Manuel d'utilisation / d'entretien du produit 5000 Series du fabricant Garmin
Aller à la page of 82
GPSMAP ® 5000 Series owner’ s manual.
© 2007 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, USA T el. (913) 397.8200 or (800) 800.1020 Fax (913) 397.8282 Garmin (Europe) Ltd. Liberty House Hounsdown Business Park, Southampton, Hampshire, SO40 9RB UK T el.
GPSMAP 5000 Series Owner ’s Manual i I ntroductIon I ntroductIon This manual includes information for the following products: GPSMAP ® 5008 GPSMAP ® 5208 GPSMAP ® 5012 GPSMAP ® 5212 T ips and Shortcuts T ouch Home from any screen to return to the Home screen.
ii GPSMAP 5000 Series Owner ’s Manual I ntroductIon t able of c ontents Introduction ...........................................................................................................................i Tips and Shortcuts ....................
GPSMAP 5000 Series Owner ’s Manual iii I ntroductIon Conguring the Unit ..........................................................................................................34 Conguring System Settings ....................................
iv GPSMAP 5000 Series Owner ’s Manual I ntroductIon Failure to avoid the following potentially hazardous situations could result in an accident or collision r esulting in death or serious injury .
GPSMAP 5000 Series Owner ’s Manual 1 G ettInG S t arted G ettInG s t arted G ettInG s t arted T o turn on your unit for the rst time, refer to the Initializing Unit Settings paragraph, page 61 .
2 GPSMAP 5000 Series Owner ’s Manual G ettInG S t arted G ettInG s t arted Power/Backlight T o turn the unit on, press and release the Power key . When the W arning screen appears, touch I Agree to open the Home screen. NOTE: The rst time you power on your unit, you must go through a setup sequence.
GPSMAP 5000 Series Owner ’s Manual 3 G ettInG S t arted G ettInG s t arted Adjusting the Backlight 1. While the unit is on, press and release the Power key . 2. T ouch Backlight . 3. T o allow the unit to automatically adjust the backlight based on ambient light, touch Auto .
4 GPSMAP 5000 Series Owner ’s Manual G ettInG S t arted G ettInG s t arted T o insert the SD card, open the access door and press it in until it clicks. GPSMAP 5008 or 5208 T o remove the SD card, press in on the card. The card pops out. Restoring Factory Settings Y ou can restore your unit to the original factory settings.
GPSMAP 5000 Series Owner ’s Manual 5 G ettInG S t arted G ettInG s t arted Understanding the Home Screen Use the Home screen to access all other screens. NOTE: Options on this screen vary based on the unit type and optional connected network devices.
6 GPSMAP 5000 Series Owner ’s Manual u SInG c hartS u sInG c harts u sInG c harts The GPSMAP 5008 and 5012 units have a basic worldwide imagery map, and the GPSMAP 5208 and 5212 have built-in detailed BlueChart g2 offshore cartography for US waters.
GPSMAP 5000 Series Owner ’s Manual 7 u SInG c hartS u sInG c harts Overlay Numbers —control how charting numbers appear on the screen. Choose to show or hide the numbers by category . T ouch Auto to show navigation, shing, and sailing numbers. When set to Auto, the overlay numbers appear only when that category is active.
8 GPSMAP 5000 Series Owner ’s Manual u SInG c hartS u sInG c harts 4. T ouch Navigate T o . 5. T ouch Go T o or Guide T o (available when using a preprogrammed BlueChart g2 Vision card to use Auto Guidance, page 27 ). 6. Follow the colored line on the screen to the destination.
GPSMAP 5000 Series Owner ’s Manual 9 u SInG c hartS u sInG c harts of the pointer . If the point is near several objects and you touch Review , you are presented with a list of the objects near the pointer ( ). Navigate T o —allows you to navigate to the selected location ( page 7 ).
10 GPSMAP 5000 Series Owner ’s Manual u SInG c hartS u sInG c harts Using Mariner ’ s Eye Mariner ’ s Eye provides an angled perspective from above and behind the boat (according to your course), and provides a visual navigation aid.
GPSMAP 5000 Series Owner ’s Manual 1 1 u SInG c hartS u sInG c harts Show Radar— If you are connected to a Garmin Marine Radar through the Garmin Marine Network, you can overlay your radar readings on the Mariner ’ s Eye screen.
