Manuel d'utilisation / d'entretien du produit 53-1001762-01 du fabricant Brocade Communications Systems
Aller à la page of 252
53-1 00 1 7 62-0 1 30 March 20 10 ® DRAFT: BROCADE CONFIDENTIAL Con v erged Enhanced Etherne t Command Re fe r e n c e Suppor ting F abric OS v6.4.0.
DRAFT: BROCADE CONFIDENTIAL Copyright © 2006-20 10 Brocade Communications Systems, Inc. All Rights Reserved. Brocade, the B-wing symbol, BigIr on, D CX, F abr ic OS, F astIron, IronPoint, IronShield,.
Converged Enhanced Ethernet Command Reference iii 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Contents About This Document In this chapt er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi How this document is organized .
iv Converged Enhanced Ethernet Command Reference 53-1001762-01 exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 f os . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Converged Enhanced Ethernet Command Reference v 53-1001762-01 switchpor t mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1 switchpor t trunk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vi Converged Enhanced Ethernet Command Reference 53-1001762-01 show lldp neighbors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 show lldp statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Converged Enhanced Ethernet Command Reference vii 53-1001762-01 clear spanning-tree count er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7 debug spanning-tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
viii Converged Enhanced Ethernet Command Reference 53-1001762-01 Chapter 10 Internet Group Management Protoco l Commands clear ip igmp gr oup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 65 clear ip igmp gr oups . . . .
Converged Enhanced Ethernet Command Reference ix 53-1001762-01 qos rcv-queue multicast rat e-limit . . . . . . . . . . . . . . . . . . . . . . . . . .204 qos rcv-queue multicast threshold . . . . . . . . . . . . . . . . . . . . . . . . .205 qos trust cos .
x Converged Enhanced Ethernet Command Reference 53-1001762-01.
Converged Enhanced Ethernet Command Reference xi 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL About This Document In this chapter • How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi • Suppor t ed hardware and sof tware.
xii Converged Enhanced Ethernet Command Reference 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL • Chapter 1 1, “RMON Commands” describes the Remot e Network Monitoring (RMON) commands used to monit or and coll ect long-t erm statistic s. • Chapter 12, “QoS Commands” describes the commands used to enable Quality of Service on the device.
Converged Enhanced Ethernet Command Reference xiii 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL What’s new in this document This document has been updat ed for 6.
xiv Converged Enhanced Ethernet Command Reference 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Notes, cautions, and warnings The f ollowing notices and statements are used in this manual. They are list ed below in order of increasing sev erity of potential hazar ds.
Converged Enhanced Ethernet Command Reference xv 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Additional information This section lists additional Br ocade and industry - specific docu mentation that you might find helpful. Brocade resources T o get up-to-the-minute information, go to http://m y .
xvi Converged Enhanced Ethernet Command Reference 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Getting technical help Contact your switch suppor t supplier f or hardwa re, firm ware, and sof tware support, including product repairs and part ordering. T o expedit e yo ur call, hav e the f ollowing information available: 1.
Converged Enhanced Ethernet Command Reference xvii 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Document feedback Quality is our first concern at Brocade and we ha ve made ev er y effor t t o ensure the accuracy and complet eness of this document.
xviii Converged Enhanced Ethernet Command R eference 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL.
Converged Enhanced Ethernet Command Reference 1 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 1 CLI Basics In this chapter • Accessing the Br ocade CEE Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 • CLI command modes .
2 Converged Enhanced Ethernet Command Reference 53-1001762-01 CLI command modes 1 DRAFT: BROCADE CONFIDENTIAL TA B L E 2 Accessing the CEE CLI command modes Command mode Prompt How to access the command mode Description EXEC switch > Enter the cmsh comm and at the Fabri c OS prompt after y ou hav e logged in as an ap propriate user .
Converged Enhanced Ethernet Command Reference 3 53-1001762-01 L2 ACL commands 1 DRAFT: BROCADE CONFIDENTIAL L2 ACL commands Use Lay er 2 Media Access Contr ol (MAC) list commands t o do the follo wing: • Identify traffic based on the MAC- addresses, su ch as VLAN IDs and di fferent encapsulations.
4 Converged Enhanced Ethernet Command Reference 53-1001762-01 L2 ACL comman ds 1 DRAFT: BROCADE CONFIDENTIAL.
Converged Enhanced Ethernet Command Reference 5 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 2 Configuration Management Commands copy Copies one file to another location.
6 Converged Enhanced Ethernet Command Reference 53-1001762-01 copy startup-config 2 DRAFT: BROCADE CONFIDENTIAL copy startup-config Copies the star tup configuration file to a netw ork ser v er or a file URL.
Converged Enhanced Ethernet Command Reference 7 53-1001762-01 delete 2 DRAFT: BROCADE CONFIDENTIAL delete Delet es a specified file from the Flash. Synopsis delet e filename Operands filename Sp ecif ies t he n ame o f the file to be del eted fr om the Flash of the local switch using the following f ormat: [fl ash://]filename.
8 Converged Enhanced Ethernet Command Reference 53-1001762-01 dir 2 DRAFT: BROCADE CONFIDENTIAL dir Lists the contents of the current directory . Synopsis dir Operands none Defaults The default is the current director y . Command Modes Privileged EXEC mode Description Use this command t o list the co ntents of th e current director y .
Converged Enhanced Ethernet Command Reference 9 53-1001762-01 disable 2 DRAFT: BROCADE CONFIDENTIAL disable Exits the Privileged EXEC mode and returns to the EXEC mode. Synopsis disable Operands none Defaults There are no def ault configurations for this command.
10 Converged Enhanced Ethernet Command Reference 53-1001762-01 do 2 DRAFT: BROCADE CONFIDENTIAL do Allows y ou to run commands in EXEC mode from the configuration mode. Synopsis do command Operands command Specifies the command you want to run. Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 11 53-1001762-01 enable 2 DRAFT: BROCADE CONFIDENTIAL enable Enables the Privilege EXEC mode. Synopsis enable Operands none Defaults There are no def ault configurations for this command. Command Modes EXEC mode Description Use this command t o enable the Privileged EXEC command mode.
12 Converged Enhanced Ethernet Command Reference 53-1001762-01 end 2 DRAFT: BROCADE CONFIDENTIAL end Returns t o the Privileged EXEC comman d mode fr om all configuration modes. Synopsis end Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 13 53-1001762-01 erase flash 2 DRAFT: BROCADE CONFIDENTIAL erase flash Erases all the files from the Flash. Synopsis erase flash Operands none Defaults There are no def ault configurations for this command.
14 Converged Enhanced Ethernet Command Reference 53-1001762-01 exec-timeout 2 DRAFT: BROCADE CONFIDENTIAL exec-timeout Sets the interval that the EXEC command interpreter wait f or user input. Synopsis exec-timeout minut es seconds no ex ec-timeout Operands minut es Specif ies the time int er val in minutes.
Converged Enhanced Ethernet Command Reference 15 53-1001762-01 exit 2 DRAFT: BROCADE CONFIDENTIAL exit Exits the current mode and returns t o the previous mo de. Synopsis exit Operands none Defaults There are no def ault configurations for this command.
