Manuel d'utilisation / d'entretien du produit InDesign CS4 du fabricant Adobe
Aller à la page of 490
.
.
iii Last updated 11/16/2011 Contents Chapter 1: What’s new What’s new (CS5.5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iv USING INDESIGN Contents Last updated 11/16/2011 Chapter 6: Styles Paragraph and character styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v USING INDESIGN Contents Last updated 11/16/2011 Chapter 12: Graphics Understanding graphics formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vi USING INDESIGN Contents Last updated 11/16/2011 Page transitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Last updated 11/16/2011 Chapter 1: What’s new Important: This page provides a list of features in InDesign CS5.5 and InDesign CS5. This page does NOT tell you how to use these features. For more information about any of the new features, click the corresponding links provided.
2 USING INDESIGN What’s new Last updated 11/16/2011 Object Export options Object export options are used to specify export parameters required when you export to different formats such as EPUB, HTML, or accessible PDFs. Object export options are applied to both text frames and graphic frames, as well as groups.
3 USING INDESIGN What’s new Last updated 11/16/2011 Paragraph Style dialog box with Export Tagging options See “ Map styles to export tags (CS5.5) ” on page 201 Integration with Adobe Digital Publishing Suite To create richly designed, interactive publications for tablet devices, InDesign includes Folio Builder and Overlay Creator panels.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
24 USING INDESIGN Workspace Last updated 11/16/2011 About view modes You can change the visibility of the document window using the Mode buttons at the bottom of the toolbox or by choosing commands from the View > Screen Mode menu.
25 USING INDESIGN Workspace Last updated 11/16/2011 • When you select text inside a frame, the Control panel displays either character or paragraph options. Click the paragraph and character icons on the left side of the Control panel to determine whether paragraph or character options are displayed.
26 USING INDESIGN Workspace Last updated 11/16/2011 • Choose Dock At Top, Dock At Bottom, or Float from the Control panel menu. Customize the Control panel 1 Choose Customize from the Control panel menu locatedd on the right side of the Control panel.
27 USING INDESIGN Workspace Last updated 11/16/2011 Open Documents As Tabs When this option is deselected, documents you create or open appear as floating windows rather than tabbed windows. Enable Floating Document Window Docking If this option is selected, you can dock floating documents with each other as tabbed windows.
28 USING INDESIGN Workspace Last updated 11/16/2011 2 Choose the menu set from the Set menu, and then click OK. Edit or delete a custom menu set 1 Choose Edit > Menus. 2 Choose the menu set from the Set menu, and then do one of the following: • To edit a menu set, change the visibility or color of menu commands, click Save, and then click OK.
29 USING INDESIGN Workspace Last updated 11/16/2011 More Help topics “ Default keyboard shortcuts ” on page 692 “ Scripting ” on page 649 Change the active shortcut set 1 If you want the shortcut set to be active for all documents, make sure that no documents are open.
30 USING INDESIGN Workspace Last updated 11/16/2011 6 In the Context list, select the context in which you want the keyboard shortcut to function. The context ensures that the shortcut performs the way you intended. For example, you can assign Ctrl+G to merge table cells (Table context) and Ctrl+G to insert special characters (Text context).
31 USING INDESIGN Workspace Last updated 11/16/2011 Open the Tool Hints panel (choose Window > Utilities > Tool Hints) to see which shortcut and modifier keys work with the selected tool. Display the toolbox ❖ Choose Window > Tools. Display tool options ❖ Double-click a tool in the toolbox.
32 USING INDESIGN Workspace Last updated 11/16/2011 Hidden tools menu Select tools temporarily 1 When one tool is selected, hold down the keyboard shortcut of a different tool. 2 With the keyboard shortcut still held down, perform an action. 3 Release the keyboard shortcut to return to the previous tool.
33 USING INDESIGN Workspace Last updated 11/16/2011 Gallery of selection tools More Help topics “ Selecting objects ” on page 402 Gallery of drawing and type tools Selection tool lets you select entire objects. Direct Selection tool lets you select points on a path or contents within a frame.
34 USING INDESIGN Workspace Last updated 11/16/2011 More Help topics “ Understanding paths and shapes ” on page 340 Gallery of transformation tools More Help topics “ Transforming objects ” on page 408 Erase tool lets you delete points on a path.
35 USING INDESIGN Workspace Last updated 11/16/2011 Gallery of modification and navigation tools Viewing the workspace Zoom in and out Use the Zoom tool or the Zoom commands to magnify the size of documents.
36 USING INDESIGN Workspace Last updated 11/16/2011 In Mac OS, you can display the zoom percentage in the status bar by hiding the application bar (Window > Application Bar). In Windows, you cannot hide the application bar. • To zoom in or out, press Alt (Windows) or Option (Mac OS) while using the mouse scroll wheel or sensor.
37 USING INDESIGN Workspace Last updated 11/16/2011 • Press Page Up or Page Down. • Use the mouse scroll wheel or sensor to scroll up and down. To pan left or right, press Ctrl (Windows) or Command (Mac OS) as you use the mouse scroll wheel or sensor.
38 USING INDESIGN Workspace Last updated 11/16/2011 • To close all windows for all open documents, press Shift+Ctrl+Alt+W (Windows) or Shift+Command+Option+W (Mac OS). Use anti-aliasing for smoothing edges Anti-aliasing smooths the jagged edges of type and bitmap images by softening the color transition between edge pixels and background pixels.
39 USING INDESIGN Workspace Last updated 11/16/2011 In the Control panel and the Transform panel, you can duplicate the selected object and apply the calculation to the duplicate (instead of the original). Enter the calculation and press Alt+Enter (Windows) or Option+Return (Mac OS).
40 USING INDESIGN Workspace Last updated 11/16/2011 For a video tutorial about using ConnectNow, see Using ConnectNow to share your screen (7:12) . (This demonstration is in Dreamweaver.
41 USING INDESIGN Workspace Last updated 11/16/2011 If you use the same page size and language for most of your documents, you can change these defaults with no document open. For example, to change the default page size, close all documents, choose File > Document Setup, and select a desired page size.
42 USING INDESIGN Workspace Last updated 11/16/2011 • Creating object styles. (See “ Object styles ” on page 213.) • Creating table and cell styles. (See “ Table and cell styles ” on page 307.) • Creating PDF export presets. (See “ Customize Adobe PDF presets ” on page 505.
43 USING INDESIGN Workspace Last updated 11/16/2011 3 Do one of the following: • To save the recovered data, choose File > Save As, specify a location and a new filename, and click Save. The Save As command keeps the recovered version that includes the automatically recovered data; the word [Recovered] disappears from the title bar.
44 Last updated 11/16/2011 Chapter 3: Layout For detailed information and instructions, click the links below. Creating documents For detailed information and instructions, click the links below.
45 USING INDESIGN Layout Last updated 11/16/2011 Facing Pages Select this option to make left and right pages face each other in a double-page spread , such as for books and magazines. Deselect this option to let each page stand alone, such as when you’re printing flyers or posters or when you want objects to bleed in the binding.
46 USING INDESIGN Layout Last updated 11/16/2011 Document and guides in Normal View Mode A. Spread (black lines) B. Page (black lines) C. Margin guides (magenta lines) D.
47 USING INDESIGN Layout Last updated 11/16/2011 Create a document using a preset 1 Do one of the following:. • Choose File > Document Preset > [name of preset] . (Hold down Shift while choosing the preset to create a new document based on the preset without opening the New Document dialog box.
48 USING INDESIGN Layout Last updated 11/16/2011 Change document setup, margins, and columns After you create a document, you may change your mind about how you want it set up. For example, you may want single pages instead of facing pages, or you may want to change the page size or margin settings.
49 USING INDESIGN Layout Last updated 11/16/2011 Dragging a column guide to create unequal column widths To create columns with unequal gutters, create evenly spaced ruler guides and then drag individual guides to the desired location. (See “ Create ruler guides ” on page 56.