12 GPSMAP 5000 Series Owner ’s Manual u SInG c hartS u sInG c harts Using the SD Card Y ou can insert or remove a BlueChart g2 V ision SD card while your Garmin GPS unit is on or off. Insert the SD card into the open SD card slot on your Garmin GPS unit and press in until it clicks.
GPSMAP 5000 Series Owner ’s Manual 13 u SInG c hartS u sInG c harts T ouch the button to view closer to your boat and lower to the water . T ouch the button to move the view away from the boat. This is indicated by the scale ( ) at the bottom of the screen.
14 GPSMAP 5000 Series Owner ’s Manual u SInG c hartS u sInG c harts Fish Eye 3D Settings T o access additional settings or options for the Fish Eye 3D screen, touch MENU . Sonar Cone —turn a cone on or of f that shows the area covered by your transducer .
GPSMAP 5000 Series Owner ’s Manual 15 u SInG c hartS u sInG c harts Spot Depth —turns on spot soundings and sets a dangerous depth. Light Sectors —adjusts the drawing of light sectors on the map. Symbols —sets the navaid symbol set (NOAA or IALA).
16 GPSMAP 5000 Series Owner ’s Manual u SInG c hartS u sInG c harts Wrap —continuously records the track log, wrapping through the available memory (replacing the oldest track data with new data). Interval —denes the frequency at which the track plot is recorded.
GPSMAP 5000 Series Owner ’s Manual 17 u SInG c hartS u sInG c harts NOTE: When enabled, the high resolution satellite images are only present at lower zoom levels.
18 GPSMAP 5000 Series Owner ’s Manual u SInG c hartS u sInG c harts NOTE: T ouch and to zoom in and out while viewing the aerial photo on the full screen. T o access aerial photos from the navigation chart: T ouch Aerial Photo . ➋ T ouch a camera icon, and then touch Review .
GPSMAP 5000 Series Owner ’s Manual 19 u SInG c ombIna tIonS u sInG c ombIna tIons u sInG c ombIna tIons Use the Combinations screen to view a combination of different screens at the same tim e.
20 GPSMAP 5000 Series Owner ’s Manual u SInG c ombIna tIonS u sInG c ombIn a tIons T o customize the screen combinations: 1. While viewing a combinations screen, touch Menu > Change Combination. OR From the Home screen, touch Combinations > Unused Combo (if one is available).
GPSMAP 5000 Series Owner ’s Manual 21 W here t o W here t o W here t o Use the Where T o option on the Home screen to search for and navigate to nearby fuel, repairs, and other services, as well as waypoints and routes. NOTE: Y ou must create waypoints and routes before you can navigate to them.
22 GPSMAP 5000 Series Owner ’s Manual W here t o W here t o 3. T ouch the marine service item to which you want to navigate. A screen containing information about the selected marine service appears. 4. T ouch Navigate T o . 5. T ouch Go T o . OR T ouch Guide T o when using a preprogrammed BlueChart g2 Vision card to use Auto Guidance.
GPSMAP 5000 Series Owner ’s Manual 23 W here t o W here t o T o search for a destination by name: 1. From the Home screen, touch Where T o > Search by Name . 2. T ouch characters to spell at least a portion of the name of your destination. 3. T ouch Done to view the 50 nearest destinations that contain your search criteria.
24 GPSMAP 5000 Series Owner ’s Manual W here t o W here t o 3. T ouch Create Waypoint . 4. T ouch one of the following: Edit W aypoint —designates a specic name, symbol, water depth, water temperature, or position. Delete —deletes the waypoint.
GPSMAP 5000 Series Owner ’s Manual 25 W here t o W here t o 2. T ouch the button for the waypoint you want to edit. 3. T ouch Edit Waypoint . 4 T ouch the waypoint attribute you want to change ( Name , Symbol , Depth , W ater T emp , or Position ).
26 GPSMAP 5000 Series Owner ’s Manual W here t o W here t o Creating and Using Routes Y ou can create and store up to 20 routes, with up to 250 waypoints each. T o create a route from your present location: 1. From the Navigation Chart, touch your destination.
GPSMAP 5000 Series Owner ’s Manual 27 W here t o W here t o 2. If necessary , touch and drag the screen until the route’s starting point is displayed. T ouch the route’s starting point. The starting point is indicated by the pointer . 3. T ouch Add T urn .
28 GPSMAP 5000 Series Owner ’s Manual W here t o W here t o 2. T ouch the route to edit. 3. T ouch Edit Route . Y ou can edit the route name, turns, or delete the route.