16 Converged Enhanced Ethernet Command Reference 53-1001762-01 fos 2 DRAFT: BROCADE CONFIDENTIAL fos Execut es Fabric OS c ommands from the from the cmsh shell. Synopsis fos command Operands command Specifies the Fabric OS command . Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 17 53-1001762-01 fos 2 DRAFT: BROCADE CONFIDENTIAL suppor tsa ve switchshow zoneshow Usage Guidelines The Fabric OS syntax applie s t o the listed commands. The fcoelogincfg , fcoelogingr oup , and fcoelogincfg commands are not suppor t ed from cmsh shell.
18 Converged Enhanced Ethernet Command Reference 53-1001762-01 line co nsole 2 DRAFT: BROCADE CONFIDENTIAL line console Configures the Line configuration mode. Synopsis l ine console 0 Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 19 53-1001762-01 line vty 2 DRAFT: BROCADE CONFIDENTIAL line vty Configures the vir tual terminal line setting t o allo w you to set the wait time inter v al f or the T elnet session to time out. Synopsis line vty first number last number Operands first number Specifies the first line number .
20 Converged Enhanced Ethernet Command Reference 53-1001762-01 pwd 2 DRAFT: BROCADE CONFIDENTIAL pwd Print Working Directory ( pwd ); displa ys the contents of the current w orking director y . Synopsis pwd Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 21 53-1001762-01 rename 2 DRAFT: BROCADE CONFIDENTIAL rename Renames a file in the Flash. Synopsis rename sourcefile renamedfile Operands sourcefile Specifies the file name to change. renamedfile Specifies the new name of the file.
22 Converged Enhanced Ethernet Command Reference 53-1001762-01 show calendar 2 DRAFT: BROCADE CONFIDENTIAL show calendar View the current date and time based on the switch har dware clock. Synopsis s how calendar Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 23 53-1001762-01 show clock 2 DRAFT: BROCADE CONFIDENTIAL show clock Displays the time and dat e from the syst em clock. Synopsis show clock Operands none Defaults There are no def ault configurations for this command.
24 Converged Enhanced Ethernet Command Reference 53-1001762-01 show environment 2 DRAFT: BROCADE CONFIDENTIAL show environment Displays f an, temperature, red undant power syst em (RPS) availability , and power inf ormation for the switch. Synopsis show en vironment Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 25 53-1001762-01 show file 2 DRAFT: BROCADE CONFIDENTIAL show file Displays the cont ents of a te xt file in the local Flash. Synopsis show file file _name Operands file_name Specifies the file whose contents are to be display ed.
26 Converged Enhanced Ethernet Command Reference 53-1001762-01 show line 2 DRAFT: BROCADE CONFIDENTIAL show line Displays line paramet ers. Synopsis show l ine [ first line number | last line number ] Operands first line nu mber Specifies the first line number .
Converged Enhanced Ethernet Command Reference 27 53-1001762-01 show logging 2 DRAFT: BROCADE CONFIDENTIAL show logging Displays the int ernal syslog buf fer of the switch. Synopsis show lo gging Operands none Defaults There are no def ault configurations for this command.
28 Converged Enhanced Ethernet Command Reference 53-1001762-01 show media 2 DRAFT: BROCADE CONFIDENTIAL show media Displays the SFP inf ormation for all the inter f aces present on a switch. Synopsis show media Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 29 53-1001762-01 show media interface 2 DRAFT: BROCADE CONFIDENTIAL show media interface Displays the SFP inf ormation for a specific interface. Synopsis show media inter f ace Operands tengigabitethernet Specifies a valid 10 Gbps Ethernet inter face.
30 Converged Enhanced Ethernet Command Reference 53-1001762-01 show media linecard 2 DRAFT: BROCADE CONFIDENTIAL show media linecard Displays the SFP inf ormation for all the interfaces of a specific line card. Synopsis show media linecar d nu mber Operands number Linecard numb er .
Converged Enhanced Ethernet Command Reference 31 53-1001762-01 show processes cpu 2 DRAFT: BROCADE CONFIDENTIAL show processes cpu Displays inf ormation about t h e active processe s in the switch and their corr esponding CPU utilization statistics.
32 Converged Enhanced Ethernet Command Reference 53-1001762-01 show processes memory 2 DRAFT: BROCADE CONFIDENTIAL show processes memory Displays the memory usage information ba sed on pr ocesses runn ing in the syst em. Synopsis show pr ocesses memor y summar y Operands summar y Shows a summary of memor y usage b y all processes.
Converged Enhanced Ethernet Command Reference 33 53-1001762-01 show running-config 2 DRAFT: BROCADE CONFIDENTIAL show running-config Displays the cont ents of the conf iguratio n file currently running on the system.
34 Converged Enhanced Ethernet Command Reference 53-1001762-01 show startup-config 2 DRAFT: BROCADE CONFIDENTIAL show startup-config Displays the cont ent of the star tup configuration f ile. Synopsis show star tup-config Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 35 53-1001762-01 show system 2 DRAFT: BROCADE CONFIDENTIAL show system Displays syst em information. Synopsis show system Operands none Defaults There are no def ault configurations for this command.
36 Converged Enhanced Ethernet Command Reference 53-1001762-01 show tech-support 2 DRAFT: BROCADE CONFIDENTIAL show tech-support Displays output f or troubleshooting. Synopsis show tech-suppor t Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 37 53-1001762-01 show users 2 DRAFT: BROCADE CONFIDENTIAL show users Displays inf ormation on all user s currently logged int o the switch. Synopsis show users Operands none Defaults There are no def ault configurations for this command.
38 Converged Enhanced Ethernet Command Reference 53-1001762-01 show version 2 DRAFT: BROCADE CONFIDENTIAL show version Displays v ersion information f or the hardware and software. Synopsis show version Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 39 53-1001762-01 terminal length 2 DRAFT: BROCADE CONFIDENTIAL terminal length Sets the number of lines t o display on a sc reen. Synopsis te rminal length number Operands number Specifies the number of lines t o display on a screen.
40 Converged Enhanced Ethernet Command Reference 53-1001762-01 terminal monitor 2 DRAFT: BROCADE CONFIDENTIAL terminal monitor Displays the RASlog and debug outputs on a terminal. Synopsis t erminal monitor ter mi na l n o m oni tor Operands none Defaults Th e term inal mon itor o pti on is dis able d.
Converged Enhanced Ethernet Command Reference 41 53-1001762-01 write erase 2 DRAFT: BROCADE CONFIDENTIAL write erase Remo ves the star tup configuration from the switch. Synopsis write erase Operands none Defaults There are no def ault configurations for this command.
42 Converged Enhanced Ethernet Command Reference 53-1001762-01 write memory 2 DRAFT: BROCADE CONFIDENTIAL write memory Copies the current running configuration to the star tup configuration file. Synopsis write memor y Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 43 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 3 VLAN Commands fcf forward Enables Fibre Channel over Et hernet (FCoE) on a VLAN int er face. Synopsis fcf forward no fcf forward Operands none Defaults FCF f or war ding is disabled.
44 Converged Enhanced Ethernet Command Reference 53-1001762-01 interface vlan 3 DRAFT: BROCADE CONFIDENTIAL interface vlan Configures a VLAN inter face. Synopsis inter f a ce vlan vlan_id no interface vlan vlan_id Operands vlan_id Specifies the VLAN int er face t o configure.
