Manuel d'utilisation / d'entretien du produit AWN-USB-11N du fabricant Advantek Networks
Aller à la page of 22
Wireless – N USB Adapter User’s Manual Model # AWN-USB-11N2.
FCC Warning This equipment has been tested an d found to comply with the limits for a Class C digital device, pursuant to part 15 of the FCC Rules. Thes e limits are designe d to provide reasonable protection against harmful interference i n a re sidential installation.
2 IMPORTANT NOTE: In the event that these conditions canno t be me t (for example certain laptop configurations or co-location with another transmitter), then the FCC au thorization is no longer considered valid and the FCC ID cannot be used on the final produ ct.
Contents 1. INTRODUCTION ................................................................................................... 4 1.1 F EATURES ..................................................................................................
1. Introduction This is a wireless 11n USB Adapter that provid e s unsurpassed wireless pe rformance for your Desktop PC or Notebook. It complies with IEEE 802.11n draft 2.0 wireless stand ard and is backward compatible with IEEE 802.11b/g. This USB adapter provides better wireless reception and up to 150/300 Mbp s data transfer rates in 11n mo de.
2. Software Installation Note: The following installation was operated under Windows 7. (Procedures will be same for Windows Vista, XP and 2000 Operation System) Step1: Insert the Wireless USB adapter into the USB slot of your computer. The system will automatically find the device and search for its driver.
Step2: Insert Wireless USB Adapter Installation CD into CD-ROM drive then windo ws below will appear. Click Install Driver & Utility to begin device driver installation. Step3: Select the language for this installation from the choices belo w and click Nex t> to continue.
Step4: The InstallShield Wizard will install Wirele ss LAN Driver and Utility on your computer. For next step, click Next> to continue. Step5: Click I nstall begin the installation.
Step6: Please wait for a while for installing process. Step7: After Wizard has finished the installing, choose “ Ye s, I want to restart my computer now” before you can use the utility.
To check if Wireless PCI card is p roperly installed, you can right-cli ck Computer Æ choose Properties Æ click Device Manager . [Configuring Wireless Ne twork] Step 1: Open the Wireless Utility and go to “ Available Net work ” tab, double-click the netwo rk which you want to connect or click “ Add to Profile ” button to continue.
necessary. And click “ OK ” to continue. Step 3: In the “ Profile ” tab, you can see the ava ilable network is list ed. 10 Step 4: And now, you can browse your Internet Explorer to surfing the web.
11.
3. Wireless LAN Utility The Wireless LAN Utility is an app lication that helps you to c onfigure the USB Wireless LAN adapter and monitor the link status and stat istics during the comm unication process. 3.1 General In the “ General ”, you can immediately monitor the li nk status.
3.3 Available Network The “ Available Net work ” shows all Access Points, R outers or Adapters nearby when operating in Ad-Hoc mode. Click “ Refresh ” button to collect the SSID and Chann el in formation of all the wireless devices nearby.
network properties windows will display. You can confi gure your Wireless Network Security for the card. [Network Authen tication] -- Open System: No authentication is needed among t he wireless devices. -- Shared Key: Only Wirel ess device using a shared key (WEP Key identified ) is allowed to connecting each other.
[Data Encryption] -- Disabled: Disabl e the WEP Data Encryption. -- WEP: Enabled the WEP Data Encry ption. When the item is selected, you have to continu e setting the WEP Key Length & the key Index. -- TKIP: Enable the TKIP Data Encryption. When the item is selected, you have to continue setting the Network Key & Confirm network key.
receiving status. 3.6 Wi-Fi Protect Setup In the “ Wi-Fi Protect Setup ”, you can setup the Wi-Fi network more ea sily and secure. . There are two methods for you: Pin Input Config (PIN) Metho d & Push Button Con fig (PBC) Method ”. Select one of following metho ds to setup your AP.
configuration setup using PIN configu ration method or PBC configuration method thro ugh an internal or external Registrar. Pin Input Config (PIN): Start to add to Registra r using PIN configuration m ethod. IF STA Registrar, remember that enter PIN Co de read from you Enrollee before starting PIN.
You will see the basic configuration menu of the AP function: 4.2 General 18 SSID: The SSID is the uniqure name shared among all points in your wireless network. Th e name must be identical for all devices and points attempting to connect to the same netwo rk.
shows the current SSID se tting of the Wireless USB adapter. BSSID: It shows the current BSSID’s MAC address. AID: Raise value by current conn ection. MAC Address: The station MAC address of cu rrent connection Life Time: The status of current connection.
If you want to know detailed information about ho w your software access point works, you can view the statistics of the access point. You can click “ Reset ” button to reset all counters to zero. 4.5 ICS 20 The Internet Connection Sharing ( ICS ) function allows wireless clients to share a single internet connection.
21.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Advantek Networks AWN-USB-11N c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Advantek Networks AWN-USB-11N - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Advantek Networks AWN-USB-11N, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Advantek Networks AWN-USB-11N va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Advantek Networks AWN-USB-11N, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Advantek Networks AWN-USB-11N.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Advantek Networks AWN-USB-11N. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Advantek Networks AWN-USB-11N ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