50 USING INDESIGN Layout Last updated 11/16/2011 Vertical ruler using inches (left), and custom 12-point increments (right) Setting custom ruler increments in the vertical ruler is useful for lining up a ruler’s major tick marks with a baseline grid.
51 USING INDESIGN Layout Last updated 11/16/2011 Baseline Shift Controls the increment for shifting the baseline using the keyboard shortcuts. Kerning/Tracking Controls the increment for kerning and tracking using the keyboard shortcuts.
52 USING INDESIGN Layout Last updated 11/16/2011 Adjust the zero point When you move the zero point, it moves to the same relative location in all spreads. For example, if you move the zero point to the top left corner of the second page of a page spread, it will appear in that position on the second page of all other spreads in the document.
53 USING INDESIGN Layout Last updated 11/16/2011 After you use the Measure tool to measure an item, the line or lines remain visible until you take another measurement or select a different tool. Measure the distance between two points 1 Make sure the Info panel is visible (Window > Info).
54 USING INDESIGN Layout Last updated 11/16/2011 The Info panel displays the number of words and characters in the story or the selected text. If any text is overset, a “+” sign appears, followed by a number representing the overset characters, words, or lines.
55 USING INDESIGN Layout Last updated 11/16/2011 You can set up a baseline grid for a frame by using the Text Frame Options. (See “ Change text frame properties ” on page 131.) 1 Choose Edit > Preferences > Grids (Windows) or InDesign > Preferences > Grids (Mac OS).
56 USING INDESIGN Layout Last updated 11/16/2011 5 Do one of the following, and click OK: • To put the document and baseline grids behind all other objects, make sure that Grids In Back is selected. • To put the document and baseline grids in front of all other objects, deselect Grids In Back.
57 USING INDESIGN Layout Last updated 11/16/2011 Guides in the document window A. Spread guide B. Page guide More Help topics “ Layers ” on page 78 “ Customize the pasteboard and guides ” on p.
58 USING INDESIGN Layout Last updated 11/16/2011 Create a set of evenly spaced page guides 1 If the document contains multiple layers, click a layer name in the Layers panel to target the layer. 2 Choose Layout > Create Guides. 3 For Number, type a value to specify the number of rows or columns you want to create.
59 USING INDESIGN Layout Last updated 11/16/2011 Select ruler guides Unselected ruler guides appear light blue by default. Selected ruler guides are highlighted in their layer color. When a guide is selected, the Reference Point icon in the Control panel changes to or , representing the selected guide.
60 USING INDESIGN Layout Last updated 11/16/2011 You can set the current magnification as the view threshold for new ruler guides by pressing Alt (Windows) or Option (Mac OS) as you drag the ruler guides you’ve selected.
61 USING INDESIGN Layout Last updated 11/16/2011 Note: The Snap To Guides command controls both snapping to guides and snapping to the baseline grid. 2 To specify the snap-to zone, choose Edit > Pr.
62 USING INDESIGN Layout Last updated 11/16/2011 Tips for using Smart Guides ❖ Smart Guides take effect only on page items and intersections that are in the current page view. If you have many objects on a page and are trying to align an object to another object or objects in particular, zoom in on that area specifically.
63 USING INDESIGN Layout Last updated 11/16/2011 • Select Show Vertically to display spreads in one vertical column. Deselect this option to allow spreads to be displayed side-by-side. • Select Show Thumbnails to display thumbnail representations of the content of each page or master.
64 USING INDESIGN Layout Last updated 11/16/2011 Create color labels for page thumbnails You can assign colored labels to the page thumbnails in the Pages panel.
65 USING INDESIGN Layout Last updated 11/16/2011 Duplicate a page or spread ❖ In the Pages panel, do one of the following: • Drag the page range numbers under a spread to the New Page button.
66 USING INDESIGN Layout Last updated 11/16/2011 4 Choose the destination document name from the Move To menu. 5 For Destination, choose where you want to move the pages, and specify a page if necessary. 6 If you want to remove the pages from the original document, select Delete Pages After Moving.
67 USING INDESIGN Layout Last updated 11/16/2011 Adding a page to a spread using the Pages panel Note: You can include up to ten pages in a spread. When you have reached the limit, the black vertical bar will not appear.
68 USING INDESIGN Layout Last updated 11/16/2011 Rotating the spread A. Before rotating spread B. Rotated spread view C. Rotate icon in Pages panel For a video tutorial on rotating the spread view, see www.adobe.com/go/lrvid4031_id . 1 In the Pages panel, select the page or spread that you want to rotate.
69 USING INDESIGN Layout Last updated 11/16/2011 When transforming objects, keep in mind that you’re working on a rotated page view. For example, if you’re editing a table on a rotated spread view, changing the “left” side of the table will change what appears to be the top of the table in the rotated view.
70 USING INDESIGN Layout Last updated 11/16/2011 Orientation Select a landscape or portrait page orientation. Enable Layout Adjustment Select this option if you want the objects on the page to be adjusted automatically when the page size changes. See “ About automatic layout adjustment ” on page 86.
71 USING INDESIGN Layout Last updated 11/16/2011 Master items (top left) appear behind page objects on the same layer (bottom left); moving a master item to a higher layer (top right) moves it in front of all objects on lower layers (bottom right).
72 USING INDESIGN Layout Last updated 11/16/2011 • For Number Of Pages, type a value for the number of pages you want in the master spread (as many as ten). Create a master from an existing page or spread • Drag an entire spread from the Pages section of the Pages panel to the Masters section.
73 USING INDESIGN Layout Last updated 11/16/2011 Edit the layout of a master You can edit the layout of master pages at any time; changes you make are automatically reflected on all pages with that master applied. For example, any text or graphic you add to a master will appear on document pages to which the master is applied.
74 USING INDESIGN Layout Last updated 11/16/2011 Applying a master to a page (left) and applying a master to a spread (right) Apply a master to multiple pages ❖ Do one of the following: • In the Pages panel, select the pages to which you want to apply a new master.
75 USING INDESIGN Layout Last updated 11/16/2011 Copy or move a master to another document 1 Open the document you want to add the master to. Then open the document with the master you want to copy.
76 USING INDESIGN Layout Last updated 11/16/2011 Override a master item 1 Make sure the master item can be overridden. You can override a master item only if Allow Master Item Overrides On Selection is selected in the Pages panel menu for that item.
77 USING INDESIGN Layout Last updated 11/16/2011 • To remove all master overrides from a spread, in the Pages panel, target the spread (or master spread) from which you want to remove all master overrides. Choose Edit > Deselect All to make sure that no objects are selected.
78 USING INDESIGN Layout Last updated 11/16/2011 Layers About layers Each document includes at least one named layer. By using multiple layers, you can create and edit specific areas or kinds of content in your document without affecting other areas or kinds of content.
79 USING INDESIGN Layout Last updated 11/16/2011 More Help topics “ Show or hide frame edges ” on page 85 Create layers 1 Choose Window > Layers. 2 To create a new layer, do any of the following: • To create a new layer above the selected layer, click the New Layer button.
80 USING INDESIGN Layout Last updated 11/16/2011 Add objects to layers Any new object is placed on the target layer , the layer currently displaying the pen icon in the Layers panel.
81 USING INDESIGN Layout Last updated 11/16/2011 Dragging objects from one layer to another • To select all objects on a specific layer, hold down Alt (Windows) or Option (Mac OS) as you click a layer in the Layers panel.
82 USING INDESIGN Layout Last updated 11/16/2011 2 Select objects and choose Edit > Copy or Edit > Cut. 3 In the Layers panel, click the other layer to target it. 4 Choose Edit > Paste. Duplicate a layer When you duplicate a layer, you copy its contents and settings.
83 USING INDESIGN Layout Last updated 11/16/2011 By default, text continues to wrap around objects on hidden layers. To ignore text wrap settings for hidden objects, choose Layer Options from the Layers panel menu, and then select the Suppress Text Wrap When Layer Is Hidden option.
