Manuel d'utilisation / d'entretien du produit KD-AR5500 du fabricant JVC
Aller à la page of 54
ENGLISH ESP AÑOL FRANÇAIS CD/SD RECEIVER KD-AR5500/KD-LHX550 RECEPTOR CON CD/SD KD-AR5500/KD-LHX550 RECEPTEUR CD/SD KD-AR5500/KD-LHX550 For canceling the display demonstration, see page 8. Para cancelar la demostración en pantalla, consulte la página 8.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.
3 ENGLISH Contents *For safety.... • Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. • Stop the car before performing any complicated operations.
4 ENGLISH How to read this manual The following methods are used to make the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see pages 41 – 44). • Button and touch panel operations are mainly explained with the illustrations as follows: Press briefly.
5 ENGLISH Control panel — KD-AR5500/KD-LHX550 1 (standby/on attenuator) button 2 Remote sensor • DO NOT expose the remote sensor to strong light (direct sunlight or artificial lighting).
6 ENGLISH Remote controller — RM-RK300 Main elements and features 1 (standby/on/attenuator) button • Turns on and off the power and also attenuates the sound. 2 SOURCE button • Selects the source. 3 5 (up) / ∞ (down) buttons • Changes the preset stations.
7 ENGLISH Getting started Basic operations To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.
8 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: All Time]—see page 26. 1 2 Select “Off.” 3 Exit from the setting. To activate the display demonstration In step 2 above, select “All Time” or “Interval.
9 ENGLISH Radio operations Listening to the radio ~ Select “TUNER.” Ÿ Select the band (FM/AM). ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same icon again. To tune in to a station manually In step ! on the left.
10 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 • Holding or can display the Preset Station List (see step 5 below). 3 4 5 Storing stations in memory You can preset six stations for each band.
11 ENGLISH Preset Station List The lists show either the station frequency or assigned name (the first 8 characters). Listening to a preset station 1 2 Select a preset station (1 – 6) you want. • Holding or can display the Preset Station List (see below).
12 ENGLISH About MP3 and WMA tracks MP3 and WMA (Windows Media ® Audio) “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • When an MP3 or a WMA folder includes an image <jll> file edited by Image Converter (Wide Ver 1.
13 ENGLISH Playing discs in the CD changer About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your receiver. • You can also connect other CH-X series CD changers (except CH-X99 and CH-X100). However, they are not compatible with MP3 discs, so you cannot play back MP3 discs.
14 ENGLISH To eject the SD card, press the SD card again. ! Attach the control panel. ⁄ • The control panel goes back to the previous position (see page 33).
15 ENGLISH If an SD card has been loaded.... * The album name/performer with indicator and the track title with indicator will appear if “Tag” is set to “On” (see page 28). Operation screens used for the following operations is of MP3 playback in the receiver.
16 ENGLISH Other main functions Selecting a disc/folder/track on the list 1 2 • Select a disc (only for the CD changer). If the selected disc is an MP3/WMA disc, its Folder List appears.
17 ENGLISH When using the remote controller.... • To directly select a disc in the CD changer • To directly select a track of an audio CD or a CD Text • To directly select a folder of an MP3/WMA.
18 ENGLISH 3 First time you press “+10” or “–10,” the track skips to the nearest higher or lower track with a track number of multiple ten (ex. 10th, 20th, 30th). Then each time you press the button, you can skip 10 tracks. • After the last track, the first track will be selected and vice versa.
19 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Intro play Mode Plays the beginning 15 seconds of ... Tr a c k : All tracks of the current disc or the SD card.
20 ENGLISH Sound adjustments Setting the basic sound selection menu—SEL ~ Ÿ Select a setting item. ! Adjust the selected item. A To adjust the speaker output balance between the front and rear speakers—FAD (fader). To adjust the speaker output balance between the left and right speakers— BAL (balance).
