Manuel d'utilisation / d'entretien du produit MP NOVA4 DT du fabricant Datamax
Aller à la page of 60
User M a nu a l MP Nova Di rect T h ermal T h ermal T ran sfer M P No v a4 DT M P N ov a4 TT M P No v a6 DT M P N ov a6 TT M P No v a8 DT.
Table of Contents User M a nu a l 1. Int rod uct ion 2. Sa fe ty 3. P rod uct P rese nta t io n 4. P rod uct Ov e rv i ew 4.1 I n t he B o x 4.2 P ri n ter P arts M P No va4, 6 & 8 DT 4.3 Open i n g an d Cl o s in g th e C over of MP N o va4 , 6 & 8 D T 4.
1. Introduction Cond it i o ns © Co py righ t D atam a x Co rpo rati o n 20 06 T h e M P No v a prin t ers w it h t heir uni q u e tec hn o l o gy h av e bee n d eve lo ped to o ff er a range o f diff eren t a pp licati o n s. T h a n k yo u f o r ch o osi n g an D atam ax pri n t er fo r yo u r bu si ness n e eds.
2. Safety S a f e ty & C e rt if ic at io n S afet y Requi r ement s Dat ama x di sc lai ms a l l res po n sibi l i ty r egar di n g t he CE direct ive i f th e p r i n t e r i s u s e d , al te r e d or i n s tall e d i n an y w a y oth e r t h an descri bed i n t h i s m a nu a l.
2. Safety S a f e ty & C e rt if ic at io n • T h e p ri n ter s h o uld be co nnecte d t o the po w e r s u p pl y in di ca ted o n t h e vo l tage p l ate. If yo u are uns u re o f th e type o f po w er s upp l y avai la ble, p le ase co n t ac t Data ma x serv ice pe rs o nnel.
2. Safety S a f e ty & C e rt if ic at io n M achi ne S i gn Cer t ifi cati on and Appr ov al s.
2. Safety S a f e ty & C e rt if ic at io n T h e M P No v a prin t ers a re ce rti f ied in acco rda n ce w i th th e r equ ir em en t s for CE m a rk in g .
3. Product Presentation Th e M P N ova Se ri es Dat ama x ac hi eves div e rsit y w i t h i ts t herm a l pri n t ers , t he M P seri es. P o w erf ul a n d i nte l l ige n t w it h a m ult it u de o f f un cti o n a lity y ou w o u l d n ot ex pe c t fr om on e of t h e s m al l e st p r in te r s o n th e marke t.
4. Product Overview 4.1 In t he B o x M P N ov a4 DT & M P N ova6 DT T h e f o l lo w i ng i tems s h o ul d be i n c l u d ed i n t he bo x whe n yo u rec ei ve yo u r n e w M P N o va4 DT o r MP No v a6 D T prin t er: 1. 1 x M P No va4 D T o r M P N o v a6 DT 2.
4. Product Overview 4.1 In t he B o x M P N ov a4 T T & M P Nov a6 T T T h e f o l lo w i ng i tems s h o ul d be i n c l u d ed i n t he bo x whe n yo u rec ei ve yo u r n e w M P N o va4 T T o r M P N o va6 T T pri n ter: 1. 1 x M P No va4 TT o r M P N o v a6 TT 2.
4. Product Overview 4.1 In t he B o x M P N ov a8 DT T h e f o l lo w i ng i tems s h o ul d be i n c l u d ed i n t he bo x whe n yo u rec ei ve yo u r n e w M P No va 8 DT prin t e r: 1. 1 x M P No va8 D T 2. 1 x Cl e an in g c l oth 3. 1 x C o mm un i cati o n cab l e (S eria l RS 232 ) 4.
4. Product Overview 4.2 MP No v a4 , 6 & 8 D T – Pr i n te r P art s 1. P rin t b u tto n 2. S tatu s lamp (LE D ) 3. Co ver 4. M edi a ro l l 5. Ro l l st eeri n g 6. R o l l g u i de l o ck 7. M edi a trac k 8. H and l e 9. C o mmun i ca ti o n po rts 10.
