Manuel d'utilisation / d'entretien du produit SoloPRO eSATA/USB 2.0 du fabricant ioSafe
Aller à la page of 27
910 -10920-00 REV 02 Users Manual io Safe ® So loPRO Externa l Hard Drive – eSA TA/USB 2.0 eSATA/USB 2.0 Fireproof Waterproof Data Recovery Service FloSafe Cooling T echnology 3 Year Limited Wa rra.
2 Contents Welcome ............................................................................................................ 3 Precautions ........................................................................................................ 7 Package Contents .
3 Welcome Thank you for pur chasing the ioS afe ® SoloPRO extern al hard drive - the firs t high capacity ext ernal hard drive a vailable with prot ection from fires and floods. For years, ioSafe has contin ued to set the st andard for disaste r proof hardware.
4 Copyrights Copyright ioSafe, Inc. 2010. All righ ts reserved. No part of this publication may b e reproduced or t ransmitted i n any form by any me ans, electronic, mechanic al photocopying, reco rding or otherwi se, without prior written con sent.
5 This equipment h as been tested a nd found to comply with t he limits for a Class B digital device, pursuant to Part 15 of the FC C rules. The se limits are designed to p rovide reasonable protection again st harmful interference in a r esidential install ation.
6 CE Compliance F or Europe Marking by the CE sy mbol indicate s compliance of t his system to the applicable Council Directi ves of the Euro pean Union, including the EM C Directive (2004 /108/EC) and the L ow Voltage Direct ive (2006/95/EC).
7 Precautions Please read the pr ecautions listed below. F ailure to do so m ay result in dam age to the device, loss o f data, and voidin g of the warran ty If you are using the Sol oPRO for primary storage (as oppose d to data backup) we stron gly recommend t hat you backup your data.
8 Package Contents Included in the p ackage: A. ioSafe SoloPR O external hard dri ve B. AC power Module C. US Power Cord D. USB 2.0 Cab le E. eSATA Cable F.
9 Specifications Dimensions (Inc hes) .......................................................... 5.0W X 7.1H X 11.0L Weight (Lb) ................................................................................................... 15 Interface Transfer Rate USB 2.
10 System Requirements For Windows: The SoloPRO dr ive is formatte d with an NTFS fi le system, a default f or the Windows OS. For Mac: The Solo is supporte d on Mac’s using the G 3 (or later) or In tel processor. When connecting to a Mac, the SoloPRO dri ve will nee d to be reformatted o nce connected.
11 About USB 2.0 USB 2.0 has a ma ximum interface transfer rate, or bandwi dth, of 480 Mbps (Megabits per sec ond). The performan ce depends o n many factors including: CPU, file system o verhead, num ber of attached US B devices and more.
12 About eSATA eSATA, or extern al SATA, is a high performance inte rface that pro vides up to 6x faster transfer rate s than USB 2. 0 (up to 3 Gbits/s ec).
13 Securing the SoloPRO ( Suggestions) Kensington ® Security Slot For drive security, the SoloPRO is equipped w ith a Kensing ton security slo t, which supports a standard Kensi ngton security c able (sold separately). For more informatio n on the Kensing ton security slo t and available products, visit www.
14 For Added Security For added securit y, the SoloPRO can be sec ured with a c able and padlock or bolted to a floor. See the pictures below f or suggest ed methods on p hysically securing the Solo PRO .
15 Connecting the SoloPR O to Your Computer Using the USB connection 1. Connect the incl uded power supply to the back of t he SoloPRO . CAUTION! To avoid d amage to the power supply connect or, make sure it is aligned correctly before pluggi ng it into the dr ive.
16 4. Verify that the Driv e Mounts. Before storing d ata on the SoloPRO, the drive must be “mounted” to t he computers operati ng sys tem. This means that t he computers o perating system has recognize d at least one readabl e partition on the drive and established a communication li nk with it.
17 eSATA Connection For best perform ance and compatib ility with Windows Server and Lin ux , connect the drive to an eSATA host adapter or a built-in external eS ATA connection. Con nect the drive to USB if a sup ported eSATA conne ction is not available.
18 3. Connect the included power supply to the SoloPRO. CAUTION! To avoid damage t o the power s upply connector, m ake sure it is aligned corre ctly before plugg ing it into the drive. Do not mo ve the drive while it is powered up to a void drive dam age or data loss.
19 6. Verify that the Driv e Mounts. Before storing d ata on the SoloPRO, the dr ive must be “mounted” t o the computers ope rating system. T his means that the c omputers opera ting system has recognized a t least one readable part ition on the dri ve and established a communication link with it.
20 Disconnecting and Reconnecting the Drive using eSATA eSATA supports h ot-swapping by d esign, however, t his feature requires proper support a nd setup at the h ost, device (drive) , and operating-system level. If not prope rly configured you may have to po wer off your com puter and the SoloPRO before di sconnecting.
21 Formatting the Solo PRO for Mac OS The SoloPRO is fo rmatted NTFS an d may not be rec ognized by M ac OS 10.2 and earlier. You may get an alert me ssage which read s: “You have inserte d a disk containing n o volumes that Mac OS can read.” Clic k the ignore button and follow the ste ps below.
22 ioSafe Data Recovery Service Terms and Conditions As applicable du ring the Data Reco very Service pe riod and upon v alidated registration of an ioSafe (the Company) product on t he Company's we bsite (www.iosafe.com) , the Company or its contracted par tner will assist the original purchase r for one "data recover y event".
23 The Company's g ood faith attemp ts to restore and recover the dat a in accordance with these terms and conditions shall be the purch aser's sole and exclusive remedy and the Company shall not be liable for a ny damages whatsoever.
24 Following a Disaster If the SoloPRO is exposed to a disa ster such as a flood or fire, you shoul d immediately call the ioS afe Disaster Respon se Team at 1- 888 -98 4-6723 (US & Canada) or 1- 530 - 886 -1578 (Internatio nal) extension 430. Yo u can also sen d an email to disast ersupport@iosafe.
25 3. Report disaster ev ent, and obtain re turn shipping add ress/instructio ns 4. Drain any free wa ter from the ioSaf e device if post-flood 5. Place the ioSafe d evice in a heavy d uty plastic bag 6. Place the bagged ioSafe device in a small cardboard box with a pape r marked with the RMA #, name, phone and a ddress 7.
26 ioSafe Warranty If a mechanical or oper able part of an ioS afe malfunctions or breaks down during normal us e, ioSafe will at our o ption, repair or re place said pa rt free for a period of three ( 3) years from the date of purcha se.
27 ioSafe Contact Information Corporate Headquarters ioSafe, Inc. 2422 Lindbergh St . Auburn CA 95602 Phone: 888.98. IOSAFE (984.6723) Phone: 530.886.1578 Fax: 888.FAX.IOS AFE International Fax: 530. 653.2015 Email: info@iosafe.com Disaster Su pport Phone: 888.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté ioSafe SoloPRO eSATA/USB 2.0 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du ioSafe SoloPRO eSATA/USB 2.0 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation ioSafe SoloPRO eSATA/USB 2.0, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le ioSafe SoloPRO eSATA/USB 2.0 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le ioSafe SoloPRO eSATA/USB 2.0, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du ioSafe SoloPRO eSATA/USB 2.0.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le ioSafe SoloPRO eSATA/USB 2.0. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei ioSafe SoloPRO eSATA/USB 2.0 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