21 ENGLISH Selecting preset sound modes (i-EQ: intelligent equalizer) You can select a sound mode suitable to the music genre. Available sound modes FLA T (No sound mode is applied) , HARD RO CK, R & B, POP , JAZ Z , DA N C E , C O U N T R Y, R E GGAE , CLASSIC, USER 1 , US ER 2 , USE R 3 1 2 Select a sound mode.
22 ENGLISH Before starting the following procedure, prepare a CD-R or an SD card including still images (pictures) and animations (movies). • With Image Converter (Wide Ver 1.2) included in the supplied CD-ROM, you can create your own images and animations.
23 ENGLISH To be continued.... 4 Select a file. 5 6 • To download more pictures from the same folder, repeat steps 4 and 5 . • To download more pictures from another folder, press BACK. Then, repeat steps 3 to 5 . 7 Exit from the setting. Deleting the fi les Deleting the stored animation and pictures 1 In step ! on page 22.
24 ENGLISH 2 3 • To delete the stored animation • To delete the stored pictures 4 Repeat step 3 to delete more pictures. 5 Exit from the setting. Deleting all the stored animation and pictures 1 2 • To delete all the stored files • To delete all the stored pictures 3 Exit from the setting.
25 ENGLISH 2 Select a setting you want. UserM ovie : Your edited animation stored in “MOVIE” is activated. UserSlid e : Your edited still images stored in “PICTURE” are activated and shown in sequence. User Pi ct. : One of your edited still images stored in “PICTURE” is activated.
26 ENGLISH General settings — PSM Basic procedure You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 2 Select a PSM category. You can move to a different category by simply changing the PSM items. 3 Select a PSM item.
27 ENGLISH To be continued.... Indications Selectable settings, [reference page] MO VIE Openi ng * 1 Opening screen When you turn on (“Opening”) and off (“Ending”) the power, [25].... Defa ult : [Initial]; Factory-preset animation is used. User : Your own edited animation is used.
28 ENGLISH Indications Selectable settings, [reference page] DISP Fro m – T o * 1 Dimmer time Any hour – Any hour, [30] [Initial: 6PM– 7AM] Contrast Contrast 1 – 10 [Initial: 5] LCD T y p e Di.
29 ENGLISH Indications Selectable settings, [reference page] AU D I O VSS Voice support system Beep : A beep sounds when you operate the receiver. Vo i c e : [Initial]; Guidance is announced in the language you have selected when you operate the receiver.
30 ENGLISH 6 Set the dimmer start time. 7 8 Set the dimmer end time. 9 Exit from the setting. Changing the display color You can select your favorite display color for each source (or for all sources). Setting the display color 1 2 Selecting the dimmer mode You can dim the display at night or as you set the timer.
31 ENGLISH Creating your own color—User You can create your own colors—“USER DAY” and “USER NIGHT.” 1 In step 3 on the left, select the user color. 2 Select the primary color (R/G/B). 3 Adjust the level (00 – 11) of the selected primary color.
32 ENGLISH 2 Select a character. 3 Move to the next character position. 4 Repeat steps 1 to 3 until you finish entering the title. 4 To erase the entire title In step 3 on the left.
33 ENGLISH Changing the control panel angle When using the remote controller.... Caution: Detaching the control panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder.
34 ENGLISH You can connect an external component to the LINE IN plugs on the rear—LINE-IN and another to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied)—EXT-IN. • For connection, see Installation/Connection Manual (separate volume).
35 ENGLISH SIRIUS ® radio operations About SIRIUS radio SIRIUS is a satellite radio that can deliver digital-quality sound. SIRIUS has 65 music channels which are all commercial-free and 50 channels of sports, news, and entertainment programs.
36 ENGLISH ⁄ Select a channel for listening. Holding this button changes the channels rapidly. • When changing the category or channel, invalid and unsubscribed channels are skipped automatically. ~ Select “SIRIUS.” Ÿ Select the band. * Signal strength bar increases as the receiving signal improves.
