Manuel d'utilisation / d'entretien du produit H55MXV du fabricant Foxconn
Aller à la page of 72
H55MXV Series Motherboard User ’ s Manual.
Statement: This manual is the intellectual property of Foxconn, Inc. Although the information in this manual may be changed or modied at any time, Foxconn does not obligate itself to inform the user of these changes. T rademark: All trademarks are the property of their respective owners.
Declaration of conformity HON HAI PRECISION INDUSTRY COMP ANY L TD 66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT , T AIPEI HSIEN, T AIW AN, R.O.C. declares that the product Motherboard H55MXV is i.
Declaration of conformity T rade Name: FOXCONN Model Name: H55MXV Responsible Party: PCE Industry Inc. Address: 458 E. Lambert Rd. Fullerton, CA 92835 T elephone: 714-738-8868 Facsimile: 714-738-8838 .
Installation Precautions Please carefully read the following procedures to install your computer : ■ It is suggested to select high-quality , certied fans in order to avoid damage to the motherboard and CPU due to high temperature. Never turn on the computer if the CPU fan is not properly installed.
T ABLE OF CONTENTS Chapter 1 Product Introduction Product Specications .............................................................................. 2 Layout..........................................................................................
Online Update .................................................................................. 58 Congure ......................................................................................... 61 About & Help ..............................
Tha nk you for buyin g Foxc onn H55M XV Ser ies mothe rboar d. Foxco nn prod ucts are engi neered to maximiz e computi ng power , provid ing only what you need for break-through performance.
1 2 1-1 Product Specications CPU Support LGA 1 156 socket Intel ® CPU: Intel ® Core TM i7, Core TM i5 and Core TM i3 processors DM I Bu s F ul l du pl ex u p to 1 0G b/ s ea ch d ir ec ti on Chip.
1 3 6-channel Audio Ports Hardware Monitor System voltage detection CPU/System temperature detection CPU/System fan speed detection CPU/System overheating shutdown CPU/System fan speed control PCI Express x1 Support 250MB/s (500MB/s concurrent) bandwidth Low power consumption and power management features P CI Ex p re s s x 16 Ge n2 .
1 4 1-2 Layout Note : The above motherboard layout is for reference only , please refer to the physical motherboard for detail. 1. 4-pin A TX 12V Power Connector 2. SYS_F AN1 Header 3. PCI Express x16 Slot 4. PCI Express x1 Slot 5. PCI Slots 6. Front Audio Connector 7.
1 5 1-3 Back Panel Connectors 1. PS/2 Mouse Port Use the upper port (green) to connect a PS/2 mouse. 2. PS/2 Keyboard Port Use the lower port (purple) to connect a PS/2 keyboard. 3. Parallel Port This connector provides printer port interface. 4. VGA Port T o connect with external display devices, such as monitor or LCD display .
1 6 8. RJ-45 LAN Port The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate. LAN T ype Left: Active Right: Link Status Description Status Description 1000M Off No Link .
This chapter introduces the hardware installation process, including the installation of the CPU, memory , power supply , slots, pin headers and the mounting of jumpers.
8 2 8 2-1 Install the CPU and CPU Cooler Install the CPU Locate the alignment keys on the motherboard CPU socket and the notches on the CPU. Read the following guidelines before you begin to install the CPU : ■ Make sure that the motherboard supports the CPU.
9 2 9 Follow the steps to install the CPU onto the CPU socket : 2. Lift the metal cover on the CPU socket. 3. Remove protective socket cover . 5. W h e n CP U i s p ro p er l y se a t ed , replace the metal cover and push the CPU socket lever back to its locked position.
10 2 10 Install the CPU Cooler Follow the steps below to correctly install the CPU cooler on the motherboard. 1. Apply and spread an even thermal grease on the surface of CPU. 2. Place the four bolts of the CPU co oler to the ho les o f the mo the rbo ard, pus h them strai ght down from the top, and the bolts will be fastened on the motherboard.
1 1 2 1 1 2-2 Install the Memory Dual Channel Memory Conguration This motherboard provides two DDR3 memory sockets and supports Dual Channel T echnology .