Converged Enhanced Ethernet Command Reference 45 53-1001762-01 show interface 3 DRAFT: BROCADE CONFIDENTIAL show interface Displays the configuration and status of an int er face. Synopsis show interface [ tengigabitethernet slot/por t | por t-channel number | switchpor t ] Operands tengigabitethernet Specifies a valid 10 Gbps Ethernet inter face.
46 Converged Enhanced Ethernet Command Reference 53-1001762-01 show vlan 3 DRAFT: BROCADE CONFIDENTIAL show vlan Displays inf ormation about a specif ic VLA N int er face. Synopsis show vlan { vlan_id | brief | classifier | fcoe } Operands vlan_id Specifies the VLAN int er face to display .
Converged Enhanced Ethernet Command Reference 47 53-1001762-01 show vlan classifier 3 DRAFT: BROCADE CONFIDENTIAL show vlan classifier Displays inf ormation about a specif ic V LAN classifier group.
48 Converged Enhanced Ethernet Command Reference 53-1001762-01 switchport 3 DRAFT: BROCADE CONFIDENTIAL switchport Puts the int er face to Layer 2 mo de and sets the swit ching charact eristics of the Layer 2 int er face to the defaults.
Converged Enhanced Ethernet Command Reference 49 53-1001762-01 switchport access 3 DRAFT: BROCADE CONFIDENTIAL switchport access Sets the Lay er 2 inter f ace as access. Synopsis switchpor t access vlan vlan_id no switchpor t access vlan Operands vlan vlan _id Sets th e por t VLAN (PVID) to the specified vlan_id .
50 Converged Enhanced Ethernet Command Reference 53-1001762-01 switchport converged 3 DRAFT: BROCADE CONFIDENTIAL switchport converged Adds or remo ves native and tagged VLANs on a La yer 2 interface.
Converged Enhanced Ethernet Command Reference 51 53-1001762-01 switchport mode 3 DRAFT: BROCADE CONFIDENTIAL switchport mode Sets the mode of the La yer 2 inter f ace. Synopsis switchpor t mode { access | trunk | converged } Operands access Sets the Lay er 2 inter f ace as access.
52 Converged Enhanced Ethernet Command Reference 53-1001762-01 switchport trunk 3 DRAFT: BROCADE CONFIDENTIAL switchport trunk Adds or remo ves tagged VLANs on a La yer 2 int er face.
Converged Enhanced Ethernet Command Reference 53 53-1001762-01 vlan classifier activate group 3 DRAFT: BROCADE CONFIDENTIAL vlan classifier activate group Activat es a VLAN classifier group.
54 Converged Enhanced Ethernet Command Reference 53-1001762-01 vlan classifier group 3 DRAFT: BROCADE CONFIDENTIAL vlan classifier group Adds and delet es rules to a VLAN classifier group.
Converged Enhanced Ethernet Command Reference 55 53-1001762-01 vlan classifier rule 3 DRAFT: BROCADE CONFIDENTIAL vlan classifier rule Creates a VLAN classifier rule.
56 Converged Enhanced Ethernet Command Reference 53-1001762-01 vlan classifier rule 3 DRAFT: BROCADE CONFIDENTIAL.
Converged Enhanced Ethernet Command Reference 57 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 4 Interface Commands clear counters Clears s tatistics on all inter faces on the switch.
58 Converged Enhanced Ethernet Command Reference 53-1001762-01 clear counters 4 DRAFT: BROCADE CONFIDENTIAL See Also show inter faces.
Converged Enhanced Ethernet Command Reference 59 53-1001762-01 description 4 DRAFT: BROCADE CONFIDENTIAL description Specifies a string that contains the description of the in t er face. Synopsis description li ne no description Operands line Specifies characters describing the interface.
60 Converged Enhanced Ethernet Command Reference 53-1001762-01 interface 4 DRAFT: BROCADE CONFIDENTIAL interface Enters the int er face configuratio n mode to configure an interface.
Converged Enhanced Ethernet Command Reference 61 53-1001762-01 mtu 4 DRAFT: BROCADE CONFIDENTIAL mtu Specifies the MTU on the interface. Synopsis mtu size Operands size Specifies the size of the maximum transmission unit (MTU) of an int er face. The allow ed MTU size is 1522-9208 b ytes.
62 Converged Enhanced Ethernet Command Reference 53-1001762-01 show interface 4 DRAFT: BROCADE CONFIDENTIAL show interface Synopsis show interface [ por t-channel number | tengigab itethernet slot/port | switchport ] Operands por t-channel number S pecifies to display the por t-channel number .
Converged Enhanced Ethernet Command Reference 63 53-1001762-01 show interface 4 DRAFT: BROCADE CONFIDENTIAL Time since last interface status change: 00:02:17 T o display La yer 2 information f or all .
64 Converged Enhanced Ethernet Command Reference 53-1001762-01 show ip interface 4 DRAFT: BROCADE CONFIDENTIAL show ip interface Displays the IP inter fac e status and configurat ion of all inter faces or a specified inter face.
Converged Enhanced Ethernet Command Reference 65 53-1001762-01 show ip interface 4 DRAFT: BROCADE CONFIDENTIAL TenGigabitEthernet 0/13 unassigned up up TenGigabitEthernet 0/14 unassigned up down TenGi.
66 Converged Enhanced Ethernet Command Reference 53-1001762-01 shutdown 4 DRAFT: BROCADE CONFIDENTIAL shutdown Disables the select ed inter f ace. Synopsis shutdown no shutdown Operands none Defaults The interface is disabled. Command Modes Interface configuration mode Description Use this command t o disable an inter f ace.
Converged Enhanced Ethernet Command Reference 67 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 5 Link Layer Discovery Protocol Commands advertise dcbx-fcoe-app-tlv Advertises application T ype, Le.
68 Converged Enhanced Ethernet Command Reference 53-1001762-01 advertise dcbx-fcoe-logical-lin k-tlv 5 DRAFT: BROCADE CONFIDENTIAL advertise dcbx-fcoe-logical-link-tlv Advertises to an y attached device th e FCo E status of the logical link.
Converged Enhanced Ethernet Command Reference 69 53-1001762-01 advertise dcbx-tlv 5 DRAFT: BROCADE CONFIDENTIAL advertise dcbx-tlv Advertises to an y attached device mandat or y Data Center Bridging eXchange prot ocol (DCBX) T ype, Length, V alues (TL Vs).
70 Converged Enhanced Ethernet Command Reference 53-1001762-01 advertise dot1-tlv 5 DRAFT: BROCADE CONFIDENTIAL advertise dot1-tlv Adv er tises to an y attached device I EEE 802.1 orga nizationally specific T ype, Length, V alue (TL V). Synopsis adver tise dot1-tlv no advertis e do t1-tlv Operands none Defaults Adv er tise is disabled.
Converged Enhanced Ethernet Command Reference 71 53-1001762-01 advertise dot3-tlv 5 DRAFT: BROCADE CONFIDENTIAL advertise dot3-tlv Advertises to an y attached device IEEE 802. 3 organizationally specific T ype, Length, Value ( TL V). Synopsis adver tise dot3-tlv no advertis e do t3-tlv Operands none Defaults Adv er tise is disabled.
72 Converged Enhanced Ethernet Command Reference 53-1001762-01 advertise optional-tlv 5 DRAFT: BROCADE CONFIDENTIAL advertise optional-tlv Adv er tises the optional T ype, Length, and Value (TL V)s.
