Manuel d'utilisation / d'entretien du produit LV-5220 du fabricant Canon
Aller à la page of 64
E English Multimedia Pr ojector Owner’ s Manual LV -7225 L V -7220 L V -5220.
2 F eatures and Design ◆ Wide Zoom Lens This projector is equipped with Wide Zoom Lens which is 1.6 times the zoom ratio, and it allows you to enjoy 100" screen size in range of 8.2' (2.5m) to 13.1' (4m). ◆ Compact Design This projector is designed compact in size and weight.
3 T able of Contents F eat ures and Design . . . . . . . . . . . . . . . . . . .2 T able of Cont ents . . . . . . . . . . . . . . . . . . . . . .3 To the Owner . . . . . . . . . . . . . . . . . . . . . . . . .4 Saf ety Instr uctions . . . . . . . . . .
4 To the Owner CAUTION : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
6 Safety Instructions USE CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR –D o not drop or bump a projector, otherwise damages or malfunctions may result. – When carrying a projector, use a suitable carrying case. – Do not transport a projector by using a courier or transport service in an unsuitable transport case.
7 The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Po wer Cor d for the Unit ed States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).
8 Bac k q Focus Ring w Speaker e Power Cord Connector r Infrared Remote Receiver t Zoom Lever y Projection Lens u Lens Cover (See page 50 for attaching.
9 Pa rt Names and Functions A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.
10 Pa rt Names and Functions INPUT W ARNING LAMP REPLACE MENU POWER AUT O SET SET VOL VOL + - q w e r t y i y LAMP REPLACE indicator Turns yellow when the life of the projection lamp draws to an end. (p52) t WARNING indicator Lights red when the projector detects abnormal condition.
11 Pa rt Names and Functions Pa rt Names and Functions Remot e Contr ol Unit q @2 RESET/ON/ALL-OFF switch When using the remote control unit, set this switch to “ON.
12 Pa rt Names and Functions Spotlight P oint er F unction Pointer ✔ Note: You can choose the size of Spotlight (Large, Middle, and Small) and the pattern of Pointer (Arrow, Finger, and Dot) in the Setting Menu. See “Pointer” on page 46. This remote control unit emits a laser beam from the laser light window.
13 Pa rt Names and Functions Pa rt Names and Functions The remote control unit can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect your computer and the projector with the supplied USB cable. (See page 17 for connection.
14 Pa rt Names and Functions To insure safe operation, please observe the following precautions : ● Use (2) AA, UM3 or LR6 type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid.
15 Installation Projection angle can be adjusted up to 11.9 degrees with the adjustable feet. Lift the front of the projector and pull upward the feet lock latches on both sides of the projector.
16 NO TE ON THE POWER CORD AC power cord must meet requirement of the country where you use a projector. Confirm an AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer.
17 Installation Installation Connecting t o a Comput er AUDIO R IN L VIDEO IN DVI-I/ RGB IN-1 SERVICE POR T S-VIDEO IN COMPUTER AUDIO IN AUDIO OUT RGB IN-2/ COMPONENT IN/ RGB OUT RESET MCI Cables used.
18 AUDIO R IN L VIDEO IN DVI-I/ RGB IN-1 SERVICE POR T S-VIDEO IN COMPUTER AUDIO IN AUDIO OUT RGB IN-2/ COMPONENT IN/ RGB OUT RESET MCI Installation Connecting t o V ideo Equipment Cables used for con.
19 Installation Installation Connecting t o Component V ideo Equipment AUDIO R IN L VIDEO IN DVI-I/ RGB IN-1 SERVICE POR T S-VIDEO IN COMPUTER AUDIO IN AUDIO OUT RGB IN-2/ COMPONENT IN/ RGB OUT RESET .
20 Connect the projector's AC power cord into an AC outlet. The POWER indicator blinks red in a moment and lights red. Press the POWER button on the top control or on the remote control unit. The POWER indicator turns green lighting and the cooling fans start to operate.
