Manuel d'utilisation / d'entretien du produit G1 du fabricant Canon
Aller à la page of 49
Operation guide Hi gh C ap a city Sta ck e r - G 1.
Copyright © 2014 by Canon Inc. All Rights Reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system without the prior written permission of Canon Inc.
Contents Chapter 1 Preface................................................................................................................................. 5 Notes for the reader.........................................................................
Contents 4 Canon High Capacity Stacker-G1.
Chapter 1 Preface.
Notes for the reader Introduction This manual helps you to use the High Capacity Stacker-G1 . The manual contains a description of the product and guidelines to use and operate the High Capacity Stacker-G1 . Definition Attention-Getters Parts of this manual require your special attention.
Chapter 2 Components and their functions.
Description of the main parts Illustration 1 7 4 10 9 3 2 8 6 5 [1] The main parts of High Capacity Stacker-G1 Main parts Part Description 1 Front door The front door gives access to the registration unit and the error locations A1-A7. 2 Front cover The front cover gives access to the flip rings and error location C1 (flip wheel).
Part Description 9 Eject tray The eject tray receives the stack from the stack tray. Then the eject tray moves horizontally out of the stacker. When the eject tray is outside the stacker, you can re- move the stack. In the meantime, the filling of the stack tray can continue.
Description of the stacker control panel Illustration A B C D E [2] The items of the stacker control panel Description of the stacker control panel Item Description A Filling level indicator (off, orange or red). B Stack height indicators. C Eject button.
Status Description 1 stack height indicator is lit. The stack tray contains at least 1 sheet. All stack height indicators are lit. The stack height comes close to the factory default value of 302 mm (11.9"). Stacks with a height of maximum 302 mm (11.
Description of the stacker control panel 12 Chapter 2 - Components and their functions Canon High Capacity Stacker-G1.
Chapter 3 Basic instructions.
Turn the stacker on The power switch is optional. If the switch is missing, the high capacity stacker is turned on automatically when the printer is turned on. CAUTION Never plug in the power plug while your hands are wet. Doing so creates the risk of electric shock.
Turn the stacker off The power switch is optional. If the switch is missing, the high capacity stacker is turned off automatically when the printer is turned off. CAUTION Never unplug the power plug while your hands are wet. Doing so creates the risk of electric shock.
Eject a stack manually Eject a stack When you press the eject button on the stack‐ er Then 1x The eject button on the stacker control panel blinks slowly (green). The stack will be ejected on the next possible set boundary. Then the filling of the stacker continues.
Chapter 4 Use the stacker (PRISMAsync).
Filling scenarios Filling scenarios Scenario Description Where to define the settings? Filling with default settings The stack tray is filled until the stack reaches the factory default height of 302 mm (11.9"). Then the stack is ejected. Next job, next tray Each new job is delivered to an empty stack tray.
Change the default stacker settings Introduction In the Settings Editor on the PRISMAsync controller, a key operator can define a number of default stacker settings ([Preferences] -> [Print job defaults] - [Stacker]). These settings are described below.
Setting Description [Maximum stack height] See the section 'Set the maximum stack height'. Procedure 1. Access the Settings Editor on the PRISMAsync controller. 2. Click [Preferences] - [Print job defaults]. 3. Scroll down to the [Stacker] section.
Set the maximum stack height Introduction The maximum stack height is 355 mm (14") or 3,000 sheets A4/LTR (80 g/m² / 20 lb bond). However, to guarantee a safe ejection of the stack, the factory default is set to 302 mm (11.9"). Depending on your needs, you can set the maximum stack height to a higher or lower value.
Set the minimum filling level Introduction NOTE The [Minimum filling level] setting is only applied when, on the printer control panel, the [Next output tray] setting is set to [When tray is full] (under [System] -> [Setup] -> [Workflow profile] -> [Output]).
Examples of using the [Maximum stack height] and the [Minimum filling level] settings Example 1 - Fill a box Assumption In the Settings Editor, the [Maximum stack height] setting is set to 302 mm (11.9"). In the Settings Editor, the [Minimum filling level] setting is set to 80%.
250 mm / 9.8” 250 mm / 9.8” 80% 80% Example 3 - Keep sets together Assumption In the Settings Editor, the [Maximum stack height] setting is set to 302 mm (11.9"). In the Settings Editor, the [Minimum filling level] setting is set to 80%. 1 job with a stack height of 100 mm (3.
302 mm / 1 1.9” 302 mm / 1 1.9” 80% 80% Example 5 - Two jobs exceed the maximum stack height Assumption In the Settings Editor, the [Maximum stack height] setting is set to 302 mm (11.9"). In the Settings Editor, the [Minimum filling level] setting is set to 80%.