84 USING INDESIGN Layout Last updated 11/16/2011 • To delete multiple layers, hold Ctrl (Windows) or Command (Mac OS) while you click the layers to select them. Then drag the layers from the Layers panel to the Delete icon or choose Delete Layers from the Layers panel menu.
85 USING INDESIGN Layout Last updated 11/16/2011 Because a frame is just a container version of a path, you can do anything to a frame that you can do to a path, such as add a color or a gradient to its fill or stroke, or edit the shape of the frame itself with the Pen tool.
86 USING INDESIGN Layout Last updated 11/16/2011 Types of placeholders A. Graphics frame placeholder B. Text frame placeholder For example, you might use any of these strategies: • Draw text frames using the Type tool, and draw graphics frames using the drawing tools.
87 USING INDESIGN Layout Last updated 11/16/2011 The Layout Adjustment feature produces more predictable results when a layout is tightly based on a framework of margins, page columns, and ruler guides, and where objects are snapped to guides.
88 USING INDESIGN Layout Last updated 11/16/2011 Layout Adjustment options Enable Layout Adjustment Select this option so that layout adjustment will occur whenever you change page size, page orientation, margins, or columns.
89 USING INDESIGN Layout Last updated 11/16/2011 3 In the page number text frame, add any text that will come before or after the page number (such as “Page “). 4 Position the insertion point where you want the page number to appear, and then choose Type > Insert Special Character > Markers > Current Page Number.
90 USING INDESIGN Layout Last updated 11/16/2011 A single InDesign document can contain up to 9,999 pages, but page numbers can be as large as 99,999. (For example, you can correctly number a 100-page document that starts on page 9,949.) By default, the first page is a recto (right) page numbered 1.
91 USING INDESIGN Layout Last updated 11/16/2011 Define section numbering By default, page and chapter numbers in a book are numbered consecutively. Using Numbering & Section Options, you can restart page numbering at a specified page, add prefixes to page numbers, and change the numbering style of both pages and chapters.
92 USING INDESIGN Layout Last updated 11/16/2011 Display absolute or section numbering in the Pages panel The Pages panel can display absolute numbering (labeling all pages with consecutive numbers, starting at the first page of the document) or section numbering (labeling pages by section, as specified in the Section Options dialog box).
93 USING INDESIGN Layout Last updated 11/16/2011 Section prefix in document window A. Section prefix in the page box at the bottom of the document window B. Section marker and prefix on the page itself Style (Document Chapter Numbering) Choose a chapter-numbering style from the menu.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
292 USING INDESIGN Tables Last updated 11/16/2011 You can also copy and paste tabbed text across a selection of table cells. This technique is a great way to replace content while preserving formatting. For example, suppose you want to update the content of a formatting table in a monthly magazine.
293 USING INDESIGN Tables Last updated 11/16/2011 You can add header and footer rows when you create the table. You can also use the Table Options dialog box to add header and footer rows and change how they appear in the table. You can convert body rows to header or footer rows.
294 USING INDESIGN Tables Last updated 11/16/2011 Selecting and editing tables Select table cells, rows, and columns When you select part or all of the text in a cell, that selection has the same appearance as would text selected outside a table. However, if the selection spans more than one cell, the cells and their contents are both selected.
295 USING INDESIGN Tables Last updated 11/16/2011 Before and after selecting table • Drag the Type tool across the entire table. You can also select a table in the same way you select an anchored gr.
296 USING INDESIGN Tables Last updated 11/16/2011 Insert a row or column by dragging When adding columns, if you drag more than one and one-half times the width of the column being dragged, new columns are added that have the same width as the original column.
297 USING INDESIGN Tables Last updated 11/16/2011 More Help topics “ Keys for tables ” on page 695 Move within a table using Tab • Press Tab to move to the next cell. If you press Tab in the last table cell, a new row is created. For information on inserting tabs and indents in a table, see “ Format text within a table ” on page 301.
298 USING INDESIGN Tables Last updated 11/16/2011 2 Choose Table > Convert Table To Text. 3 For both Column Separator and Row Separator, specify the separators you want to use. For best results, use a different separator for columns and rows, such as tabs for columns and paragraphs for rows.
299 USING INDESIGN Tables Last updated 11/16/2011 Editing tables in Story Editor A. Table icon B. Overset text C. Overset graphic • To expand or collapse the table in Story Editor, click the triangle to the left of the table icon at the top of the table.
300 USING INDESIGN Tables Last updated 11/16/2011 More Help topics “ Table strokes and fills ” on page 304 Creating and Formatting Tables video Resize columns, rows, and tables You can resize columns, rows, and tables using a number of different methods.
301 USING INDESIGN Tables Last updated 11/16/2011 Note: If the table spans more than one frame in a story, you cannot use the pointer to resize the entire table. Distribute columns and rows evenly 1 Select cells in the columns or rows that should be the same width or height.
302 USING INDESIGN Tables Last updated 11/16/2011 Insert tabs into a table cell When the insertion point is in a table, pressing Tab moves the insertion point to the next cell. However, you can insert a tab within a table cell. Use the Tabs panel to define tab settings in the table.
303 USING INDESIGN Tables Last updated 11/16/2011 Merge cells You can combine two or more cells in the same row or column into a single cell. For example, you can merge the cells in the top row of the table to create a single cell to be used for the table title.
304 USING INDESIGN Tables Last updated 11/16/2011 Table strokes and fills About table strokes and fills You can add strokes and fills to your tables in a number of ways. Use the Table Options dialog box to change the stroke of the table border, and to add alternating strokes and fills to columns and rows.
305 USING INDESIGN Tables Last updated 11/16/2011 2 Choose Table > Cell Options > Strokes And Fills. 3 In the proxy preview area, specify which lines will be affected by stroke changes. For example, if you want to add a heavy stroke to the outside lines but not to the inside lines of the selected cells, click an inside line to deselect it.
306 USING INDESIGN Tables Last updated 11/16/2011 Add diagonal lines to a cell 1 Using the Type tool , place the insertion point in or select the cell or cells in which you want to add diagonal lines. 2 Choose Table > Cell Options > Diagonal Lines.
307 USING INDESIGN Tables Last updated 11/16/2011 2 For Alternating Pattern, select the type of pattern you want to use. Select Custom if you want to specify a pattern; for example, one column with a thick black line followed by three columns with thin yellow lines.
308 USING INDESIGN Tables Last updated 11/16/2011 Using cell styles in table styles When you create a table style, you can specify which cell styles are applied to different regions of the table: header and footer rows, left and right columns, and body rows.
309 USING INDESIGN Tables Last updated 11/16/2011 Change how styles are listed in the panel • Select Small Panel Rows to display a condensed version of the styles. • Drag the style to a different position. You can also drag styles to groups that you create.
310 USING INDESIGN Tables Last updated 11/16/2011 3 In the Load Styles dialog box, make sure that a check mark appears next to the styles you want to import.
311 USING INDESIGN Tables Last updated 11/16/2011 Edit table and cell styles One of the advantages of using styles is that when you change the definition of a style, all of the tables or cells formatted with that style change to match the new style definition.
312 USING INDESIGN Tables Last updated 11/16/2011 Override table and cell styles After you apply a table or cell style, you can override any of its settings.
313 Last updated 11/16/2011 Chapter 10: Long document features Creating book files Create a book file A book file is a collection of documents that can share styles, swatches, master pages, and other items. You can sequentially number pages in booked documents, print selected documents in a book, or export them to PDF.
314 USING INDESIGN Long document features Last updated 11/16/2011 More Help topics “ Synchronize book documents ” on page 315 Manage book files Each open book file appears on its own tab in the Book panel. If multiple books are open at the same time, click a tab to bring that book to the front and access its panel menu.
315 USING INDESIGN Long document features Last updated 11/16/2011 Open a book file in Explorer or Finder 1 In the books panel, select a document. 2 From the books panel menu, choose Reveal In Explorer (Windows) or Reveal In Finder (Mac OS). A browser window opens that displays the selected file.
316 USING INDESIGN Long document features Last updated 11/16/2011 Selected style source 2 Make sure that the items you want copied from the style source are selected in the Synchronize Options dialog box. 3 In the Book panel, select the documents you want to synchronize with the style source document.