Converged Enhanced Ethernet Command Reference 73 53-1001762-01 clear lldp neighbors 5 DRAFT: BROCADE CONFIDENTIAL clear lldp neighbors Clears t he Link Lay er Disco ver y Prot oc ol (LLDP) ne ighbor information on all or specified inter f aces.
74 Converged Enhanced Ethernet Command Reference 53-1001762-01 clear lldp statistics 5 DRAFT: BROCADE CONFIDENTIAL clear lldp statistics Clears LLDP statistics for all inte rfaces or a specified inter f ace.
Converged Enhanced Ethernet Command Reference 75 53-1001762-01 debug lldp packet 5 DRAFT: BROCADE CONFIDENTIAL debug lldp packet Enables debugging for Link Laye r Discov er y Prot oc ol (LLDP).
76 Converged Enhanced Ethernet Command Reference 53-1001762-01 description 5 DRAFT: BROCADE CONFIDENTIAL description Specifies a string that contains the description of the LLDP . Synopsis description li ne no description Operands line Characte rs describin g the LLDP pro tocol.
Converged Enhanced Ethernet Command Reference 77 53-1001762-01 hello 5 DRAFT: BROCADE CONFIDENTIAL hello Sets the Hello transmit interval. Synopsis hello seconds no hello Operands seconds Sets the Hello transmit int er val. The ra nge of valid values is 4-180 seconds.
78 Converged Enhanced Ethernet Command Reference 53-1001762-01 lldp dcbx-version 5 DRAFT: BROCADE CONFIDENTIAL lldp dcbx-version Specifies which version of the Data Center Bridging Exchange (DCBX) protocol t o use.
Converged Enhanced Ethernet Command Reference 79 53-1001762-01 lldp disable 5 DRAFT: BROCADE CONFIDENTIAL lldp disable Disables LLDP on the inte r face. Synopsis lldp disable no lldp disable Operands none Defaults By default, LLDP is enabled at both the global and interface levels.
80 Converged Enhanced Ethernet Command Reference 53-1001762-01 lldp fcoe-priority-bits 5 DRAFT: BROCADE CONFIDENTIAL lldp fcoe-priority-bits Sets the priorities on which FCoE traffic will be allowed. Synopsis lldp fcoe-priority-bits value no lldp fcoe-priority-bits Operands val ue Specifies the bitmap value.
Converged Enhanced Ethernet Command Reference 81 53-1001762-01 lldp profile 5 DRAFT: BROCADE CONFIDENTIAL lldp profile Applies a Link Layer Di scovery Prot ocol (LLDP) pr ofile on an int er face. Synopsis lldp profile name no lldp profile Operands name Specifies the profile name.
82 Converged Enhanced Ethernet Command Reference 53-1001762-01 mode 5 DRAFT: BROCADE CONFIDENTIAL mode Sets the LLDP mode on the switch. Synopsis mode tx | rx no mode Operands tx Specifies to enable only the transmit mode. rx Specifies to enable o nly the receive mode.
Converged Enhanced Ethernet Command Reference 83 53-1001762-01 multiplier 5 DRAFT: BROCADE CONFIDENTIAL multiplier Sets the number of consecutiv e misses of hello messages bef ore LLDP declares the neighbor as dead. Synopsis multiplier value no multiplier Operands val ue Specifies a multiplier value t o use.
84 Converged Enhanced Ethernet Command Reference 53-1001762-01 profile 5 DRAFT: BROCADE CONFIDENTIAL profile Creates an LLD P profile. Synopsis profile name no profile name Operands name Assigns a name to th e profile. The vali d value is a maximum of 32 characters.
Converged Enhanced Ethernet Command Reference 85 53-1001762-01 protocol lldp 5 DRAFT: BROCADE CONFIDENTIAL protocol lldp Enters the Link La yer Discov er y Pro tocol (LLDP) configuration mode. Synopsis protocol lldp no prot oc ol lldp Operands none Defaults The LLDP and DCBX pr otocols are enabled.
86 Converged Enhanced Ethernet Command Reference 53-1001762-01 show debug lldp 5 DRAFT: BROCADE CONFIDENTIAL show debug lldp Displays the LLDP debugging status on the switch. Synopsis show debug lldp Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 87 53-1001762-01 show lldp interface 5 DRAFT: BROCADE CONFIDENTIAL show lldp interface Displays the LLDP status on the specified inter f ace. Synopsis show lldp interface [ tengigabitethernet slot/por t ] Operands tengigabit ethernet Specifies a valid 1 0 Gb ps Ethernet int er face.
88 Converged Enhanced Ethernet Command Reference 53-1001762-01 show lldp neighbors 5 DRAFT: BROCADE CONFIDENTIAL show lldp neighbors Displays LLDP inf ormation for all neighb oring de vices on the specified interface.
Converged Enhanced Ethernet Command Reference 89 53-1001762-01 show lldp neighbors 5 DRAFT: BROCADE CONFIDENTIAL Link Aggregation Status: Disabled Port Vlan Id: 1 Port & Protocol Vlan Flag: Supported Not enabled Port & Protocol Vlan Id: 0 Link Aggregation Port Id: 0 Max Frame Size: 2500 Management Address: 10.
90 Converged Enhanced Ethernet Command Reference 53-1001762-01 show lldp statistics 5 DRAFT: BROCADE CONFIDENTIAL show lldp statistics Displays the LLDP statistics o n all inter f aces or a specified interface.
Converged Enhanced Ethernet Command Reference 91 53-1001762-01 system-description LINE 5 DRAFT: BROCADE CONFIDENTIAL system-description LINE Sets the global syst em descr iption specific t o LLDP . Synopsis system-description line no system-description Operands line Specifies a description f or the LLDP system.
92 Converged Enhanced Ethernet Command Reference 53-1001762-01 system-name 5 DRAFT: BROCADE CONFIDENTIAL system-name Sets the global syst em name specific to LLDP . Synopsis system-name name Operands name Specifies a system name for the LLDP . The valid value s is a maximum of32 charact ers.
Converged Enhanced Ethernet Command Reference 93 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 6 Link Aggregation Control Protocol Commands channel-group Enables Li nk A ggreg ation on an int er face.
94 Converged Enhanced Ethernet Command Reference 53-1001762-01 channel-group 6 DRAFT: BROCADE CONFIDENTIAL switch(conf-if)# channel-group 4 mode active See Also inter f ace por t-channel.
Converged Enhanced Ethernet Command Reference 95 53-1001762-01 clear lacp 6 DRAFT: BROCADE CONFIDENTIAL clear lacp Clears the L ink Aggregation Group Control Prot ocol (LACP) counters on a specific po rt-chann el. Synopsis clear lacp number counters Operands number Specifies the por t channel-gr oup number .
96 Converged Enhanced Ethernet Command Reference 53-1001762-01 clear lacp coun ters 6 DRAFT: BROCADE CONFIDENTIAL clear lacp counters Clears the L ink Aggregation Group Control Prot ocol (LACP) counters on all por t-channels. Synopsis clear lacp counters Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 97 53-1001762-01 debug lacp 6 DRAFT: BROCADE CONFIDENTIAL debug lacp Enables debugging for the Link Aggr egation Control Pro tocol (LACP).
98 Converged Enhanced Ethernet Command Reference 53-1001762-01 debug lacp 6 DRAFT: BROCADE CONFIDENTIAL Examples T o enable debugging of LACP PDUs for transm itted and received packe ts on all inter f.