37 ENGLISH Storing channels in memory You can preset six channels for each band. Ex.: Storing a channel into preset number 4. 1 While listening to a channel.... 2 3 Listening to a user channel 1 • If you hold the icon, the preset list will appear. 2 3 4 Select a preset number.
38 ENGLISH Selecting a category/channel on the list 1 While listening to a channel.... 2 • To select a category. The first channel of the selected category is tuned in. • If you select the current category (highlighted on the screen), its Channel List appears.
39 ENGLISH To add (restore) skipped channels, repeat the same procedure. To add (restore) all skipped channel in a category, select “ALL” category before performing the above procedure. To change the display information while listening to a channel Skipping channels While displaying the channel list (see page 38).
40 ENGLISH Maintenance How to clean the touch panel When removing stains or dust on the surface, turn off the power, then wipe with dry soft cloth. • Be careful not to scratch the surface when wiping it.
41 ENGLISH More about this receiver Basic operations General • The clock in the “BACK” icon on the screen works as the time countdown indicator. If no operation is done for a certain period of time, the current screen goes off, and the source operation screen resumes.
42 ENGLISH • While playing an SD card, the playback order may differ from other SD players. • This receiver may be unable to play back some SD cards due to their characteristics or recording conditions. • This receiver cannot play back mini SD card and MMC.
43 ENGLISH To be continued.... • This receiver can play back the files recorded in VBR (variable bit rate). The files recorded in VBR have a discrepancy in elapsed time display, and do not show the actual elapsed time. Especially, after performing the search function, this difference becomes noticeable.
44 ENGLISH Graphic displays Downloading (or deleting) files • You can download a file only while selecting “CD” or “SD” for the playback source; on the other hand, you can delete a file while selecting any source.
45 ENGLISH Symptoms Causes Remedies General • Screen suddenly goes off. There is a time limit for some operations. Finish the operation within the time limit. • Sound cannot be heard from the speakers. The volume level is set to the minimum level.
46 ENGLISH Symptoms Causes Remedies MP3/WMA disc/SD card playback • “No Files” appears on the display for a while. No MP3/WMA tracks are recorded. Change the disc or the SD card. MP3/WMA tracks do not have the extension code <.mp3> or <.
47 ENGLISH Symptoms Causes Remedies Graphisc • Download does not seem to finish. It takes quite a long time to download an animation of many frames (see page 44). • Opening and ending animation does not appear. “KeyIn CFM” is set to “Off.” Select “On” (see page 26).
48 ENGLISH Symptoms Causes Remedies SIRIUS • “CALL 1-888-539- SIRIUS TO SUBSCRIBE” scrolls on the display. Subscription has not been done. Starts subscribing (see page 35). • “No Signal” appears on the display. Signals are too weak. Move to an area with stronger signals.
49 ENGLISH Specifications AUDIO AMPLIFIER SECTION Power Output: 22 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal to Noise Ratio: 80 dBA (reference: 1 W into 4 Ω ) Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! © 2004 Victor Company of Japan, Limited EN, SP, FR 1204DTSMDTJEIN Rear_AR5500[J]f.
KD-AR5500/KD-LHX550 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement GET0282-002A [J] 1204DTSMDTJEIN EN, SP, FR J Handles Manijas Poignées F Washer.
When installing the receiver without using the sleeve / Instalación de la unidad sin utilizar la cubierta / Lors de l’installation de l’appareil scans utiliser de manchon In a Toyota for example, first remove the car radio and install the receiver in its place.
A Typical Connections / Conexiones tipicas / Raccordements typiques Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this receiver. The leads of the power cord and those of the connector from the car body may be different in color.
4 C Connecting the external amplifiers / Conexión a los amplifi cadores externos / Connexion d’amplifi cateurs extérieurs You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this receiver.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC KD-AR5500 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC KD-AR5500 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC KD-AR5500, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC KD-AR5500 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC KD-AR5500, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC KD-AR5500.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC KD-AR5500. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC KD-AR5500 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
