Manuel d'utilisation / d'entretien du produit GRAND-I35 du fabricant Heat & Glo LifeStyle
Aller à la page of 48
1 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Models: GRAND-I35 GRAND-I35-SP SUPREME-I30 SUPREME-I30-SP • DO NOT store or use gasoline or other fl am- mable vapors and liquids in the vicinity of this or any other appliance.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 2 Listing Label Information/Location Model Name: ___________________________________________ Dat.
3 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury .
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 4 B. Limited Lifetime W arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc.
5 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 B. Limited Lifetime W arranty (continued) 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS:.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 6 C. BTU Speci fi cations MODELS: Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP LABORA TOR Y : Underwriters Laboratories, Inc. (UL) TYPE: V ented Gas Fireplace Heater STANDARD: ANSI Z21.
7 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 2 2 Operat ing Instruc tions Figure 2.1 General Operating Parts B. Y our Fireplace W ARNING! DO NOT operate fi replace before read- ing and understanding operating instructions.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 8 C. Clear Space W ARNING! DO NOT place combustible objects in front of the fi replace or block louvers. High temperatures may start a fi re. See Figure 2.
9 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 I. Before Lighting Fireplace Before operating this fi replace for the fi rst time, have a quali fi ed technician : • V erify all shipping materials have been removed from inside and/or underneath the fi rebox.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 10 J. Lighting Instructions (IPI) The IPI system may be operated with four AA-cell batteries. When using batteries, unplug the transformer . T o prolong battery life, remove them when using the transformer .
11 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Lighting Instructions - Standing Pilot Ignition 1. Turn of f all electric power to the appliance if ser- vice is to be performed. 2. Open control access panel.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 12 Initial Break-in Procedure • The appliance should be run three to four hours continuously on high. • T urn the appliance off and allow it to completely cool.
13 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Glass Cleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle fi xed glass assembly with care.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 14 B. Maintenance T asks-Service T echnician The following tasks must be performed by a quali fi ed technician.
15 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Figure 3.1 Standing Pilot Flame Patterns Burner Ignition and Operation Frequency: Annually By.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 16 A. T ypical Appliance System NOTICE: Illustrations and photos re fl ect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale.
17 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 B. Design and Installation Considerations Heat & Glo gas inserts are designed for install.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 18 5 5 F ireplace Si ze Re quirement s Figure 5.1 Fireplace Opening In addition to these dimensions, also reference Clearances and Mantel Projections (Section 5.
19 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 B. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as speci fi ed.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 20 A. V ent T ermination Minimum Clearances Roof Pitch H (Min.) Ft. Flat to 6/12...........................................................1.0* Over 6/12 to 7/12 .
21 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 7 7 Installation Preparation Prepare the existing solid fuel masonry or factory built non-combustible fi rebox for installation.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 22 B. V enting Components CAUTION! Risk of Cuts/Abrasions/Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp.
23 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Figure 8.2 CUT AND BEND FLASHING AS NEEDED TO FIT CHIMNEY SEALANT ADHESIVE • T rim chimney top plate to minimize excess overhang or bend over fl ue tile (see Figure 8.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 24 F . Installing Adaptor and T ermination Cap For installation of termination cap see minimum vent heights for various pitched roofs (see Figure 8.
25 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 A. Fuel Conversion • Make sure the appliance is compatible with available gas types.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 26 B. Standing Pilot Ignition System Wiring • The standing pilot ignition system wiring DOES NOT require a 120 V AC supply to operate.
27 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Figure 10.2 IPI Wiring Diagram BLK RED BA TTERY P ACK 6V DC GROUND BROWN GREEN (MAIN) ROCKER .
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 28 Figure 10.4 Fan Wiring Diagram BLOWERS BLOWER RECEPT ACLE BLK GRN BLK BLK GRN BLK WHT GRN BLK.
