Manuel d'utilisation / d'entretien du produit LV-S2 du fabricant Canon
Aller à la page of 44
E English Multimedia Pr ojector Owner’ s Manual L V -S2.
2 C A U T I O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 COMPLIANCES The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. A C P ower Cor d for the United States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).
5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 14 COMPUTER INPUT 22 VIDEO INPUT 30 SETTING 35 APPENDIX 37 PREP ARA TION 7 NOMENCHTOR 7 SETTING-UP THE PROJECTOR 8 CONNECTING AC POWER COR.
6 FEA TURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. It utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
7 PREP ARA TION NOMENCHT OR BO TT OM BACK HOT AIR EXHAUSTED ! Air blown from Exhaust Vents is hot. When using or installing the projector, the following precautions should be taken. ● Do not put any flammable object near these vents. ● Keep front grills at least 3 ’ (1m) away from any object, especially heat-sensitive objects.
NO TE ON THE PO WER CORD AC Power Cord must meet requirements of the country where the projector is used. Confirm an AC plug type with the chart below and proper AC Power Cord must be used. If the supplied AC Power Cord does not match your AC outlet, contact your sales dealer.
9 PREP ARA TION POSITIONING THE PR OJECT OR ● This projector is designed to project on a flat projection surface. ● The projector can be focused from 3.6 ’ (1.1m) ~ 26.2 ’ (8m). ● Refer to the figure below to adjust a screen size. ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by rotating the ADJUSTABLE FEET.
10 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR ● Do not drop or bump a projector, otherwise damage or malfunction may result. ● When carrying a projector, use a suitable carrying case. ● Do not transport a projector by using a courier or transport service in an unsuitable transport case.
VIDEO IN Y –– Pb / Cb –– Pr / Cr RGB IN RESET COMPUTER A UDIO IN A V A UDIO IN A UDIO OUT S – VIDEO IN CONTROL 11 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR Connect the S-VIDEO output from your video equipment to this jack. (Refer to P13.
12 CONNECTING THE PR OJECT OR VIDEO IN RGB IN RESET COMPUTER AUDIO IN A V AUDIO IN A UDIO OUT S – VIDEO IN CONTROL Y –– Pb / Cb –– Pr / Cr ON 1 DIP ON OFF 2 3 4 5 6 13" MODE (640 x 480).
13 CONNECTING THE PR OJECT OR CONNECTING VIDEO EQUIPMENT VIDEO IN Y –– Pb / Cb –– Pr / Cr RGB IN RESET COMPUTER AUDIO IN A V AUDIO IN A UDIO OUT S – VIDEO IN CONTROL Video Source (example) V.
INPUT POWER MUTE MENU NO SHOW AUTO PC ADJ. IMAGE FREEZE P-TIMER W T D ZOOM KEY STONE + – VOL SET 14 BEFORE OPERA TION Battery is installed in Remote Control Unit. Before operation, pull out and remove a protect sheet from Remote Control Unit. This sheet protecting discharge of a battery.
15 BEFORE OPERA TION Pull out Battery Holder. Replace with new battery. Install with battery (+),( – ) marks properly. Install battery and Battery Holder into Remote Control Unit. BATTERY LITHIUM BATTERY CR2025 (3.0V) (+) mark indicates its (+) polarity.
16 READ Y LAMP REPLACE LAMP WARNING TEMP . INPUT POWER SET KEY STONE MENU VOL V OL – + BEFORE OPERA TION T OP CONTROLS AND INDICA T ORS Used to open or close MENU operation. (P17, 18) MENU BUTTON READY INDICATOR SET BUTTON POWER ON – OFF BUTTON INPUT BUTTON WARNING TEMP.
17 BEFORE OPERA TION HO W T O OPERA TE THE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION Display ON-SCREEN MENU Press MENU button to display ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Move POINTER (red frame) to MENU ICON that you want to select by pressing POINT RIGHT / LEFT buttons.
18 BEFORE OPERA TION MENU B AR PC SYSTEM MENU Used to select computer system. (Refer to P22, 23) IMAGE ADJUST MENU Used to adjust computer image. [Contrast / Brightness / Color / Tint / White balance .
19 B ASIC OPERA TION TURNING ON THE PR OJECT OR Connect the projector's AC Power Cord into an AC outlet. LAMP Indicator lights red, and READY Indicator lights green. Press POWER ON-OFF button on Top Control or on Remote Control Unit to ON. LAMP Indicator dims, and Cooling Fans start to operate.
20 Press the FREEZE button on the Remote Control Unit to freeze the picture on-screen. To cancel the FREEZE function, press the FREEZE button again or press any other button. PICTURE FREEZE FUNCTION KEYST ONE ADJUSTMENT 1 Press KEYSTONE ▲ / ▼ button on Remote Control Unit or KEYSTONE button on Top Control or select Keystone on SETTING menu.
