Manuel d'utilisation / d'entretien du produit 7585 du fabricant Canon
Aller à la page of 81
8VHU · V0DQXDO 08/ 7,0(',$ 352-(&7 25.
2 This Multimedia P rojector is designed with most advanced tec hnology for portability , durability , and ease of use. This projector utilizes built-in multimedia f eat ures, a palette of 1 .07 billion colors, and matrix liquid cr ystal display (LCD) tec hnology .
3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. T able of Contents Feat ur es and Design ................ 2 T able of Cont ents .................. 3 T o The Owner .
4 CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EX CEPT LAMP REPLACEMENT . REFER SERVICING T O QUALIFIED SER VICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGER OUS V OL T A GE CONSTITU TING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT .
5 All the saf et y and operating instructions should be read bef ore the product is operated. Read all of the instr uctions given here and ret ain them for later use. Unplug this projector from A C pow er supply before cleaning. Do not use liquid or aerosol cleaners.
6 Openings in the cabinet are provided f or ventilation. T o ensure reliable operation of the product and to protect it from ov erheating , these openings must not be bloc ked or co vered. CA UTION Hot air is exhausted from the e xhaust vent. When using or installing the projector , the following precautions should be taken.
7 Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, do wnward, or inclined position in perpendicular direction to the horizontal plane.
8 Moving the Projector Use the handle grip when moving the projector . Retract the adjustable f eet to prev ent damage to the lens and cabinet when carr ying. When this projector is not in use for an e xtended period, put it into a suitable case to protect the projector .
9 Compliance The A C P ower Cord supplied with this projector meets the requirement f or use in the countr y you purc hased it. AC P ow er Cord f or the United States and Canada: A C P ow er Cord used in the United St ates and Canada is listed by the Under writers Laboratories (UL) and certified by the Canadian Standard A ssociation (CSA).
10 < 8 G L Front D J H B Bottom Back D Indicat ors J T op Cov er 8 T op Cover Release But ton E Lens Cap CA UTION Hot air is exhausted from the e xhaust vent. Do not put heat-sensitiv e objects near this side.
11 Rear T erminal G R/C JA CK When using the wired remote control unit, connect the wired remote control unit to this jac k with a remote control cable (not supplied). Note: • Use a DVI-Digital cable which fits the width of the rear terminal.
12 J INPUT but ton Select an input source (pp.31–33). D PO WER button T urn the projector on or off (pp.23–24). 8 LENS but ton Enter the focus, z oom, and lens shif t adjustment mode (p.27). E P oint ! butt ons – Select an item or adjust the value in the On- Screen Menu (p.
13 D ST AND-B Y butt on T urn the projector off (p.24). E ON but ton T urn the projector on (p.23). G INPUT 1 – 3 but tons Select an input source (INPU T 1 – INPU T 3) (pp.31–33). L A UT O PC button A utomatically adjust the computer image to its optimum set ting (pp.
14 Remote Control Unit MENU butt on Open or close the On-Screen Menu (p.25). ZOOM ! but tons Zoom in and out the images (p.28). D-ZOOM button Select the Digital zoom +/- mode and resize the image (p.
15 Remote Control Battery Installation 12 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. Press the lid do wnward and slide it. T wo AAA size bat teries F or correct polarit y (+ and –), be sure bat ter y terminals are in contact with pins in the compartment.
16 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . Switc hing the remote control codes prev ents interf erence from other remote control units when several projectors or video equipment next to eac h other are operated at the same time.
17 AD JUST ABLE FEET Projection angle can be adjusted up to 6.5 degrees with the adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector , rot ate the both f eet cloc kwise. T o low er the projector or to retract the adjust able f eet, rot ate the both f eet countercloc kwise.
18 When replacing the lens or using an optional lens, install the lens by follo wing the instructions belo w . Ask the sales dealer for detailed information of the optional lens specifications.
19 NO TES ON LENS INST ALLA TION L Do not touc h or remov e any parts ex cept the lens and related parts. It may result in malfunctions, electrical shoc k, fire hazard or other accidents. L Bef ore inst alling or replacing the lens, c hec k that the Model No.
20 Monitor Output BNC cable Connecting to a Computer (Digital and Analog RGB) Monitor Output G B R H/V V D VI-Digit al cable VG A cable VG A cable USB cable USB port Unplug the pow er cords of both the projector and external equipment from the A C outlet before connecting cables.