317 USING INDESIGN Long document features Last updated 11/16/2011 Convert documents in a book file 1 Open the book file in InDesign CS5. 2 In the Book panel menu: • If you want the original documents to be overwritten during conversion, select Automatic Document Conversion.
318 USING INDESIGN Long document features Last updated 11/16/2011 Change page and chapter numbering options for each document 1 Select the document in the Book panel. 2 Choose Document Numbering Options in the Book panel menu, or double-click the document’s page numbers in the Book panel.
319 USING INDESIGN Long document features Last updated 11/16/2011 Print or output a book file One advantage of using a book file is that you can use a single command to output—for print, preflight, package, or export to EPUB or PDF—selected booked documents or the entire book.
320 USING INDESIGN Long document features Last updated 11/16/2011 • You can create paragraph styles for the table of contents’ title and entries, including tab stops and leaders, if desired. You can then apply these paragraph styles when you generate the table of contents.
321 USING INDESIGN Long document features Last updated 11/16/2011 If paragraphs that are to be included in the table of contents appear in different stories on the same page, their order in the TOC is determined by their position on the page.
322 USING INDESIGN Long document features Last updated 11/16/2011 Create a TOC style 1 Choose Layout > Table Of Contents Styles. 2 Click New. 3 Type a name for the TOC style you are creating. 4 In the Title box, type a title for your TOC (such as Contents or List of Figures ).
323 USING INDESIGN Long document features Last updated 11/16/2011 You can specify a character that separates an entry and page number, as well as a style to apply to a character. Sort Entries in Alphabetical Order Select this option to sort table of contents entries in the selected style alphabetically.
324 USING INDESIGN Long document features Last updated 11/16/2011 Table of contents with dot leaders 1 Create a paragraph style with a tab leader. (See “ Create a paragraph style with a tab leader ” on page 324.) 2 To update the table of contents settings, do one of the following: • Choose Layout > Table Of Contents Style.
325 USING INDESIGN Long document features Last updated 11/16/2011 Update a table of contents 1 Open the document containing the table of contents. 2 Do any of the following: • To make changes to table of contents entries, edit your document or booked documents, not the table of contents story itself.
326 USING INDESIGN Long document features Last updated 11/16/2011 For a video tutorial on creating an index, see www.adobe.com/go/vid0220 . Tips for creating an index Creating a well-planned and complete index can help make the information in your document immediately accessible to your readers.
327 USING INDESIGN Long document features Last updated 11/16/2011 The following codes appear in place of page references to indicate index entries that may not be included in the generated index. You may need to choose Update Preview in the Index panel to view the codes.
328 USING INDESIGN Long document features Last updated 11/16/2011 Creating a topic list before you add index entries is optional. Each time you create an index entry, its topic is automatically added to the topic list for future use.
329 USING INDESIGN Long document features Last updated 11/16/2011 Index panel in Reference mode A. Entry B. Subentry C. Page reference D. Cross-reference An index marker is inserted at the beginning of the word in which text is selected or at the insertion point.
330 USING INDESIGN Long document features Last updated 11/16/2011 Index entry in the Topic Levels box (left) and resulting appearance in the Index (right) • Double-click any topic in the list box at the bottom of the dialog box. 7 To change the way an entry is sorted in the final index, use the Sort By boxes.
331 USING INDESIGN Long document features Last updated 11/16/2011 To prepare a list for indexing, separate each item you want to be indexed with any of the following: a return, a soft return (Shift + Return key), a tab, a right-indent tab (Shift + Tab), a semicolon, or a comma.
332 USING INDESIGN Long document features Last updated 11/16/2011 Edit an index entry To change a topic (such as renaming it or applying a new sort order) and automatically update all entries that use that topic, use the Index panel in Topic mode. To change one entry at a time, use Reference mode.
333 USING INDESIGN Long document features Last updated 11/16/2011 Two types of cross-references A. Cross-reference to related information (See also) B. Cross-reference to an equivalent term (See) When you create a cross-reference in InDesign, you can also select a cross-reference prefix.
334 USING INDESIGN Long document features Last updated 11/16/2011 For a video tutorial on creating an index, see www.adobe.com/go/vid0220 . 1 Do one of the following: • If you’re creating an index for a single document, you may want to add a new page at the end of the document.
335 USING INDESIGN Long document features Last updated 11/16/2011 Include Index Section Headings Select this option to generate section headings consisting of alphabet characters (A, B, C, and so on) representing the section that follows.
336 USING INDESIGN Long document features Last updated 11/16/2011 2 Make sure the items you want sorted are selected. 3 To determine the type of language script used, click the item under Header Type and choose a different option from the menu. For example, for Cyrillic, you can choose Russian, Belarusian, Bulgarian, or Ukrainian.
337 USING INDESIGN Long document features Last updated 11/16/2011 to open either the Pinyin Entry dialog box or Stroke Count Entry dialog box. You can edit the fields and click OK.
338 USING INDESIGN Long document features Last updated 11/16/2011 3 Choose Go To Selected Marker in the Index panel menu. The insertion point appears to the right of the index marker. You can then press Shift+Left Arrow to select the marker for cutting, copying, or deleting.
339 USING INDESIGN Long document features Last updated 11/16/2011 Select markers 1 Choose Type > Show Hidden Characters. 2 Place the insertion point next to the marker. 3 Holding down Shift, press the Left Arrow or Right Arrow key to select a marker.
340 Last updated 11/16/2011 Chapter 11: Drawing Understanding paths and shapes Types of paths and shapes You can create paths and combine them in a variety of ways in InDesign. InDesign creates the following types of paths and shapes: Simple paths Simple paths are the basic building blocks of compound paths and shapes.
341 USING INDESIGN Drawing Last updated 11/16/2011 Components of a path A. Selected (solid) endpoint B. Selected anchor point C. Unselected anchor point D. Curved path segment E. Direction line F. Direction point Paths can have two kinds of anchor points: corner points and smooth points.
342 USING INDESIGN Drawing Last updated 11/16/2011 About direction lines and direction points When you select an anchor point that connects curved segments (or select the segment itself), the anchor points of the connecting segments display direction handles , which consist of direction lines that end in direction point s.
343 USING INDESIGN Drawing Last updated 11/16/2011 Drawing with the line or shape tools Draw basic lines and shapes 1 In the toolbox, do one of the following: • To draw a line or shape, select the Line tool , the Ellipse tool , the Rectangle tool , or the Polygon tool .
344 USING INDESIGN Drawing Last updated 11/16/2011 • Hold down Ctrl (Windows) or Command (Mac OS) and press arrow keys to change the spacing between the frames.
345 USING INDESIGN Drawing Last updated 11/16/2011 Anchor points are set down as you draw with the Pencil tool; you do not determine where they are positioned.
346 USING INDESIGN Drawing Last updated 11/16/2011 4 After you begin dragging, hold down Ctrl (Windows) or Command (Mac OS). The Pencil tool displays a small merge symbol to indicate you’re adding to the existing path. 5 Drag onto the endpoint of the other path, release the mouse button, and then release the Ctrl or Command key.
347 USING INDESIGN Drawing Last updated 11/16/2011 Drawing with the Pen tool Draw straight line segments with the Pen tool The simplest path you can draw with the Pen tool is a straight line, made by clicking the Pen tool to create two anchor points.
348 USING INDESIGN Drawing Last updated 11/16/2011 The first anchor point appears, and the Pen tool pointer changes to an arrowhead. (In Photoshop, the pointer changes only after you’ve started dragging.) 3 Drag to set the slope of the curve segment you’re creating, and then release the mouse button.
349 USING INDESIGN Drawing Last updated 11/16/2011 5 Continue dragging the Pen tool from different locations to create a series of smooth curves. Note that you are placing anchor points at the beginning and end of each curve, not at the tip of the curve.