21 Basic Operation Basic Operation Press the POWER button on the top control or on the remote control unit, and a message "Power off?" appears on the screen. Press the POWER button again to turn off the projector. The POWER indicator starts to blink red, and it continues while the cooling fans are operating for about 90 seconds.
22 Basic Operation INPUT L A MENU AUT O SET SET VOL VOL + - Top Control Menu bar Pointer (red frame) Menu icon Item data Press the Point 7 8 buttons to adjust value.
23 Basic Operation Basic Operation Menu Bar PC System Menu Used to select computer system. (p28) Image Adjust Menu Used to adjust computer image. [Contrast / Brightness / Color temp. / White balance (R/G/B) / Sharpness / Gamma] (p33) Setting Menu Used to change settings of the projector or reset lamp replace counter.
24 Basic Operation Rotate the Zoom Lever to zoom in and out. Rotate the Focus Ring to adjust the projected picture focus. Zoom Lever Focus Ring Au to Setup F unction Auto setup function is provided to.
25 Basic Operation Basic Operation Press the FREEZE button on the remote control unit to freeze the picture on the screen. To cancel FREEZE, press the FREEZE button again.
26 Basic Operation 1 2 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Sound Menu icon. Volume Press the VOL (+/–) button on the top control or on the remote control unit to adjust volume.
27 Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control unit. Before using these buttons, correct input source should be selected through menu operation as described below.
28 Computer Input The Auto PC Adjustment function operates to adjust the projector. PC System Menu The PC System Menu icon displays the system being selected. The systems on this dialog box can be selected. Press the MENU button and the On-Screen Menu will appear.
29 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows. Move the red frame pointer to the Auto PC Adj.
30 Computer Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the PC Adjust Menu icon. 1 2 Press the Point d d button to move the red frame pointer to the item that you want to adjust and then press the SET button.
31 Computer Input Select the resolution at the Display area dialog box. Display area Adjusts the horizontal area displayed by this projector. Press the Point 7 8 button to decrease/increase value and then press the SET button. Display area H Adjusts the vertical area displayed by this projector.
32 Computer Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Select Menu icon. 1 2 Press the Point d d button to move the red frame pointer to the level that you want to set and then press the SET button.
33 Computer Input Press the Point 7 8 button to adjust value. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Adjust Menu icon. 1 2 Press the Point d d button to move the red frame pointer to the item that you want to adjust, and then press the SET button.
34 Computer Input This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Screen Menu icon.
35 Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control unit. Before using these buttons, correct input source should be selected through menu operation as described below. Press the MENU button and the On-Screen Menu will appear.
36 Video Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Input Menu icon. 1 Press the Point d d button to move the red arrow pointer to Computer 2, and then press the SET button.
37 Video Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the AV System Menu icon.
38 Video Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Select Menu icon. 1 2 Press the Point d d button to move the red frame pointer to the level that you want to set and then press the SET button.
39 Video Input Press the Point 7 8 button to adjust value. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Adjust Menu icon. 1 2 Press the Point d d button to move the red frame pointer to the item that you want to adjust and then press the SET button.
40 Video Input To store the adjustment data, move the red frame pointer to the Store icon and press the SET button. The message “OK?” will appear. Select [Yes] to store the adjustment data. To select this manual adjustment, select Custom by pressing the IMAGE button or through the Image Select Menu (p38).
41 Video Input This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Screen Menu icon.
42 Keystone Press the MENU button to display the On-Screen Menu. Press the Point 7 8 button to move the red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, or Japanese.
43 Setting Logo PIN code lock Dialog Box Quit Pointer Enter a Logo PIN code Select a number by pressing the Point 7 8 button and fix the number with the SET button.
44 Setting Terminal The RGB IN-2/ COMPONENT IN/ RGB OUT terminal on the back of the projector is switchable for computer input or monitor output. (See page 9) Select Computer 2 or Monitor Out with the Point 78 button. RGB IN-2 . . . . . . .computer input RGB Out .
45 Setting Lamp mode This function allows you to change brightness of the screen. Normal mode ···· normal brightness Auto mode ···· brightness according with the input signal Silent mode ···· lower brightness reduces the lamp power consumption and extends the lamp life.