4. Product Overview 4.2 MP No v a4 , 6 & 8 D T – Pr i n te r P art s 15. P rin t head 16. P rin t ro ll 17. Me d ia Pos i t i on i n g S en s or (M PS) 18.
4. Product Overview 4.3 Ope ning a nd C lo sin g t h e C o ver O pen M P N ova4, 6 & 8 DT 1. Pu ll h andl e . 2. Open co ver ..
4. Product Overview 4.3 Ope ning a nd C lo sin g t h e C o ver Cl os e M P N ova4, 6 & 8 DT 1. Cl o se co ve r. 2. F o l d ha n d l e . ( P r i nt he a d w i ll be e n g aged. ) No te: M a k e s ure t he h a nd l e is fo l ded a ll t he w ay do wn.
4. Product Overview 4.4 MP No v a4 & 6 T T – Pr in t er Part s 1. Prin t b u tto n 2. S tatu s l amp (LED ) 3. Fr o n t co ver 4. Rear co ver 5. M edia ro ll 6. Ro ll g u i de lo ck 7. Ro l l ste er i n g 8. M edia trac k 9. H and l e 10. Ink ribbo n g u i d e 11.
4. Product Overview 4.4 MP No v a4 & 6 T T – Pr in t er Part s 13. Co mmun i cati o n po rt s 14. Un ro l l s h af t 15. P o w er co nn ec tio n 16.
4. Product Overview 4.5 Ope ning a nd C lo sin g t h e C o ver O pen M P N ova4 & 6 T T 1. Ope n c o ver. T h e i nner c o ver sl ides au to ma tica lly u p to geth e r w it h t he co v er.
4. Product Overview 4.5 Ope ning a nd C lo sin g t h e C o ver Cl os e M P N ov a4 & 6 T T 1. Cl o se co ve r. Th e i nn er cover sl ides au to ma tica lly do wn to geth e r w it h t he co v er.
5. Getting Started 5.1 Ov er vi e w M P N ov a4, 6 & 8 DT M P N ov a4 & 6 T T 1. In s ert m edia, M P No va4 & 6 DT , see c h apt er 5. 3.1 1. In s ert m edia. S ee M P N o va4 & 6 D T ( n o 1) i n t h e l e f t co l um n . 2. In s ert i nk ri bbo n , s ee c hapte r 5.
5. Getting Started 5.2 Ov er vi e w Pee l -Off M P N ov a4 & 6 DT P eel - Off M P N ov a4 & 6 T T P eel - O ff 1. In s ert p ee l -o f f media, s ee c h apt er 5. 4 1. In s ert p ee l -o f f media. S ee M P N o va4 & 6 DT Peel-o ff (n o 1) i n t he lef t co l um n .
5. Getting Started 5.3.1 Insert i n g Med i a MP N o v a4 & 6 Note: T h e pi ct ures s h o w n des c ribe a n M P Nova4 DT . T h e pro ces s w o rk s j ust t h e s ame f o r MP Nov a6 DT an d M P N o v a4 & 6 TT . 1. Un do t h e roll g u id e lock .
5. Getting Started 5.3.1 Insert i n g Med i a MP N o v a4 & 6 7. Lo c k t h e ro l l g u id e lo ck (t ur n the h a nd le c l o ck w is e). T h e ro l l s teeri ng s h a l l g uide t he ro l l, b u t s ha ll n o t be tig h t .
5. Getting Started 5.3.2 Insert i n g Med i a MP N o v a8 DT Adj us t ing t he Fan- Fol d S t eer i ng Note: It is o nl y n ec essary to ad ju s t t h e f an -f o ld steeri ng w h e n c h a ngi n g media ty p e. 1. A n A l le n k ey (2 m m) is mo un te d un d er n e at h t he f an- fo ld steeri ng.
5. Getting Started 5.3.2 Insert i n g Med i a MP N o v a8 DT Ins er t i ng M edi a 1. P ull h a nd l e to l if t t h e p ri n t h e ad f ro m t h e ro l l e r. 2. Ins ert t he me di a t hro u g h t h e f an -f o ld steeri ng a nd t h ro u g h the pri n t er.