GPSMAP 5000 Series Owner ’s Manual 29 V IeWInG I nforma tIon V IeWInG I nforma tIon V IeWInG I nforma tIon Use the Information screen to access information about tides, currents, celestial data, user data, other boats, gauges, and video.
30 GPSMAP 5000 Series Owner ’s Manual V IeWInG I nforma tIon V IeWInG I nforma tIon T o view the Current Report for the selected station, touch Show Report . V iewing Celestial Information Use the Celestial screen to view celestial data for sun and moon rise/set, moon phase, and approximate sky view location of the sun and moon.
GPSMAP 5000 Series Owner ’s Manual 31 V IeWInG I nforma tIon V IeWInG I nforma tIon T o transfer data (waypoints, routes, tracks) to or from an SD card: 1. Insert an SD card into the SD card slot on the front of the unit. 2. From the Home screen, touch Information > User Data > Data T ransfer > Card .
32 GPSMAP 5000 Series Owner ’s Manual V IeWInG I nforma tIon V IeWInG I nforma tIon T ouch Merge User Data to transfer data between all the chartplotters connected to the network.
GPSMAP 5000 Series Owner ’s Manual 33 V IeWInG I nforma tIon V IeWInG I nforma tIon V iewing Gauges Use the Gauges screen to view engine gauges in an analog or digital format. NOTE: Y ou must be connected to a NMEA (National Marine Electronics Association) 2000 network capable of sensing engine data to view the gauges.
34 GPSMAP 5000 Series Owner ’s Manual c onfIGurInG the u nIt c on fIGu rInG the u nIt c onfIGurInG the u nIt Use the Congure screen to congure unit settings. Conguring System Settings T o change general system settings from the Home screen, touch Congure > System .
GPSMAP 5000 Series Owner ’s Manual 35 c onfIGurInG the u nIt c onfIGurInG the u nIt Pressur e —individually sets the units of measure for gauge (kPa or psi) and atmospheric (Millibars or Inches of Mercury) pressure readings. Heading —sets the reference used in calculating heading information.
36 GPSMAP 5000 Series Owner ’s Manual c onfIGurInG the u nIt c on fIGu rInG the u nIt 3. T ouch the NMEA output sentence to select on or off. 4. T ouch Off to disable, or touch On to enable the 0183 NMEA output sentence.
GPSMAP 5000 Series Owner ’s Manual 37 c onfIGurInG the u nIt c onfIGurInG the u nIt 3. T ouch On to turn the alarm on and then use the touch screen keyboard to specify alarm information. Setting Navigation Alarms T o set a navigation alarm from the Home screen, touch Congure > Alarms > Navigation .
38 GPSMAP 5000 Series Owner ’s Manual c onfIGurInG the u nIt c on fIGu rInG the u nIt Setting Sonar Alarms T o set a sonar alarm, from the Home screen, touch Congure > Alarms > Sonar . Shallow W ater/ Deep W ater —sets an alarm to sound when the depth is less than or greater than the specied value.
GPSMAP 5000 Series Owner ’s Manual 39 c onfIGurInG the u nIt c onfIGurInG the u nIt Keel Offset —offsets the surface reading for the depth of a keel. This makes it possible to measure depth from the bottom of your keel instead of from the transducer ’ s location.
40 GPSMAP 5000 Series Owner ’s Manual c onfIGurInG the u nIt c on fIGu rInG the u nIt Conguring Other Boats T o congure settings for boats other than your own from the Home screen, touch Congure > Other Boats . AIS —turn AIS (Automatic Identication System) on or off.
GPSMAP 5000 Series Owner ’s Manual 41 u SInG the m arIne n etWork m arIne n etWork u sInG the m arIne n etWork The Garmin Marine Network allows you to share data from Garmin peripheral devices between Garmin chartplotters quickly and easily .
42 GPSMAP 5000 Series Owner ’s Manual u SInG the m arIne n etWork m arIne n etWork V iewing Connected Garmin Marine Network Devices T o view all connected Garmin Marine Network Devices from the Home screen, touch Congure > System > System Information > Network Devices .
GPSMAP 5000 Series Owner ’s Manual 43 u SInG r adar u sInG r adar u sInG r adar When you connect your chartplotter to an optional Garmin Marine Radar such as a GMR 404/406 or GMR 18, you can view more information about your surroundings. The radar connects through the Garmin Marine Network and shares radar data with all networked chartplotters.