350 USING INDESIGN Drawing Last updated 11/16/2011 Drawing a straight segment followed by a curved segment (part 1) A. Straight segment completed B. Positioning Pen tool over endpoint (the Convert Point icon appears only in Illustrator and InDesign) C.
351 USING INDESIGN Drawing Last updated 11/16/2011 Drawing a curved segment followed by a straight segment (part 2) C. Positioning Pen tool over existing endpoint D. Clicking endpoint E. Clicking next corner point Draw two curved segments connected by a corner 1 Using the Pen tool, drag to create the first smooth point of a curved segment.
352 USING INDESIGN Drawing Last updated 11/16/2011 • (Illustrator only) Select the Lasso tool, and drag around the anchor points. Shift-drag around additional anchor points to select them.
353 USING INDESIGN Drawing Last updated 11/16/2011 Adjust the position or shape of curved segments 1 With the Direct Selection tool, select a curved segment, or an anchor point on either end of the curved segment. Direction lines appear, if any are present.
354 USING INDESIGN Drawing Last updated 11/16/2011 Note: In Illustrator, if you extend a path that ends in a smooth point, the new segment will be straight. • To create a smooth point, position the Pen tool where you want to end the new curved segment, and drag.
355 USING INDESIGN Drawing Last updated 11/16/2011 2 Select the Pen tool, the Add Anchor Point tool, or the Delete Anchor Point tool. 3 To add an anchor point, position the pointer over a path segment and click. To delete an anchor point, position the pointer over an anchor point and click.
356 USING INDESIGN Drawing Last updated 11/16/2011 Clicking smooth point to create corner point • To convert a corner point without using direction lines to a corner point with independent direction lines, first drag direction lines out of a corner point (making it a smooth point).
357 USING INDESIGN Drawing Last updated 11/16/2011 Split a path using the Scissors tool 1 (Optional) Select the path to see its current anchor points. 2 Select the Scissors tool and click the path where you want to split it.
358 USING INDESIGN Drawing Last updated 11/16/2011 • Hold down Shift as you click the anchor points you want to select. 2 Position the pointer over the anchor point or path segment that you want to act as a focal point (that is, a point that pulls the selected path segments), and click the anchor point or path segment.
359 USING INDESIGN Drawing Last updated 11/16/2011 Note: If you want to change the stroke’s color, use the toolbox and Swatches panel. See “ Apply color ” on page 465.
360 USING INDESIGN Drawing Last updated 11/16/2011 • Start and end shapes are sized in proportion to the stroke weight. However, adding a start or end shape does not change the length of the path. • Start and end shapes automatically rotate to match the angle of an endpoint’s direction line.
361 USING INDESIGN Drawing Last updated 11/16/2011 4 Enter a name for the stroke style. 5 For Type, select one of the following: • Dash to define a style with dashes spaced at regular or varying intervals. • Striped to define a style with one or more parallel lines.
362 USING INDESIGN Drawing Last updated 11/16/2011 Save custom stroke styles You can save custom stroke styles for use in other InDesign documents. Save a custom stroke style 1 In the Stroke panel menu, choose Stroke Styles. 2 Select a custom stroke style and click Save.
363 USING INDESIGN Drawing Last updated 11/16/2011 Use Live Corners With Live Corners, you can apply corner effects to rectangular frames by clicking the yellow box that appears on the frame and dragging. In addition, you can apply a different corner effect and a different corner radius to each corner.
364 USING INDESIGN Drawing Last updated 11/16/2011 • Apply a gradient, or add contents that span multiple paths. Although you can also apply a gradient across multiple objects using the Gradient tool, applying a gradient to a compound path is often a better method because you can later edit the entire gradient by selecting any of the subpaths.
365 USING INDESIGN Drawing Last updated 11/16/2011 You can fill a hole created by a subpath or turn a subpath into a hole. Using the Direct Selection tool, select a point on the subpath you want to change. Then select Object > Paths > Reverse Path or click Reverse Path in the Pathfinder panel.
366 USING INDESIGN Drawing Last updated 11/16/2011 Pathfinder panel A. Original objects B. Add C. Subtract D. Intersect E. Exclude Overlap F. Minus Back Add Traces the outline of all objects to create a single shape. Subtract Objects in the front “punch holes” in the backmost object.
367 USING INDESIGN Drawing Last updated 11/16/2011 Gradient applied to a compound shape (left) compared to gradient applied to one part of the compound shape (right) 1 Choose Window > Object & Layout > Pathfinder to open the panel. 2 Select the objects you want to combine in a compound shape.
368 USING INDESIGN Drawing Last updated 11/16/2011 Working with text outlines A. Type character before conversion to text outline B. Text outline with image pasted into it C.
369 Last updated 11/16/2011 Chapter 12: Graphics Understanding graphics formats Choosing the right graphics format InDesign can import a wide range of graphics file formats. Consult with the service providers who will help you produce your document to clarify which formats to use.
370 USING INDESIGN Graphics Last updated 11/16/2011 Bitmap images are resolution-dependent—that is, they contain a fixed number of pixels. As a result, they can lose detail and appear jagged if they are scaled to high magnifications on-screen or if they are printed at a lower resolution than they were created for.
371 USING INDESIGN Graphics Last updated 11/16/2011 web browser. When you’re publishing online, the only times you’re likely to need resolutions above those ranges are when you want viewers to be able to zoom in for more detail in a PDF document, or when you’re producing a document for printing on demand.
372 USING INDESIGN Graphics Last updated 11/16/2011 You can transform a PDF as a single object (you can rotate or resize it, for example), but you cannot edit the paths, objects, or text within the illustration.
373 USING INDESIGN Graphics Last updated 11/16/2011 Text If you drag text from Illustrator into InDesign, it’s converted to outlines and isn’t editable with the Text tool. If you select text using the Text tool in Illustrator, and then copy it into a text frame in InDesign, the text loses its formatting but is editable.
374 USING INDESIGN Graphics Last updated 11/16/2011 Comparing screen and device resolution in placed PDF pages A placed PDF page displays at the best resolution possible for the given scale and screen resolution. When printed on a PostScript output device, a placed PDF page always prints at the resolution of the device.
375 USING INDESIGN Graphics Last updated 11/16/2011 Add pages in your document to hold the pages you want to import. After you choose File > Place and select an INDD file, you can choose Show Import Options and then choose which pages to import, which layers to make visible, and how to crop the imported pages.
376 USING INDESIGN Graphics Last updated 11/16/2011 JPEG (.jpg) files The Joint Photographic Experts Group (JPEG) format is commonly used to display photographs and other continuous-tone images in HTML files over the web and in other online media. The JPEG format supports CMYK, RGB, and grayscale color modes.
377 USING INDESIGN Graphics Last updated 11/16/2011 InDesign can rebuild a composite image from DCS 2.0 or 1.0 separations files, if the files were created in Photoshop.
378 USING INDESIGN Graphics Last updated 11/16/2011 Placing graphics Place (import) graphics The Place command is the primary method used to insert graphics into InDesign because it provides the highest level of support for resolution, file formats, multipage PDF and INDD files, and color.
379 USING INDESIGN Graphics Last updated 11/16/2011 • To import into an existing, unselected frame, click the loaded graphics icon anywhere in that frame. • To import into an existing selected frame, you don’t need to do anything if Replace Selected Item is selected.
380 USING INDESIGN Graphics Last updated 11/16/2011 Proxy Generation This creates a low-resolution bitmap representation of an image when drawing the file to the screen. The following settings control how the proxy will be generated: • Use TIFF Or PICT Preview Some EPS images contain an embedded preview.
381 USING INDESIGN Graphics Last updated 11/16/2011 Portable Network Graphics (.png) import options When you place a PNG image and select Show Import Options in the Place dialog box, you’ll see a dialog box with three sections of import settings. Two sections contain the same options available for other bitmap image formats.
382 USING INDESIGN Graphics Last updated 11/16/2011 • Art Places the PDF only in the area defined by a rectangle that the author created as a placeable artwork (for example, clip art). • Crop Places the PDF only in the area that is displayed or printed by Adobe Acrobat.