5. Getting Started 5.3.2 Insert i n g Med i a MP N o v a8 DT 3. Pu ll ou t s om e of t h e m e d i a. 4. Fo ld t h e h a ndl e (t he pri nt h e ad f ol d s a u to mat ical l y o n to t he ro ll e r). 5. Pr e ss th e pr i n t bu t t on a fe w ti mes un t i l t he pri nter auto mati ca l l y f in ds t he co rrec t po sit io n o f th e medi a.
5. Getting Started 5.4 Ins e rt i n g Med i a – P ee l -Of f K i t Note: T h e pi ct ures s h o w n des c ribe a n M P Nov a4 DT P eel -O ff . T h e pr ocess w o r k s ju st t he sa m e f or M P Nov a4 & 6 T T Peel -O ff & M P Nov a6 DT P eel -O ff .
5. Getting Started 5.4 Ins e rt i n g Med i a – P ee l -Of f K i t 6. Ope n t he re w i n d un it s l o t by tur n i n g t he kn o b c lo ckwise wh i l e h o ldi n g t he c y l i n de r f i rml y. 7. S l i de t he bac k i ng pap er i n to the re wi nd un it s l o t.
5. Getting Started 5.4 Ins e rt i n g Med i a – P ee l -Of f K i t 8. C l o se t h e re wi n d un it slo t by tur n i n g t he kn o b co unt er- clo ckwise wh i le h o ldi n g t h e cyli n de r a nd bac k i ng pap er f i rml y. 9. R o l l t he bac k i ng pap er aro und t h e re wi n d uni t by tur n i n g t he kn o b co unt er- cl o ckw ise.
5. Getting Started 5.5 Ins e rt i n g Ink Ribbo n – MP No va 4 & 6 T T 1. U n do t h e ha n d l e a n d o pe n the cover. 2. R emo ve the o ld i nk ribbo n . 3. S l i de t he n e w i nk ribbo n o n to th e spo o l . 4. Feed t he i nk ri bbo n unde r the pri n t h ea d.
5. Getting Started 5.5 Ins e rt i n g Ink Ribbo n – MP No va 4 & 6 T T 5. Not e: T h e i nk ri bbo n m u s t n o t pass unde r t h e M P S (M edia P o si ti o n i n g S e n s o r). 6. M o v e th e em p ty r o ll , wh ic h w i ll co llect t he u se d i nk ribbo n , up a nd aro un d t h e pri n t h e ad.
5. Getting Started 5.5 Ins e rt i n g Ink Ribbo n – MP No va 4 & 6 T T 8. Fo l d t h e h a ndl e. 9. P re ss t h e p ri n t b utto n . T h e ink rib bo n w i ll a ut o ma ticall y w i n d aro und t he re wi n d spo o l , thu s te n si on i ng t he ink ribbo n.
5. Getting Started 5.6 Co nnec t in g No te: T h i s pro cess w o r k s f o r a ll the M P No va prin te rs. 1. Ma k e s u re th e p r i n t e r is s w i t ch ed of f ( t h e p ow e r sw i tc h is s et to ‘ 0’). 2. C o nn ec t t he co mm un ic atio n cable f ro m th e PC to th e pri n ter.
5. Getting Started 5 . 7 T e s t Prin t & Sens or A u t o Ad j u s t m en t T o be su re t he p ri n ter i s w o rki ng, a nd to ad j u s t t he me dia po sitio n in g s e n so r, M PS, to th e media, ma k e a test p ri n to u t: 1. Switc h o ff th e p ri n te r.
4. Operation 4.1.
6. Operation 6.2 In te rpr et in g t he S tat us Lam p - LED Red E n d o f medi a ro ll, e n d o f ink ribbo n o r t he h a ndl e is n o t fo l ded do wn.
6. Operation 6.3 Me dia P o sit i o nin g Se ns or Set ti ng s S enso r m ode Ap prox imat e sen so r r ea d ing po i n t, f ro m e dge of me d ia. 1. O u ter ( d e f ault) 16 mm 2. I nn e r 5 mm 3. Bl ac k m ark 5 mm T h e M P No v a prin t ers a re eq ui ppe d w i t h media po s iti o n i n g se n s o rs (M P S).
