Manuel d'utilisation / d'entretien du produit Scanjet Enterprise Flow 7000 s2 du fabricant HP
Aller à la page of 62
HP Scanjet Enterprise 7000 s2/Flow 7000 s2 User Guide.
Copyright and license © 2013 Copyright Hewlett-Packard Development Company, L.P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice.
Table of contents 1 Pr oduct basi cs .... ........ .......... ........ ........... ........ ........... ......... ......... ......... .......... ........ .... ..... 1 Product fe atures .. ............. ........... ............ .......... .............
Detect misfeeds ........ ......... ......... ........... ......... ......... ........... ......... ......... ........... ......... ....... ....... 21 4 Care and maintenance ............. ..................... ................... ......................
Originals are curling up in the scanner o utput tray. ............. ........................ ........... ..... 44 The bottom of the scanned image is cut off ... ..... ... .......... .......... ............. .......... .......... . 44 The scanne d images have str eaks or scratc hes .
vi ENWW.
1 Product basics This User Guide covers what you need to know about us ing your product. ● Product features ● Front view ● Front panel ● Back view ● Clean the scan rollers before scanning .
Front view 1 Document output tray 2 Control panel and LCD 3 Power button 4 Document input tray 5 Document feeder latch 2 Chapter 1 Produc t basics ENWW.
Front panel Use the buttons on the scanner front panel to star t a scan and to configure some scanner settings. Callout Item Name Description 1 Tools Opens the HP Scanner Tools Utility where you can p.
Back view Callout Description 1 Slot for a cable-type security lock 2U S B i n p u t 3 Power supply input Clean the scan rollers before scanning To optimize paper feeding perfor mance and minimize paper jams, HP recommends that you clean the scan rollers before us ing the scanne r for the fi rst time.
3. On the rear of the open docu ment feeder ha tch, raise the feed roller covers to expose the upper feed rollers. 4. On the front of the open document fe eder hatc h, squeeze in on the ta bs on the roller door assembly and pull ge ntly forward to expose the upper feed rollers.
5. Using the paper path cleaning cloth that came with your scanner (or a clean, lint-free cloth moistened with isopropyl alcohol), wipe the fe ed rollers on bo th sides of the open hatch. Wipe the rollers from the top down, rotating the r ollers a full 360 degrees to ensure that you wipe the complete surface.
Scanner software The scanner comes with a variety of scanning and document-management programs, including: ● HP Smart Document Scan Software ● HP Scanner Tools Utility ● HP TWAIN HP Smart Document Scan Software HP Smart Document Scan Software gu ides you through the scan ning process.
HP Scanner Tools Utility Use the HP Scanner Tools Ut ility to configure the list of scan profiles on the scanner fr ont panel, to create scan prof iles that us e no n-HP scanning software, to chan ge the scanner's power managem ent settings, and to find information about scanner se ttings, status, and ma intenance.
2 Use the scanner The following topics describe how to load an d scan originals. ● Load originals ● Scan documents Load originals ● Document loading tips ● Load documents ● Load cards into the docu ment feeder Document loading tips ● The maximum capacity of the document feeder is 50 sheets of 75 g/m 2 (20 lb) paper.
Torn documents Documents with paper clips or staples Carbon paper Coated paper Extremely thin, translucent paper Paper with adhesive notes or flags attached Photos Overhead transparencies Papers that .
Load documents 1. Extend the document feeder and output tr ay. a. Locate the recessed gray document feeder e xtension at the top of the input tray, and t hen press down at the arrow and releas e t o extend the document feed er. b. Slide out the output tray, and then fold out the outp ut tray extension and pap er guides.
3. Fan the stack of document pages t o ensure that t he pages do not stick together. Fan the edge that will be pointing into the feeder in one direction , and then fan that same edge in the opposite direction. 4. Align the edges of the documents by tapping the bo ttom of the stack against the table top.
Load cards into the document feeder To load cards into the document feeder, follow these steps: 1. Place the stack of cards face down with the long dimension parallel to the paper guides. 2. Adjust the paper guides to center the cards, making sure the paper guides touch the edges of the cards.
Scan from the control panel buttons To scan using the control panel buttons, follow these steps: 1. Load the originals. 2. Use and to select the scan profile you want. TIP: Pressing OK displays the scan profile's file typ e, color mode, and resolution.
3 Overview of scanning software features Experienced document management professionals migh t be interested in the following scan features. These features are availa ble from any document TWAIN or ISIS ap plication th at allows you to modify the scan settings in its user interface.