Converged Enhanced Ethernet Command Reference 99 53-1001762-01 lacp system-priority 6 DRAFT: BROCADE CONFIDENTIAL lacp system - priority Sets the Link Aggregation Contr ol Prot ocol (LA CP) system priority . Synopsis lacp syst em-priority value no lacp syst em-priority Operands val ue Specifies the value of the LA CP system priority .
100 Converged Enhanced Ethernet Command Reference 53-1001762-01 lacp timeou t 6 DRAFT: BROCADE CONFIDENTIAL lacp timeout Sets the timeout value used by LA CP to exchange pack ets on an interface.
Converged Enhanced Ethernet Command Reference 101 53-1001762-01 show lacp counter 6 DRAFT: BROCADE CONFIDENTIAL show lacp counter Displays the Li nk A ggregatio n Control Pr otocol (LA C P) counters on all por t-channels or a specified interface. Synopsis show lacp count er number Operands number Specifies the por t-channel number t o di splay .
102 Converged Enhanced Ethernet Command Reference 53-1001762-01 show lacp-sys-id 6 DRAFT: BROCADE CONFIDENTIAL show lacp-sys-id Displays the Li nk A ggregatio n Control Pr otocol (LA CP) system ID an d priority information. Synopsis show lacp sys-id Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 103 53-1001762-01 show port-channel 6 DRAFT: BROCADE CONFIDENTIAL show port-channel Displays the Link Aggregation Gr oup (LAG) inf ormation for a por t-channel.
104 Converged Enhanced Ethernet Command Reference 53-1001762-01 show port-channel 6 DRAFT: BROCADE CONFIDENTIAL.
Converged Enhanced Ethernet Command Reference 105 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 7 Layer 2 System Commands mac-address-table Use this command t o set the aging time or t o add static addresses t o the MAC address table.
106 Converged Enhanced Ethernet Command Reference 53-1001762-01 mac-address-table 7 DRAFT: BROCADE CONFIDENTIAL T o set the aging time t o 10 minut es: switch(config)# mac-address-table aging-time 600.
Converged Enhanced Ethernet Command Reference 107 53-1001762-01 show mac-address-table 7 DRAFT: BROCADE CONFIDENTIAL show mac-address-table Displays a specific MAC address table static and dynamic entr y or the MA C address table static and dynamic entries f or a specific interface or VLAN.
108 Converged Enhanced Ethernet Command Reference 53-1001762-01 show mac-address-table 7 DRAFT: BROCADE CONFIDENTIAL VlanId Mac-address Type State Ports 100 0011.
Converged Enhanced Ethernet Command Reference 109 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 8 Layer 2 ACL commands clear counters access-list mac Clears all the Media Acce ss C o nt rol (M AC) ACL co un te rs for al l i nt er f ac es wh ic h h ave ACL ap pl ie d on them or for a specific int er face.
110 Converged Enhanced Ethernet Command Reference 53-1001762-01 deny (extended ACLs) 8 DRAFT: BROCADE CONFIDENTIAL deny (extended ACLs) Configures a MAC address rule t o drop traffic ba sed on the source and destination MA C addresses.
Converged Enhanced Ethernet Command Reference 111 53-1001762-01 deny (extended ACLs) 8 DRAFT: BROCADE CONFIDENTIAL switch(conf-macl-ext)# no deny 0022.
112 Converged Enhanced Ethernet Command Reference 53-1001762-01 deny (standard ACLs) 8 DRAFT: BROCADE CONFIDENTIAL deny (standard ACLs) Configures a MA C address rule to drop traffic based on the sour ce MAC address.
Converged Enhanced Ethernet Command Reference 113 53-1001762-01 mac access -list extended 8 DRAFT: BROCADE CONFIDENTIAL mac access-list extended Creates and assigns a name to the extended MA C access list. Synopsis mac access-list extended name no mac access-list ext ended name Operands name Assigns a name to th e MAC e xtended access list.
114 Converged Enhanced Ethernet Command Reference 53-1001762-01 mac access-l ist standard 8 DRAFT: BROCADE CONFIDENTIAL mac access-list standard Creates and assigns a name to t he standar d MAC access list. Synopsis mac access-list standard name no mac access-list standard name Operands name Assigns a name to th e MAC standar d access list.
Converged Enhanced Ethernet Command Reference 115 53-1001762-01 mac access-gro up 8 DRAFT: BROCADE CONFIDENTIAL mac access-group Applies rules specified in a MA C ACL to tr af fi c e nte rin g a n in ter fac e. Synopsis mac access-group name in no mac access-group name Operands name Specifies the name of the standard or ext ended MAC access list.
116 Converged Enhanced Ethernet Command Reference 53-1001762-01 permit (extended ACLs) 8 DRAFT: BROCADE CONFIDENTIAL permit (extended ACLs) Configures a MA C address rule to permit traf fic based on the source and destination MA C addresses.
Converged Enhanced Ethernet Command Reference 117 53-1001762-01 permit (extended ACLs) 8 DRAFT: BROCADE CONFIDENTIAL T o delete a filt er rule in a MAC e xtended A CL: switch(conf-macl-ext)# no permit 0022.
118 Converged Enhanced Ethernet Command Reference 53-1001762-01 permit (standard ACLs) 8 DRAFT: BROCADE CONFIDENTIAL permit (standard ACLs) Configures a MA C address rule to permit traffic based on the source MAC address.
Converged Enhanced Ethernet Command Reference 119 53-1001762-01 resequence access-list mac 8 DRAFT: BROCADE CONFIDENTIAL resequence access-list mac Specifies the renumbering of the rules in a MAC A CL. Synopsis resequence access-list mac { name | seq_num | increment } Operands name Specifies the name of a standard or an ext ended MAC A CL.
120 Converged Enhanced Ethernet Command Reference 53-1001762-01 seq (extended MAC ACLs) 8 DRAFT: BROCADE CONFIDENTIAL seq (extended MAC ACLs) Inser ts a rule anywhere in the MA C A CL.
Converged Enhanced Ethernet Command Reference 121 53-1001762-01 seq (extended MAC ACLs) 8 DRAFT: BROCADE CONFIDENTIAL Example T o cre at e a rule i n a MA C extended ACL t o perm it or dr op IPv4 traffic fr om the sour ce M A C addres s 0022.3333.4444 to the destinatio n MAC ad dress 0022.
122 Converged Enhanced Ethernet Command Reference 53-1001762-01 seq (standard MAC ACLs) 8 DRAFT: BROCADE CONFIDENTIAL seq (standard MAC ACLs) Inser ts a rule anywhere in the MA C A CL. Synopsis seq va lue { deny | permit } { any | host MAC _A CL | MA C_ACL } [ count ] no seq valu e Operands val ue Specifies the seq uence number for the rule.
Converged Enhanced Ethernet Command Reference 123 53-1001762-01 show mac access-gro up 8 DRAFT: BROCADE CONFIDENTIAL show mac access-group Displays the current MAC A CL mapping to int er faces.
124 Converged Enhanced Ethernet Command Reference 53-1001762-01 show statistics access-list mac 8 DRAFT: BROCADE CONFIDENTIAL show statistics access-list mac Shows activ e ACL rules in the switch and if the rules hav e counters enabled.
