Manuel d'utilisation / d'entretien du produit 3.0.1 du fabricant 3D Innovations
Aller à la page of 88
B-1 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 APPENDIX B Site-to-Site VPN User Interface Reference The pages that you access by selecting Site-T o-Site VPN Manager from the T ools menu, or clicking the Site-T o-Site VPN Manager button on the toolbar , help you conf igure site-to-site VPNs.
Appendix B Site-to-Site VPN User Interface Reference Site-to-Site VPN Manager Window B-2 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Site-to-Site VPN Manager Window Use the Site-to-Site VPN Manager window to: • V ie w all av ailable VPN topologies.
B-3 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site-to-Site VPN Manager Window VPN Summary Page Use the VPN Summary page to view information about a selected VPN topology .
Appendix B Site-to-Site VPN User Interface Reference Site-to-Site VPN Manager Window B-4 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Navigation Path Open the Site-to-Site VPN Manager W indow , page B-2 , select a topology in the VPNs selector , then select VPN Summary in the Policies selector .
B-5 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site-to-Site VPN Manager Window Primary Hub A vailable if the VPN topology type is hub-and-spoke. The name of the primary hub in the hub-and-spoke topology .
Appendix B Site-to-Site VPN User Interface Reference Site-to-Site VPN Manager Window B-6 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Routing Protocol A vailable only if the selected technology is GRE, GRE Dynamic IP , or DMVPN.
B-7 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site-to-Site VPN Manager Window Peers Page Use the Peers page to view the endpoints def ined for a VPN topology , including the internal and external VPN interf aces and protected networks assigned to the de vices in the topology .
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-8 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Create VPN Wizard Security Manager supports three basic types of topologies with which you can create a site-to-site VPN.
B-9 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard The following pages describe the steps in the Create VPN wizard: • N.
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-10 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Related Topics • Create VPN W izard, page B-8 • Editing a VPN T o.
B-11 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard Note When editing the device selection for a VPN topology , the Device Selection tab is used. The elements of the tab (except for the b uttons) are identical to those that appear on the Device Selection page.
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-12 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Field Reference T able B-5 Cr eate VPN wizar d > Device Selection .
B-13 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard Endpoints Page Use the Endpoints page of the Create VPN wizard to view the de vices in your VPN topology , and def ine or edit their external or internal interf aces and protected networks.
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-14 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Field Reference T able B-6 Cr eate VPN wizar d > Endpoints Pag e Element Description Role The role of the device—hub, spok e, or peer .
B-15 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard Protected Networks The protected networks that are def ined for the selected de vice.
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-16 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Edit Endpoints Dialog Box Use the Edit Endpoints dialog box to: • Edit the VPN interfaces and protected networks def ined for devices.
B-17 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard • Clicking OK on any tab in the dialog box sa ves your def initions on all the tabs. Navigation Path Y ou can access the Edit Endpoints dialog box from the Endpoints P age, page B-13 (or tab).
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-18 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 becomes unav ailable. Y ou can only conf igure a backup interface on a Cisco IOS security router , which is a spoke in the VPN topology .
B-19 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard Connection T ype Note This element is only available in a hub-and-spok e VPN topology , if the hub is an ASA or PIX 7.0 de vice and the selected technology is regular IPSec.
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-20 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 T unnel Source A vailable for a hub when the selected technology is GRE or DMVPN.
B-21 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard Defining VPN Services Module (VPNSM) or VPN SPA Settings When you sel.
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-22 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Note • Before you def ine the VPNSM or VPN SP A settings, you must import your Catalyst 6500/7600 device to the Security Manager in ventory and disco ver its interfaces.
B-23 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard Slot From the list of av ailable slots, select the VPNSM blade slot number to which the inside VLAN interface is connected, or the number of the slot in which the VPN SP A blade is inserted.
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-24 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Protected Networks Tab Use the Protected Networks tab on the Edit Endpoints dialog box to edit the protected networks that are def ined on a selected de vice in the Endpoints table.
B-25 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard Related Topics • Edit Endpoints Dialog Box, page B-16 • Def ining.
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-26 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 FWSM Tab Note The FWSM tab is only av ailable in a hub-and-spoke VPN topology , when the selected hub is a Catalyst 6500/7600 device.
B-27 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard Note Before def ining the FWSM settings, you must import your Catalyst 6500/7600 de vice to the Security Manager in ventory .
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-28 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 VRF Aware IPSec Tab Use the VRF-A ware IPSec tab on the Edit Endpoints dialog box to conf igure a VRF-A ware IPSec polic y on a hub in your hub-and-spoke VPN topology .
B-29 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard • Deployment may fail if the IPSec Aggre gator is conf igured with the same keyring CLI command as the e xisting preshared key (ke yring) command, and is not referenced by any other command.
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-30 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Enable VRF Settings When selected, enables the conf iguration of VRF settings on the selected hub for the selected hub-and-spoke topology .
