Manuel d'utilisation / d'entretien du produit 9992-644 du fabricant Coleman
Aller à la page of 32
Gas Barbecue Use, Car e & Assembly Manual W ith Grill Lighting Instructions 8200 Series Model No. 9992-644 (LP Gas) ASSEMBLER/INST ALLER: Leave these instructions with the consumer . CONSUMER/USER: Read all instructions and keep in a safe place for future r eference.
2 DANGER • FOR OUTDOOR USE ON L Y . NEVER operate grill in enclosed areas, as this could lead to gas accumulating from a leak, causing an e xplosion or a carbon monoxide buildup which could result in injur y or death. DO NO T use in garages, breez ewa ys, sheds or any enclosed area.
3 • Installation must conf or m with local codes or , in the absence of local codes, with either the National Fuel Gas Code , ANSI Z223.1 (USA), Natur al Gas and Propane Installation Code, CSA B149.1 (Canada), or Propane Stor age and Handling Code, CSA B149.
4 Longer detachable po wer-supply cords or extension cords m ust be used with care. The marked electrical rating of the cord set or e xtension cord must be at least as great as the electrical rating of the appliance. If the appliance is of the grounded type , the e xtension cord should be a grounding-type 3-wire cord.
5 DANGER • DO NO T inser t any f oreign objects into the valve outlet. Y ou ma y damage the valve . A damaged valv e can cause a leak, which could result in e xplosion, fire, sev ere personal injur y or death.
6 W ARNING Handle a full cylinder with care. Gas is under high pressure . DANGER • NEVER store a spare L.P . gas supply cylinder under the grill body or inside the grill enclosure or in the vicinity of any heat producing appliance. (Fig. 3) • NEVER fill the cylinder bey ond 80% full.
7 1 3 4 5 6 7 8 9 10 11 12 2 13 1. Grill Hood 2. Ther mometer 3. Hood Handle 4. Control Knob: Side Bur ner 5. Electronic Igniter : Main, Side, and Rear Infrared Burner . 6. Conv ection V ents 7. Car t with Doors 8. Control Knobs: Main Bur ners 9. Control Knob: Rear Infrared Bur ner 10.
1 2 3 6 5 4 11 9 8 10 14 1. 9992-4131 Hood Assembly w/Logo Plate 2. 9992-4141 Hood Handle Assembly 3. 9992- 1111 T emperature Gauge Only 4. 9992-2731 Back IR Cover 5. 9992-1301 W arming Rack 6. 9992-4061 Back IR Burner Assembly LP 7. 9992-4071 Back IR Electrode Assembly 8.
Replacement Parts List — 8200 Series 15 18 26 20 21 37 36 41 29 25 35 33 40 15. 9992-121 1 Side Shelf Left (Condiment T ray) 16. 9992-4091 Door Magnet Bracket Assembly 17. 9992-1221 Drip Pan 18. 9992-4591 2 Hose Regulator LP 19. 9992-4301 Side Burner Shelf Right Assembly 20.
1. Place a piece of styrof oam from the packaging in the grill to leav e the gr ill hood propped open slightly (Fig. 6). 2. P osition the side shelf hooks with the slots on the side of the grill, near the back (Fig. 7). 3. P osition the side shelf flange ov er the inside top edge of the grill (Fig.
Side Burner Installation Grill Assembly — 8200 Series 11 Fig. 12 4. Secure the rear of the shelf by inserting (1) self tapping screw in the back of the g r ill and through the shelf tab (Fig. 16). Fig. 13 Fig. 14 Fig. 16 Fig. 15 1. P osition the side shelf hooks with the slots on the side of the grill, near the back (Fig.
Grill Assembly — 8200 Series Side Burner Installation (continued) Fig. 18 6. F rom under neath the side shelf, slide the v alv e stem through the hole in the front of the shelf (Fig. 18). Fig. 19 7. Inser t two mounting screws through the bez el and into the side burner valv e and tighten.
Fig. 25 Fig. 26b Fig. 23 11. Assemble the plastic he x nut and igniter button bac k onto the electrode module. These items should be hand tightened only (Fig. 23). Grill Assembly — 8200 Series Fig. 24 13. The igniter wire f or the side burner is shipped loose.
14 Car t Brace Installation 1. Open the grill doors. T wo car t braces will be installed at an angle from the car t base to the back side of the compar tment. The top end has a tab with a hole in the center . The bottom end has two protruding tabs. 2.
15 Grill Assembly — 8200 Series Fig. 36 Igniter Battery Installation 1. The AA batter y , spring and igniter cap must be installed before using (Fig. 36). 2. Install the AA batter y , negative end first. 3. Slide the spring assembly ov er the batter y .