Converged Enhanced Ethernet Command Reference 125 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 9 Spanning Tree Protocol Commands bridge-priority Specifies the priority of the bridge. Synopsis bridge-priorit y priority no bridge-priority Operands priority Specifies the bridge priority .
126 Converged Enhanced Ethernet Command Reference 53-1001762-01 cisco-interoperability 9 DRAFT: BROCADE CONFIDENTIAL cisco-intero perability Configures the switch to int eroperat e with some legacy Cisco switches.
Converged Enhanced Ethernet Command Reference 127 53-1001762-01 clear spanning-tree counter 9 DRAFT: BROCADE CONFIDENTIAL clear spanning-tree counter Clears all spanning-tree counters on the int er face.
128 Converged Enhanced Ethernet Command Reference 53-1001762-01 debug spanning-tree 9 DRAFT: BROCADE CONFIDENTIAL debug spanning-tree Enables debugging for the Spanning T ree Prot ocol.
Converged Enhanced Ethernet Command Reference 129 53-1001762-01 error-disable-timeout enable 9 DRAFT: BROCADE CONFIDENTIAL error-disable-timeout enable Enables the timer to bring the inter f ace out of the error -disabled state. Synopsis error-disable-timeout enable Operands none Defaults There are no def ault configurations for this command.
130 Converged Enhanced Ethernet Command Reference 53-1001762-01 error-disable-timeout interval 9 DRAFT: BROCADE CONFIDENTIAL error-disable-timeout interval Synopsis error-disable-timeout int er val seconds Operands seconds Specifies the range of time in seconds fo r the int er face to time out.
Converged Enhanced Ethernet Command Reference 131 53-1001762-01 forward-delay 9 DRAFT: BROCADE CONFIDENTIAL forward-delay Specifies the time an int er face spends in each of the list ening and learning states.
132 Converged Enhanced Ethernet Command Reference 53-1001762-01 hello-time 9 DRAFT: BROCADE CONFIDENTIAL hello-time Sets the interval between the hello Bridge Prot ocol Data Units (BPDUs) sent on an interface.
Converged Enhanced Ethernet Command Reference 133 53-1001762-01 instance 9 DRAFT: BROCADE CONFIDENTIAL instance Maps a VLAN to a Multiple Spanni ng T ree Pr otocol (M STP) instance. Synopsis instance instance_id [ vlan vlan_id | priority priority_id ] no instance Operands instance_id Specifies the MS TP instance.
134 Converged Enhanced Ethernet Command Reference 53-1001762-01 max-age 9 DRAFT: BROCADE CONFIDENTIAL max-age Sets the interval time in seconds between messa ges that the spanning tree receiv es from the interface. Synopsis max-age seconds no max-age Operands seconds Configures the Spanning tree Prot ocol inter f ace maximum-age.
Converged Enhanced Ethernet Command Reference 135 53-1001762-01 max-hops 9 DRAFT: BROCADE CONFIDENTIAL max-hops Configures the maximum number of hops f or a Br idge Prot ocol Data Unit (BPDU) in an MS TP region. Synopsis max-hops hop _count no max-hops Operands hop_count Specifies t he maximum number of hops for which the BPDU will be valid.
136 Converged Enhanced Ethernet Command Reference 53-1001762-01 port-channel path-cost 9 DRAFT: BROCADE CONFIDENTIAL port-channel path-cost Sets the path-cost behavior .
Converged Enhanced Ethernet Command Reference 137 53-1001762-01 protocol sp anning-tree 9 DRAFT: BROCADE CONFIDENTIAL protocol spanning-tree Synopsis prot ocol spanning-tree [ mstp | rs tp | stp ] no prot oco l spanning-tree Operands mstp Specifies the Multiple Spanning T ree Protocol (MS TP).
138 Converged Enhanced Ethernet Command Reference 53-1001762-01 region 9 DRAFT: BROCADE CONFIDENTIAL region Specifies the Multiple Spanning T ree Protocol (MS TP) region. Synopsis region region-name no region Operands region-name Assigns a name to an MSTP region.
Converged Enhanced Ethernet Command Reference 139 53-1001762-01 revision 9 DRAFT: BROCADE CONFIDENTIAL revision Assigns a version number to the Multiple Sp anning T ree Pro tocol (MSTP) configuration. Synopsis revision numbe r no revision Operands number Specifies the revision or version numb er of the MS TP region.
140 Converged Enhanced Ethernet Command Reference 53-1001762-01 show spanning-tree 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree Displays all Spanning T ree P r otocol information. Synopsis show spanning-tree Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 141 53-1001762-01 show spanning-t ree 9 DRAFT: BROCADE CONFIDENTIAL Designated Port Id: 0; CIST Priority: 128 Designated Bridge: 0000.
142 Converged Enhanced Ethernet Command Reference 53-1001762-01 show spanning-tree brief 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree brief Displays the status and paramet ers of the Spanning T ree Prot ocol. Synopsis show spanning-tre e brief Operands none Defaults There are no def ault configurations for this command.
Converged Enhanced Ethernet Command Reference 143 53-1001762-01 show spanning-tree interface 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree interface Displays the stat e of the Spanning T ree Prot ocol f or all named por t-channels or 1 0 Gbps Ethernet interfaces.
144 Converged Enhanced Ethernet Command Reference 53-1001762-01 show spanning-tree mst brief 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree mst brief Displays the status and paramet ers of the Mult iple Spanning T ree Protocol (MSTP) instance information in brief.
Converged Enhanced Ethernet Command Reference 145 53-1001762-01 show spanning-tree ms t detail 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree mst detail Displays details on an inter face f or the Multiple Spanning T ree Pro tocol (MSTP) instance running.
146 Converged Enhanced Ethernet Command Reference 53-1001762-01 show spanning-tree mst detail 9 DRAFT: BROCADE CONFIDENTIAL Designated Bridge: 0000.0000.
Converged Enhanced Ethernet Command Reference 147 53-1001762-01 show spanning-tree ms t detail 9 DRAFT: BROCADE CONFIDENTIAL Link-type: point-to-point Received BPDUs: 0; Sent BPDUs: 0 MSTI details.
148 Converged Enhanced Ethernet Command Reference 53-1001762-01 show spanning-tree mst instance 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree mst instance Displays inf ormation on a specified Multiple Spanning T ree Prot ocol (MSTP) instance.
Converged Enhanced Ethernet Command Reference 149 53-1001762-01 show spanning-tree mst interface 9 DRAFT: BROCADE CONFIDENTIAL show spanning-tree mst interface Displays inf ormation for a specified interface for a Multiple Spanning T ree Prot ocol (MSTP) instance.
150 Converged Enhanced Ethernet Command Reference 53-1001762-01 shutdown 9 DRAFT: BROCADE CONFIDENTIAL shutdown Disables the Multiple Spanning T r ee Pr otocol (MS TP), Rapid Spanning T ree (RSTP), or the Spanning T ree Prot ocol (STP) globally .
Converged Enhanced Ethernet Command Reference 151 53-1001762-01 spanning-tree autoedge 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree autoedge Enables automatic edge de tection. Synopsis spanning-tree autoedge no spanning-tree autoedge Operands none Defaults Aut o detection is not enabled.
