Manuel d'utilisation / d'entretien du produit CS-300 du fabricant Hi-Touch Imaging Technologies
Aller à la page of 56
www .hi-ti.com 1 HiT i Card Printer CS-300 User Manual Hi-Touch Imaging Technologies V.2007.03.
www .hi-ti.com 2 ACKNOWLEDGEMENTS Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsof t Corporations. Pentium is a U.S. registered trademark of Intel Corporation. T rueT ype is a U.S. trademark of Apple Computer , Inc. Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
www .hi-ti.com 3 SAFETY INSTRUCTIONS 1. Read these instructions carefully . Keep these instructions for future reference. Follow all warnings and instructions as marked on the product. 2. Unplug this product from the wall outlet before cleaning. Do not use liquid detergents or aerosol cleaners.
www .hi-ti.com 4 Instruction 5 Chapter 1 Hardware Inst allation 6 1-1 Check Accessories 6 1-2 Appearance Of CS-300 7 1-3 Inst all Power Cord & USB Cable 10 1-4 Inst all Cleaning Roller 1 1 1-5 Ins.
www .hi-ti.com 5 Instruction Thank you for choosing Hi T i Card Printer . W e hope this will just be the be ginning of our long-term and successful association. With this HiT i card printer , you can easily and conveniently print high quality plastic cards, such as personalized I D cards/credit cards, membership cards,.
www .hi-ti.com 6 Chapter 1 Hardware Inst allation 1-1 Check Accessories Please make sure the following items are included when you unpack the card printer . 1.Card Output Hopper 2. Weight 3. USB Cable 4. Power Cord 5. User Manual 6. CD 7. Cleaning Roller 8.
www .hi-ti.com 7 1-2 Appearance of CS-300 CS-300 Front side A. Card Input Hopper This is the Card Input Hopper for storing blank cards. Please insert t he blank cards gently and remember to shield them with the built-in cover t o avoid any dust entering in there.
www .hi-ti.com 8 CS-300 Back side D C A B A. Power Switch This switch turns the power of the printer on or off. B. Power Socket Connect your power cord here. C. USB Connector Please connect the printer to a controlling device, such as a PC or a laptop, hereby using the build-in USB connector .
www .hi-ti.com 9 Control Panel. A. LED Light T urn the powe r on. The printer will automatically initiate a system check and turn on the green LED light to indicate that the printer status is normal. If an error occurs, an error message will be shown on the LCD display and f lash t he LED.
www .hi-ti.com 10 1-3 Inst all Power Cord & USB Cable 1. Connect the printer to the AC power outlet using the supplied po wer cord. 2. Please connect the printer to a PC using the supplied USB Cable.
www .hi-ti.com 1 1 1-4 Inst all Cleaning Roller Please ※ install the cleaning roller before using the card printer . 3. Slide the ID button and lift the ribbon door up. 2. Open the cover of the cleaning module , as illustrated. 3. While holding the cover of the cleaning module open, insert the cleaning roller spool into the s pool receivers.
www .hi-ti.com 12 1-5 Inst all Card & Ribbon ※ ※ ※ ※ The HiTi card printer pack age does not include cards and ribbons. Y ou can cont act your local HiTi distributor or refer to Appendix E for consumer ordering information. The Card Installation 1.
www .hi-ti.com 13 The Ribbon Installation 1. Remove the ribbon slack by rotating the spool as illustrated. 2. Remove the fastener on the ribbon as illustrated 3. Slide the ID button and lift the ribbon door up. 4. Hold the ribbon cartridge handle and insert it into the printer as illustrat ed.
www .hi-ti.com 14 Chapter 2 Sof tware Inst allation System Require ments Please make sure your PC conforms to the following requirements . Intel Pentium or compatible PC Windows 2000/XP 128 MB RAM or higher A vailable USB port 100 MB or more free hard disk space CD-ROM Drive Notice!! 1.
www .hi-ti.com 15 2-1 Inst all Driver (Windows 2000/XP) 1.Insert the “Driver CD” into the CD-ROM drive. If the installation doesn’t start automatically; run the “autorun.exe” in the disk. Please select printer model “CS-300”. 2.Please select “Driver / HiT i CS-300” and instal l.
www .hi-ti.com 16 5. In Windows 2000 or Windows XP , if there’s message dialog showing “Digital Signature Not Found” o r “Driver Incompatibility”, please click “Y e s” to continue to install the driver . 6. After copying several files, the Windows 2000 / XP system recognizes this printer and the installation will be finished.
www .hi-ti.com 17 2-3 Inst all CardDesiree CS 1. Insert the “Driver CD” into the CD-ROM drive, if the disc doesn’t auto start, then please execute the “autorun.exe” in the disc. 2. Select "Sof tware / CardDesiree CS" and install. 3.