View profiles To view the existing HP Sm art Document Sc an Software profiles, follow these ste ps: 1. Click Start , point to Programs or All Programs , point to HP , point to HP Sm art Document Scan Software 3.5 , and then clic k HP Smart Document Sca n Softwar e 3.
Create scan profiles that use no n-HP scanning software If you have scanning softwa re that you want to use with your sca nner, you can create profiles that use your software. To create a scan profile that uses non- HP scan software, follow these step s: 1.
Scan long or extra-long documents By default , the sca nner will au tomatica lly detect your page size using the Auto detect size selection in the page size drop-d own list. If you select Auto detect standard size , the scanner will identify the page size based upon one o f the standard sizes in the list.
Faster scanning with hardware compression The scanner supports multiple levels of JPEG compressio n to increase th e rate of data transfer from the scanner to the scanning software on the computer. The scanning soft ware can uncompress the data in order to create scanned images.
Automatically detect page size By default , the sca nner will au tomatica lly detect your page size using the Auto detect size option, and will crop the scanned image to the size of the detected page and straighten a ny skewed content. NOTE: Use the ISIS or TWAIN us er interface to se t crop options when scanning from non-HP scanning software.
Detect misfeeds The misfeed (multipi ck) detection feature st ops the scan process if it senses th at multiple pages are fed into the scanner at one time. This feature is enabled by defa ult. You might want to disable this feature if you are scanning: ● Multipart forms (a use that HP does not recommend).
22 Chapter 3 Overview of scanning soft ware features ENWW.
4 Care and maintenance This section presents information about how to ca re for and maintain the scanner. For the latest maintenance information, see www.
Clean the scanning strips Clean both strips of glass inside the document feeder periodical ly, including any time a s canned image has streaks. Lightly dust the small strips of gr ay reflective material if debris is present. To clean these components, follow these s teps: 1.
4. Dry the scanning strips with a dry, soft, lint-free cloth, making sure to wipe the small strips of gray reflective material on each strip. 5. Close the document feeder hatch, rec onnect the USB cab le and power supply to the scan ner, and then pres s the Power ( ) button to turn on the scanner.
7. If streaks still appear, repeat steps 3 through 5. The cleaning clot h can be cycled t hrough the sca nner up to five times within 30 minutes. After that, the cloth will dry out. If repeated cycling of the clean ing cloth does not remove the streaks from the scanned images, clean the rollers.
3. On the rear of the open document feeder, raise the feed roller covers to expose the upper feed rollers. 4. On the front of the open docum ent feeder, squeeze in on the tabs on the roller door assembly and pull gently forward to expose the upper feed rollers.
5. Using an HP paper pa th cleaning cloth o r a clean, lint-free cloth mo istened with isopropyl alcohol, wipe the feed rollers on bo th sides of the open hatch. Wipe the rollers from the top down, rotating the r ollers a full 360 degrees to ensure that you wipe the complete surface.
To replace the rollers, f ollow these steps: 1. Press the Power ( ) button to turn off the scanner, and then disconnect the USB cable and power supply from the scanner . 2. Replace the rollers as described in the instructio ns that were included with the replacement kit.
30 Chapter 4 Care an d maintenance ENWW.
5 Troubleshooting This section contains solutions for common problems with the scanner. ● Scanner errors ● Basic troubleshooting tips ● Scanner installation troubleshooting ● Scanner initializ.
Error Description Paper Jam The document feeder cannot pick up th e paper or there was a misfeed (multipick). Follow these steps to resolve the erro r: 1. Remove the paper from the docume nt feeder. 2. Sort through the stack to make sure the sheets are not stuck together, and that there are no pages with attached sticky notes.
● If you receive a Scanner not found error message when trying to use the scanner, turn off the scanner, wait 30 seconds, and then turn on the scanner.
Uninstall and then re install the HP Scanjet drivers and tools If checking the scanner cable conne ctions did not solve the problem, the problem might have occurred because of an incomplete installation. Try uninstalli ng and then reinstalling the HP S canjet driver s and tools.
Check the USB connection Check the physical connection to the scanner. ● Use the cable that was included with the scan ner. Another USB cable might no t be compatible with the scanner. ● Ensure that the USB cable is securely connected between the scanner and the computer.