6. Operation 6.4 A dj us t in g t he Pr in t H ead Adj us t ing P r int H ead P os i t i on Note: Th e s e adj u s t men t s ar e on l y n ec es sary w he n c ha n gi n g to media w i t h di f f ere n t t h ic knes s o r w i dt h. T h e pic tures s h o wn des c ribe a n MP No v a4 DT .
6. Operation 6.4 A dj us t in g t he Pr in t H ead 6. N o te: M P N ov a4 DT only . On t h e M P No va4 D T th e po si tio n of th e p ri n t h e ad it se l f can be c ha n ge d. As def a ul t t h e re is a 3 mm n o n - pri n t ab l e a rea o n the lef t side.
7. Maintenance Clea ning t he P r in t H ea d a nd Ro ller On l y u s e cl ean in g c l ot h s fr om Ima j e. T h es e are sp eci a ll y desig ned f o r clea n i ng I ma je t herma l pri n te rs .
8. Troubleshooting T o Begi n W i th Wh e n tro ubles h o o tin g t he No va pr i n te r, it i s n ec essary to n a rro w do wn t he vari o u s po ssi ble ca u s es o f f au l t s : do es t h e pri n .
8. Troubleshooting T es t M et hod 1 A printo u t us i n g test met h o d 1 s h o w s t h e p r i n t e r ’ s p a r am e t er s an d s e t t i n g s , for ex a mp le: date, ti me, p ro gram v e rsio n, co m m un ica tio n set ti n gs a nd wh ic h typef aces are av ail ab l e.
8. Troubleshooting T es t M et hod 2 No te: T h i s me th od is on l y for a d v an c e d t r ou bl e s h oot i n g b y s e r v ice t e ch n i c ian s.
8. Troubleshooting T r oubl es hoot ing S ch edul e St at u s E rro r Measu re No p rin to u t Ö T h e p ri n t h e ad is n o t i n po sitio n (stat u s la m p is r e d) Ö Ch ec k t h e lev el, f o l d do w n the pri n t h ea d (D T , T T) Ö In co rrec t medi a Ö Ch ec k t h e m edi a, rep l ac e media (c hapte r 5.
9. Changeable Parts 9.1 Rep lac ing t h e R ol ler Note: T h e pi ct ures s h o w n des c ribe a n MP N o v a 4 DT . T h e pro c ess w o rk s j ust t h e s ame f o r all M P No va p r i nte r s . 1. C h ec k t h at t he p ri n ter is tur n ed o f f an d o pe n t he co v er (chapte r 4.
9. Changeable Parts 9.1 Rep lac ing t h e R ol ler 6. P ay caref ully at te n ti o n to the driv e be l t w he n r emo v ing the l ef t- h a n d e n d o f t h e ro l ler f ro m the pri nter.
9. Changeable Parts 9.1 Rep lac ing t h e R ol ler 8. I n se r t th e l e ft -h an d en d of the ro l l e r (t he e n d wit h t h e co g w h ee l). C h ec k t hat it f i ts in s ide t h e driv e b elt.
9. Changeable Parts 9.1 Rep lac ing t h e R ol ler 9. Ins ert t he ri g ht- h a nd e nd o f the rol l e r i n to po sitio n . 10 . P u s h t h e l ef t-ha n d e nd o f the ro l l e r do wnwa rds i n to the n o tc h un ti l t he ro lle r is para lle l wit h t he ed ge o f t h e pri nter.
9. Changeable Parts 9.1 Rep lac ing t h e R ol ler 11 an d 12 P u s h t he ro lle r sl i gh t ly to t h e lef t so th at t he l e ft -h an d en d s l ot s in to th e gro o ve. 13. C l o se t h e co v er (c hapte r 4.3 DT o r 4.5 T T ). 14. Sw i t ch on t h e pr in t er .
9. Changeable Parts 9.2 Rep lac ing t h e P r int Head Note: T h e pi ct ures s h o w n des c ribe an MP N o v a 4 DT . Th e pro cess w o rk s j ust t h e s ame f o r all M P No va p r i nte r s . 1. Ma k e su re t h e p r i n te r is tur n ed o f f an d o pe n t he co ver .