383 USING INDESIGN Graphics Last updated 11/16/2011 When you place an InDesign file and select Show Import Options in the Place dialog box, you’ll see a dialog box containing the following options: Show preview Preview a page before you place it. You can type a page number or click the arrows to preview a page in a multi-page document.
384 USING INDESIGN Graphics Last updated 11/16/2011 • To import all the loaded graphics in a grid, start dragging, and press the arrow keys to determine the number of rows and columns. Use the Up Arrow and Down Arrow keys to change the number of rows and the Left Arrow and Right Arrow keys to change the number of columns.
385 USING INDESIGN Graphics Last updated 11/16/2011 10 Set the When Updating Link option as desired: Use Photoshop’s/PDF’s Layer Visibility Matches the layer visibility settings to those of the linked file when you update the link. Keep Layer Visibility Overrides Maintains the layer visibility settings as specified in the InDesign document.
386 USING INDESIGN Graphics Last updated 11/16/2011 Copying and pasting or dragging between two InDesign documents, or within a single document, however, preserves all of the graphics attributes that were imported or applied.
387 USING INDESIGN Graphics Last updated 11/16/2011 Check your print settings If your image appears in low resolution in print, check your print settings to make sure graphics are printing properly. In the Graphics section of the Print dialog box, choose Send Data > All.
388 USING INDESIGN Graphics Last updated 11/16/2011 Use Display Performance preferences to set the default option used to open all documents, and customize the settings that define those options. Each display option has separate settings for displaying raster images, vector graphics, and transparencies.
389 USING INDESIGN Graphics Last updated 11/16/2011 You can also create a simple contact sheet in InDesign by placing multiple images in a grid. 1 Choose File > Place, select multiple images, and choose Open. If you want to include captions with your images, select Create Static Captions.
390 USING INDESIGN Graphics Last updated 11/16/2011 Links panel A. Category columns B. Show/Hide Link Information C. One or more instances modified icon D. Modified icon E. Missing-link icon F. Embedded-link icon When the same graphic appears several times in the document, the links are combined under a disclosure triangle in the Links panel.
391 USING INDESIGN Graphics Last updated 11/16/2011 Use the Links panel • To display the Links panel, choose Window > Links. Each linked file and automatically embedded file is identified by name.
392 USING INDESIGN Graphics Last updated 11/16/2011 View metadata via the Links panel If a linked or embedded file contains metadata, you can view the metadata using the Links panel. You cannot edit or replace metadata associated with a linked file. ❖ Select a file in the Links panel and choose Utilities > XMP File Info from the panel menu.
393 USING INDESIGN Graphics Last updated 11/16/2011 Choose how relinked graphics are scaled When you relink to replace one graphic with a different source file, you can keep the image dimensions of the file that’s being replaced, or you can display the incoming file in its actual dimensions.
394 USING INDESIGN Graphics Last updated 11/16/2011 Find Missing Links Before Opening Document If you turn off this option, InDesign does not attempt to resolve the missing links. You may want to turn off this option if links slow performance to a server or if unexpected linkings occur.
395 USING INDESIGN Graphics Last updated 11/16/2011 Relink files with different file extensions The Relink File Extension command lets you replace images based on file extensions. For example, if you have several JPEG images in your document, you can replace them with PSD files.
396 USING INDESIGN Graphics Last updated 11/16/2011 Edit original artwork using a different application 1 Select the image. 2 Choose Edit > Edit With, and then specify the application you want to use to open the file. If the application does not appear, choose Other, and browse to locate the application.
397 USING INDESIGN Graphics Last updated 11/16/2011 • Select one or more objects, and then drag the selection to the Mini Bridge panel. A snippet file is created. Rename the file. • Drag an item from Structure View to your desktop. Add snippets to a document 1 Choose File > Place.
398 USING INDESIGN Graphics Last updated 11/16/2011 Object library in Library panel A. Object thumbnail and name B. Library Item Information button C. Show Library Subset button D.
399 USING INDESIGN Graphics Last updated 11/16/2011 Delete a library ❖ In Explorer (Windows) or Finder (Mac OS), drag a library file to the Recycle Bin (Windows) or Trash (Mac OS).
400 USING INDESIGN Graphics Last updated 11/16/2011 Delete an object from an object library ❖ In the Object Library panel, select an object, and do one of the following: • Click the Delete Library Item button. • Drag the item to the Delete Library Item button.
401 USING INDESIGN Graphics Last updated 11/16/2011 6 To add search criteria, click More Choices up to five times; each click adds one search term. To remove search criteria, click Fewer Choices as necessary; each click removes one search term. 7 To display only those objects that match all search criteria, select Match All.
402 Last updated 11/16/2011 Chapter 13: Frames and objects Selecting objects Overview of selection methods InDesign provides the following selection methods and tools: Selection tool Allows you to select text and graphics frames, and work with an object using its bounding box.
403 USING INDESIGN Frames and objects Last updated 11/16/2011 There are two ways to select an object in InDesign: Path with bounding box selected (left), path selected (middle), and path with anchor p.
404 USING INDESIGN Frames and objects Last updated 11/16/2011 “ Select nested or overlapping objects ” on page 406 “ Ruler guides ” on page 56 “ Keys for selecting and moving objects ” on .
405 USING INDESIGN Frames and objects Last updated 11/16/2011 • To select all of a path’s points at once, click the point at the center of the object, or hold down Alt (Windows) or Option (Mac OS) and click the path. If you direct-select any part of the object, the Select All command also selects all the points.
406 USING INDESIGN Frames and objects Last updated 11/16/2011 2 Choose Edit > Select All. Note: The Select All command doesn’t select nested objects, objects that are positioned on locked or hidden layers, master page items that are not overridden on document pages, or objects on other spreads and pasteboards (except for threaded text).
407 USING INDESIGN Frames and objects Last updated 11/16/2011 • Position the pointer over the object you want to select and right-click (Windows) or Control-click (Mac OS) to display the context menu. Then choose Select and the desired selection option.
408 USING INDESIGN Frames and objects Last updated 11/16/2011 The Layers panel also helps determine the stacking order of objects. The order of each layer in the Layers panel determines whether objects in a layer appear in front of or behind objects on other layers.
409 USING INDESIGN Frames and objects Last updated 11/16/2011 Change transformation settings The Transform panel includes several options that determine how objects are transformed and how transformations are displayed in the Transform and Control panels.
410 USING INDESIGN Frames and objects Last updated 11/16/2011 Change the information displayed for nested objects The Transform panel orients an object to a spread’s pasteboard, where a horizontal line has a rotation angle of 0°.
411 USING INDESIGN Frames and objects Last updated 11/16/2011 • The position of the nested object in relation to the zero point (upper-left corner) of its container frame. Turn on Show Content Offset and select the nested object using the Direct Selection tool.
412 USING INDESIGN Frames and objects Last updated 11/16/2011 Note: This option does not change how stroke weights are affected when scaling a frame, only whether any changes affect measurements.
413 USING INDESIGN Frames and objects Last updated 11/16/2011 • When you rotate, skew, or scale a group, the settings apply to the entire group, as well as to the individual objects in the group.
414 USING INDESIGN Frames and objects Last updated 11/16/2011 • To rotate objects, position the pointer anywhere outside a bounding box handle. When the pointer changes to , drag until the selection is at the desired angle of rotation.
415 USING INDESIGN Frames and objects Last updated 11/16/2011 If Smart Guides (and Smart Dimensions) are turned on, visual clues indicate when you’re rotating an object the same degree as a nearby rotated object.
416 USING INDESIGN Frames and objects Last updated 11/16/2011 Move objects You can move objects by cutting them from one spot and pasting them into another, by entering new horizontal and vertical coordinates, or by dragging them. Dragging also allows you to move a copy of an object or to copy objects between software applications.
417 USING INDESIGN Frames and objects Last updated 11/16/2011 Move objects by a precise amount You can use the Move command to move an object by a specific amount. This command also lets you move a copy of the selected object, leaving the original in place.
