Manuel d'utilisation / d'entretien du produit SL-750TV-IPI-E du fabricant Heat & Glo LifeStyle
Aller à la page of 47
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 1 • DO NOT store or use gasoline or other fl am- mable vapors and liquids in the vicinity of this or any other appliance. • What to do if you smell gas - DO NOT try to light any appliance.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 2 Listing Label Information/Location Model Name: ___________________________________________ Date purchased/installed: __.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 3 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury .
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 4 Î = Contains updated information. 14 Appliance Setup A. Remove Glass Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 33 B. Remove the Shipping Materials . . .
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 5 B. Limited Lifetime W arranty.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 6 B. Limited Lifetime W arranty (continued).
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 7 B. T empered Glass Speci fi cations Hearth & Home T echnologies appliances manufactured with tempered glass may be installed in hazardous loca- tions such as bathtub enclosures as de fi ned by the Con- sumer Product Safety Commission (CPSC).
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 8 D. High Altitude Installations NOTICE: If the heating value of the gas has been reduced, these rules do not apply . Check with your local gas utility or authorities having jurisdiction.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 9 2 2 Operat ing Instruc tions Figure 2.1 General Operating Parts B. Y our Fireplace W ARNING! DO NOT operate fi replace before read- ing and understanding operating instructions.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 10 D. Clear Space W ARNING! DO NOT place combustible objects in front of the fi replace or block louvers. High temperatures may start a fi re. See Figure 2.4. Avoid placing candles and other heat-sensitive objects on mantel or hearth.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 1 1 I. Lighting Instructions (IPI) The IPI system may be operated with two D-cell batteries. When using batteries, unplug the transformer . T o prolong battery life, remove them when using the transformer .
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 12 Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • T urn the fi replace of f and allow it to completely cool. • Remove fi xed glass assembly .
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 13 Glass Cleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle fi xed glass assembly with care.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 14 V enting Frequency: Seasonally By: Homeowner T ools needed: Protective gloves and safety glasses. • Inspect venting and termination cap for blockage or obstruction such plants, bird nests, leaves, snow , debris, etc.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 15 Figure 3.1 IPI Pilot Flame Patterns (Either cobrahead or SIT) PRODUCT SPECIFIC.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 16 A. T ypical Appliance System NOTICE: Illustrations and photos re fl ect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 17 B. Design and Installation Considerations Heat & Glo B-type vent gas appliances are designed to operate with all exhaust gases expelled to the outside of the building, and combustion air pulled from the room.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 18 Recommended Location Marginal Location Location Not Recommended Recommended Location Location NOT Recommended Multi-level Roofs Windward Leeward Figure 4.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 19 5 5 F raming and Clearances A. Selecting Appliance Location When selecting a location for the appliance it is important to consider the required clearances to walls (see Figure 5.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 20 Figure 5.2 Clearances to Combustibles B. Constructing the Appliance Chase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 21 D. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances as speci fi ed. Framing or fi nishing material closer than the minimums listed must be constructed entirely of noncom- bustible materials (i.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 22 A. V ent T ermination Minimum Clearances Roof Pitch H (Min.) Ft. Flat to 6/12...........................................................1.0* Over 6/12 to 7/12 ..........