21 RGB Scart 21 -pin Output Connecting to V ideo Equipment (V ideo, S-V ideo) S-video cable S-video Output Composite Video Y - Pb/Cb - Pr/Cr BNC cable Unplug the pow er cords of both the projector and external equipment from the A C outlet before connecting cables.
22 This projector uses nominal input v olt ages of 1 0 0–1 20 V or 20 0– 240 V A C and it automatically selects the correct input voltage. It is designed to work with single-phase po wer systems ha ving a grounded neutral conductor . T o reduce the risk of electrical shoc k, do not plug into any other type of pow er system.
23 T urning On the Projector Connect the projector’ s A C pow er cord into an A C outlet. The LAMP indicator lights red and the PO WER indicator lights green. Press the PO WER but ton on the side control or the ON but ton on the remote control unit.
24 Press the PO WER but ton on the side control or the ST AND-B Y but ton on the remote control unit, and “P ower of f?” appears on the screen. Press the PO WER but ton on the side control or the ST AND-B Y but ton on the remote control unit again to turn of f the projector .
25 Side Contr ol OK butt on How to Operate the On-Screen Menu MENU butt on OK butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, ref er to the respective sections in this manual.
26 Menu Bar For Computer Source For Video Source Same function as menu for Computer Source. Same function as menu for Computer Source. Guide Window Show the selected Menu of the On- Screen Menu.
27 Operating with Projector Control The f ollowing lens operation can be made with the L ens but ton on the side control. Press the LENS but ton to enter eac h lens operation mode. The selected adjustment displa y appears on the screen. Display “Lens shif t” on the screen.
28 Operating with Remote Control Unit Using the remote control unit for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control unit to freeze the pict ure on the screen.
29 Press the BLANK but ton on the remote control unit to blac k out the image. T o restore to normal, press the BLANK but ton again or press any other but ton. BLANK but ton FIL TER butt on Press and hold the FIL TER but ton for more than 5 seconds to operate electrically operated filter to replace the filter .
30 Pointer Function P ointer Note: • Y ou can choose the pattern of Pointer (Arrow/Cross/Dot) in the Set ting Menu (p. 52) Y ou can mov e the P ointer of the projector with the remote control unit to emphasize a part of the projected image. Press the POINTER but ton to activate the P ointer function.
31 Remote Contr ol Unit INPUT butt ons Input Press the INPU T 1, INPU T 2, or INPU T 3 but tons on the remote control unit. The input source appears on the screen as you press eac h but ton.
32 Computer Input Source Selection WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) Press the MENU but ton to display the On-Screen Menu. Use the P oint but tons to mov e the red frame pointer to the INPU T Menu icon. Use the P oint ! but tons to mov e the red arrow pointer to the desired input and then press the OK but ton.
33 When the video input signal is connected to the Y - Pb/Cb-Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video. When the video input signal is connected to the S- VIDEO jac k, select S-Video.
34 Computer System Selection This projector automatically t unes to various types of computers based on V GA, S V GA, XG A, SXGA, SXG A+, WXGA, or UXG A (ref er to “Compatible Computer Specifications” on pages 71–72).
35 Auto PC Adjustment A uto PC A djustment function is provided to automatically adjust Fine sync, T ot al dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to display the On-Screen Menu. Use the P oint but tons to move the red frame pointer to the PC A djust Menu icon.
36 Manual PC Adjustment Some computers employ special signal f ormats whic h may not be t uned by Multi-Scan system of this projector . Manual PC Adjustment enables y ou to precisely adjust sev eral parameters to matc h those special signal formats. The projector has 1 0 independent memor y areas to store those parameters manually adjusted.
37 Exit the PC A djust Menu. T o store the adjusted data, select Store and then press the OK but ton. Mov e the red arrow pointer to one of the Mode 1 to 1 0 in whic h you w ant to store, and then press the OK but ton. T o reset the adjusted data, select Reset and press the OK but ton.
38 Press the MENU but ton to display the On-Screen Menu. Use the P oint but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ! but tons to mov e the red frame pointer to the desired image lev el and then press the OK but ton.
39 Screen Size Adjustment Select the desired screen size that conf orms to the input signal source. Press the MENU but ton to display the On-Screen Menu.
40 Select Digital zoom +. The On-Screen Menu disappears and “D- zoom +” appears. P ress the OK but ton to expand the image size. Use the P oint ! but tons to pan the image. The P anning function can work only when the image is larger than the screen size.
41 A V S Y STEM MENU (VIDEO OR S-VIDEO) A V S Y STEM MENU (COMPONENT VIDEO) V ideo System Selection Press the MENU but ton to display the On-Screen Menu.