12 2 12 Installing a Memory If you take a look at fron t side of mem ory mod ule, it has asymm etric pin cou nts on both sides sep arate d by a notch in the middle, so it can only t in one direction. Follow the steps below to correctly install your memory modules into the sockets.
13 2 13 2-3 Install an Expansion Card Follow the steps below to correctly install your expansion card in the expansion slot. 1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel. 2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
14 2 14 2-4 Install other Internal Connectors Power Connectors This motherboard uses an A TX power supply . In order not to damage any device, make sure all the devices have been installed properly before applying the power supply . 24-pin A TX Power Connector : PWR1 PWR1 is the A TX power supply connector.
15 2 15 Audio Connector : F_AUDIO The audio connector supports HD Audio standard. It provides the Front Audio output choice. S/PDIF OUT Connector : SPDIF_OUT The connector is used for S/PDIF output. USB Connectors : F_USB1_A/2_A/3_A In addition to the USB ports on the rear panel, this product also provides 10-pin USB headers on its motherboard.
16 2 16 TPM Connector : TPM The TPM (Trusted Platform Module) provides the ability to the PC to run applications more secure and to make tr an sa ct io ns an d c om mu ni ca ti on mo re tr u stw or th y . T o utilize this function, you should purchase additional device and install it.
17 2 17 Speaker Connector : SPEAKER The speaker connector is used to connect speaker of the chassis. Fan Connectors : CPU_F AN, SYS_F AN1 There are two main fan headers on this motherboard. The fan speed can be controlled and monitored in “PC Health Status” section of the BIOS Setup.
18 2 18 2-5 Jumpers For some featur es needed, user s can chang e the jumper sett ings on this moth erboard to modify them. This section explains how to use the various functions of this motherboard by changing the jumper settings. Users should read the following content carefully prior to modifying any jumper setting.
19 2 19 Intel ® ME Jumper: MFG This motherboard uses MFG jumper to enable or disable Intel ® Management Engine function. Intel ® Management Engine (ME) is an embedded microcontroller located in Intel chipset. It provides latest IT management features such as Intel ® AMT , that allows to improve management of corporate assets.
This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. Y ou have to run the Setup Program when the following cases occur : 1. An error message appears on the screen during the system Power On Self T est (POST) process.
3 21 Enter BIOS Setup The BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintain optimal system performance.
3 22 ► Power Management Setup All the items related with Green function features can be set up through this menu. ► PC Health Status This setup enables you to read/change Fan speeds, and displays temperatures and voltages of your CPU/System.
3 23 System Information This sub-menu is used to set up the standard BIOS features, such as the date, time, memory and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change the setting. ► System Time This item allows you to congure the desired time.
3 24 Model name of this product. ► BIOS V ersion It displays the current BIOS version. User can check this information and discuss with the eld service people if a BIOS upgrade is needed. ► Memory This item displays the current memory size. The size is depending on how many memory mod- ules were installed in your system before powering on.
3 25 Advanced BIOS Features CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Advanced BIOS Features Quiet Boot [Enabled Help Item Bootup Num-Lock [On] PCI Latency T imer [64] .
3 26 ► Intel VT -d Intel® Virtualization T echnology for Directed I/O (VT -d) can improve performance of I/O de- vices in virtualized environment. This item is used to enable/disable the VT -d feature. T rusted Computing CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
3 27 Fox Central Control Unit CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Fox Central Control Unit ► CPU Conguration Help Item Ratio Status: Unlocked (Min:09, Max:26) .
3 28 ► DRAM tWR (Write Recovery) This item allows you to select the write recovery time (in clock cycles). ► DRAM tRFC(Auto-Refresh-to-Active/Auto-Refresh Command Period) Refresh to Refresh or Refresh to Active command interval.
3 29 systems and applications in independent partitions or “containers.” One physical compute system can function as multiple “virtual” systems. V anderpool T echnology can help improve future virtualization solutions. This item will be displayed only when the CPU is supporting this feature and the setting is used to enable/disable it.
3 30 Enhanced Intel SpeedStep ® technology (EIST) allows the system to dynamically adjust processor voltage and core frequency , which can result in decreased average power consumption and decreased average heat production. There are some system require- ments must be met, including CPU, chipset, motherboard, BIOS and operation system.