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 23 7 7 V ent Infor mation and Diagrams B. V ent System Con fi guration CAUTION! Risk of Fire! ALL vent con fi guration speci- fi cations MUST be followed. This product is tested and listed to these speci fi cations.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 24 A. Pipe Clearances to Combustibles V ent clearances are per vent manufacturer ’s speci fi ca- tions. MUST be Listed B-V ent pipe. W ARNING! Risk of Fire! Maintain air space clearance to vent.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 25 A. Installing Outside Air Kit Damper Assem- bly CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 26 B-VENT COMPONENT SCREW FLUE OUTLET COLLAR 10-5/8 IN. COLLAR 1 0 10 Inst alli ng V ent Pipe W ARNING! Risk of Fire or Exhaust Fumes! Assemble pipe sections per B-vent manufacturer ’ s instructions.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 27 A. Fuel Conversion • Make sure the appliance is compatible with available gas types. • Conversions must be made by a qualified service technician using Hearth & Home T echnologies speci fi ed and approved parts.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 28 A. Wiring Requirements NOTICE: This appliance must be electrically wired and grounded in accordance with local codes or , in the absence of local codes, with National Electric Code ANSI/NFP A 70-latest edition or the Canadian Electric Code CSA C22.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 29 Figure 12.1 Intelli fi re Pilot Ignition (IPI) Wiring Diagram with Wall Switch or Thermostat NOTE: 1 . Ignition module, valve, pilot, and wall switch operate on 3 volts.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 30 F . W all Switch Installation for Fan (Optional) If the box is being wired to a wall mounted switch for use with a fan (See Figure 12.4): • The power supply for the appliance must be brought into a switch box.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 31 A. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances as speci fi ed. Framing closer than the minimums list- ed must be constructed entirely of noncombustible materi- als (i.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 32 B. Facing Material • Metal front faces may be covered with non-combustible materials only . • Facing and/or fi nishing materials must not interfere with air fl ow through louvers, operation of louvers or doors, or access for service.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 33 A. Remove Glass Assembly See Section 14.G. B. Remove the Shipping Materials Remove shipping materials from inside or underneath the fi rebox.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 34 Log Set Assembly: LOGS-550-E, 750-E, 950-E Model: SL-550TR-E, 750TR-E, 950TR-E, SL-550TV -E, SL-750TV -E, SL-950TV -E F . Install the Log Assembly If the gas logs have been factory installed they should not need to be positioned.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 35 Figure 7 Figure 7 Log #3 : Locate the pin hole on the underside of log #3. Mate the pin hole with the shoulder screw located on the burner top. Push the left end of log # 3 toward the back of the fi rebox until it touches the lava rock retainer .
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 36 J. Install Hood Hood is included with this appliance and required in all installations. K. Air Shutter Setting Air shutter settings should be adjusted by a quali fi ed ser- vice technician at the time of installation.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 37 1 5 15 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 38 Intelli fi re Ignition System - (continued) Symptom Possible Cause Corrective Action 4.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 39 1 6 16 Reference Materials A. Appliance Dimension Diagram Dimensions are actual appliance dimensions. Use for reference only. For framing dimensions and clearances refer to Section 5.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 40 B. Service Parts Part number list on following page. Service Parts Diagram Beginning Manufacturing Date: June 2007 End.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 41 Service Parts List SL-550TV -IPI-E IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number .
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 42 Service Parts Service Parts Diagram Beginning Manufacturing Date: June 2007 Ending Manufacturing Date: ________ 6 7 9 10 11 12 8 Part number list on following page.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 43 Service Parts List SL-750TV -IPI-E IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number .
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 44 6 8 9 10 11 12 7 Service Parts Service Parts Diagram Beginning Manufacturing Date: June 2007 Ending Manufacturing Date: ________ Part number list on following page.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 45 Service Parts List SL-950TV -IPI-E IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number .
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 46 Service Parts SL-550 / 750 / 950TV -IPI-E V alve Assembly Parts List Beginning Manufacturing Date: June 2007 Ending Manufacturing Date: ______ 1 3 4 5 6 7 8 10 11 12 13 9 2 IMPORT ANT : THIS IS DA TED INFORMA TION.
Heat & Glo • SL-550 / 750 / 950TV -IPI-E • 21 19-900 Rev . J • 12/09 47 Heat & Glo, a brand of Hearth & Home T echnologies Inc. 7571 215th St, Lakeville, MN 55044 www .heatnglo.com C. Contact Information Please contact your Heat & Glo dealer with any questions or concerns.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Heat & Glo LifeStyle SL-750TV-IPI-E c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Heat & Glo LifeStyle SL-750TV-IPI-E - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Heat & Glo LifeStyle SL-750TV-IPI-E, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Heat & Glo LifeStyle SL-750TV-IPI-E va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Heat & Glo LifeStyle SL-750TV-IPI-E, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Heat & Glo LifeStyle SL-750TV-IPI-E.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Heat & Glo LifeStyle SL-750TV-IPI-E. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Heat & Glo LifeStyle SL-750TV-IPI-E ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
