Manuel d'utilisation / d'entretien du produit AVN7000 du fabricant Eclipse - Fujitsu Ten
Aller à la page of 20
Be sure to read this installation manual thoroughly prior to installation and making connections. If installation methods or non-standard parts not specified in this installation manual are used, accidents or injury may result. Professional installation is recommended, contact the place of purchase to schedule an appointment.
- 2 - Components Components Check that all of the following components are present Check that all of the following components are present GPS antenna components GPS antenna x 1 14 Waterproof cushion x.
- 3 - Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the AVN7000. They show safe and correct ways to handle the product to prevent personal injury to you and others and avoid damage to property.
- 4 - • • When routing cables, use precautions to prevent contact of sharp metal parts such as brackets or screw tips. Otherwise, a short circuit, electric shock, fire, or accident may result. • • Play the audio at a moderate volume level that permits you to hear sounds from outside the vehicle.
- 5 - Installation Diag Installation Diag r r am am GPS antenna (When installing inside the vehicle) 14 GPS antenna (When installing outside the vehicle) 14 • • If installing the GPS antenna inside the vehicle, the location and the slope of the vehicle's windshield will determine the accuracy of the GPS antenna to receive the GPS signal.
- 6 - • • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result. • • The cables should be secured with tape or a similar securing method to prevent any obstructions while driving.
- 7 - B+ (Yellow) Connect where power is constantly available, regardless of the ignition key's position. ACC (Red) Connect where the power comes on when the ignition is in the ACC position. Illumination power supply (Orange/White) Connect to where power comes on when the vehicle light switch is turned on.
- 8 - NAVI-VOICE output terminal Connect to the NAVI-VOICE input terminal of an external device such as a DCU105 (sold separately). Digital output terminal Connect to the digital input terminal of an external device such as a DCU105 (sold separately).
- 9 - Vehicle component adapter cable Vehicle harness From main unit - Example of using vehicle adapter cables - - V ehicle connections - • • You will need to purchase the necessary component adapter cable for the vehicle so that the power supplies can be utilized.
- 10 - Notes on installation • • Check the vehicle speed pulse signal, parking brake signal, and reverse signal carefully before making the connections. If the cables are incorrectly connected, accidents or problems with correct operation may result.
Route the parking brake signal cable to the main unit. - 11 - Foot-operated Parking brake Hand-operated Parking brake - A connecting the point for parking brake (example) - Attach a splicing connector at this location.
- 12 - MAIN UNIT 1 16P GPS ANTENNA TO GROUND TO ACC (Power Supply) Red TO HEAD LIGHT SWITCH (Illumination (+) ) Orange/White TO POWER ANTENNA RELAY (Supply) Blue TO TURN-ON LEAD OF EACH UNIT (Supply) .
- 13 - TO GROUND GROUND CABLE (supplied with TVR105) TV ANTENNA (supplied with TVR105) TV ANTENNA (supplied with TVR105) TO GROUND 5P 12P 5P 6P FROM EXTERNAL VIDEO EQUIPMENT (remove cap when using ext.
- 14 - System connection e System connection e xample xample MAIN UNIT 1 BEC105 (sold separately) NO CONNECTION (Do not remove cap) 16P GPS ANTENNA TO GROUND TO ACC (Power Supply) Red TO HEAD LIGHT SW.
- 15 - TO GROUND GROUND CABLE TV ANTENNA (supplied with TVR105) TV ANTENNA (supplied with TVR105) TO GROUND 5P 12P 5P 6P FROM EXTERNAL VIDEO EQUIPMENT (remove cap when using extenal VIDEO EQUIPMENT) T.
- 16 - Tip Installing the GPS antenna Installing the GPS antenna Notes on installation • • Do not install the antenna in places (such as front pillars and roof panel) that are shielded from the sky.
- 17 - - Installation inside the vehicle (example) - Choose an installation location on the dashboard which is flat and has a clear view of the sky. 1 Install the ground plate to the dashboard. 2 Install the GPS antenna to the ground plate. 3 Ground plate 16 Secure the GPS antenna cable with clamps.
- 18 - - Installation outside the vehicle (example) - Choose an installation location where the GPS antenna can be attached securely. 1 Remove the backing paper from the body protective sheet and attach the sheet to the vehicle. 2 Install the GPS antenna on top of the body protective sheet.
- 19 - Installing the main unit Installing the main unit 30˚ or less Level (reference) Front - Installation angle - Caution label Caution - Installation preparation - To maintain proper function, the unit must be mounted less than 30 degrees.
- 20 - 090003-28540700 0508DE (CN) “ECLIPSE” is a registered trademark of FUJITSU TEN LIMITED in 48 countries including the U.S. and Japan. Remove the pocket and any other accessories from the center cluster to make room for the main unit. 1 Remove the mounting brackets for the pocket.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Eclipse - Fujitsu Ten AVN7000 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Eclipse - Fujitsu Ten AVN7000 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Eclipse - Fujitsu Ten AVN7000, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Eclipse - Fujitsu Ten AVN7000 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Eclipse - Fujitsu Ten AVN7000, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Eclipse - Fujitsu Ten AVN7000.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Eclipse - Fujitsu Ten AVN7000. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Eclipse - Fujitsu Ten AVN7000 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.