Examples of using the [Maximum stack height] and the [Minimum filling level] settings 26 Chapter 4 - Use the stacker Canon High Capacity Stacker-G1.
Chapter 5 Troubleshooting.
Error location labels Introduction The stacker has various labels inside that indicate error locations. You can access these locations to remove error sheets or jammed paper.
Error location labels Chapter 5 - Troubleshooting 29 Canon High Capacity Stacker-G1.
Remove an error sheet from the internal error tray (A1) When to do A red LED lights up at the stacker control panel. Illustration [6] Indication at the stacker control panel Remove an error sheet from A1 Step Action Illustration 1 Open the front door.
Clear a paper jam in the input paper path (A2-A5) When to do A red LED lights up at the stacker control panel. Illustration [7] Indication at the stacker control panel Clear a paper jam at A2-A5 Step Action Illustration 1 Open the front door. 2 Turn A7 to remove jammed paper.
Step Action Illustration 4 Close the front door. Clear a paper jam in the input paper path (A2-A5) 32 Chapter 5 - Troubleshooting Canon High Capacity Stacker-G1.
Clear a paper jam in the input paper path of the registration unit (A6-A7) When to do A red LED lights up at the stacker control panel. Illustration [8] Indication at the stacker control panel Clear a paper jam at A6-A7 Step Action Illustration 1 Open the front door.
Step Action Illustration 3 Remove the jammed paper from A6. CAUTION If the lower input paper path of the registration unit also con‐ tains jammed paper, only au‐ thorized and trained persons are allowed to remove the jam‐ med paper. 4 Close the front door.
Clear a paper jam in the paper path (B1) When to do A red LED lights up at the stacker control panel. Illustration [9] Indication at the stacker control panel Clear a paper jam at B1 Step Action Illustration 1 Open the top cover. 2 Open B1 and remove the jammed paper.
Step Action Illustration 3 Close the top cover. CAUTION When you close the top cover, be careful not to get your fin‐ gers caught. Clear a paper jam in the paper path (B1) 36 Chapter 5 - Troubleshoo.
Clear a paper jam in the horizontal paper path (B2-B5) When to do A red LED lights up at the stacker control panel. Illustration [10] Indication at the stacker control panel Clear a paper jam at B2-B5 Step Action Illustration 1 Open the top cover. 2 Open B2, B3, B4 and B5 to remove the jammed paper.
Step Action Illustration 3 Close the top cover. CAUTION When you close the top cover, be careful not to get your fin‐ gers caught. Clear a paper jam in the horizontal paper path (B2-B5) 38 Chapter 5.
Clear a paper jam at the flip wheel (C1) When to do A red LED lights up at the stacker control panel. Illustration [11] Indication at the stacker control panel Clear a paper jam at C1 Step Action Illustration 1 Open the front cover. 2 Open C1 and remove the jammed paper from the flip wheel.
Clear a paper jam at the flip wheel (C1) 40 Chapter 5 - Troubleshooting Canon High Capacity Stacker-G1.
Chapter 6 Options.
Use the EasyLift to unload the stacker Introduction The optional EasyLift is a manual device that helps you to remove a stack of paper more easily. NOTE The EasyLift is delivered with a user guide. Refer to the EasyLift user guide for more information.
Step Action Illustration 2 When lifting, make sure to bend your knees and keep your back straight. CAUTION Do not lift more than 15 kg (33 lb) to avoid physical injuries. Please observe the national health and safety regulations in your country. 3 Lift the EasyLift to remove the paper from the eject tray.
Use the EasyLift to unload the stacker 44 Chapter 6 - Options Canon High Capacity Stacker-G1.
Appendix A Specifications.
Specifications Item Specification Paper size/weight/type Paper size (Top tray, stack tray, eject tray): A3, B4, A4R, A4, B5R, B5, A5R LGL, LTR, LTRR, STMTR, SRA3, EXEC, EXECR 11" x 17", 12" x 18", 13" x 19" Custom sizes: 140 mm x 182 mm - 330.
Index E Eject a stack manually As soon as possible......................................... 16 At the next set boundary................................. 16 Error sheet A1...................................................................... 30 Internal error tray.
Index 48 Canon High Capacity Stacker-G1.
CAN ON I NC . 30 - 2, Sh imo mar uko 3 - cho me, O hta -k u, T o k yo 1 46 - 85 01 , J apa n CAN ON U .S .A . , IN C. On e Can on Pa rk , Me lv il l e, NY 1 1 7 47 , U.S. A. CAN ON CA NA DA IN C. 63 90 D ix ie Ro ad Mi ssi ss aug a, O ntar io L 5T 1 P7 , C ana da CAN ON E URO P A N .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Canon G1 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Canon G1 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Canon G1, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Canon G1 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Canon G1, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Canon G1.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Canon G1. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Canon G1 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