42 Press the MENU but ton to display the On-Screen Menu. Use the P oint but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ! but tons to mov e the red frame pointer to the desired image lev el and then press the OK but ton.
43 Screen Size Adjustment Press the MENU but ton to display the On-Screen Menu. Use the P oint but tons to mov e the red frame pointer to the Screen Menu icon. Use the P oint ! but tons to mov e the red frame pointer to the desired function and then press the OK but ton.
44 Ke ystone This function is used to store or reset the k eystone cor rection when the A C pow er cord is unplugged. Use the P oint but tons to switc h between eac h option. Store . . . Keep the k eystone cor rection even when the A C power cord is unplugged.
45 Press the MENU but ton to display the On-Screen Menu. Use the P oint but tons to mov e the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ! but tons to mov e the red frame pointer to the desired item and then press the OK but ton to display the adjustment dialog box.
46 A uto pict ure contr ol Use the P oint but tons to select the desired A uto picture control position (Of f , L1 or L2). Of f .... A uto pict ure control OFF position. L1 ..... A uto picture control LEVEL 1 position. L2 ..... A uto picture control LEVEL 2 position.
47 Use the P oint but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 1 5). Gamma Press the P oint but ton to decrease the sharpness of the image; press the P oint but ton to increase the sharpness of the image (from 0 to 31).
48 Press the MENU but ton to display the On-Screen Menu. Use the P oint but tons to mov e the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a vailable in English, German, F renc h, Italian, Spanish, P ortuguese, Dutc h, Sw edish, Russian, Chinese, K orean, or Japanese.
49 This function allo ws you to customize the screen logo with L ogo select, Capture, and L ogo PIN code loc k functions. Logo Note: • Before capturing an image, select “ Standard ” in the Image Select Menu to capture a proper image (pp. 38, 42).
50 Change the Log o PIN code lock set ting Af ter a correct Logo PIN code is entered, the follo wing dialog box appears. Use the P oint buttons to switc h On/Off , This function pre vents an unauthorized person from c hanging the screen logo.
51 Lamp mode Filter contr ol Choose the running speed of cooling f ans from the follo wing options. Normal ....... Operate in this mode under normal conditions. Max ........... Use this mode when you want to increase the cooling ef f ect when operating the projector in high ambient temperature en vironment.
52 On start When this function is set to “ On, ” the projector will be automatically turned on just b y connecting the A C power cord to the wall outlet. Note: • Be sure to turn off the projector properly (see “T urning Off the Projector” on page 24).
53 Secur ity Ke y lock Ke y lock Secur ity Select Ke y lock and this box appears. Choose one of the alternatives with the P oint ! buttons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation by unauthorized persons.
54 Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P AGE 76, AND KEEP IT SECUREL Y . IF Y OU FORGET Y OUR PIN CODE, THE PROJECTOR CAN NO L ONGER BE ST ARTED .
55 F actory def ault This function ret urns all set ting values ex cept for the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , and filter counter to the factory default set tings. F actory def ault Quit Exit the Set ting Menu. Select Factory default and this box appears.
56 Filter Instructions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef fectiv eness and may result in internal heat buildup and adversely af f ect the life of the projector .
57 T urn off the projector , and unplug the A C pow er cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Press S on the filter co ver to release the latc h and open the filter cov er . 3 Put the ne w one bac k into the position and close the filter cov er .
58 Be sure to reset the Scroll counter af ter replacing the filter cartridge. Press the MENU but ton to display the On-Screen Menu. Use the P oint but tons to mov e the red frame pointer to the Set ting Menu icon. Use the P oint ! but tons to mov e the red frame pointer to Filter counter and then press the OK but ton.
59 T urn of f the projector and unplug the A C power cord. L et the projector cool for at least 45 minutes. Loosen the scre w and open the lamp cover . Pull out the lamp by using the built in handle. 1 3 Replace the lamp with a ne w one. Make sure that the lamp is properly and fully inserted.
60 ORDER REPLACEMENT LAMP Replacement lamp can be ordered through y our dealer . When ordering , give the f ollowing information to the dealer . L Model No. of your pr ojector : L V -7585 L Replacement Lamp T ype No. : L V -LP29 Resetting the Lamp Counter Be sure to reset the Lamp counter af ter the lamp is replaced.
61 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. L Lamp lif etime may dif fer from lamp to lamp and according to the en vironment of use.