29 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Figure 10.5 Wiring Diagram - Fan with RC200/RC300 Remote PLUG 120V EXISTING OUTLET GRN (2) BL.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 30 1 1 11 Finishing A. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as speci fi ed.
31 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 A. Remove Glass Assembly See Section 12.H. B. Remove the Shipping Materials Remove shipping materials from inside or underneath the fi rebox. C.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 32 G. Install the Log Assembly Log Set Assembly: LOGS-I35 Models: GRAND-I35, GRAND-I35-SP CAUTION: Logs are fragile, handle with care. Figure 1. Log Set Installed Figure 2.
33 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Log #3 (SRV2205-705) : Position the log groove with the 2nd grate tine from the right. Rotate the right end of the log clockwise until the end of the log contacts the grate bar .
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 34 2205-935B Figure 1 1. Log #6 Figure 12. Log #7 LOG #6 RESTING ON LOG #6 RESTING ON FLA T SPOTS FLA T SPOTS LOG #7 RESTING ON LOG #7 RESTING ON FLA T SPOTS FLA T SPOTS Log #6 (SRV2205-706): Position Log #6 as shown in Figure 1 1.
35 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 G. Install the Log Assembly Log Set Assembly: LOGS-I30 Models: Supreme-I30, Supreme-I30-SP , Supreme-I30AU CAUTION: Logs are fragile, handle with care.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 36 2206-935B Log #3 (SRV2206-702) : Position Log #3 as shown in Figure 5. Position the grate tine groove, located on the bottom of the log, over the base of the left grate tine.
37 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 I. Air Shutter Setting Air shutter settings should be adjusted by a quali fi ed ser- vice technician at the time of installation. The air shutter is set at the factory for minimum vertical vent run.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 38 A. Standing Pilot Ignition System 1 3 13 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service.
39 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 T roubleshooting (continued) Symptom Possible Cause Corrective Action 3. (Continued) C. V alve. T urn the valve knob to the ON position. Place the ON/ OFF switch in the ON position.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 40 B. IntelliFire Plus™ Ignition System Symptom Possible Cause Corrective Action 1. Pilot won’t light. The ignitor/module makes noise, but no spark.
41 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 1 4 14 Reference Materials A. Appliance Dimension Diagram Dimensions are actual appliance dimensions.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 42 Figure 14.2 Direct V ent Flex Liner Kits Figure 14.3 Direct V ent Flex Liner Accessory Kits Direct V ent Flex Liner Accessory Kits (see Figure 14.
43 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 C. Service Parts GRAND-I35, GRAND-I35-SP Beginning Manufacturing Date: June 2010 Ending Manufacturing Date: ______ 35” Metal Insert IMPORT ANT : THIS IS DA TED INFORMA TION.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 44 IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number .
45 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Service Parts GRAND-I35, SUPREME-I30 Beginning Manufacturing Date: June 2010 Ending Manufacturing Date: ______ #19 IPI V alve Assembly 19.1 19.2 19.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 46 Service Parts GRAND-I35-SP , SUPREME-I30-SP Beginning Manufacturing Date:June 2010 Ending Manufacturing Date: ______ #19 Standing Pilot V alve Assembly 19.
47 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 C. Service Parts List GRAND-I35, GRAND-I35-SP IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number .
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 48 Heat & Glo, a brand of Hearth & Home T echnologies Inc. 7571 215 th Street West, Lakeville, MN 55044 www .heatnglo.com D. Contact Information Please contact your Heat & Glo dealer with any questions or concerns.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Heat & Glo LifeStyle GRAND-I35 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Heat & Glo LifeStyle GRAND-I35 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Heat & Glo LifeStyle GRAND-I35, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Heat & Glo LifeStyle GRAND-I35 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Heat & Glo LifeStyle GRAND-I35, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Heat & Glo LifeStyle GRAND-I35.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Heat & Glo LifeStyle GRAND-I35. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Heat & Glo LifeStyle GRAND-I35 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