B-31 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard Interface T owards Provider Edge A vailable only when a 2-Box solution is selected. The VRF forwarding interface on the IPSec Aggre gator towards the PE device.
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-32 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Dial Backup Settings Dialog Box Use the Dial Backup Settings dialog box to def ine optional settings for conf iguring a dial backup policy for your site-to-site VPN.
B-33 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard Mandatory settings for dial backup are conf igured in the VPN Interface tab on the Edit Endpoints dialog box. See VPN Interface T ab, page B-17 .
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-34 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 High Availability Page Use the High A vailability page to def ine a group of hubs as an HA group. Note When editing a VPN topology , the High A vailability tab is used.
B-35 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard Related Topics • Endpoints Page, page B-13 • Conf iguring High A .
Appendix B Site-to-Site VPN User Interface Reference Create VPN Wizard B-36 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Hold T ime The duration in seconds (within the range of 2-255) that a standby hub will wait to recei ve a hello message from the activ e hub before concluding that the hub is down.
B-37 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Site to Site VPN Policies Y ou can access site-to-site VPN po.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-38 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 On the IKE Proposal page, you can view the parameters of the selected IKE proposal, select a dif ferent one from a list of predef ined IKE proposals, or create a new one.
B-39 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies IPSec Proposal Page Use the IPSec Proposal page to edit the IPSec policy def initions for your VPN topology . For more information about IPSec Proposals, see Understanding IPSec T unnel Policies, page 9-63 .
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-40 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Navigation Path Open the Site-to-Site VPN Manager W indow , page B-2 , select a topology in the VPNs selector , then select IPSec Proposal in the Policies selector .
B-41 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies T ransform Sets The transform set(s) to use for your tunnel policy . Transform sets specify which authentication and encryption algorithms will be used to secure the traff ic in the tunnel.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-42 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Modulus Group A vailable if Enable Perfect Forw ard Secrecy is selected. Select the required Diff ie-Hellman key deri vation algorithm from the Modulus Group list box.
B-43 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Enable Re verse Route Supported on ASA de vices, PIX 7.0 de vices, and Cisco IOS routers except 7600 de vices, and when the selected technology is IPSec.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-44 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 VPN Global Settings Page Use the VPN Global Settings page to def ine global settings for IKE, IPSec, N A T , and fragmentation, that apply to devices in your VPN topology .
B-45 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies • Conf iguring VPN Global Settings, page 9-73 Field Referen.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-46 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 SA Requests System Limit Supported on routers running IOS version 12.3(8)T and later , except 7600 routers. The maximum number of SA requests allowed before IKE starts rejecting them.
B-47 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Xauth T imeout A vailable when Easy VPN is the selected technology , and the selected device is a Cisco IOS router or Catalyst 6500/7600 de vice.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-48 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 NAT Settings Tab Use the N A T Settings tab of the VPN Global Settings page to def ine the N A T settings that will be conf igured on the devices in your VPN topology .
B-49 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Field Reference T able B-1 7 VPN Global Settings P age > NA T Set tings T ab Element Description Enable N A T T rav ersal When selected, enables you to conf igure N A T trav ersal on a device.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-50 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 General Settings Tab Use the General Settings tab of the VPN Global Settings page to def ine fragmentation settings including maximum transmission unit (MTU) handling parameters.
B-51 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Field Reference T able B-1 8 VPN Global Settings P age > General Set tings T ab Element Description Fragmentation Settings Fragmentation Mode Supported on Cisco IOS routers and Catalyst 6500/7600 devices.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-52 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 DF Bit Supported on Cisco IOS routers, Catalyst 6500/7600 devices, PIX 7.0 and ASA devices. A Don't Fragment (DF) bit within an IP header determines whether a de vice is allowed to fragment a pack et.
B-53 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Preshared Key Page Use the Preshared K ey page to vie w or edit the parameters for a preshared key policy . For information about Preshared K ey policies, see Understanding Preshared Ke y Policies, page 9-74 .
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-54 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Navigation Path Open the Site-to-Site VPN Manager W indow , page B-2 , select a topology in the VPNs selector , then select Preshared K ey in the Policies selector .
B-55 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Regenerate K ey (Only in Next Deployment) Only a vailable if Auto Generate is selected. Select this check box if you want Security Manager to generate a new k ey for the next deployment to the de vice(s).
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-56 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Negotiation Method Main Mode Address Select this negotiation method for e xchanging key information, if the IP address of the devices is kno wn.
B-57 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Public Key Infrastructure Page Use the Public K ey Infrastruc.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-58 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Related Topics • Conf iguring Public Ke y Infrastructure Po.
B-59 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies GRE Modes Page Use the GRE Modes page to def ine the routing and tunnel parameters, that enable you to conf igure IPSec tunneling with GRE, GRE Dynamic IP , and DMVPN policies.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-60 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Navigation Path Open the Site-to-Site VPN Manager W indow , page B-2 , select a topology in the VPNs selector , then select GRE Modes in the Policies selector .
