Manuel d'utilisation / d'entretien du produit RocketRAID 2642 du fabricant Highpoint
Aller à la page of 35
RocketRAID 264x SAS/SA T AII Host Adapter User ’ s Guide Revision: 1.0 Date: October 2008 HighPoint T echnologies, Inc. 1.
Copyright Copyright © 2008 HighPoint T echnologies, Inc. This document contains materials protected by International Copyright Laws. All rights reserved. No part of this manual may be reproduced, transmitted or transcribed in any form and for any purpose without the express written permission of HighPoint T echnologies, Inc.
T able of Contents CONGRA TULA TIONS Specifications and Features .......................................................................................... 6 1 - RocketRAID 264x (2640X4, 2640X1 and 2642) Host Adapter layout ........................ 9 2 - LED Connections .
CUST OMER SUPPOR T Troubleshooting Checklist ......................................................................................... 3 2 4 T able of Contents CONT ACT US ...............................................................................
HighPoint T echnologies, Inc. HighPoint T echnologies, long recognized as a leader in mass storage technologies specializes in the design and manufacturer of HBA (Host Bus Adapters) and HighPoint RAID IP (Intellectual Property).
Congratulations Congratulations Y ou have purchased one of the highest performing and most cost effective 4 channel SAS RAID controllers available. The RocketRAID 264x offers the flexibility to suppor.
Congratulations • BIOS booting support • Online Array roaming • Automatic hard drive (insert / remove) detection • Automatic RAID rebuild • 64bit LBA support greater than 2TB per volume Arra.
Congratulations Physical Specifications RR2640X4 / RR2640X1 Size: (87.8mm X 64.3mm) 3.45”L x 2.53”W RR2642 Size: (79.4mm X 67.5mm) 3.13” L x 2.66” W EMI: FCC Part 15 Class B and CE Thermal and.
Congratulations 1 – RocketRAID 264x (2640X4, 2640X1 and 2642) Host Adapter layout RocketRAID 2640X4 Port1- Port4 Port1 – Port4 represent the RocketRAID 2640X4’ s 4 Internal SAS channels. 9 Port1- Port4 Port1 – Port4 represent the RocketRAID 2640X1’ s 4 Internal SAS channels.
Congratulations 10 Port1- Port4 Port1,Port2 represent the RocketRAID 2642’ s 2 External SAS channels. Port3,Port4 represent the RocketRAID 2642’ s 2 Internal SAS channels . 2 – LED Connections LED connectors (Drive-activity/Drive-failure): LED support is discussed in greater detail in the LED Connection section.
Congratulations BEEP1-Speaker Alarm (speaker): this speaker emits an audible alarm in the case of Drive/array failure. J7 (RR2640X4 and RR2640X1) This jumper supports the SAF-TE interface (I2C). J1 (RR2642) This jumper supports the SAF-TE interface (I2C).
Congratulations 12 3 – Hardware Installation Note: Make sure the system is powered-off before installing the RocketRAID host adapter. The RocketRAID 264x include both standard and low-profile brackets. It may be necessary to attach the low-profile bracket in place of the standard bracket, depend- ing upon the chassis design.
Congratulations 3 . After installing the adapter, attach hard drives to the host adapter using the appropriate data cable. These host adapters can support up to 4 3Gb/s SAS or SA T A hard drives directly . Note: Many server-level chassis include hard-disk hot-swap bays.
RocketRAID BIOS Utility RocketRAID BIOS Utility The RocketRAID 264x card will display its BIOS screen during the system’ s boot process. Press Control + H when prompted, to access the BIOS settings Menu. 1 - BIOS Settings Overview The RocketRAID 264x BIOS utility is an interface that provides management com- mands and controller related settings.
RocketRAID BIOS Utility BIOS Commands Create - this command is used to open the RAID Creation menu. Delete - this command will delete the selected RAID array. Add/Remove Spare - this command is used to assign hard disks to function as spare disks. The controller is capable of using spare disks to automatically rebuild broken or faulted RAID arrays.
RocketRAID BIOS Utility Highlight the tar get disks using the arrow keys, then select using Enter . A numeral will be displayed before each selected disk. Once all target disks have been selected, press ESC. The utility will display a warning, and ask you to press Y (yes) to initialize, or N (no) to cancel.
RocketRAID BIOS Utility 3 . Highlight the target disks that you want to use, and press Enter to select them. A numeral will be displayed before each selected disk. This number designates disk order . After all of the disks have been selected and press the ESC key to return to the Create Menu.