16 IMPOR T ANT! T O ENSURE PROPER GAS FLO W , BURNER CONTROL V AL VES MUST BE “OFF” BEFORE OPENING THE GAS CYLINDER V AL VE . W ARNING: During assembl y of the grill and when attaching or replacing the L.
17 1. Check that the cylinder v alve is closed b y tur ning the cylinder knob clockwise to a full stop . 2. Check that all the g r ill burner knobs are in the off position. 3. Remov e the protective caps from the cylinder v alve and coupling nut. NO TE: The coupling nut connects to the large outside threads on the valv e outlet.
18 NA TURAL GAS CONVERSION KIT (not sho wn) P ar t Number Description 9992-214 8200 Series LP to NG Conv ersion Kit Natural Gas Installation NO TE: This step applies to you only if y ou are conv er ting your 8200 Series grill to use NA TURAL GAS . If you will be using y our grill with LP GAS, this section does not apply to y ou.
19 DANGER T O P REVENT F IRE OR E XPLOSION H AZARD : • NO SMOKING. DO NO T use or per mit sources of ignition in the area while doing a leak test. • P erform leak tests outdoors only . • NEVER perf or m a leak test with fire or flame. Leak T esting • If you detect a leak: 1.
20 1. Regular ly check the b ur ner venturi tubes f or bloc kage from an insect nest. Read “Cleaning the V enturi” in the section titled “Care, Maintenance, and Cleaning”, and also the section titled “T roubleshooting”. 2. Check that all the b ur ner venturi [H] are set ov er the valv e outlets [J] correctly .
21 Lighting Main Burners Lighting Side Burner 1. Push and turn the side bur ner control knob countercloc kwise to the “HIGH” position. (Fig. 49) 2. Immediately press and hold the electronic igniter button (Fig. 49). Y ou will hear a snapping sound.
22 Using the Rotisserie — 8200 Series The grill rotisserie system is designed to cook items from the back using infrared heat. The rotisser ie b ur ner is an infrared type which provides intense searing radiant heat.
23 Lighting the Rotisserie Burner 1. Push and turn on the control knob for the RO TISSERIE BURNER counterclockwise to the “HIGH” position (Fig. 44 and 52). W ait 5 seconds. 2. Press and hold the electronic igniter button (Fig. 53). Y ou w ill hear a snapping sound.
24 Good Bad Y ellow Blue Holes in Bur ner Y ellow Blue Burner Control Setting Tips • The high flame setting is too hot f or direct cooking. The high flame setting is good f or quick searing of meat, then finish cooking on medium or low flame settings .
25 Direct Method: • The heat source is directly below the f ood. • Use f or browning meat or cooking hot dogs and hamburgers, but check f ood frequently . • Use f or skillet and stir-fr y cooking, but limit the amount of oil and heat to be used.
26 REPRESENT A TIVE ILLUSTRA TION Steps For Cleaning V enturi: 1. Remove the cooking gr ates and the heat tents and set aside. 2. Using a 1/4” he x nut driver , remove the self-tapping scre ws holding the front heat shield (Fig. 58 and 59). Set the front heat shield aside.
CAUTION All cleaning and maintenance should be done only when the grill is cool & with the fuel supply tur ned off at the cylinder . If your g r ill is set up f or use with Natural Gas, turn off the gas supply at the system manual shut off v alve.
28 TYPE 1 CONNECTION ILLUSTRA TION Ther mal Sensitive Handwheel 1-5/16" Acme Connection Nipple with Excess Flow V alve Regulator Y OUR NEW GAS GRILL IS EQ UIPPED WITH A TYPE 1 CONNECTION DEVICE WHICH HAS 3 SAFETY FEA TURES (FIG. 64): 1. Proof of gas seal between the connector and the cylinder bef ore gas flow takes place.
Please do not send other correspondence to the address belo w. PRODUCT REGISTRA TION DEP AR TMENT PO BO X 2931 WICHIT A ,KS 67201 A TTN: DEPT 586 IMPOR T ANT! Coleman ¨ Grill W arranty Registration C.
7) Side burner (if applies) 8) Steamer/Fryer/W ar mer (if applies) 9) Side table design 10) Color of the grill (not including stainless steel) 11) Warming racks 12) Dependable igniter 13) Size of the .
Notes 31.
The Coleman Company , Inc. • 3600 N. Hydraulic • Wichita, KS 67219 U .S.A. 1-800-356-3612 • TDD: 316-832-8707 9992-030 (12/8/05) © 2005 The Coleman Company , Inc. All r ights reserved. Coleman ® and are registered trademarks of The Coleman Compan y , Inc.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Coleman 9992-644 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Coleman 9992-644 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Coleman 9992-644, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Coleman 9992-644 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Coleman 9992-644, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Coleman 9992-644.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Coleman 9992-644. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Coleman 9992-644 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