44 GPSMAP 5000 Series Owner ’s Manual u SInG r adar u sInG r adar Understanding the Cruising Screen Use the Cruising screen to view a full-screen image of the gathered radar information. Y our position is in the center of the screen, and the rings provide distance measurements.
GPSMAP 5000 Series Owner ’s Manual 45 u SInG r adar u sInG r adar Guard Zone— denes a zone either fully or partially surrounding your boat. An alarm sounds when a detected object enters this zone.
46 GPSMAP 5000 Series Owner ’s Manual u SInG r adar u sInG r adar MARP A T arget (only appears when you are targeting a tagged MARP A object) — opens the MARP A target information window . Y ou can get MARP A information or remove MARP A objects from this window .
GPSMAP 5000 Series Owner ’s Manual 47 u SInG r adar u sInG r adar Radar Overlay Screen Options T o access additional settings or options for the radar overlay screen, touch Menu . There are two sets of options you can access, radar or chart. The radar setup options are the same as the radar cruising screen ( page 44 ).
48 GPSMAP 5000 Series Owner ’s Manual u SInG S onar u sInG s onar u sInG s onar When connected to an optional sounder module such as the GSD 22 and a transducer , your unit can be used as a shnder/asher . The sounder module connects through the Garmin Marine Network and shares sonar data with every chartplotter connected to the network.
GPSMAP 5000 Series Owner ’s Manual 49 u SInG S onar u sInG s onar Sonar Split Zoom Depth, temperature, and water speed GPS speed and GPS heading T ransducer frequency or beam width Zoom level Range .
50 GPSMAP 5000 Series Owner ’s Manual u SInG S onar u sInG s onar T ransducer T emperature Log T emperature and depth Time elapsed T emperature Range The temperature appears along the right side and the time elapsed appears along the bottom. The graph scrolls to the left as information is received.
GPSMAP 5000 Series Owner ’s Manual 51 u SInG S onar u sInG s onar Low —the least sensitive setting. Only the strongest returns are highlighted in white. Overlay Numbers —shows or hides water temperature, water speed (if your transducer is capable), and navigation.
52 GPSMAP 5000 Series Owner ’s Manual u SInG Xm WX W ea ther and a udIo u sInG Xm u sInG Xm WX W ea ther ™ and a udIo T o use XM WX Satellite W eather , you must have a Garmin GDL 30 or 30A XM receiver and an activated XM WX weather subscription. T o use XM Audio, you must have the Garmin GDL 30A XM receiver and an XM Audio subscription.
GPSMAP 5000 Series Owner ’s Manual 53 u SInG Xm WX W ea ther and a udIo u sInG Xm T o view the weather legend from the Home screen, touch W eather > W eather Setup > Legend > Show . NEXRAD is shown independently or with a variety of other weather information.
54 GPSMAP 5000 Series Owner ’s Manual u SInG Xm WX W ea ther and a udIo u sInG Xm center provides four forecasts at 12-hour intervals (12 Hrs, 24 Hrs, 36 Hrs, and 48 Hrs), as well as the current conditions (Now). Understanding Marine Warnings When a Marine W arning is issued, the area for the warning is highlighted in red.
GPSMAP 5000 Series Owner ’s Manual 55 u SInG Xm WX W ea ther and a udIo u sInG Xm V iewing Forecast Information Forecasts show the weather conditions including fronts and precipitation. T o view the forecast for another time period, touch Next Forecast .
56 GPSMAP 5000 Series Owner ’s Manual u SInG Xm WX W ea ther and a udIo u sInG Xm V iewing Sea Conditions Sea Conditions provide surface conditions including winds, wave height, wave period, and wave direction. Understanding Surface Winds W ind barbs indicate from which direction the wind is coming.
GPSMAP 5000 Series Owner ’s Manual 57 u SInG Xm WX W ea ther and a udIo u sInG Xm Understanding Surface Pressure This feature shows pressure isobars and pressure centers. The isobars connect points of equal pressure. Pressure readings can help determine weather and wind conditions in an area.
58 GPSMAP 5000 Series Owner ’s Manual u SInG Xm WX W ea ther and a udIo u sInG Xm V iewing Buoy Reports Report readings are taken from buoys and coastal observation stations.
GPSMAP 5000 Series Owner ’s Manual 59 u SInG Xm WX W ea ther and a udIo u sInG Xm Using XM Audio When a GDL 30A is connected to the Garmin Marine Network and to the audio input of your boat, you can listen to XM Audio channels. Selecting an XM Audio Channel T o access XM Audio from the Home screen, select Congure > XM Audio .