RocketRAID BIOS Utility 3 – Deleting Arrays Highlight the Delete command from the toolbar, and press Enter. The BIOS utility will display a list of available RAID arrays. Select the array you wish to delete, and press Enter. 6. Sector Size – Also known as “V ariable Sector Size”.
RocketRAID BIOS Utility The utility will display a warning message. Press Y (yes) to delete the array, or select N (no) to cancel. W arning: all data stored on the array will be lost – do not delete if the array contains critical data.
RocketRAID BIOS Utility 5 - Settings T o access the Settings menu, highlight the Settings command from the toolbar , and press Enter. Generally, single disks are designated to act as spares (disks that are not configured into RAID arrays). However, in some instances, disks that are members of RAID arrays may also be designated to act as a spare.
HighPoint RAID Management and Device Driver CD HighPoint RAID Management and Device Drive CD Each retail box includes a copy of the HighPoint Products Software CD. This CD can be used to generate driver diskettes, and install the HighPoint RAID Management Utility Suite for a variety of operating systems.
HighPoint RAID Management and Device Driver CD 22 2 - Device Driver Installation Windows Driver Installation (Win2000, XP, Win 2003) Before installing the RocketRAID 264x host adapter ’ s device driver , make sure the host adapter and all required hard disks have been installed into the system’ s chassis/ disk enclosure.
HighPoint RAID Management and Device Driver CD 23 Installation V erification After the driver has been installed, and the system has been restarted: 1 . Click the Start button, then right-click the “My Computer” icon. Select the Properties item from the pop up menu.
HighPoint RAID Management and Device Driver CD 24 Windows V ista/2008 Driver Installation Installing the driver during a fresh Windows Vista/2008 installation 1 . Boot from W indows V ista DVD. 2 . When the screen “ where do you want to install Windows ” appears, click “ Load driver ” and browse for the driver location.
HighPoint RAID Management and Device Driver CD 25 Installation V erification After the driver has been installed, and the system has been restarted: 1 . Click the Start button, then right-click My Computer icon. Select the Properties item from the popup menu.
HighPoint RAID Management and Device Driver CD 26 Several driver sets are also included with the RocketRAID 264x Software CD. Each binary driver and source package includes an installation guide (.pdf format). Linux Driver sets: RR264x/Driver/Linux directory.
HighPoint RAID Management and Device Driver CD 27 3 - HighPoint RAID Management Utilities (HRM) T o install the W eb RAID Management Utility for W indows Operating Systems: Click on “ Install RAID Management Software ”. Select the desired software from the drop down menu, and click on the “OK” button.
HighPoint RAID Management and Device Driver CD 28 4 . The package can also be installed manually, using a terminal. Log in as “root”, open a terminal, and browse to the location of the .rpm file. Run the following command: 5 . # rpm -i hptsvr-https-1.
HighPoint RAID Management and Device Driver CD 29 RAID Management - CLI Command Line interface versions of the RocketRAID management utilities are available for Linux and FreeBSD operating systems. These packages are posted on the HighPoint T echnologies, Inc.
HighPoint RAID Management and Device Driver CD 30 4 - Mac OS X Driver and RAID Management Installa- tion The driver and software package for the RocketRAID 264x includes both the device driver for OS X, and a copy of the W eb RAID Management utility .
HighPoint RAID Management and Device Driver CD 31 Select the installation destination: Click “ Restart”. After OS X reboots, the card will be recognized by the system. Configure arrays using the W eb RAID Management interface. User guides for the W eb interface are available from http://www.
Customer Support Customer Support If you encounter any problems while utilizing the RocketRAID host adapter, or have any questions about this or any other HighPoint product, feel free to contact our Customer Support Department.
Customer Support 33 Contact Us HighPoint Corporate Headquarter USA Address 1161 Cadillac Ct. Milpitas, CA, 95035 W ebsite: http://www .highpoint-tech.com Phone: 1-408-942-5800 (9 am ~ 6 pm PST, M-F) Fax: 1-408-942-5801 E-mail: sales@highpoint-tech.com Support: support@highpoint-tech.
FCC Part 15 Class B Radio Frequency Interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Thank Y ou Thank you for purchasing the RocketRAID 264x SA T AII/SAS RAID Host adapter . W e appreciate your support, and welcome any questions, comments or product suggestions you may have.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Highpoint RocketRAID 2642 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Highpoint RocketRAID 2642 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Highpoint RocketRAID 2642, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Highpoint RocketRAID 2642 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Highpoint RocketRAID 2642, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Highpoint RocketRAID 2642.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Highpoint RocketRAID 2642. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Highpoint RocketRAID 2642 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
