Manuel d'utilisation / d'entretien du produit ET-3302-J du fabricant John Deere
Aller à la page of 20
7-Inch Disc Grinder Operator's Manual 1 CAUTION RISK OF INJURY! READ MANUAL BEFORE OPERATING! THIS MANUAL IS AN IMPORTANT PART OF THE DISC GRINDER AND SHOULD REMAIN WITH THIS UNIT WHEN YOU SELL OR RENT IT.
2 7-Inch Disc Grinder Operator's Manual Congratulations on the purchase of your new disc grinder! You can be assured your grinder was constructed and designed with quality and performance in mind. Each component has been rigorously tested to ensure the highest level of acceptance.
7-Inch Disc Grinder Operator's Manual 3 T able of Content SAFETY .................................................................................................................. 4-10 GENERAL SAFETY RULES ........................................
4 7-Inch Disc Grinder Operator's Manual RECOGNIZE SAFETY INFORMATION This is the safety alert symbol. When you see this symbol on your tool or in this manual, be alert to the potential for personal injury. Follow recommended precautions and safe operating practices.
7-Inch Disc Grinder Operator's Manual 5 NEVER TOUCH MOVING PARTS Never place your hands, fingers or other body parts near the tool’s moving parts. NEVER OPERATE WITHOUT ALL GUARDS IN PLACE Never operate this tool without all guards or safety features in place and in proper working order.
6 7-Inch Disc Grinder Operator's Manual DRESS PROPERLY Do not wear loose clothing or jewelry. They can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair.
7-Inch Disc Grinder Operator's Manual 7 CAUTION STORE TOOL PROPERLY When not in use, the tool should be stored in a dry place. Keep out of reach of children. Lock-out the storage area. KEEP WORK AREA CLEAN Cluttered areas and benches invite injuries.
8 7-Inch Disc Grinder Operator's Manual HANDLE TOOL CORRECTLY Operate the tool according to the instructions provided herein. Do not drop or throw the tool. Never allow the tool to be operated by children, individuals unfamiliar with its operation or unauthorized personnel.
7-Inch Disc Grinder Operator's Manual 9 USE OF EXTENSION CORD Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
10 7-Inch Disc Grinder Operator's Manual IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE DISC GRINDER WARNING: DEATH OR SERIOUS BODILY INJURY COULD RESULT FROM IMPROPER OR UNSAFE USE OF THE DISC GRINDER. 1. NEVER operate the disc grinder without its wheel guard in place.
7-Inch Disc Grinder Operator's Manual 11 Functional Description MODEL : ET-3302-J 7-INCH DISC GRINDER NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool.
12 7-Inch Disc Grinder Operator's Manual WARNING: BE SURE TO SWITCH POWER OFF AND DISCONNECT THE PLUG FROM THE RECEPTACLE TO AVOID SERIOUS TROUBLE.
7-Inch Disc Grinder Operator's Manual 13 1. Power source: Ensure that the power source to be utilized conforms to the power source requirements specified on the product nameplate.
14 7-Inch Disc Grinder Operator's Manual OPERATION: 1. Always hold the handle and side handle of the POWER TOOL firmly. Otherwise the counterforce produced may result in inaccurate and even dangerous operation.
7-Inch Disc Grinder Operator's Manual 15 OPERATION (CONTINUED): 3. Grinding angle: Use only its peripheral surface by tilting the grinding wheel at an angle of 15° - 30°, as shown in Fig. 3-a. CAUTION: DO NOT UTILIZE THE ENTIRE SURFACE OF GRINDING WHEEL WHEN GRINDING.
16 7-Inch Disc Grinder Operator's Manual Maintenance and Inspection WARNING: BE SURE TO SWITCH POWER OFF AND DISCONNECT THE PLUG FROM THE RECEPTACLE DURING MAINTENANCE AND INSPECTION. 1. Replacing the grinding wheel: Replace the grinding wheel when it has been worn out to about 2-3/8" (60mm) in external diameter.
7-Inch Disc Grinder Operator's Manual 17 Maintenance and Inspection WARNING: ACCESSORIES FOR THIS POWER TOOL ARE MENTIONED IN THIS INSTRUCTION MANUAL. THE USE OF ANY OTHER ATTACHMENT OR ACCESSORY CAN BE DANGEROUS AND COULD CAUSE INJURY OR MECHANICAL DAMAGE.
18 7-Inch Disc Grinder Operator's Manual Notes.
7-Inch Disc Grinder Operator's Manual 19 Notes.
20 7-Inch Disc Grinder Operator's Manual Manufactured for Deere & Company, Moline, Illinois 61265 7-Inch Disc Grinder Operator's Manual 110 Code No.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté John Deere ET-3302-J c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du John Deere ET-3302-J - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation John Deere ET-3302-J, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le John Deere ET-3302-J va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le John Deere ET-3302-J, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du John Deere ET-3302-J.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le John Deere ET-3302-J. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei John Deere ET-3302-J ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
