Manuel d'utilisation / d'entretien du produit CV-153 du fabricant Eltax
Aller à la page of 40
Instruction M anual DV - 25 1 DVD -P layer DV - 1 53 DVD - Playe r DV - 25 2 DVD -P layer.
Content 2 Content 2 Safety Precautions 3 Important Safety Instructions 4 Caution 6 Features 7 Front and Rear Panel 8 Connection to a TV Set 9 Connection to an Analog A V Receiver 10 Connection a Digit.
Safety Precautions 3 TO MINIMISE THE RISK OF FIRE AND ELECTRIC SHOCK,DO NOT EXPOSE DEVICE TO RAIN OR MOISTURE. DO NOT OPEN THE HOUSING AS IT CONT AINS DANGEROUS VOL T AGE.
Important Safety Instructions 4 W ARNING: IT IS IMPORT ANT THA T YOU STUDY AND OBSER VE BOTH THE INSTRUCTIONS IN THIS MANUAL AND THE INSTRUCTIONS ON THE DEVICE. KEEP THIS MANUAL FOR FUTURE USE. THE HOUSING MUST NOT BE REMOVED. RISK OF DANGEROUS VOL T AGE.
Important Safety Instructions 5 Discs Do not use scratched, deformed or repaired discs. Such discs will break easily and may cause serious injury and damage to the device. Service Do not attempt to carry out any service work yourself. By opening or removing the housing, you will be exposed to dangerous voltage, etc.
Caution 6 Handling instructions The DVD player's top and back panel may become warm after prolonged use. This is not due to a defect. When the DVD player is not used, remove the disc and turn off the device. If the DVD player is not used for a long period, its function may deteriorate.
! ! ! Full compatibility with DIVX(MPEG4),DVD, CD, MP3, Kodak Picture CD, CD- R a n d C D - RW (finalized) Multiple playback modes: Program, Search Coaxial digital audio output S-video, composite vide.
1 2 3 4 5 6 7 8 9 11 1 2 3 4 5 6 7 8 9 10 POWER DISPLA Y IR RECEIVER IR RECEIVER DVD TRA Y OPEN/CLOSE BUTTON OPEN/CLOSE BUTTON PLA Y/P AUSE BUTTON PLA Y/P AUSE BUTTON STOP BUTT ON PREV BUTTON PREV BUTTON NEXT BUTTON CARD READER (Only in DV -252) CARD READER (Only in DV -252) 1 2 3 4 5 6 1 2 3 4 5 6 5.
SCART input Connecting to a TV set 9 NOTE: There are 4 ways of connecting the DVD player to a TV set: Use a Scart cable Use a S-VIDEO cable along with the stereo RCA outputs (Remember to set the video.
Note: 1. Set the TV to the A V input connected to the DVD player . 2. Set the Amplifier to the A V input connected to the DVD player . Remember to set the DOWNMIX settings to 5.
BASS TREBLE ECHO DOWN UP VOLUME INPUT SELECTOR MUTE KARAOKE CHANNEL TEST MODE 3STEREO PROLOGIC BYPASS EXCITE POWER MIC 2 1 1 MICVOL 2 MIC Notes: Raw PCM 1. Set the SPDIF Audio out to or in the DVD players setup menu 2. Set the digital Amplifier to the coaixial input connected to the DVD player .
Point the remote control at the remote sensor . Remarks: Do not expose the remote sensor of the DVD Player to a strong light source, such as direct sunlight. 2. Insert batteries. 1. Open the cover . 3. Close the cover . Make sure to match the "+" and "-" of the batteries with the marks inside the battery compartment.
AUDIO DECREASE VOLUME OPEN/CLOSE INCREASE VOLUME MENU PLA Y/P AUSE NEXT ANGLE GOTO PREVIOUS A-B VIDEO MODE REPEA T ENTER SUBTITLE STOP TITLE L/R MUTE DISPLA Y F AST FORW ARD 0-10+ DIGITS F AST REVERSE.
DISPLAY 1 ENTER 10+ 2 3 4 56 789 0 POWER OPEN/CLOSE AUDIO SUBTITLE TITLE ANGLE VOL STOP PLAY MENU SETUP GOTO TIME REV PREV NEXT ZOOM REPEAT A-B RETURN PROG P/N PBC DIGEST L/R MUTE MODE PSCAN/ NORMAL S.
RETURN During DVD or CD playback press corel hold slow . The player will review the disc at 1/2,1/3,1/4,1/5,1/6,1/7 times normal speed at follows. Slow SF 1/2 1/3 1/4 1/5 1/6 1/7 play During DVD or CD playback press RETURN. The player will return to the menu.
Press the MODE button to change the Video Output .There are 4 different outputs INTERLACE-YUV ,P-SCAN YPbPr ,TV -RGB, S-VIDEO. When you have selected the incorrect output your screen will go blank. Continue to hit the Mode button to retrieve the correct connection.
Q2 Q3 Q4 Q1/2 Q1/3 Q1/4 QOFF P/N DIGEST During playback press P/N to select P AL, AUTO, NTSL. During playback press DIGEST to display picture (This function is only available on VCD.) VOL+ VOL- VOL+ VOL- Press V olume < VOL+> button to increase V olume.
PROG PSCAN/NORMAL When [PROGRAM] is on, press ENTER to display the [Program] submenu: CD Others Program Input 1__ 4__ 7__ 10__ 2__ 5__ 8__ 1 1__ 3__ 6__ 9__ 12__ Play Program Clear All DVD Program Inp.
T otal title T otal Chapter Language Audio type Subtitle Angle During playback,press TIME to show the TIME SEARCH menu . Press DISPLA Y to show the Audio and Subtitle message menu. During playback,press DISPLA Y to show the current time counter position.