3 31 Advanced Chipset Features CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Advanced Chipset Features IMC T ype : *Dale Family IMC Help Item Management Engine V ersion : 6.0.2.1 194 Memory Remap Feature [Enabled] PCI MMIO Allocation: 4GB T o 3328MB Initiate Graphic Adapter [PEG/PCI] SLP_S4# Min.
3 32 Integrated Peripherals CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Integrated Peripherals ► IDE Conguration [Press Enter] Help Item ► OnBoard Conguration [Press Enter] ► SuperIO Conguration [Press Enter] Congure the IDE ► USB Conguration [Press Enter] Device(s).
3 33 ► IDE Detect Time Out This item is used to select the time out value for detecting A T A/A T API devices. If the checking time is over the set value, the system will skip it. OnBoard Conguration CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
3 34 ► Serial Port1 Address This item is used to assign the I/O address and interrupt request(IRQ) for the onboard serial port1. ► Serial Port1 Mode This item is used to set the mode for the onboard serial port1. The available settings are: [Normal]: RS232 Mode.
3 35 This item allows you to enable support for OS without EHCI hand-off feature. This is a workaround for OS without EHCI hand-Off support . The EHCI ownership change should claim by EHCI driver . ► Legacy USB1.1 HC Support This item is used to enable the support for USB devices on legacy OS.
3 36 Power Management Setup CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Power Management Setup HPET Help Item ACPI Suspend T ype [S3 (STR)] Power On after Power Fail [Power.
3 37 ► HPET HPET stands for High Precision Even Timer . If you have the HPET disabled, then windows does not have access to it and therefore falls back to less accurate timing methods. This item is used to enable or disable the HPET Support. ► ACPI Suspend T ype This item is used to set the energy saving mode of the ACPI function.
3 38 PC Health Status CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. PC Health Status Warning T emperature [Disabled] Help Item Shutdown T emperature [Disabled] Case Open Warning [Disabled] CPU T emperature :32 o C/89 o F System T emperature :27 o C/80 o F CPU Fan Speed :2109 RPM System Fan Speed :N/A CPU Core :1.
3 39 BIOS Security Features CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. BIOS Security Features Security Settings Help Item Supervisor Password : Not Installed Install or change the User Password : Not Installed password.
3 40 Load Optimal Defaults Optimal defaults are the best settings of this motherboard. Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values. Select this option and press Enter , it will pop out a dialogue box to let you load the defaults.
The utility CD that came with the motherboard contains useful software and several utility drivers that enhance the motherboard features. This chapter includes the following information: ■ Utility C.
42 4 42 Utility CD content This mothe rboard comes with one Ut ility CD. Y ou can simpl y put it int o your CD/DVD-RO M driv e, and the main menu will be displayed on your PC screen to guide you how to install. 1. Install Driver Use these options to install all the drivers for your system.
43 4 43 Install driver and utility 1. Install Driver Y ou must click "Intel Chipset Driver" to install it rst. After that, you can click "One Click Setup" to install all the other drivers left, or you can click on each individual driver to install it manually .
44 4 44 FOX ONE FOX ONE is a powerful utility for easily modifying system settings. It also allows users to monitor various temperature values, voltage values, frequencies and fan speeds at any time.
45 4 45 1. Main Page T oolbar Use the toolbar to navigate to other pages. Alert Lamp When the system is in healthy state, the color of alert lamp is green. When the system is in abnormal state, the alert lamp color is red. Switch Button Click this button, it will simplify the whole FOX ONE control panel to a smaller information bar (i.
46 4 46 Skin Button There are more choices of FOX ONE screen panels. Click this button, you can select your favorite skin (FOX ONE Panel). Exit Click this button to exit the program. Minimum Click this button to drop the FOX ONE to Windows system tray located at the lower right corner of your screen.
47 4 47 Conguration This menu allows you to congure : 1). Monitor interval (ms) : This is to dene the interval of different messages of system settings which are to be displayed on Simple Mode screen. Minimum value is 1 second. 2). Simple Mode : T o select which message of system settings are to be displayed in the Simple Mode.
48 4 48 Step 1 : Click Calibration icon, a message pops out to ask for continue. Select Y es. Step 2 : After data is collected, it will ask you to restart your computer now .