9. Changeable Parts 9.2 Rep lac ing t h e P r int Head 4. Caref ul l y re mo v e t h e p ri nt h e ad. 5. Caref ul l y re mo v e t h e cabl es f ro m th e bac k o f th e pri n t h e ad. No te: T h e re is a “b u tto n ” o n to p of th e rig ht cab l e.
9. Changeable Parts 9.2 Rep lac ing t h e P r int Head 6. Un p ac k t h e ne w pri nt h ea d and att ac h t h e cab les to the n e w p ri n t head. Rememb e r to h a n d l e t h e p ri n t h e ad w i t h c are! 7. Care f ull y i n se r t t h e pr i n t h e ad i n to po sitio n .
9. Changeable Parts 9.2 Rep lac ing t h e P r int Head 8. C h ec k t h at t he late ra l po si tio n h as n o t c ha n ge d. 3 mm is t he def a ul t po sition . No t e: O nly ad ju st ab l e o n M P N ov a 4 DT. 9. H o l d t h e p ri n t h e ad i n pl ac e a n d tig h te n t h e f i n ger nut.
10. Printer Options and Spare Parts 10.1 P ri n te r Opt io ns Pe el-Of f Ki t MP Nova4 & 6 DT, MP Nova4 & 6 TT I t em numbe r: 5335 41 N ov a4 533542 Nov a6 T h e pe e l-o ff devi ce separa t es the l abe l s f ro m t h e b ac k i n g paper, w hic h i s ro lle d u p be h i n d the pri n t er.
10. Printer Options and Spare Parts 10.1 P ri n te r Opt io ns 215 mm K i t MP Nova4 & 6 DT, MP Nova4 & 6 TT I t em numbe r: 5336 15 T h e 21 5 mm Ki t ma k es it po ss ibl e to u s e me dia ro l l s wit h diamet e rs u p t o 215 mm.
10. Printer Options and Spare Parts 10.2 S par e Part s Cons umables Pa r t nu mb e r D escr ipti o n 501933 501934 501935 501936 501937 501938 1. 10 x C lea n i ng c l o th s (4") 1. 50 x C lea n i ng c l o th s (4") 1. 10 x C lea n i ng c l o th s (6") 1.
11. Consumables Med i a Ge nera l S el f -ad h esi ve labe ls a re bac ked wit h s i l i co n-co ated bac k i ng paper, f ro m w hic h t he labe l i s remo ved. T h er e are dif f eren t types o f adh es ive: • T ickets ar e pri n t ed o n n o n-ad hesi ve pa per, w h i c h me a n s there i s n o n e ed f o r back i ng pap er.
12. Technical Specifications MP No v a 4 DT & TT Dime n sio n s (H x W x L) DT : 150 x 232 x 360 mm ( 6” x 9 ⅛ ” x 1 4 ⅛ ”) T T : 210 x 2 50 x 36 0 mm (8¼ ” x 9 ½” x 1 4 ⅛ ”) We igh t DT : 5.
12. Technical Specifications MP No v a 6 DT & TT Dime n sio n s (H x W x L) DT : 150 x 292 x 360 mm ( 6” x 1 1½” x 14 ⅛ ”) T T : 210 x 3 10 x 36 0 mm (8 ⅓ ” x 11 ⅞ ” x 14 ⅛ ”) Wei gh t DT : 6.
12. Technical Specifications MP No v a 8 DT Di me n s io n s (H x W x L) DT : 150 x 345 x 360 mm ( 6” x 1 3 ½ ” x 14 ⅛ ”) Wei gh t DT : 7.0 kg (15 ,5 l bs ) P o w er pac k 100/24 0V AC 50-60 .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Datamax MP NOVA4 DT c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Datamax MP NOVA4 DT - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Datamax MP NOVA4 DT, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Datamax MP NOVA4 DT va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Datamax MP NOVA4 DT, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Datamax MP NOVA4 DT.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Datamax MP NOVA4 DT. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Datamax MP NOVA4 DT ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