www .hi-ti.com 18 2-4 Driver Instruction Y ou can access the driver settings in Control Panel-> Printers . Select HiT i CS-300 and right-click the mouse button, then select “Printing Preferences”. The printer driver is divided into seven different categories (not including general properties) integrated in a main page.
www .hi-ti.com 19 [Device Option] Y ou can modify the settings of the card printer in this page. A. Ribbon T ype: Select the ribb on type you want to use. 1. YM CKO ribbon,2. Resin K ribbon or 3. YMCO ribbon. B. Card T ype: Select the card type you want to use.
www .hi-ti.com 20 ※ When you sele ct the YMCKO ribbon as your rib bon ty pe, s everal options for Resin K will be availab le. NOTE: 1. G raphical D evice I nterface, a W indows standard for dividing the images to many graphical objects and transmitting them to output d evices, su ch as monitors and printers.
www .hi-ti.com 21 [Printing Area Setting] In this page, you may modify printing areas which will be covered and uncovered by the ribbon. Y ou can design printing areas, such as the following instructions.
www .hi-ti.com 22 [Edit Area] A. Designed Area: Y ou can choose the default layout setting or the custom layout previously desi gned and saved through the drop-down list. If you would like to create a new layout, please select [ User defined ]. B. Delete: Delete the layout setting file.
www .hi-ti.com 23 [Color] Y ou may set the printing color of your preference in this page. A. Color preference setting: There are four options. 1. HiT i Optimized Color (General): The standard color present ation. 2. HiT i Optimized Color (Enhanced): S tronger contrast.
www .hi-ti.com 24 b. Please press the “ Reset ” buttons in C. Printer Color Adjuster and E. Skin T one Adjuster respectively . c. Meanwhile, unmark □ □ □ □ Image Auto Enhancement in “B. S pecial Function”. 4. Do not apply any color preference: Select this option and follow the steps below to acquire the maximum color space.
www .hi-ti.com 25 [T ools] A. Printing Posit ion Adjuster: Y ou may set the thickness of the card and print out a test chat, then modify parameter [A] or [B] or [C] to adjust the printing position.
www .hi-ti.com 26 [ Magnetic Encoding ] A Magnetic Encoding Dat a: Input Magnetic Da ta directly . When you are not using the database, you can manually enter data for th e encoding of the magnetic stripe. There are three tracks within the magnetic str ipe.
www .hi-ti.com 27 3 2468024680 4 HIJKLMN 12345678 5 12345678 2468024680 6 HIJKLMN 2468024680 7 HIJKLMN 2468024680 0987654321 a. 1 ABCDEFRG –this format is for encoding the 1st track only – ex: 1 xxxxxxxx b. 2 12345678 – this format is for encoding the 2nd track only – ex: 2 1 1 1 1 1 1 1 1 c.
www .hi-ti.com 28 Chapter 3 Operation Instruction In this Chapter , you will find a detailed introduction ab out the operation through the LCD display . 3-1 LCD display instruction The printer is equipped with an LCD Display and four buttons , which give access to printer menus.
www .hi-ti.com 29 ．． CARD OUT SNR The sensor for cards in the card-insert mechanism. (ENABLE / DISABLE) . The default s etting is [DISABLE]. However , once you switch [DISABLE] to [ENABLE] and there are no cards in the Card Input Hopper , the erro r message [CARD OUT] will b e shown o n the LC D display .
www .hi-ti.com 30 Chapter 4 How to maint ain your printer In order t o preserve t he performance of the printer and the print quality , please remember to maintain your card printer regularly . We will introduce a detailed cleaning procedure in the following sections.
www .hi-ti.com 31 4-1 Clean Cleaning Roller 1. Switch the card printer off. 2. Slide the ID button and lift the ribbon door up. 3. Open the cover of the cleaning module and take the cleaning roller off, as illustrated.
www .hi-ti.com 32 4-2 Clean Print Path In St and al one mode 1. T urn the power switch of the printer on. 2. The printer will check the system sta tus automatically , and show “Ready” on t he LCD display . 3. Click the [<] or [>] button, and select [Cleaning mode] to begin the cleaning pr ocess.
www .hi-ti.com 33 4-3 Clean TPH Head 1. Please turn off the power before cleaning the TPH head. 2. Open the ribbon door , the TPH head is attached to the ribbon door module. 3. Please use the sponge cleaning swab to clean the TPH head. ※ ※ ※ ※ Notices: 1.
www .hi-ti.com 34 4-4 Clean Air Filter 1. Switch the card printer off. 2. Open the ribbon door . 3. Slide the air filter out from the side of ribbon door and cl ean the dust on the filter , as illustrated. 4. Insert the air filter into the ribbon door and close the r ibbon door .
www .hi-ti.com 35 4-5 Cleaning Card-inse rt Mechanism 1. Switch the card printer off. 2. Open and empty the Card Input Hopper . After removing all the cards and the weight, please use the sponge cleaning swab to clean the r ollers and the sensor on the card-insert mechanism.
