Title no./Chapter no . • DVD-VR: Program no. (or Pla ylist no.)/Chapter no .* 1 • DivX/MPEG1/MPEG2: Folder no .
English 19 Playing Recordable/Rewritable discs • This unit can recogniz e a total of 5 000 files and 250 folders (a maximum of 999 files per folder). • Use only “finalized” discs. • This unit can play back multi-session discs; however , unclosed sessions will be skipped while playing.
20 English Video menu oper ations Y ou can display the video menu screen during video playback. • Available items on the scr een differ depending on the types of the loaded disc and playback files. • The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds.
English 21 Only for VCD 1 2 Direct selecting buttons ( ☞ below) ZOOM Displays the picture siz e selecting screen. ( ☞ page 45) Aspect Selec ts the aspect ratio. ( ☞ page 45) Picture Adjust Displays the picture adjustment screen. ( ☞ page 44) MENU Displays the disc menu.
22 English <DISC Mode> settings Disc Setup items S electable setting/item Initial: Underlined For DVD/DVD-VR Menu Language Select the initial disc menu language; Initial English ( ☞ page 71). Subtitle Language Select the initial subtitle language or erase the subtitle ( OFF ); Initial English ( ☞ page 71).
English 23 • This unit can play JPEG/DivX /MPEG1/ MPEG2/MP3/WMA/W A V/AAC files stored in a USB mass storage class device. • This unit can recognize a t otal of 5 000 files and 250 folders (a maximum of 999 files per folder). • Make sure all impor tant data has been backed up to avoid losing the data.
24 English • Available items diff er depending on the types of playback file. * 1 T o cancel random or repeat mode, press the button repeatedly until the indicator disappears . * 2 Y ou cannot activate the repeat mode and the random mode at the same time.
English 25 Prepar ation • Connect iPod/iP hone. ( ☞ page 80) – When connecting iPhone/iPod touch, turn off App beforehand; otherwise the playback may not be started after connection.
26 English iP od/iPhone playback opera tions from the unit • T o display the source c ontrol screen, ☞ page 14. • T o change settings for video playback, ☞ page 20.
English 27 Selecting an audio/video file from the menu 1 2 Selec t the menu (audio or video) ( 1 ), a category ( 2 ), then a desired item ( 3 ). • Select the item in the selected layer until a desired file starts playing.
28 English Using the smar tphone — MirrorLink Basic MirrorLink operations 1 Connect your smartphone to the SMARTPHONE ADAPTER unit (K CA-ML100). 2 On < T op Menu >: A combination of your smartphone screen and control buttons appears as follows: Displays the home screen of your specialized application.
English 29 Updating the firmw are Check the firmware version, and if necessary, update the firmware. (Y ou do not need to connect your smartphone.) • Do not turn off the power during update. 1 Visit the websit e (http:// kenw ood.com/cs/c e/), download the update da ta, and save it t o the root folder of an SD or SDHC card.
30 English Listening to the radio • The ST indicator lights up when receiving an F M stereo broadcast with sufficient signal strength. [ P1 ] – [ P6 ] • Selects a stored station. (Pr ess) • Stores the current station. (Hold) [ MODE ] Enters the < T uner Mode > settings.
English 31 Changing the display information • This feature is a vailable only for Region 2/3 models. Preset list Displays the text information PS (station name) for FM Radio Data System when PS sign.
32 English Storing stations in memory Y ou can preset six stations for each band. Automatic presetting — AME (Auto Memory) 1 2 (Hold) Local stations with the strongest sig nals are searched and stored aut omatically. Manual presetting 1 T une in to a station y ou want to preset.
English 33 Activating/deactivating TI/News Standby Reception • This feature is a vailable only for Region 2/3 models. TI Standby Reception TI indicator TI indicator TI Standby Reception Lights in white The unit will temporarily switch to T raffic Information ( TI) if available.
34 English T racing the same program— Network- T racking Reception • This feature is a vailable only for Region 2/3 models. When driving in an area where F M reception is not sufficient enough, th.
English 35 (Only for DDX6033B T (Region 4)/DDX4033BT (R egion 4)/DDX4033 (Region 4)) Pandora application r equires a data connection on your smartphone with ser vice currently available in Australia and New Zealand . • Y ou can operate Pandora using the remote contr oller.
36 English Selecting a device to connect for Pandora rec eption (Only for DDX6033B T (Region4)/DDX4033B T (Region 4)) Y ou can connec t the device for P andora reception either with Bluetooth connection or wired connection. Select the connecting method.