152 Converged Enhanced Ethernet Command Reference 53-1001762-01 spanning-tree cost 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree cost Changes an interface's spanning-tree por t path cost. .Synopsis spanning-tree cost cos t Operands cost S pecifies th e path cost fo r the Spanning T ree Prot ocol (STP) calculations.
Converged Enhanced Ethernet Command Reference 153 53-1001762-01 spanning-tree edgeport 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree edgeport Enables the edge por t on an interface to allo w the inte r face to quic kly tran siti on to the fo rwa rdin g state.
154 Converged Enhanced Ethernet Command Reference 53-1001762-01 spanning-tree guard root 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree guard root Enables the guard r oot to restrict which inte r face is allow ed to be the spanning-tree r oot por t or the path-to-the r oot for the switch.
Converged Enhanced Ethernet Command Reference 155 53-1001762-01 spanning-tree hello-time 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree hello-time Configures the hello-time in seconds on the int er face.
156 Converged Enhanced Ethernet Command Reference 53-1001762-01 spanning-tree instance 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree instance Sets restrictions f or the por t of particular MSTP instance .
Converged Enhanced Ethernet Command Reference 157 53-1001762-01 spanning-tree link-type 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree link-type Enables and disables the rapid transi tion f or the Spanning T ree Protocol.
158 Converged Enhanced Ethernet Command Reference 53-1001762-01 spanning-tree portfast 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree portfast Enables the Por t F ast f eatu re on an int er face t o allow the interface to quickly transition to forwarding stat e.
Converged Enhanced Ethernet Command Reference 159 53-1001762-01 spanning-tree priority 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree priority Changes an interface's spa nning-tree por t priority .
160 Converged Enhanced Ethernet Command Reference 53-1001762-01 spanning-tree re stricted-role 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree restricted-role Restricts the role of the por t from becoming a root port. Synopsis spanning-tree restricted-role no spanning-tree restricted-r ole Operands none Defaults The restricte d role is disabled.
Converged Enhanced Ethernet Command Reference 161 53-1001762-01 spanning-tree restricted-tcn 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree restricted-tcn Restricts the topology change notification Bridge Pro tocol Data Units (BPDUs) se nt on the por t.
162 Converged Enhanced Ethernet Command Reference 53-1001762-01 spanning-tree shutdown 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree shutdown Enables or disables spanni ng tree on the int er face. Synopsis spanning-tree shutdown no spanning-tree shutdown Operands none Defaults Spanning tree is not enabled.
Converged Enhanced Ethernet Command Reference 163 53-1001762-01 spanning-tree tc-flush-standard 9 DRAFT: BROCADE CONFIDENTIAL spanning-tree tc-flush-standard Flushes the Media Access Control (MA C) address based on the optimal scheme.
164 Converged Enhanced Ethernet Command Reference 53-1001762-01 transmit-holdcount 9 DRAFT: BROCADE CONFIDENTIAL transmit-holdcoun t Configures the maximum number o f Bridge Protocol Data Units (BPDUs) transmitted per second f or the Multiple Spann ing T ree Protocol (MS TP) and the Rapid Spanning T ree Pr otocol RS TP .
Converged Enhanced Ethernet Command Reference 165 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 10 Internet Group Management Protocol Commands clear ip igmp group Clears information rela t ed to learne d gr oups in the IGMP prot ocol m odule. Synopsis clear ip igmp group [ A.
166 Converged Enhanced Ethernet Command Reference 53-1001762-01 clear ip igmp groups 10 DRAFT: BROCADE CONFIDENTIAL clear ip igmp groups Clears information rela t ed to learne d gr oups in the IGMP prot ocol m odule. Synopsis clear ip igmp groups Operands none Defaults There are no def aults for this command.
Converged Enhanced Ethernet Command Reference 167 53-1001762-01 debug ip igmp all 10 DRAFT: BROCADE CONFIDENTIAL debug ip igmp all Displays all IGMP inf ormation.
168 Converged Enhanced Ethernet Command Reference 53-1001762-01 ip igmp last-member-q uery-interval 10 DRAFT: BROCADE CONFIDENTIAL ip igmp last-member-qu ery-interval Sets the last member quer y int er val. Synopsis ip igmp last-member-quer y-interval milliseconds Operands milliseconds Response time in milliseconds .
Converged Enhanced Ethernet Command Reference 169 53-1001762-01 ip igmp query-interval 10 DRAFT: BROCADE CONFIDENTIAL ip igmp query-interva l Sets the query inter v al. Synopsis ip igmp quer y-interval second s Operands seconds Response time in seconds.
170 Converged Enhanced Ethernet Command Reference 53-1001762-01 ip igmp query-max-response-tim e 10 DRAFT: BROCADE CONFIDENTIAL ip igmp query-max-response -time Sets the query -max-respo nse-time. Synopsis ip igmp quer y-max-respons e-time seconds Operands seconds Response time in seconds.
Converged Enhanced Ethernet Command Reference 171 53-1001762-01 ip igmp snooping enable (global version) 10 DRAFT: BROCADE CONFIDENTIAL ip igmp snooping enable (global version ) Enables the Int ernet Group Management Pr otocol (IGMP) snooping for all VLAN interfaces.
172 Converged Enhanced Ethernet Command Reference 53-1001762-01 ip igmp snooping enable (VLAN version) 10 DRAFT: BROCADE CONFIDENTIAL ip igmp snooping enable (V LAN version) Enables the Internet Group Management Pr otocol (IGMP) snooping f or a specific VLAN inter face.
Converged Enhanced Ethernet Command Reference 173 53-1001762-01 ip igmp snooping fast-leave 10 DRAFT: BROCADE CONFIDENTIAL ip igmp snooping fast-l eave Enables snooping fast-leav e.
174 Converged Enhanced Ethernet Command Reference 53-1001762-01 ip igmp snooping mrouter 10 DRAFT: BROCADE CONFIDENTIAL ip igmp snooping mrouter Configures a VLAN por t member to be a multicast router int er face.
Converged Enhanced Ethernet Command Reference 175 53-1001762-01 ip igmp snooping mrouter-time out 10 DRAFT: BROCADE CONFIDENTIAL ip igmp snooping mrouter-timeo ut Configures the mrout er-time-out Synopsis ip igmp snoopin g mr outer-timeout seconds Operands seconds Timeout time in seconds.
176 Converged Enhanced Ethernet Command Reference 53-1001762-01 ip igmp snooping querier enable 10 DRAFT: BROCADE CONFIDENTIAL ip igmp snooping querie r enable Activ ates or deactivat es the IGMP snooping querier functionalit y for the VLAN.
Converged Enhanced Ethernet Command Reference 177 53-1001762-01 ip igmp static-group 10 DRAFT: BROCADE CONFIDENTIAL ip igmp static-group Configures the static gr oup membership entries. Synopsis ip igmp static-group A.B .C .D { int er face tengigabitethernet slot/por t | interface por t-channel number } no ip igmp static-group A.
178 Converged Enhanced Ethernet Command Reference 53-1001762-01 show debug ip igmp 10 DRAFT: BROCADE CONFIDENTIAL show debug ip igmp Displays the IGMP pac kets receiv ed and tr ansmitted, as w ell as related ev ents. Synopsis show debug ip igmp Operands none Description This command displa ys the IGMP packets receiv ed and transmitted.