21 B ASIC OPERA TION Press the NO SHOW button on the Remote Control Unit to black out the image. To restore to normal, press the NO SHOW button again or press any other button. NO SHO W FUNCTION Message disappears after 4 seconds. No show Press the P-TIMER button on the Remote Control Unit.
22 COMPUTER INPUT SELECTING THE INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose Computer by pressing the INPUT button on Top Control or on Remote Control Unit. If the projector cannot reproduce a proper image, select correct input source through the MENU OPERATION (see below).
23 COMPUTER INPUT COMP A TIBLE COMPUTER SPECIFICA TIONS This projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 100 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq.
24 COMPUTER INPUT PC ADJUSTMENT A UT O PC ADJUSTMENT The Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows. Press the MENU button and the ON-SCREEN MENU will appear.
25 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune to the display signals of most personal computers. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by the Multi-Scan system of this projector.
26 COMPUTER INPUT NOTE : Display area (H/V) and Full screen cannot be adjusted when “ 1035i (HDTV) ” or “ 1080i (HDTV) ” is selected on PC SYSTEM Menu (P22). Selects the area displayed with this projector. Select the resolution at the Display area dialog box.
27 COMPUTER INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) IMA GE LEVEL SELECT (DIRECT) Select the image level among Standard, High contrast and Custom by pressing the IMAGE button on the Remote Control Unit. IMAGE button Standard High contrast Custom Normal picture adjustment preset on this projector.
28 COMPUTER INPUT Press the POINT LEFT/RIGHT but- tons to adjust value. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame to the IMAGE ADJUST Menu icon. 1 2 Press the POINT DOWN button to move the red frame to the item that you want to adjust.
29 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame to the SCREEN Menu icon.
30 VIDEO INPUT SELECTING THE INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose Video by pressing the INPUT button on the Top Control or on the Remote Control Unit. If the projector cannot reproduce a proper video source, select correct input source through the MENU OPERATION (see below).
31 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING THE VIDEO SYSTEM Press the MENU button and the ON-SCREEN MENU will appear.
32 VIDEO INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame to the IMAGE SELECT Menu icon. 1 2 Press the POINT DOWN button to move the red frame to the level that you want to set and then press the SET button.
33 VIDEO INPUT Press the POINT LEFT/RIGHT but- tons to adjust value. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame to the IMAGE ADJUST Menu icon. 1 2 Press the POINT DOWN button to move the red frame to the item that you want to adjust and then press the SET button.
34 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame to the SCREEN Menu icon.
35 SETTING Ceiling When this function is “ On, ” the picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounted projector. Rear When this function is “ On, ” picture is left / right reversed.
36 SETTING This function turns the Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.
37 APPENDIX LAMP REPLA CEMENT LAMP REPLA CE When the life of the Projection Lamp of this projector draws to an end, the LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the projection lamp with a new one promptly. Follow these steps to replace the lamp assembly.
38 APPENDIX LAMP REPLA CE COUNTER Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting. NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced.
39 CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When the projector is not in use, attach Lens Cover.
40 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check the following: 1. Make sure you have connected a projector to your computer or video equipment as described in the section "CONNECTING THE PROJECTOR" on pages 11 ~ 13.
41 APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. If the problem still persists after following all operating instructions, contact the sales dealer where you purchased the projector or the service center.
42 APPENDIX TECHNICAL SPECIFICA TIONS 0.7" TFT Active Matrix type, 3 panels Multi-media Projector 6.39lbs (2.9 kg) 10.24" x 2.99" x 9.63" (260mm x 76mm x 244.5mm) (not including Adjustable Feet) 800 x 600 dots 1,440,000 (800 x 600 x 3 panels) PAL, SECAM, NTSC, NTSC4.
43 APPENDIX CONFIGURA TIONS OF THE TERMINALS COMPUTER INPUT TERMINAL (ANALOG) Terminal : HDB15-PIN Connect the display output terminal of the computer to this terminal with the VGA Cable (supplied). When connecting the Macintosh computer, MAC Adapter (not supplied) is required.
1AA6P1P3539-- (MS8P) ©CANON INC . 2002 YT1-1333-000 PRINTED IN JAP AN CANON INC. 30-2, Shimomaruko 3-chome , Ohta-ku, T okyo 146-8501, Japan CANON U .S.A., INC. One Canon Plaza, Lake Success , NY 11042, U .S.A. CANON CANAD A, INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada CANON LA TIN AMERICA, INC.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Canon LV-S2 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Canon LV-S2 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Canon LV-S2, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Canon LV-S2 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Canon LV-S2, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Canon LV-S2.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Canon LV-S2. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Canon LV-S2 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