English 37 Requirements for Pandor a® iPhone or iPod touch • Use an Apple iPhone or iP od touch running under iOS3 or later . • Install the latest version of the Pandora application on y our iPhone or iPod touch. (Sear ch for “P andora ” in the Apple iT unes App Store to find and install the most current version.
38 English A V-IN name ( ☞ below) ☞ page 39 1 Connect external components to A V-IN1 and iP od/A V-IN2 input terminals. T o connec t external components, ☞ pages 80 and 81 . 2 Selec t “ A V-IN 1” or “ A V-IN 2” as the source . ( ☞ page 14) Using other e x ternal components A V-IN T o display the source c ontrol screen, ☞ page 14.
English 39 T o view the naviga tion screen On < T op Menu >: or On any screen: The navigation screen is activated. • While the navigation screen is displayed , the touch panel operations are available only for using navigation function.
40 English Sound adjustment Selecting a preset sound mode 1 On < T op Menu >: 2 3 Selec t a sound mode. Changes the page Storing your o wn adjustment Customizing preset sound mode 1 Selec t a sound mode. ( ☞ “Selecting a preset sound mode”) 2 Set <SystemQ- Ex> to [OFF] ( 1 ), then press [ T one] ( 2 ).
English 41 Adjusting the cr ossover frequency 1 On < T op Menu >: 2 3 Select the item to adjust, then make adjustment. Adjusts the subwoof er level. Adjusts the cross ov er frequency. Selects the phase for the subwoofer . * 2 Adjusts the crossov er for front or rear speakers (high pass filter).
42 English T o select a panel color For making your own c olor adjustment, ☞ below Variable c olor illumination • Illumination color changes gradually. Making your own color adjustment • Y ou can mak e your own color adjustment only when < User > is selected.
English 43 Using your favorite sc ene as the background While playing a video or JPEG, you can capture an image and use the captured image as a background. • Y ou cannot capture copyrighted content and images from iP od/iPhone, or videos/ JPEG from smartphone.
44 English Setting for video playback Y ou can change the setting for video playback. Picture adjustment Y ou can adjust the pic ture quality. 1 Display the adjustment menu. 2 Selec t [DIM ON] (dimmer on) or [DIM OFF] (dimmer off ). 3 Adjust the picture (–15 to +15).
English 45 Changing the aspect ratio Y ou can change the aspec t ratio for video playback. 1 2 4:3 signal 16:9 signal FULL*: F or 16:9 original pictures JUST: F or 4:3LB original pictures Normal*: F or 4:3 original pictures Auto : • F or “ DISC ”/” USB ” only: The aspect ratio is automatically selected to match to the incoming signals.
46 English Activating the rear view camera 1 On < T op Menu >: 2 T o deactivate, select [ OFF ]. Displaying the picture from the rear view camera The rear view screen is display ed when you shift the gear to the reverse (R) position. • T o erase the caution message, touch the screen.
English 47 Registering/Changing the functions 1 On < T op Menu >: 2 3 4 Press a steering r emote controller button t o register/ change. 5 Selec t a function to assign. Using the steering remote c ontroller Y ou can assign the func tions to the keys of the remote controller on the steering wheel.
48 English Setting menu items • Y ou cannot change <Audio> settings when [ST ANDB Y ] is selected on <T op Menu>. ( ☞ page 12) Menu item Selectable setting/item Initial: Underlined Audio F ader/Balance F ader : Adjust the front and rear speaker output balance.
English 49 Menu item Selectable setting/item Initial: Underlined Display Dimmer ♦ Auto : Dims the screen and button illumination when you turn on the headlights. • The ILL UMI lead connection is required. ( ☞ page 79) ♦ ON : Activates dimmer .
50 English Menu item Selectable setting/item Initial: Underlined Input A V Input Y ou can deter mine the use of the iPod/A V-IN2 input terminal. ♦ A V-IN2 : Selec t to play an A V component connec ted to the iP od/A V-IN2 input terminal. ♦ iPod : Selec t when connecting the iPod/iPhone using the USB Audio and Video cable for iPod/iP hone.
English 51 Menu item Selectable setting/item Initial: Underlined System Clock Adjust the clock time. ( ☞ page 10) Beep ♦ ON ♦ OFF : Activates the k ey-touch tone. : Cancels. Remote Sensor ♦ ON ♦ OFF : Activates the remote sensor . : Cancels.
52 English Memorizing/recalling the settings Y ou can memor ize the settings changed in the < Setup > menu and recall the memorized settings anytime. • The memorized settings are kept even when the unit is reset. 1 On < Setup >: 2 • T o cancel, press [ No ].
English 53 Informa tion for using Bluetooth® devic es • While driving, do not perform complicated operations such as dialing the numbers, using phonebook, etc. When you per form these operations, stop your car in a saf e place. • Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device.
