Manuel d'utilisation / d'entretien du produit UH50000 du fabricant Hoover
Aller à la page of 19
Owner's Manual 0 pe roti n g o n d Se rvi ci n g I nstru cti ons www.hoover.com Please review this manual before operating your Hoover@ product. =z =2 =z =t l=t @2008 Healthy Gain lnvestments, Ltd.
Thank you for choosing Please enter the complete model and serial numbers in the spaces provided. Model a HOOVER' product. ff@,lffifiiklfliitlll, #Fffqlra"*.@" frnf.lm-ffi lrE IIilEL|h[t[ M mffi** I*r/FtEtIE l||fiffi|slEilil -rs!:* UXUXXINXX Serial Number Hint: Attach your sales receipt to this owner's manual.
lmportant Safety lnstructions When using an electrical appliance, always follow basic precautions, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNINGI To reduce the risk of fire, electric shock, or injury: o Do not use outdoors or on wet surfaces.
1. Assembling cleaner This cleaner was inspected and packaged carefully before being shipped from the factory. lf you should happen to need assistance during assenrbly or operation, call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.
STEP ll Attach hose Align end of hose with projection (E) over slots (F) in dirt duct on back of handle. NOTE: Hose must be connected as shown for all operations. Slide hose into (F) and twist hose to lock it into place. Position hose over rack and into hose tube (G).
2. How to use Cleaner description Operate cleaner only at voltage specified on data plate on bottom of cleaner. The assembled cleaner will look like the drawing. l. Handle 2. Self-propel button 3. 0N-0FF switch 4. Hose 5. Tool cover 6. Powered hand tool 7.
ON-OFF Switch Plug cord into elec- trical outlet. To turn cleaner 0N, push switch up. To turn cleaner 0FF, push switch down. Note: To reduce the risk of electric shock, this appli- ance has a polarized plug Ione blade is wider than the other). This plug will fit in a polar- ized outlet only one way.
(Fig. 2.7 Continued) When the red light is on, you should take additional cleaning strokes in the area until it changes to green. o The red light may seldom come on during cleaning. This means that your cleaner is picking up primarily fine surface dust and lint which the system may not detect, or that the carpet is generally clean.
tool cover How to attach The tool cover is designed with a "break-away" feature which al- lows it to snap free if it is pushed open too far. To reattach, align hinges of cover with slots on sides of tool storage area. Push cover down to secure in place.
Sta ir Cleaning Use the hose and powered hand tool or furniture nozzle for stair cleaning. CAUTION: To prevent the cleaner from falling, always place it at the bot- tom of the stairs.
Where to buy Filter bags may be purchased from Au- thorized Hoover Dealers (Depot), Leading Retailers, from Hoover Factory Service Centers, or through Hoover lnc., on-line at www.hoover.com. What to buy To assure cleaning effectiveness, use only HOOVER@ Allergen Filtration Media Type Y Disposable Filter Bags.
Replacing final The final filter assists in the filtration process to return clean air to the room. The 3 layer filter (some models) can be washed in the sarne manner as the secondary filter and reused. To remove final filter, first open the door on the side of the cleaner (Fig.
Belt replacement The belts are located under the bottorn plate of the cleaner and should be checked from time to time to be sure thev are in rrood condition. The flat (wide) belt is described below; tlre other is described under "Brush roll replacement".
Replacing brush roll Removing brush roll Slide Brush Roll Control (Fig. 2-9) to "Hard" (0FF) position. Turn cleaner over and remove bottom plate (Fig. 3-e). Lift up brush roll and slide V-belt (D) off brush roll. Inspecting V-belt The V-belt is designed to last for a long time and is not normally replaced.
Q,,{----,,---g 3. Remove agitator including end plates (C) and discard. 4. lnspect belt to ensure that it is in good condition. lf belt is cracked, gouged or broken, replace it (see fol- lowing section). 5. lnsert brush roll through belt and position belt over gear teeth (D) on brush roll.
Edge groomer replacement When to replace The edge groomers, located on both sides of the front of the cleaner, should be replaced when they appear worn. What to buy When purchasing edge groomers, ask for HOOVER part No. 3941 1 01 B. Replacing edge groomers Disconnect cleaner from electrical outlet.
4. Trouble Shooting lf a minor problem occurs, it usually can be solved quite easily when the cause is found by using the check list below. PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION Cleaner won't .
Checking under bottom plate 5. Remove bottom plate ( Fig. 3-e) and brush roll (Fig. 3-r 5). Look into opening (F), in channnels (G) and around lin- er (H), and remove any accumulated debris. lf blockage occurs hand tool use 1. Disconnect powered hand tool from hose.
Parts and Accessories MAIL ORDER FORM Detach this sectiorr arrd mail to: Hoover, lnc. 7005 Cochrarr Road o Clenwillow 0hio o 44119 Attrr: Sales tt Service Cerrtcr Item Description Part No. Qty/ Pk. Price/Pk. atv. Total Allergen Filtration Type Y Disposable Filter Bags 40 1 01 00Y 3 $ 9.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Hoover UH50000 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Hoover UH50000 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Hoover UH50000, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Hoover UH50000 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Hoover UH50000, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Hoover UH50000.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Hoover UH50000. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Hoover UH50000 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