62 Unplug the A C power cord bef ore cleaning . Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blow er to clean the lens.
63 The W ARNING indicators show the state of the function whic h protects the projector . Chec k the st ate of the W ARNING indicators and the PO WER indicator to t ake proper maintenance. W arning Indicators The projector is shut down and the WARNING TEMP .
64 T roubleshooting Bef ore calling your dealer or ser vice center for assistance, c hec k the items below once again. 1 . Make sure you ha ve properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection.
65 W ARNING: High voltag es ar e used to operat e this project or . Do not at tempt t o open the cabinet. If problems still persist af ter follo wing all operating instructions, contact the dealer where you purc hased the projector or the ser vice center .
66 Menu T ree Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Network Video RGB Go to Syst em (2) Go to Syst em .
67 Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard High contrast Custom 1 Custom 1 0 Scr een Normal Tr u e Wide F ull screen Digital zoom + Digital zoom - PC Adjust Auto PC adj.
68 Computer Input/V ideo Input Setting Language Fan control Quit P osition/Simple Menu Blue/User/Blac k Logo select Capture Logo PIN code loc k Quit Auto mode/Normal mode /Eco 1 mode/Eco 2 mode Y es/No 1 2 languages provided.
69 Indicators and Projector Condition Chec k the indicators for the projector condition. Indicat ors Pr ojector Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e LAMP REPLA CE orang e The projector is of f . (The A C pow er cord is unplugged.
70 Indicat ors Pr ojector Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e LAMP REPLA CE orang e The projector has been cooled do wn enough and the temperature ret urns to normal. When turning on the projector , the W ARNING TEMP .
71 ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -Fr eq.(Hz) V GA 1 640x480 31 .470 59.880 V GA 2 720x400 31 .470 70.090 V GA 3 640x400 31 .470 70.090 V GA 4 640x480 37 .860 7 4.380 V GA 5 640x480 37 .860 72.81 0 V GA 6 640x480 37 .50 0 75.000 V GA 7 640x480 43.
72 ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -Fr eq.(Hz) D-V GA 640x480 31 .470 59.940 D-480p 720x480 31 .470 59.880 D-575p 720x575 31 .250 50.00 0 D-SV GA 800x600 37 .879 60.320 D-XGA 1 024x7 68 43.363 60.000 D-WXGA 1 1366x7 68 48.360 60.0 00 D-WXGA 2 1360x7 68 47 .
73 T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media Projector Dimensions (W x H x D) 1 4.57” x 7 .36” x 1 9.37” (370 mm x 187 mm x 492 mm) (Not including raised portions) Net Weight 28.7 lbs (1 3.0 kg) F eet Adjustment 0˚ to 6.
74 Optional Parts Lens Replacement The lens of this projector can be replaced with other optional lens. This f eature enables y ou to use the projector for wide v ariet y of uses. F or inst allation and replacement of the lens, al ways cont act the sales dealer .
75 Configurations of T erminals ANAL OG/ MONIT OR OUT (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V P ow er Horiz. sync.
76 Put the label belo w (supplied) on in a prominent place of the projector ’ s body while it is loc ked with a PIN code. While the projector is locked with the PIN code... Appendix When hanging the projector from the ceiling, the logo looks upside down.
77 Dimensions 3.94 (100) 14.57 (370) 5.75 (146) 17.32 (440) 13.58 (345) 4.13 (105) 5.20 (132) 4.33 (110) 4.33 (110) 7.36 (187) 6.5º MAX Screw Holes f or Ceiling Mount Screw: M6 Depth: 0.
78 Serial Control Interface Appendix This projector pro vides a function to control and monitor the projector's operations by using the R S-232C serial port. Connect a RS-232C serial cross cable to CONTR OL PORT on the projector and serial port on the PC.
79 The command is sent from PC to the projector with the format belo w; 'C' [Command] 'CR' Command: two c haractors (ref er to the command table below .
80 Status Read Command Appendix The command is sent from PC to the projector with the format belo w; 'CR' [Command] 'CR' Command: one c haracter (ref er to the command table below .
© C ANON INC . 2007 CANON INC. 30-2, Shimomar uko 3-chome , Ohta-ku, T okyo 146-8501, Japan CANON U .S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANAD A, INC. 6390 Dixie Road Mississauga, Ontar io L5T 1P7 Canada CANON LA TIN AMERICA, INC.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Canon 7585 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Canon 7585 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Canon 7585, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Canon 7585 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Canon 7585, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Canon 7585.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Canon 7585. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Canon 7585 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