www .hi-ti.com 36 4.6 Clean Ribbon Sensors 1 1 1 1. Switch the card printer off. 2. Open the ribbon door . 3. Remove the ribbon cassette. 4. Please use the sponge cleaning swab to clean the ribbon sensor s , as shown. 5 . Please re-insert the ribbon cassette and close the ribbon door .
www .hi-ti.com 37 Chapter 5 T roubleshooting If there is any er ror message displayed on the LCD screen, please r ecord the message first; do not press [ OK] imm ediately .
www .hi-ti.com 38 Ribbon out The ribbon has been used up. 1. Please install a new ribbon. 2. Please follow the instructions from the LCD display to switch the ribbon sensors (Please refer to C hapter .
www .hi-ti.com 39 Card jam in card path Card jam in a flipper Card jam in the device. Please remove the card by following the instructions on the LCD monitor of the printer bef ore continuing the print job. Please press [ OK ] to get step by ste p instructions.
www .hi-ti.com 40 Cam TPH e rror Cam pinch error Cam flipper error Cam Mag error The error occurs in the mechanism . Check sum error - SDRAM Check sum error – SRAM Check sum error – FLASH Check sum error – W rong firmware The version of the firmware is not correct.
www .hi-ti.com 41 Thermal p rint head overheat 1. The printer will detect the printing temperature automatically . When the temperature is overheated, the printer will stop printing temporarily and cool the temperature down. The card printer will continue until the temperature will be below 60 ℃ .
www .hi-ti.com 42 carefully re-install it to it s proper position. 3. Please clean the chip on the side of the ribbon and re-install the ribbon. 4. Please make sure the ribbon door is clo sed. If the error message still occurs, please c ontact your nearest HiT i distributor or HiT i customer service center .
www .hi-ti.com 43 RJ-BOX FULL The rejected box is full of cards Please remove the invalid cards from the rejected box or follow the instructions from the LCD display and press [ NEXT ] → [ IGNORE THE ERROR ] to clear this error condition.
www .hi-ti.com 44 Appendix A CS-300(i) Specificat ion Model Name CS-300 CS-300i Print Method Photo-quality dye sublimation Thermal T ransfer Dual-side Printing Resolution 300dpi x 300dpi , 256 levels .
www .hi-ti.com 45 Appendix B Safety Instructions Read these instructions carefully . Save these instructions for future reference. Follow all warnings and instructions marked on the product. 1. Unplug this product from the wall outlet before cleaning.
www .hi-ti.com 46 Appendix C Limited W arranty S tatement CS-300(i) warranty period is one year f rom the date of original purchase. The detail limit ations and extent are as described here below: A.
www .hi-ti.com 47 B. Limita tions of W arranty T o the extent allowed by local law , neither HiT i nor it s t hird party suppliers make any other warranty or condition of any kind, whether express or .
www .hi-ti.com 48 Appendix D FCC Compliance S tatement FCC Information The Federal communication Commission Radio Frequency Interference S tatement includes the following paragraph: This equipment has been t ested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.
www .hi-ti.com 49.
www .hi-ti.com 50.
www .hi-ti.com 51 CE Information.
www .hi-ti.com 52.
www .hi-ti.com 53 Appendix E Customer Service Information If your printer does not function normally , please refer to the following procedures for assistance. ◆ ◆ ◆ ◆ Support Process Before you contact HiT i customer support, please try the following: 1.
www .hi-ti.com 54 Netherlands Hi-T ouch Imaging T echnologies Netherlands B.V . ESP 206, 5633 AC, Eindhoven, The Netherlands T el :+ 31-(0)40-256-5166 Fax :+ 31-(0)40-290-3176 & + 31-(0)40-290-3287 Web : http://www .hi-ti.nl Russia Hi-T ouch Imaging T echnologies (Russia Representa tive office) T rubet skaya str .
www .hi-ti.com 55 Appendix F Order Informatio n If you would like to purchase HiT i Printer or accessories. Please contact our dealer or visit HiT i W ebsite http://www . hi-ti.com for quickly order service. T aiwan Hi-T ouch Imaging T echnologies 3F , 31, Shuang-Shih Rd.
www .hi-ti.com 56 Middle East & North Africa Hi-T ouch Imaging T echnologies (Middle East) Emaar Business Park Bldg #2, Office #426 P .O Box 261750, Dubai-United Arab Emirates TEL: +971-4-3674547 F AX: +971-4-3674221 Web : http://www .hi-ti.ae E-mail ： sales-me@hi-ti.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Hi-Touch Imaging Technologies CS-300 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Hi-Touch Imaging Technologies CS-300 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Hi-Touch Imaging Technologies CS-300, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Hi-Touch Imaging Technologies CS-300 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Hi-Touch Imaging Technologies CS-300, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Hi-Touch Imaging Technologies CS-300.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Hi-Touch Imaging Technologies CS-300. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Hi-Touch Imaging Technologies CS-300 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