46 Setting Select Spotlight or Pointer with the Point e e d d button and press the SET button. Then select size or pattern with the Point 7 8 button. Pointer You can emphasize a part of the projected image with this function. Choose either Spotlight or Pointer with the Point ed button and press the SET button.
47 Setting The PIN code can be changed to your desired four-digit number. Select "PIN code change" with the Point d d button, and press the SET button. The New PIN code input dialog box will appear. Select a number with the Point 7 8 button and fix the number with the SET button.
48 Setting This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace counter by using this function.
49 Maintenance & Cleaning The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance.
50 Maintenance and Cleaning Air Filter Pull up and remove. Turn off the projector, and disconnect the AC power cord from the AC outlet. Turn the projector upside down and remove the air filters by pulling the latches upward. 1 2 Air filters prevent dust from accumulating on the surface of the optical elements inside the projector.
51 Maintenance & Cleaning Maintenance and Cleaning Disconnect the AC power cord before cleaning. When the projector is not in use, replace the lens cover. 1 3 2 Follow these steps to clean the projection lens. Cleaning the Pr ojector Cabinet Disconnect the AC power cord before cleaning.
52 Maintenance and Cleaning When the life of the projection lamp of this projector draws to an end, the LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the lamp with a new one promptly. Follow these steps to replace the lamp.
53 Maintenance & Cleaning Maintenance and Cleaning Be sure to reset the lamp replace counter after the lamp is replaced. When the lamp replace counter is reset, the LAMP REPLACE indicator stops lighting. Move the pointer to Lamp counter reset and then press the SET button.
54 Tr oubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described in "Connecting to a Computer" and “Connecting to Video Equipment” on page17-19.
55 Appendix This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. Appendix The CE Mark is a Directive conformity mark of the European Community (EC).
56 Appendix Menu T ree System (1) MODE 1 MODE 2 SVGA 1 - - - - Auto PC Adj. Fine sync. Total dots Horizontal Vertical Current mode Clamp Display area Display area - H Display area - V Full screen Rese.
57 Appendix Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N V ideo Input Auto 1080i 1035i 720p 575p 480p 575i 480i Cinema Blackboard(Green) Custom Quit Normal Wide 0 - 63 0 - 63 0 - 63 0 - 63 Off Set ting I.
58 Appendix Check the indicators for projector condition. • • • lights green. • • • lights red. • • • off • • • blinks green. ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly.
59 Appendix Appendix Compatible Comput er Specifications LV-7225 / LV-7220 can basically accept the signal from all computers with the V, H-Frequency mentioned below and less than 140 MHz of Dot Clock. LV-5220 can basically accept the signal from all computers with the V, H-Frequency mentioned below and less than 100 MHz of Dot Clock.
60 Appendix Te c hnical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 11.81" x 3.23" x 8.94" (300mm x 82mm x 227mm) (Not including adjustable feet) Net Weight 6.48 lbs (2.9kgs) Feet Adjustment 0˚ to 11.
61 Appendix Appendix Model No. COMPONENT-VGA Cable : LV-CA32 SCART - VGA Cable : LV-CA31 (Not available in the U.S.A) Multi Card Imager Box : LV-MI01 Compact Flash Card : LV-WN03 Wired LAN Card : LV-W.
62 Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 SERVICE PORT CONNECTOR Appendix RGB INPUT/COMPONENT INPUT/RGB OUTPUT TERMINAL (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Vcc - Data .
63 Appendix Appendix Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code. While the projector is locked with the PIN code.
©CANON INC . 2004 YT1-1350 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, J apan CANON U.S.A., INC. One Canon Plaza, Lake Success , NY 11042-1198, U .S.A. CANON CANADA, INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada CANON LATIN AMERICA, INC.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Canon LV-5220 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Canon LV-5220 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Canon LV-5220, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Canon LV-5220 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Canon LV-5220, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Canon LV-5220.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Canon LV-5220. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Canon LV-5220 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