Check that the scanner has power The power cable is connected betwee n the sca nner and a power outlet. ● Ensure that the power cable is se curely connected betwee n the scanner and a live electrical outlet. ● If the power cable is connected to a surge protector, ensure that th e surge protector is plugged into an outlet and turned on.
The scanner has stopped working correctly If the scanner stops scanni ng, follo w these steps. After each ste p, start a scan to see if the scanner is working. If the problem persis ts, proceed with the next step. 1. A cable might be loose. Ensure that both the USB cable and power supply are prop erly connected.
Scanner operation problems ● Scanner will not turn on ● Scanner keeps turning off ● The LCD is having display is sues or sc anner buttons are not working as expected ● Scanner does not scan ri.
To change the defaults , complete these steps: 1. Press the Too ls ( ) button to start the HP Scanner Tools Utility. 2. Click the Settings tab, and then select the appropri ate Sleep Mode and Auto- Off settings.
Scanned image is fuzzy ● Verify that the document original is not fuzzy. ● Use the Kofax Virtual ReScan Software which ship ped with your scanner to proc ess the scanned data.
The scan is completely bl ack or completely white ● The item might not be placed correctly in the do cument feeder. Make sure that the item you are trying to scan is plac ed face down in the d ocument feeder. ● If you are scan ning to a black and white im age, make sure your black and white threshold is not set to either extreme (0 or 255).
Vertical white stripes appear on the printed page The destination printer might be out of toner or ink. Scan a different original to the same printer to see if the issue lies with the printer. If the second scan has the same prob le m, try scanning to a different printer.
5. If the problem persists, the buttons might be disabl ed outside of the HP Sc anner Tools Utility. Try the followin g procedure: a. Open Control Panel , select Hard ware and So und , and then selec t Scanners and Cameras (in Windows 7, select Hardware and Sound , and then select Devices and Printers ).
● The document feed er or output tray might cont ain more than the maximum number of pages. Load fewer pages in the document feeder, a n d remove page s from the output tray. ● Clean the scanner paper path to help reduce misfeeds. If misfeeds still occur, clean the rollers.
The scanned images have streaks or scratches After each step, try another scan to see if the st reak s or scratche s are still appa rent. If so, then try the next step. For information on cl eaning the scanner, see the Care and maintenance section of the User Guid e.
46 Chapter 5 Tro ubleshooting ENWW.
6 Product accessibility and support Accessibility options on this scanner include an LCD Reader and the ab ilit y to enable and disable scanner buttons. ● LCD Reader ● Control of the scanner buttons LCD Reader The LCD Reader is softwa re that outpu ts the st atus of the LCD on the scanner front panel to the computer monitor as the LCD changes.
48 Chapter 6 Product acce ssibility and support ENWW.
7 Specifications and warranty This section contains regulatory information and product specifications for your scanner. ● Scanner specifications ● Document feeder specifications ● Environmental .
Name Description Maximum paper size 220 x 3100 mm (8.7 x 122 in) Minimum paper weight 41 g/m 2 (11 lb) Maximum paper weight 209 g/m 2 (56 lb) Environmental specifications Name Description Temperature .
Disposal of Waste Equipment by Users in Private Households in the European Union This symbol on the product or on its packaging indica tes that this product must not be disposed of with your other household waste.
AND HP SPECIFICALLY DI SCLAIMS ANY IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATI SFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE. Some countries/regions, states, or pr ovinces do not allow limitations on the duration of an implied warranty, so the above limi tation or exclusion might not apply to you.
Index A about scan profiles 6 accessibility 47 applications scan from 14 Auto color detect 20 automatically crop scanned image 20 automatically detect page size 20 B Back button 3 bins locating 2 blac.
output bin locating 2 P pages missing, troubleshoot 39 pages out of order 40 paper jams 45 misfeeds 43 not feeding 43 troublesh oot 43 paper path clean 25 feeding problems 43 paper-handling 1 parts or.
Z zonal multipick detection 21 ENWW Index 55.
56 Index ENWW.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté HP Scanjet Enterprise Flow 7000 s2 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du HP Scanjet Enterprise Flow 7000 s2 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation HP Scanjet Enterprise Flow 7000 s2, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le HP Scanjet Enterprise Flow 7000 s2 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le HP Scanjet Enterprise Flow 7000 s2, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du HP Scanjet Enterprise Flow 7000 s2.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le HP Scanjet Enterprise Flow 7000 s2. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei HP Scanjet Enterprise Flow 7000 s2 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