Remain play time Press again to show the remain play time Ti m e . GOTO During playback,press GOTO show the current time counter position. Enter number to choose the title Enter number to choose the Play time. T otal Chapter T otal title T otal Chapter Enter number to choose the Chapter .
1. General Steps of setup menu A) Press the setup button, the main setup menu appears. B) Press the Left and Right arrow buttons to highlight the icon of the desired page, then press the Down or Right.
2. Setup Items Introduction 2.1 SYSTEM SETUP The system setup options are illustrated below: A) Press the Arrow buttons to highlight the Exit Setup option,then press Enter or Setup again to exit Setup Menu . 2.1.1 SOURCE There are 2 kinds of sources illustrated below .
2.1.2 TV SYSTEM 2.1.3 VIDEO According to the output jack of TV set, you can chooseS-VIDEO, YUV ,RGB, P-SCAN YPBPR. According to the Color System of the TV , you can choose the TV System. Note: NTSC is primarily used in the United States Note: Only choose PSCAN if your DVD player is connected to a Progressive scan TV with Y , Pb, Pr cables.
2.1.4 TV TYPE According to the TV type,you can choose 16:9,4:3LB or 4:3PS. 2.1.5 P ASSWORD The password option is initialized locked, and you can not set the ratings limit or change the password. In order for the Ratings feature to work, the password mode must be turned on.
2.1.6 RA TING 2.2 LANGUAGE SETUP 2.2.1 OSD LANGUAGE 2.1.7 DEF AUL T The DEF AUL T setup options are RESTORE factory setup. Let your player work on best state.
Highlight the SUBTITLE LANG option, and press the Arrow buttons to choose the subtitle language you prefer . Press Enter to confirm. If the disc you are playing has that language available, it will displays subtitles in that language.
2.3 AUDIO SETUP The audio setup options are illustrated below: 2.3.2 KEY Use the Up and Down arrow button to move the scroll and adjust the key . Notes: If your preferred language is not availabel, the disc s default language will be played. Highlight the AUDIO OUT option, and press the Arrow buttons to choose the audiooutput mode you prefer .
2.4 VIDEO SETUP The video setup options are illustrated below: 2.4.1 BRIGHTNESS Use the Up and Down arrow buttons to move the scroll and adjust the brightness 2.
2.4.2 CONTRAST Use the Up and Down arrow buttons to move the scroll and adjust the contrast. Use the Up and Down arrow buttons to move the scroll and adjust the hue. 2.4.3 HUE 2.4.4 SA TURA TION Use the Up and Down arrow buttons to move the scroll and adjust the saturation.
2.5 SPEAKER SETUP The speaker setup options are illustrated below: 2.5.1 DOWNMIX A) L T / R T Choose this setting when you are connected to a 2 Channel Analog Audio Input. B) STEREO Choose this setting when the DVD player is connected to a TV or therefore modulator .
2.5.3 BASS MODE There are T wo settings in this option: ALL LG SPK and ALL SM SPK 2.5.4 CENTER Y ou can adjust the center by using the Up and Down buttons to move the scroll the scroll bar .
2.6 DIGIT AL SETUP The DIGIT AL SETUP options are illustrated below: 2.5.5 REAR DELA Y Y ou can adjust the Center and the Rear delay by using the Up and Down buttons to move the scroll bar .
2.6.2 DUAL MONO (LEFT + RIGHT) Choose to setup the L and R mono output mode. There are four modes in this option: STEREO, MONO L, MONO R,and MIX MONO. 1. T o protect your DVD player , the interval between turning the unit on and off, via the Main Power button, should be more than 30 seconds.
Press to select the file when the cursor appears in the file window .Press select to play the current file select by the cursor . Press to switch between the directory window and the file window . During Mp3 playback, Forward Scan and Reverse Scan are not available.
USB input Card reader This unit have a USB jack,when no disc in the player , you can insert a USB DISC or a Mp3 Player with USB Interface to play the Mp3 music and JPEG files. See the instructions on the previous side. All the operating functions are the same as playing JPEG- or Mp3 discs.
Playing a JPEG file 36 1. When a JPEG disc is loaded in the DVD-player , an automatic slide show will be launched. Each picture will be displayed and scaled to fit the screen. Press STOP to enter the file library . Use the SCROLL key to navigate the pictures, and press PLA Y to display a picture.
T roubleshooting 37 This troubleshooting guide may help you find a possible cause of and solution to a problem. If there are still problems, please contact the local service centre or distributor . Common sympton Possible cause Remedy i No function Mains power is not connected Connect to mains power outlet Power is OFF T urn the power ON.
Power requirements: AC 100-240 V olt, 50/60Hz Power consumption: 15W Video standard: NTSC/P AL/AUTO Unit Weight: 1.4kg Video out: 1.0V(p-p)/75 , sync, negative polarity , RCA pin jack x 1 S-video output connector(separate Y¡C signal output connector): Y output: 1.
39 Power requirements: AC 100-240 V olt, 50/60Hz Power consumption: 15W Video standard: NTSC/P AL/AUTO Unit Weight: 2,1kg) Video out: 1.0V(p-p)/75 , sync, negative polarity , RCA pin jack x 1 S-video output connector(separate Y¡C signal output connector): Y output: 1.
For further information please visit our website: www .elta x .c om Item no. 40177.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Eltax CV-153 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Eltax CV-153 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Eltax CV-153, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Eltax CV-153 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Eltax CV-153, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Eltax CV-153.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Eltax CV-153. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Eltax CV-153 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
