Manuel d'utilisation / d'entretien du produit N5100-7v19/96 du fabricant First Alert
Aller à la page of 44
FAllOC Security System N5100-7v19/96 Previous.
TABLE OF CONTENTS SYSTEM OVERVlEW ....................................................................................................................................... 4 Keypads .......................................................................
(continued) TABLE OF CONTENTS USlNGME KEYSWITCH ................................................................................................................................ 21 CHIME MODE (using the BCHIME Key) .....................................
SYSTEM OVERVIEW General Congratulations on your ownership of a First Alert Professionat Security System. You’ve made a wise decision in choosing it, for it represents the latest in security protecti.
(continued) SYSTEM OVERVIEW Alarms When an alarm occurs, both the keypad and external sounders will sound, and a message at the keypad will identify the zone(s) causing the alarm. In addition, if your system is connected to a central monitoring station, an alarm message will be sent.
Keypad Types Keypad Styles dures in this man- ual apply equally to all keypad types and sty/es. ABOUT THE KEYPADS All commands and procedures described herein are illustrated for Fixed- Word Display k.
SUMMARY OF SYSTEM STATUS DISPLAYS AWAY STAY INSTANT BYPASS NOT READY READY NO AC AC CHIME BAT ALARM CHECK FIRE tkbut;y zones, interior & perimeter, . Perimeter burglary zones, such as windows and doors are armed. Perimeter burglary zones armed and entry delay is turned off.
SUMMARY OF KEYPAD FUNCTIONS 1. DISPLAY WINDOW: Displays protection zone ID and system status messages. OFF KEY: Disarms burglary portion of the 9. system, silences alarms and audible trouble indicators, and clears visual display after ,Q problem’s correction.
15. ARMED INDICATOR: (RED) Lit when the s stem AWA Y has been armed (STAY, , INSTANT or MAXIMUM). 16. INTERNAL SOUNDER: The built-in keypad sounder mimics the alarm sounder during alarms, and will also “beep’ during certain system functions. (see SUMMARY OF AUDIBLE/ VISUAL NOTIFEATION).
SECURITY CODES General At the time of installation, your installer programmed a personal four-digit Master code, known only to you and yours. This code is used to perform most system functions, including arming and d&arming of the system.
(continued) SECURITY CODES To Assign, Change, 1. Enter your Master code and press the CODE key. Or Delete User Codes 2. Enter single-digit user number (2 - 7) for which a code is to be assigned, changed, or deleted. 3. If assigning or changing a user’s code, enter the desired 4digit code for use by that User Number.
ENTRY/EXIT DELAYS General hformation Your system has preset time delays, known as exit delay and entry delay. When you arm your system, exit delay gives ou time to leave through the entry/exit door without setting off an alarm. Y nttj delay gives you time to disarm the system when you reenter through the entry/exit door.
CHECKING FOR OPEN ZONES Using the cl +k READY Key Before your system can be armed, all protected doors, windows and .o.ther protection zones must be closed or bypassed (see BYPASSING PROTECT/ON ZONES section), otherwise the keypad will display a ‘Not Ready” message, and if your keypad has a READY indicator light, it will not be lit.
BYPASSING PROTECTION ZONES Using the This key is used when you want to arm your system with one or more 0 3 BYPASS Key zones intentiOnaily Unprotected. The system must be disarmed first. j. Enter your security code and press the BYPASS key. 2. Enter zone number(s) for the zone(s) to be bypassed.
(continued) BYPASSiNG PROTECTlON ZONES Quick Bypass If your s stem supports ‘Quick Bypass’, it allows you to easily bypass all open faulted) zones without having to enter zone numbers individually. r ‘Quick Bypass’ is active for your To use this feature, enter your security code, press the BYPASS key, system, and if so, then stop.
Using the ARIWNG PERIMETER ONLY WRN ENTRY DELAY ON Use thii key when you are staying inside, but expect someone to use an entry/exit door later. 1. Enter your security code and press the STAY key. 2. The keypad beeps three times and displays the armed message.
ARMING PERIMETER ONLY WITH ENTRY DELAY OFF Using the Use this key when you are staying inside and do not expect anyone to use an entry/exit door. 1. Enter your security code and press the INSTANT key. 2. The keypad beeps three times and displays the armed message.
ARMING ALL PROTECTION WfTH ENTRY DELAY ON Using the Use this key when no one will be staying inside. MAWAY Key 1. Enter your security code and press the AWAY key.
ARMfNG ALL PROTECTION WITH ENTRY DELAY OFF Using the Use this key when the premises will be vacant for extended @MAXIMUM ~~~ periods ?f time such as vacations, etc., or when retiring for the night and no one mll be moving through protected interior areas.
DISARMING THE SYSTEM AND SILENCING ALARMS Using the The OFF key is used to disarm the system and to silence alan and HOFF Key trouble sounds. U IMPORTANT: ff you return and the main burglary sounder is on: DOf4OTENTERbkJt CONTACTTHE POLICE fromanearhysafelocatfon.
USING THE KEYSWITCH General Your system may be equipped with a keyswitch for use when arming and disarming. A single red light on the keyswitch plate indicates the status of your system as follows: OF.
CHIME MODE Using the Your system can be set to alert you to the opening of a door or window while it is disarmed by using CHIME mode. When activated, three tones will sound at the keypad whenever a protected door or window is opened. Pressing the READY key will display the open points.