49 4 49 2. CPU Page - CPU Control This page lets you select (or overclock) CPU clock to meet the current performance level of the system. The fastest and suitable CPU clock running for current system can be calculated by FOX ONE automatically or manually input by yourselves.
50 4 50 Y ou can see the system is raising CPU clock until the system hangs. Push RESET button on the front panel of your system to restart the computer . Run FOX ONE program again, it will inform you the previous test found that 255MHz is the recommended CPU clock for your system.
51 4 51 FOX Intelligent Stepping (F .I.S., Optional) Select FOX Intelligent Stepping will allow your system to automatically adjust your CPU clock rate based on different system loadings. For example, if you select Power Gaming, CPU clock will be driven to run at its maximum speed.
52 4 52 4. Limit Setting 4.1 Limit Setting - CPU T emperature This page lets you to set CPU high limit temperature and enable the alert function. 4.2 Limit Setting - System T emperature This page lets you to set system high limit temperature and enable the alert function.
53 4 53 4.3 Limit Setting - CPU Fan This page lets you to set CPU fan low limit rpm and enable the alert function. 4.4 Limit Setting - System Fan This page lets you to set system fan low limit rpm and enable the alert function.
54 4 54 4.5 Limit Setting - F AN1 Fan This page lets you to set F AN1 fan low limit rpm and enable the alert function. 5. V oltage Page - V oltage Control (Optional) This page lets you set CPU voltage, memory voltage and North Bridge voltage manually .
55 4 55 6. Fan Page - Fan Control This page lets you enable Smart Fan function or set the fan speed by manual. When Smart Fan is selected, you must use a 4-pin CPU cooler in your system.
56 4 56 FOX LiveUpdate FOX LiveUpdate is a useful utility to backup and update your system BIOS, drivers and utilities by local or online. Supporting Operating Systems : ■ Windows 2000 ■ Windows X.
57 4 57 1-2 Local Update - Backup This page can backup your system BIOS. Y ou can click “Backup”, and key in a le name, then click “Save” to nish the backup operation. The extension of this backup le is ".BIN" for Award BIOS and ".
58 4 58 2. Online Update 2-1 Online Update - Update BIOS This page lets you update your system BIOS from Internet. Click “start”, it will search the new BIOS from Internet. Then follow the wizard to nish the update operation. 2-2 Online Update - Update Driver This page lets you update your system drivers from Internet.
59 4 59 2-3 Online Update - Update Utility This page lets you update utilities from Internet. Click “start”, it will search the new utilities from Internet.
60 4 60 2-4 Online Update - Update All This page lets you update your system drivers from Internet. Click “start”, it will search all new BIOS/drivers/utilities from Internet.
61 4 61 3. Congure 3-1 Congure - option This page lets you set auto search options. After you enable the auto search function, FOX LiveUpdate will start its searching from Internet and if any qualied item found, it will pop out a message on the task bar to inform you to do the next step.
62 4 62 When you enable "Auto Search FOX LiveUpdate", if your FOX LiveUpdate version is older , it will auto search from internet and prompt you to install the new version. 3-2 Congure - System This page lets you set the backup BIOS location and change different skin of the FOX LiveUpdate utility .
63 4 63 3-3 Congure - Advance This page lets you select to ash BIOS / Boot Block and clear CMOS. If you choose Flash Boot Block, it means BIOS is not protective, and you must make sure the ash process is continuous and without any interruption.
64 4 64 FOX LOGO FOX LOGO is a simple and useful utility to backup, change and delete the boot time Logo. The boot Logo is the image that appears on screen during POST (Power-On Self-T est). Y ou can prepare a JPG image (1024x768) le, then use FOX LOGO to open it and change the boot time Logo.
65 4 65 FOX DMI FOX DMI is a full Desktop Management Interface viewer , and it provides three DMI data formats : Report, Data Fields and Memory Dump. Users can easily switch between the T abCtrl. With DMI information, system maker can easily analyze and troubleshoot your motherboard if there is any problem occurred.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Foxconn H55MXV c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Foxconn H55MXV - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Foxconn H55MXV, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Foxconn H55MXV va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Foxconn H55MXV, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Foxconn H55MXV.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Foxconn H55MXV. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Foxconn H55MXV ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