B-61 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies AS Number A vailable only if you selected the EIGRP routing protocol. The number that will be used to identify the autonomous system (AS) area to which the EIGRP packet belongs.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-62 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Delay A v ailable only if you selected the EIGRP routing protocol. The throughput delay for the primary route interface, in microseconds.
B-63 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies T unnel Parameters T ab T unnel IP Click one of the follo win.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-64 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Enable IP Multicast Select to enable multicast transmissions across your GRE tunnels.
B-65 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies T able B-22 describes the elements on the GRE Modes page for conf iguring a DMVPN policy .
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-66 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Hello Interval A v ailable only if you selected the EIGRP routing protocol. The interval between hello pack ets sent on the interface, from 1 to 65535 seconds.
B-67 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Failo ver Cost A v ailable if you selected the OSPF or RIPv2 routing protocol. The cost of sending a packet on the secondary (failo ver) route interface.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-68 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Server Load Balance When selected, enables the conf iguration of load balancing on a Cisco IOS router that serves as a hub in a multiple hubs conf iguration.
B-69 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Easy VPN IPSec Proposal Page Use the Easy VPN IPSec Proposal page to create or edit the IPSec policy def initions for your Easy VPN server .
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-70 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Navigation Path Open the Site-to-Site VPN Manager W indow , page B-2 , select a topology in the VPNs selector , then select Easy VPN IPSec Proposal in the Policies selector .
B-71 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Enable RRI Supported on Cisco IOS routers, PIX 7.0 and ASA devices. When selected (the default), enables Re verse Route Injection (RRI) on the crypto map (static or dynamic) for the support of VPN clients.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-72 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Group Policy Lookup/AAA Authorization Method Supported on Cisco IOS routers only . The AAA authorization method list that will be used to def ine the order in which the group policies are searched.
B-73 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies User Group Policy Page Use the User Group Policy page to create or edit a user group polic y on your Easy VPN server .
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-74 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Tunnel Group Policy (PIX 7.0/ASA) Page Use the T unnel Group Policy (PIX 7.0/ASA) page to create or edit tunnel group policies on your Easy VPN server .
B-75 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Navigation Path Open the Site-to-Site VPN Manager W indow , page B-2 , select a topology in the VPNs selector , then select T unnel Group Policy (PIX 7.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-76 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Group Policy The group policy to be applied to the tunnel group.
B-77 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Accounting Server Group The name of the accounting server group (LOCAL if the tunnel group is conf igured on the local device).
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-78 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Tunnel Group Policy > IPSec Tab Use the IPSec tab of the T unnel Group Policy (PIX 7.0/ASA) page to specify IPSec and IKE parameters for the tunnel group policy .
B-79 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Field Reference T able B-26 Easy VPN Serv er > T unnel Group P olicy (PIX 7 .0/ASA) P age > IPSec T ab Element Description Preshared K ey The value of the preshared key for the tunnel group.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-80 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Tunnel Group Policy > Advanced Tab Use the Adv anced tab of the PIX7.0/ASA T unnel Group Policy page to specify interface-specif ic information for your tunnel group.
B-81 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Navigation Path Open the T unnel Group Policy (PIX 7.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-82 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Tunnel Group Policy > Client VPN Software Update Tab Use the Client VPN Software Update tab of the PIX7.
B-83 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies Related Topics • T unnel Group Policy (PIX 7.
Appendix B Site-to-Site VPN User Interface Reference Site to Site VPN Policies B-84 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Navigation Path Open the Site-to-Site VPN Manager W indow , page B-2 , select a topology in the VPNs selector , then select Client Connection Characteristics in the Policies selector .
B-85 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference VPN Topologies Device View Page VPN Topologies Device View Page Device vie w provides an easy way to vie w and edit the structure of your VPN topologies at the device le vel.
Appendix B Site-to-Site VPN User Interface Reference VPN Topologies Device View Page B-86 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Edit VPN Policies button Click to edit the VPN policies def ined for a selected VPN topology . The VPN Summary page opens, displaying information about the VPN topology , including its def ined policies.
B-87 User Guide for Cisco Security Manager 3.0.1 OL-8214-02 Appendix B Site-to-Site VPN User Interface Reference VPN Topologies Device View Page.
Appendix B Site-to-Site VPN User Interface Reference VPN Topologies Device View Page B-88 User Guide for Cisco Security Manager 3.0.1 OL-8214-02.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté 3D Innovations 3.0.1 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du 3D Innovations 3.0.1 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation 3D Innovations 3.0.1, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le 3D Innovations 3.0.1 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le 3D Innovations 3.0.1, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du 3D Innovations 3.0.1.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le 3D Innovations 3.0.1. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei 3D Innovations 3.0.1 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