54 English Registering a new Bluetooth device When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device for reg istration. Pairing allows Bluetooth devices t o communicate each other . • The pairing method differs depending on the Bluetooth version of the device.
English 55 Deleting a register ed Bluetooth device 1 Display the <Bluetooth Setup> screen. ( ☞ page 54) 2 3 Selec t a device to delete ( 1 ), then delete the registra tion ( 2 ). * Confirmation message appears. P ress [ Ye s ]. * [ P ANDORA (SPP) ] appears only for DDX6033BT (Region 4)/DDX4033BT (Reg ion 4).
56 English 3 Setting up Bluetooth Y ou can per form general operations such as connection and initialization through < Bluetooth Setup > on the < Setup > menu.
English 57 Receiving a call When a call comes in... Call information (if acquired) Rejects the call • Phone operation is not available while the picture from the rear view camera is displayed. ( ☞ page 46) When <Auto Response> is set to [On] The unit answers the incoming call automatically .
58 English Direct number entr y Hold : Adds “+” Deletes last entry Presets the enter ed phone number on the preset list ( ☞ page 60) • Y ou can enter up to 32 numbers. V oice dialing • Available only when the connected mobile phone has the voice recognition syst em.
English 59 Using the phonebook/call lists 1 Outgoing F rom dialled call list. Incoming F rom received call list. Missed Fr om missed call list. Phonebook Fr om phonebook. • F or copying the phonebook, ☞ page 60. 2 T o use the A-Z search on the phonebook When < Phonebook > is selected, you can search by initial.
60 English Presetting the phone numbers Y ou can preset up to 6 phone numbers. 1 On < T op Menu >: 2 Selec t an item from phonebook/call lists. 3 Selec t a phone number . (Hold) 4 Selec t a preset number to store into . • Y ou can also preset the phone number entered on < Direct Number > screen by pressing [ Preset ].
English 61 About mobile phones compatible with Phone Book Access Profile (PBAP) If your mobile phone suppor ts PBAP , you can display the phonebook and call lists on the touch panel screen when the mobile phone is connected.
62 English Settings for Bluetooth mobile phone Menu items Selec table setting/item Initial: Underlined Phone Device Shows the connected phone device name. Auto Response ♦ ON ♦ OFF : The unit answers the incoming calls automatically in 5 seconds. : The unit does not answer the calls automatically.
English 63 • To register a new device, ☞ page 54. • To connect/disconnect a device, ☞ page 55. Using the Bluetooth audio pla yer T ag data (current track title/ artist name/album title) * • Pressing [<] scrolls the text if not all of the text is shown.
64 English CAUTION • Put the Remote Contr oller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Contr oller falls down and gets wedged under the pedals while driving. • Do not leave the battery near fire or under direct sunlight.
English 65 Common oper ations (A UD mode) Source switching Switches to the source to be pla yed. Hangs up the incoming/current call. V olume control Adjusts the volume. V olume attenuating Pr ess the key once to lower the volume. Pr ess again to restor e the previous volume.
66 English DVD/VCD (DVD mode) T rack search and file search Selects the track or file to be played. Play/Pause Pauses the track. Pr ess again to resume playing. Stop Memorizes the last point where the disc stopped. Direct search Pr essing this key switches the features that can be searched directly .
English 67 SUBTITLE Switches the subtitle language. ZOOM Switches the zoom ratio each time you pr ess this key. Picture Angle Switches the picture angle each time you press this key.
68 English Radio (A UD mode) Band switching Switches to bands received by the unit. Station selection Switches to broadcast stations r eceived by the unit. Seek mode switching Switches the Seek mode (A UTO1, A UTO2, MANU). Direct tuning After pressing this key, use the keypad to specify the broadcast station you wish to receive.
English 69 Caution on cleaning the unit Do not use any solvent (for example, thinner , benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit.
70 English Playing MP3/WMA/W AV/A AC files • This unit can play back files with the extension code <.mp3>, <.wma>, <.wav>, or <.
English 71 Sound signals emitted through the rear t erminals Through the analog terminals (Speaker out/F ront Preout/Rear Pr eout) 2-channel signal is emitted.
72 English What appears to be trouble is not always serious. Check the f ollowing points before calling a service center. • F or operations with the external components, refer also to the instructions supplied with the adapters used for the connections (as well as the instructions supplied with the external components).
English 73 Pandora ( Only for DDX6033BT/DD X4033BT/DDX4033 ) Message Remedy/Cause “Check Device” • Pandora application on y our iPhone/iPod touch/smartphone is not started up. • Pandora application is not installed in the connected device . • Error occurs on the P andora application.