418 USING INDESIGN Frames and objects Last updated 11/16/2011 Resizing a frame By default, when the frame (and not the frame contents) is selected, changing the values of the Width and Height fields changes only the frame, not its contents, regardless of which selection tool is active.
419 USING INDESIGN Frames and objects Last updated 11/16/2011 Resizing an imported graphic A. Frame selected with Selection tool B. Frame resized C. Frame and content scaled • To resize a frame, drag any handle using the Selection tool. If you hold down Ctrl (Windows) or Command (Mac OS) while dragging, the frame and the content are scaled.
420 USING INDESIGN Frames and objects Last updated 11/16/2011 More Help topics “ Scale type ” on page 258 “ Keys for transforming objects ” on page 694 “ Scaling vs.
421 USING INDESIGN Frames and objects Last updated 11/16/2011 To maintain the original proportions of the object when using the Transform panel, make sure the Constrain Proportions icon is selected. 4 Do any of the following: • To preview the effect before you apply it, select Preview.
422 USING INDESIGN Frames and objects Last updated 11/16/2011 Original object (top) reflected using Flip Horizontal (middle) and Flip Vertical (bottom) The flip/rotate indicator (P) in the middle of the Control panel appears white with a black outline if an object is flipped.
423 USING INDESIGN Frames and objects Last updated 11/16/2011 2 Do one of the following: • To shear selected objects by dragging, select the Shear tool . Then position the Shear tool away from the reference point, and drag. Shift-drag to constrain shearing to a perpendicular vertical or horizontal axis.
424 USING INDESIGN Frames and objects Last updated 11/16/2011 • To shear a copy of the object, click Copy. Repeat transformations You can repeat transformations, such as moving, scaling, rotating, resizing, reflecting, shearing, and fitting.
425 USING INDESIGN Frames and objects Last updated 11/16/2011 Align panel A. Vertical alignment buttons B. Vertical distribution buttons C. Use Spacing distribution D.
426 USING INDESIGN Frames and objects Last updated 11/16/2011 Using the Distribute Horizontal Centers option for even spacing A. Creates even spacing between the centers of each object B.
427 USING INDESIGN Frames and objects Last updated 11/16/2011 Using the Distribute Horizontal Space option and adding a value for Use Spacing A. Creates spaces of a specified value between each object B.
428 USING INDESIGN Frames and objects Last updated 11/16/2011 To view hints on using the Gap tool, select the Gap tool and open the Tool Hints panel (Window > Utilities > Tool Hints).
429 USING INDESIGN Frames and objects Last updated 11/16/2011 More Help topics “ Arrange objects in a stack ” on page 407 “ Select nested or overlapping objects ” on page 406 Lock or unlock objects You can use the Lock command to specify that you don’t want certain objects to move in your document.
430 USING INDESIGN Frames and objects Last updated 11/16/2011 Duplicate a selected object as you transform You can duplicate an object each time you change its position, orientation, or proportions.
431 USING INDESIGN Frames and objects Last updated 11/16/2011 3 In the Attributes panel, select Nonprinting. More Help topics “ Set a layer as nonprinting ” on page 83 Working with frames and obje.
432 USING INDESIGN Frames and objects Last updated 11/16/2011 • If you’re removing text characters, select them with the Type tool . 2 Do one of the following: • To permanently remove the content, press Delete or Backspace.
433 USING INDESIGN Frames and objects Last updated 11/16/2011 Using Auto Fit If you resize an image frame when Auto-Fit is not selected, the frame resizes while the image size remains the same. If you select Auto-Fit, the image resizes with the frame.
434 USING INDESIGN Frames and objects Last updated 11/16/2011 If a selection tool doesn’t work the way you expect it to, try deselecting everything first.
435 USING INDESIGN Frames and objects Last updated 11/16/2011 2 To enlarge the frame without resizing the graphic, drag any bounding box handle outward. To maintain frame proportions, hold down Shift as you drag. 3 Use the Swatches panel and the toolbox to apply a stroke and fill color.
436 USING INDESIGN Frames and objects Last updated 11/16/2011 Object export options (CS5.5) Object export options can be used to specify export parameters required when you export to different formats such as EPUB, HTML, or accessible PDFs. Object export options can be applied to both text frames and graphic frames, as well as groups.
437 USING INDESIGN Frames and objects Last updated 11/16/2011 • From Structure Use text as specified in the structure. See “ Label graphics for use with screen-reader software ” on page 522. • From XMP (Title |Description |Headline) Use data stored in common XMP fields.
438 USING INDESIGN Frames and objects Last updated 11/16/2011 Clipping paths Clipping paths Clipping paths crop part of the artwork so that only a portion of the artwork appears through the shape or shapes you create. You can create clipping paths to hide unwanted parts of an image, creating both a path for the image and a frame for the graphic.
439 USING INDESIGN Frames and objects Last updated 11/16/2011 When you place a Photoshop file, the Image Import Options dialog box lets you choose to use the default clipping path or select an alpha channel for clipping. 1 Select an imported graphic, and choose Object > Clipping Path.
440 USING INDESIGN Frames and objects Last updated 11/16/2011 Threshold levels at 25 (left) and 55 (right) Tolerance Specifies how similar a pixel’s lightness value can be to the Threshold value before the pixel is hidden by the clipping path.
441 USING INDESIGN Frames and objects Last updated 11/16/2011 Restrict to Frame Creates a clipping path that stops at the visible edge of the graphic. This can result in a simpler path when you use the graphic’s frame to crop the graphic. Use High Resolution Image Calculates transparent areas using the actual file, for maximum precision.
442 Last updated 11/16/2011 Chapter 14: Transparency effects Adding transparency effects When you create an object in Adobe InDesign, by default it appears solid; that is, it has an opacity of 100%. You can apply effects to objects using opacity and blends.
443 USING INDESIGN Transparency effects Last updated 11/16/2011 Add and edit transparency effects in the Effects panel A. Blending mode B. Levels C. FX icon D. Clear effects E. FX button Blending Mode Specifies how colors in transparent objects interact with the objects behind them.
444 USING INDESIGN Transparency effects Last updated 11/16/2011 Stroke Affects only the object’s stroke (including its gap color). Fill Affects only the object’s fill.
445 USING INDESIGN Transparency effects Last updated 11/16/2011 You can move effects from one level to another in the same object by dragging the FX icon.
446 USING INDESIGN Transparency effects Last updated 11/16/2011 Note: In addition to the descriptions covered here, see “ Common transparency settings and options ” on page 446. Common transparency settings and options Many transparency effect settings and options are the same across different effects.
447 USING INDESIGN Transparency effects Last updated 11/16/2011 Click the Drop Shadow button on the Control panel to quickly apply a drop shadow to or remove a drop shadow from an object, a stroke, a fill, or text. To select a color for a drop shadow, click the Set Shadow Color button (next to the Blending Mode menu) and choose a color.
448 USING INDESIGN Transparency effects Last updated 11/16/2011 Use Global Light Applies the global light source as specified for all transparency effects. Choosing this option overrides any Angle and Altitude settings. Highlight and Shadow Specifies the blending mode for the bevel or emboss highlight and shadow.
449 USING INDESIGN Transparency effects Last updated 11/16/2011 • To adjust the mid-point between two opacity stops, drag a diamond above the Gradient Slider. Where the diamond is located determines how abrupt or gradual the transition between stops is.
450 USING INDESIGN Transparency effects Last updated 11/16/2011 More Help topics “ Applying transparency to groups ” on page 450 Applying Opacity Effects video Setting Opacity video Applying transparency to groups Besides applying transparency effects to single objects, you can apply them to groups.
451 USING INDESIGN Transparency effects Last updated 11/16/2011 Use the View menu to quickly change transparency display between Fast Display, Typical Display, and High Quality Display.
452 USING INDESIGN Transparency effects Last updated 11/16/2011 Screen Multiplies the inverse of the blend and base colors. The resulting color is always a lighter color. Screening with black leaves the color unchanged. Screening with white produces white.
