Manuel d'utilisation / d'entretien du produit S 83600 CMM0 du fabricant AEG
Aller à la page of 28
S83200CMM0 S83600CMM0 EN FRIDGE FREE ZER USER MANUAL.
FOR PERFECT RESULTS Thank you for choosing th is AEG product. We have created it to give you impe ccable performance for many years, with innovative techno logies that help make life simpler – features you mi ght not find on ordinary appliances. Please spend a fe w minutes reading to get the very best from it.
CONTENTS 4 Safety information 7 Control panel 11 First use 12 Daily use 16 Helpful hints and tips 18 Care and cleaning 19 What to do if… 21 Technical data 21 Installation 24 Environmental concerns T.
SAFETY INFORMATIO N In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings.
• It is dangerous to alter the specifications or modify this product in any wa y. Any damage to the cord may cause a short - circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, co mpres sor) must be replaced by a certified service agent or qualified service personnel to avoid hazard.
Installati on For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there are damages on it. Do not connect the appli- ance if it is damaged. Report possible damages immediately to the place you bought it.
CONTROL PANEL 1 7 6 5 2 3 4 1 Fridge temperature colder bu tton 2 Fridge temperature warmer bu tton 3 ON/OFF button OK button 4 Freezer temperature warmer button 5 Display 6 Freezer temperature colder.
8 FROSTMATIC function 9 COOLMATIC function 10 Child Lock function Switching on To switch on the appliance do these steps: 1. Connect the mains plug to the power socket. 2. Press the appliance ON/OFF button if the display is off. 3. The alarm buzzer could operate after few seconds.
Set default temperature: • +5°C for the fridge • - 18°C for the freezer The temperature indicators show the set temperature. To restore the set default temperature switch off the appliance.
1. Press the Mode button until the corresponding icon appears. The COOLMATIC indicator flashes. 2. Press the OK button to confirm. The COOLMATIC indicator is shown. The COOLMATIC function shuts off automatically after approximately 6 hours. To switch off the function before its automatic end: 1.
The FROSTMATIC indicator is shown. This function stops automatically after 52 hours. To switch off the function before its automatic end: 1. Press the Mode button until the FROSTMATIC indicator flashes. 2. Press the OK button to confirm. 3. The FROSTMATIC indicator goes off.
DAILY USE Storage of frozen food When first starting - up or after a period out of use, before putting the products in the com- partment let the appliance run at least 2 hours on the higher settings.
Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be posi- tioned as desired. Bottle rack Place the bottles (with the opening facing front) in the pre - positioned shelf. If the shelf is positioned horizontally, place only closed bottles.
Positioning the door shelves To permit storage of food packages of vari- ous sizes, the door shelves can be placed at different heights. To make these adjustments proceed as fol- lows: gradually pull the shelf in the direction of the arrows until i t comes free, then repos i- tion as required.
ProFresh Mode If the compartment is not needed as FreshBox, the settings can be changed in order to have it just as a low temperature drawer. To switch on the function: 1. Slide upward the flap as shown in the figure. To switch off the function: 1. Slide down the flap.
MAXIBOX drawer The drawer is suitable for storing fruit and vege- tables. There is a separator inside the drawer that can be placed in different positions to allow for the sub- division best suited to personal needs.
Hints for energy saving • Do not open the door frequently or leave it open longer than absolutely necessary. • If the ambient temperature is high and the Temperature Regulator is set to low tempera- ture and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator.
Hints for storage of frozen food To obtain the best performance from this appliance, you should: • make sure that the commercially frozen foodstuffs were adequately stored by the retai l- er; • be.
It is important to periodically clean the defr ost water drain hole in the middle of the refrigerator compartment channel to prevent the water over- flowing and dripping o nto the food inside. Use the special cleaner provided, which you wi ll find already inserted into the drain hole.
Problem Possible cause Solution The room temperature is too high. Decrease t he room temper ature. The FROSTMATIC function is switched on. Refer to "FROSTMATIC function" . The COOLMATIC function is switched on. Refer to "COOLMATIC func tion".
Problem Possible cause Solution "dEMo" appears on the display. The appliance is in demonstra- tion mode. Keep pressed approximately 10 sec the OK button since a long sound of buzzer is heard and the display shut off for a short while: appliance start works regularly.
Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Location The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet.
Rear spacers You can find the two spacers in the bag with doc- umentation. Do these steps to install the spacers: 1. Release the screw. 2. Engage the spacer below the screw. 3. Turn the spacer to the right position. 4. Tighten again the screws. Levelling When placing the appliance ensure that it stands level.
Removing the shelf holders Your appliance is equipped with shelf retainers that make it possible to secure the shelves during transportation. To remove them proceed as follows: 1. Move the shelf holders in the direction of the arrow (A). 2. Raise the shelf from the rear and push it for- ward until it is freed (B).
for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative conseq uences for the environment and human health, which could otherwise be caused by inappropri ate waste handling of this product.
26.
27.
www.aeg.com/shop 210621382 - A - 022011.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté AEG S 83600 CMM0 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du AEG S 83600 CMM0 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation AEG S 83600 CMM0, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le AEG S 83600 CMM0 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le AEG S 83600 CMM0, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du AEG S 83600 CMM0.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le AEG S 83600 CMM0. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei AEG S 83600 CMM0 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