74 English * For DDX6033BT (Region 4)/DD X4033BT (Region 4)/DDX4033 (Region 4), purchase KNA-RCDV331 separately . If there seems to be a problem Symptom Remedy/Cause General No sound comes out of the speakers. • Adjust the volume to the optimum level .
English 75 Symptom Remedy/Cause iPod/iPhone No sound comes out of the speakers. • Disconnect the iPod/iPhone , then connect it again. • Select another source and then reselect “ iPod ”. The iPod/iP hone does not turn on or does not work. • Check the connecting cable and its connection.
76 English Symptom Remedy/Cause Bluetooth (only for DD X6033BT/DD X6033BTM/ DD X4033BT/DD X4033BTM) Phone sound quality is poor . • Reduce the distance bet ween the unit and the Bluetooth mobile phone. • Move the car to place where you can get a bett er signal reception.
English 77 Ac cessories/Installa tion Pr ocedur e Ac cessories 1 ..........1 2 ..........1 (2m) 3 * 1 ..........1 4 ..........6 5 ..........6 6 * 2 ..........1 (3m) 7 ..........1 * 1 DDX6033BT/ DDX4033BT/DD X4033 of sale in Australia only. * 2 DDX6033BT/ DDX6033BTM/ DDX4033BT/ DDX4033BTM only .
78 English • Insulate unconnected wires with vinyl tape or other similar material. T o prevent a shor t circuit, do not remove the caps on the ends of the unconnected wires or the terminals. • Connect the speaker wires correctly to the terminals to which they correspond.
English 79 C onnec ting W ires to T erminals Connect to vehicle's reverse lamp harness when using the optional rear view camera. (Parking sensor wire) Connect to the vehicle's parking brake detection switch harness. For best saf ety, be sure to connect the park ing sensor .
80 English For DD X4033BT/DDX4033B TM/DDX4033/DD X4033M iPod (c ommercially available) iPod/A udio V isual input 2 (iPod/A V-IN2) (iPod/A V Input 2 switchable) USB terminal CA-U1EX* (Optional Ac cessory) USB device (commercially av ailable) For DD X6033BT/DDX6033B TM/DDX6033 Connecting a USB device/iP od/iPhone KCA-iP202 (Optional Ac cessory) (0.
English 81 C onnec ting Other Pr oduc ts Front P reout • Audio left output ( White) • Audio right output (Red) Rear Preout • Audio left output ( White) • Audio right output (Red) Rear View Camera Input • Visual input ( Y ellow) Audio/V isual Output • Visual output ( Y ellow) • Audio output (3.
82 English Installing the Microphone Unit (DD X6033BT/ DD X6033BTM/DD X4033BT/ DD X4033BTM only) 1 Check the installation position of the microphone (accessory 6 ).
English 83 Specifications Monitor section Picture Size : 6.95 inches (diagonal) wide 156.6 mm ( W ) × 81.6 mm (H) (DDX6033BT/DD X6033BTM/DDX6033 ) : 6.
84 English FM tuner section Fr equency R ange 200 kHz: 87.9 MH z – 107.9 MHz (Region 4 models only) 50 kHz: 87.5 MHz – 108.0 MH z Usable Sensitivity (S/N: 26 dB) : 9.3 dBf (0.8 μV/75 Ω) Quieting Sensitivity (S/N: 46 dB) : 15.2 dBf (1.6 μV/75 Ω) Fr equency Response (± 3.
English 85 • “DVD Logo ” is a trademark of DVD Format/L ogo Licensing Corporation registered in the US, Japan and other countries. • The “ AAC ” logo is a trademark of Dolby Laboratories. • Microsoft and Windows Media ar e either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
86 English Instruction Manual CAUTION Changes or modifications not approved by us could void the user’s authority to operate the equipment. • This adapter has been designed exclusiv ely for use with Kenwood car r eceivers. Do not use this adapter with any other car receiv er .
English Hereby , JVC KENWOOD declares that this unit KS-UB T1 is in compliance with the essential r equirements and other r elevant provisions of Dir ective 1999/5/EC. Français Par la pr ésente JVC KENW OOD déclare que l’ appareil KS-UBT1 est conforme aux exigences essentielles et aux autr es dispositions pertinentes de la directive 1999/5/CE.
EN_GET0908-001A_MX.indb 88 EN_GET0908-001A_MX.indb 88 12/11/13 11:46 12/11/13 11:46.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kenwood DDX4033M c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kenwood DDX4033M - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kenwood DDX4033M, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kenwood DDX4033M va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kenwood DDX4033M, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kenwood DDX4033M.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kenwood DDX4033M. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kenwood DDX4033M ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