60 GPSMAP 5000 Series Owner ’s Manual a ppendIX a ppendIX a ppendIX a ppendIX Specications Physical Specications Size: GPSMAP 5008/5208: 6.8" H x 10.1" W x 4.17" D (173.5 x 256 x 105.9 mm) GPSMAP 5012/4212: 9.47" H x 13" W x 4.
GPSMAP 5000 Series Owner ’s Manual 61 a ppendIX a ppendIX Initializing Unit Settings The rst time you turn your unit on, you must congure a series of initial settings. These settings must also be congured when restoring factory settings ( page 4 ).
62 GPSMAP 5000 Series Owner ’s Manual a ppendIX a ppendIX Calibrating the T ouchscreen Y our unit’ s touchscreen does not normally require calibration. However , if the buttons do not seem to be responding properly , use the following process to calibrate the screen.
GPSMAP 5000 Series Owner ’s Manual 63 a ppendIX a ppendIX T o connect the GPSMAP 5000 series unit to an existing NMEA 2000 network, see the GPSMAP 4000/5000 series installation instructions.
64 GPSMAP 5000 Series Owner ’s Manual a ppendIX a ppendIX Messages and Alarms AIS: Dangerous T arget —an AIS target currently presents a collision threat. Alarm Clock — the alarm clock alarm has sounded. Anchor Drag Alarm —boat has drifted out of the user-set distance range.
GPSMAP 5000 Series Owner ’s Manual 65 a ppendIX a ppendIX Deep W ater Alarm —(sonar) boat has entered user -dened value for deep water . Directory Item With This MMSI Already Exists —MMSI unit already in directory . Directory Memory is Full Can’t Cr eate Entry —DSC directory is full, no more entries can be created.
66 GPSMAP 5000 Series Owner ’s Manual a ppendIX a ppendIX Map Format Is Not Supported —a map format on a preprogrammed SD card is not supported. Marine W eather W arning —(XM WX weather) there is a weather warning in ef fect. MARP A: Dangerous T arget —(radar) a MARP A target has become dangerous.
GPSMAP 5000 Series Owner ’s Manual 67 a ppendIX a ppendIX Route T runcated —some points on the end of the route have been discarded. Severe Storm W arning —(XM WX weather) there is a severe storm warning in ef fect. Shallow W ater Alarm —(sonar) the boat has entered the user -dened shallow water depth.
68 GPSMAP 5000 Series Owner ’s Manual a ppendIX a ppendIX W eather Service Lost —(XM WX weather) the weather service is no longer communicating. Make sure you have a strong XM signal. Check the network and the XM wiring. XM Service Incompatible. Software Update Requir ed —an XM service software update is needed.
GPSMAP 5000 Series Owner ’s Manual 69 a ppendIX a ppendIX FCC Compliance This product has been tested and found to comply with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE.
70 GPSMAP 5000 Series Owner ’s Manual a ppendIX a ppendIX Online Auction Purchases: Products sold through online auctions are not eligible for rebates or other special offers from Garmin. Online auction conrmations are not accepted for warranty verication.
GPSMAP 5000 Series Owner ’s Manual 71 a ppendIX a ppendIX This product was developed using DAFIF™, a product of the National Geospatial-Intelligence Agency . This product has not been endorsed or otherwise approved by the National Geospatial-Intelligence Agency , or the United States Department of Defense (10 U.
72 GPSMAP 5000 Series Owner ’s Manual I ndeX I ndeX A A-scope 51 add turn 26 aerial photos 1 1 , 17 AIS 32 , 40 alarms anchor drag 37 arrival 37 battery 37 deep water 38 sh 38 messages 64 setting.
GPSMAP 5000 Series Owner ’s Manual 73 I ndeX P panning 8 photos 16 POI data 18 pointer 8 port types 35 position 35 posn precision 36 precipitation 52 pressure center 55 pressure gradient 57 pressure.
.
.
F or the latest free software updates (excluding map data) thr oughout the life of your Garmin products , visit the Garmin W eb site at www .garmin.com. © 2007 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Garmin 5000 Series c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Garmin 5000 Series - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Garmin 5000 Series, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Garmin 5000 Series va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Garmin 5000 Series, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Garmin 5000 Series.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Garmin 5000 Series. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Garmin 5000 Series ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