(continued) PANIC KEYS THESE KEYS NOT PRESENT ON ALL KEYPADS - a(B) E3c > _ LElTERED PANIC KEYS (T IS NOT USED) TYPICAL KEYPAD SEE YOUR lNSTALLER AND NOTE HERE THE KEY(S) & FUNCTlON(S) PRDGRAMMED FOR YOUR SYSTEM > PANIC KEYS FllNI?tlnN 0 Ill a WI SlLENTEMERGENCY(Fbd-Ftirctim) cl I 95 [*I a [#I -sILpcT,-LuxBLE 07 0.
TESTING THE SYSTEM TO BE CONDUCIED WEEKLY q Using the The TFST key puts your system into Test mode, which allows each s TEST Key protection pofnt to be checked for proper operation.
(continued) TESTING THE SYSTEM 6. 7. 8. Follow the manufacturer’s instructions to test all smoke detectors, to ensure that all are functioning properly.
TROUi3LE CONDITIONS %heck” and “Battery” Displays The word CHECK on the keypad’s display, accompanied by a ‘beeping’ at the keypad, indicates a trouble condition rn the system. To silence the beeping for these conditions, press any key. 1.
(continued) Power Failure TROUBLE CONDITIONS If there is no keypad display at all, and the POWER indicator (if present) is not lit, operating power for the system has stopped and the system is inoperative.
General In Case Of Fire Alarm FIRE ALARM SYSTEM IF INSTALLED Your fire alarm system (if installed) is on 24 hours a day, for continuous protection. In the event of an emergency, the strategically located smoke and heat detectors will automatically send signals to your system, triggering a loud, interrupted sound from the keypad.
(continued) FIRE ALARM SYSTEM Silencing Fire Alarms 1. 2. 3. 4. IF INSTALLED Silence the alarm by pressing the OFF key (security code not needed to silence fire alarms). To dear the display, enter your code and press the Off key again (Memory of Alarm).
NATIONAL FIRE PROTECTION ASSOClATlON RECOMMENDATIONS ON SMOKE DETECTORS General With regard to the number and placement of smoke/heat detectors, we subs&e to the recommendations contained in the National Fire Protection ‘Association’s Standard #74 noted below.
EMERGENCY EVACUATION Steps to Safety clcl 18 Cl 0 Establish and regularly practice a plan of escape in the event of fire. The following .steps are recommended by the National Fire Protection Asso- CiZltiOn: 1. 2. 3. 4. 5. 6. 7. 6. Plan on your detector or your interior and/or exterior sounders warning all occupants.
QUICK GUIDE TO ALARM SYSTEM FUNCTIONS FUNCTION PROCEDURE 1 COMMENTS awckzoms RessFEADYkey. Toviewfa&dzoneswhensystemnctmady. -w-n l%WCOdS.Ressarmingkeydasired: Afrnssystemhmodeseleded. (AWAY, STAY, INSTANT, hbWMUtd) au&kAwn PfWS#. P@SSarmirgb~desbed: Annssyemlnmode~~andwilhouluseofcode.
SUMMARY OF AUDIBLEAIISUAL NOTIFICATION SOUND CAUSE LOUD, INTERRUPTEDt FIRE ALARM i<grpada- LOUD, CONTfNUOUSt BURGLARY/AUDIBLE Keypad&f EMERGENCY ALARM DISPLAY AREandALARhlaredispqed;protectionzon3inalalmisdisptayed. ALARM isdisphyd; pll3t~zoneinaiafmisalsocrsplayed.
PROTECTION ZONES LIST One or more sensing devices may have been assigned by the installer of your alarm system to the various protection zones in your system (although nol evew zone number may have been used).
fi F- Ad!s OWNER’S INSURANCE PREMIUM %- CREDIT REQUEST hi form should be completed and forwarded to your lwmmwm% Insurance carrier for possible premium credii L. GENERAL INFORMATION: insured’s Name and Address: Insurance Company: First Alert System: PA1 1 OC Poiii No.
OWNER’S INSURANCE PREMIUM CREDIT REQUEST (cont.) i. SMOKE DETECTOR LOCATIONS: cl Furnace Room cl Kitchen Cl Bedrooms cl Attic cl Basement cl Living Room cl Dining Room 0 Hall :.
CANADIAN DEPARTMENT OF COMMUNICATIONS (DOC) STATEMENT NOTICE The callad+ Dew of communications label identifies -~~fggggyJ t Tfliscertftlcetiorlnleanstflattheequipmfmt ecommunicatiwsnetworkprote&e.
UL NOTICE: This is a “Grade A@’ Residential System. FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 15 STATEMENT Thii equipment has been tested to FCC requirements and has been found acceptable for use.
bontinued) FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 68 STATEMENT If thii equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary dis- continuance of service may be required. If advance notice is not practical, the telephone company will notii the customer as soon as possible.
L WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM 2~2 system is an advanced design securfty syst?m, it do$.s not ofrer guaranteed protection a P .‘nst burglary or fire ?r T Any alarm system, whether commerual or resrdentral, ts subject to compronuse or allure to warn for a van- ety of reasons.
(continued) WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM l Alarm warning devices such as sirens, bells or horns may not alert paople or wake up sleepers if they are located on the other side of dosed or partly open doors. If warning devices sound on a different level of tha residence from the bedrooms.
Notes -42-.
Notes -43-.
ONE YEAR LIMITED WARRANTY Pittway Corporation, and its divisions, subsidiaries and affiliates (“Seller’ , warrants rts Frmt -Alert security equi from date of ongmal purchase, CP ment (the ‘product’) to be free from t 165 Eileen Way, Syosset.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté First Alert N5100-7v19/96 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du First Alert N5100-7v19/96 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation First Alert N5100-7v19/96, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le First Alert N5100-7v19/96 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le First Alert N5100-7v19/96, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du First Alert N5100-7v19/96.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le First Alert N5100-7v19/96. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei First Alert N5100-7v19/96 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