453 USING INDESIGN Transparency effects Last updated 11/16/2011 Isolate blending modes When you apply a blending mode to an object, its colors blend with all objects beneath it. If you want to limit the blending to specific objects, you can group those objects and then apply the Isolate Blending option to the group.
454 USING INDESIGN Transparency effects Last updated 11/16/2011 3 Choose Object > Group. 4 In the Effects panel, select Knockout Group. (If the option is not visible, select Show Options in the Effects panel menu.
455 USING INDESIGN Transparency effects Last updated 11/16/2011 About transparency flattener presets If you regularly print or export documents that contain transparency, you can automate the flattening process by saving flattening settings in a transparency flattener preset .
456 USING INDESIGN Transparency effects Last updated 11/16/2011 • To base a preset on a predefined preset, select one in the list and click New. • To edit an existing preset, select the preset and click Edit. Note: You can’t edit the default flattener presets.
457 USING INDESIGN Transparency effects Last updated 11/16/2011 Custom Opens the Custom Spread Flattener Settings dialog box for specifying settings. Ignore the flattener preset on an individual sprea.
458 USING INDESIGN Transparency effects Last updated 11/16/2011 Transparency Flattener Preset options Name/Preset Specifies the name of the preset. Depending on the dialog box, you can type a name in the Name text box or accept the default. You can enter the name of an existing preset to edit that preset.
459 USING INDESIGN Transparency effects Last updated 11/16/2011 transparent background). Preserve Alpha Transparency can be useful if you are exporting to SWF or SVG, since both of these formats support alpha transparency.
460 USING INDESIGN Transparency effects Last updated 11/16/2011 Best practices when creating transparency In most cases, flattening produces excellent results when you use an appropriate predefined flattener preset, or create a preset with settings appropriate for your final output.
461 USING INDESIGN Transparency effects Last updated 11/16/2011 • If you create a high-resolution print piece that you’ll also publish as a high-profile PDF document on a website, you may need to switch the blending space back and forth before final output.
462 USING INDESIGN Transparency effects Last updated 11/16/2011 • If you must use Acrobat 4.0 compatibility, your document contains spot colors, and you want to create a PDF file for on-screen viewing (such as a client review), you may want to select the Simulate Overprint option in the Output area of the Export Adobe PDF dialog box.
463 Last updated 11/16/2011 Chapter 15: Color Understanding spot and process colors About spot and process colors You can designate colors as either spot or process color types, which correspond to the two main ink types used in commercial printing.
464 USING INDESIGN Color Last updated 11/16/2011 Keep the following guidelines in mind when specifying a process color: • For best results in a high-quality printed document, specify process colors using CMYK values printed in process color reference charts, such as those available from a commercial printer.
465 USING INDESIGN Color Last updated 11/16/2011 Applying color Apply color Adobe InDesign provides a number of tools for applying color, including the Toolbox, the Swatches panel, the Color panel, the Color Picker, and the Control panel. When you apply a color, you can specify whether the color applies to the stroke or fill of an object.
466 USING INDESIGN Color Last updated 11/16/2011 Color Picker A. Original color B. New color C. Color field D. Color slider triangles E. Color spectrum 3 To define a color, do any of the following: • Click or drag inside the color field. Cross-hairs indicate the color’s position in the color field.
467 USING INDESIGN Color Last updated 11/16/2011 Applying colors by dragging and dropping An easy way to apply colors or gradients is to drag them from a color source to an object or panel. Dragging and dropping lets you apply colors or gradients to objects without first selecting the objects.
468 USING INDESIGN Color Last updated 11/16/2011 Color panel A. Fill box B. Stroke box C. Formatting Affects Container D. Formatting Affects Text 4 If you selected a text frame, select the Container box or Text box to change the color of either the fill or text within the frame.
469 USING INDESIGN Color Last updated 11/16/2011 3 Click any object that has the fill and stroke attributes you want to sample. A loaded eyedropper appears , and the selected objects are automatically updated with the fill and stroke attributes of the object you clicked.
470 USING INDESIGN Color Last updated 11/16/2011 Six CMYK-defined colors appear in the default Swatches panel: cyan, magenta, yellow, red, green, and blue. Note: When you print a book whose chapters contain conflicting swatches, you can instruct InDesign to synchronize settings with the master document.
471 USING INDESIGN Color Last updated 11/16/2011 2 To set what type of swatches display, click one of the following buttons at the bottom of the Swatches panel: • Show All Swatches displays all color, tint, and gradient swatches. • Show Color Swatches displays only process color, spot color, mixed ink color, and tint swatches.
472 USING INDESIGN Color Last updated 11/16/2011 To directly define a spot color using the New Swatch button in the Swatches panel, make sure that no swatches are selected, and then hold down Alt+Ctrl (Windows) or Option+Command (Mac OS) as you click the New Swatch button .
473 USING INDESIGN Color Last updated 11/16/2011 Edit a swatch You can change individual attributes of a swatch by using the Swatch Options dialog box. Additional options are available when editing mixed ink swatches and mixed ink groups. 1 In the Swatches panel, select a swatch, and do one of the following: • Double-click the swatch.
474 USING INDESIGN Color Last updated 11/16/2011 Delete all unused swatches 1 Choose Select All Unused in the Swatches panel menu. Only swatches that are not currently used in the active file will be selected.
475 USING INDESIGN Color Last updated 11/16/2011 More Help topics “ Kuler panel ” on page 477 Import selected swatches from a file 1 Choose New Color Swatch from the Swatches panel menu. 2 Choose Other Library from the Color Mode list, and then select the file from which you want to import swatches.
476 USING INDESIGN Color Last updated 11/16/2011 Color libraries installed with InDesign InDesign installs color libraries for the color matching systems described below. You can install additional color libraries and load swatches from them in InDesign.
477 USING INDESIGN Color Last updated 11/16/2011 Kuler panel About the Kuler panel The Kuler™ panel is your portal to groups of colors, or themes, created by an online community of designers. You can use it to browse thousands of themes on Kuler™, and then download some to edit or to include in your own projects.
478 USING INDESIGN Color Last updated 11/16/2011 You can also add a theme from the Create panel by clicking the Add Selected Theme To Swatches button. Edit a theme 1 In the Browse panel, locate a theme you want to edit and then double-click the theme in the search results.
479 USING INDESIGN Color Last updated 11/16/2011 Tints About tints A tint is a screened (lighter) version of a color. Tinting is an economical way to make additional spot color variations without having to pay for additional spot color inks.
480 USING INDESIGN Color Last updated 11/16/2011 Drag the Tint slider and then click Add To Swatches. Create an unnamed tint 1 In the Swatches panel, select the Fill box or the Stroke box. 2 Drag the Tint slider, or enter a tint value in the percentage box.
481 USING INDESIGN Color Last updated 11/16/2011 2 For Swatch Name, type a name for the gradient. 3 For Type, choose Linear or Radial. 4 Select the first color stop in the gradient.
482 USING INDESIGN Color Last updated 11/16/2011 Gradient panel A. Gradient fill B. Gradient type menu C. Reverse button D. Starting color stop E. Midpoint F. Ending color stop Note: If you select an object that currently uses a named gradient, editing the gradient by using the Gradient panel will change the color of that object only.
483 USING INDESIGN Color Last updated 11/16/2011 You can also drag a swatch from the Swatches panel onto the gradient bar in the Gradient panel to define a new color stop. Remove an intermediate color from a gradient ❖ Select the intermediate color stop, and drag it to the edge of the panel.
484 USING INDESIGN Color Last updated 11/16/2011 Applying gradients to text Within a single text frame, you can create multiple ranges of gradient text alongside default black text and color text. A gradient’s endpoints are always anchored in relation to the bounding box of the gradient’s path or text frame.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Adobe InDesign CS4 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Adobe InDesign CS4 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Adobe InDesign CS4, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Adobe InDesign CS4 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Adobe InDesign CS4, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Adobe InDesign CS4.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Adobe InDesign CS4. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Adobe InDesign CS4 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