Converged Enhanced Ethernet Command Reference 179 53-1001762-01 show ip igmp groups 10 DRAFT: BROCADE CONFIDENTIAL show ip igmp groups Displays inf ormation related t o learned groups in the I GMP protoc ol module. Synopsis show ip igmp groups [ A.B .
180 Converged Enhanced Ethernet Command Reference 53-1001762-01 show ip igmp snooping 10 DRAFT: BROCADE CONFIDENTIAL show ip igmp snooping Displays IGMP snooping inf ormation.
Converged Enhanced Ethernet Command Reference 181 53-1001762-01 show running-config igmp 10 DRAFT: BROCADE CONFIDENTIAL show running-config igmp Displays the IGMP configuration. Synopsis show running-conf ig igmp Operands none Description This command displays the IGMP contents of the currently running configuration.
182 Converged Enhanced Ethernet Command Reference 53-1001762-01 show running-config igmp 10 DRAFT: BROCADE CONFIDENTIAL.
Converged Enhanced Ethernet Command Reference 183 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 11 RMON Commands rmon alarm Sets alarm conditions. Synopsis rmon alarm index snmp_oid interval secon.
184 Converged Enhanced Ethernet Command Reference 53-1001762-01 rmon alarm 11 DRAFT: BROCADE CONFIDENTIAL switch(config)# rmon alarm 100 1.3.6.1.2.1.16.
Converged Enhanced Ethernet Command Reference 185 53-1001762-01 rmon collection stats 11 DRAFT: BROCADE CONFIDENTIAL rmon collection stats Collects Ethernet g r oup st atistics on an interface.
186 Converged Enhanced Ethernet Command Reference 53-1001762-01 rmon event 11 DRAFT: BROCADE CONFIDENTIAL rmon event Adds or remo ves an e vent in the RMON ev ent table associated t o th e RMON alarm number .
Converged Enhanced Ethernet Command Reference 187 53-1001762-01 show rmon 11 DRAFT: BROCADE CONFIDENTIAL show rmon Displays the current RMON status on the switch.
188 Converged Enhanced Ethernet Command Reference 53-1001762-01 show rmon 11 DRAFT: BROCADE CONFIDENTIAL Owner: RMON_SNMP Status: ok(1) T o display the RMON e vents: switch# show rmon events event Ind.
Converged Enhanced Ethernet Command Reference 189 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 12 QoS Commands cee Applies a CEE Pro visioning ma p on an int er face. Synopsis cee name no cee Operands name Specifies the name of a pre vio usly creat ed CEE m ap.
190 Converged Enhanced Ethernet Command Reference 53-1001762-01 cee-map 12 DRAFT: BROCADE CONFIDENTIAL cee-map Enters the CEE map configuration mode. If the CEE map does not exist, it creates the map.
Converged Enhanced Ethernet Command Reference 191 53-1001762-01 priority-group-table 12 DRAFT: BROCADE CONFIDENTIAL priority-group-table Configures the bandwidth f or each Priority Group.
192 Converged Enhanced Ethernet Command Reference 53-1001762-01 priority-table 12 DRAFT: BROCADE CONFIDENTIAL priority-table Pro visions the CE E P riority-to-Priority Group T able, this table maps each of the eight ingress CoS into a Priority Group.
Converged Enhanced Ethernet Command Reference 193 53-1001762-01 priority-table 12 DRAFT: BROCADE CONFIDENTIAL switch(config)# ceemap test switch(conf-ceemap)# priority-table 1 1 0 1 1 1 1 15.0 See Also cee , cee-map , priority -gr oup-table 51 61 71 5 .
194 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos cos 12 DRAFT: BROCADE CONFIDENTIAL qos cos Specifies the interface Class of Ser vice (CoS) value. Synopsis qos cos value no qos cos Operands val ue Specifies the CoS value. The range of valid values is 0-7 .
Converged Enhanced Ethernet Command Reference 195 53-1001762-01 qos cos-mu tation 12 DRAFT: BROCADE CONFIDENTIAL qos cos-mutation Applies a CoS-t o-CoS (COS) mutati on QoS map on an interface. Synopsis qos cos-mutation name no qos cos-mutation Operands name Specifies the name of the CoS mutation map.
196 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos cos-traffic-class 12 DRAFT: BROCADE CONFIDENTIAL qos cos-traffic-class Applies a CoS-t o-T raff ic Class QoS map on an int er face.
Converged Enhanced Ethernet Command Reference 197 53-1001762-01 qos map cos-mutat ion 12 DRAFT: BROCADE CONFIDENTIAL qos map cos-mutation Creates a QoS map f or per f orming CoS-to-CoS mutation.
198 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos map cos-mutation 12 DRAFT: BROCADE CONFIDENTIAL See Also qos cos-mutation , show qos maps.
Converged Enhanced Ethernet Command Reference 199 53-1001762-01 qos map cos-traffic-class 12 DRAFT: BROCADE CONFIDENTIAL qos map cos-traffic-class Creates a QoS map f or per forming CoS-t o-T raffic Class mapping. Synopsis qos map cos-tr af fic-class name tc0 tc1 tc2 tc3 tc4 tc5 tc6 tc7 no qos map cos-traf fic-class Operands .
200 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos map cos-traffic-class 12 DRAFT: BROCADE CONFIDENTIAL mTC0_WEIGHTmTC1_WEIGHTmTC2_WEIGHT mT C3_W EIGHT mT C4_WEIG HT mT C5_WEIGHT mTC6.
Converged Enhanced Ethernet Command Reference 201 53-1001762-01 qos queue multicast scheduler 12 DRAFT: BROCADE CONFIDENTIAL qos queue multicast scheduler Configures the multicast T raf fic Class packet e xpa nsion scheduler policy . All m ulticast T raf fic Class pack et expansion queues are ser viced Def icit Weight ed Round Robin (DWRR).
202 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos queue scheduler 12 DRAFT: BROCADE CONFIDENTIAL qos queue scheduler Configures the T raf fic Clas s packet scheduler policy .
Converged Enhanced Ethernet Command Reference 203 53-1001762-01 qos queue scheduler 12 DRAFT: BROCADE CONFIDENTIAL wei ght5 Sets the DWRR weight for T raf fic Class 6 in un its of bandwidth per centage lef t ov er af ter servicing all of the Strict Pr iority T raff ic Classes.
204 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos rcv-queue multicast rate-limit 12 DRAFT: BROCADE CONFIDENTIAL qos rcv-queue multicast rate-limit Configures a cap on the maxi mum rate f or multicast packe t expansion.
Converged Enhanced Ethernet Command Reference 205 53-1001762-01 qos rcv-queue mult icast threshold 12 DRAFT: BROCADE CONFIDENTIAL qos rcv-queue multicast threshold Configures a cap on the maximum queue d ept h for multicast packet e xpansion queues.
206 Converged Enhanced Ethernet Command Reference 53-1001762-01 qos trust cos 12 DRAFT: BROCADE CONFIDENTIAL qos trust cos Specifies the inter f ace QoS trust mode for incoming traf fic. Synopsis qos trust cos no qos trust Operands none Defaults The QoS trust CoS mode set to the untrusted stat e.
Converged Enhanced Ethernet Command Reference 207 53-1001762-01 show cee maps 12 DRAFT: BROCADE CONFIDENTIAL show cee maps Displays inf ormation on the defined CEE maps. Synopsis show cee maps name Operands name Restricts the output t o repor t on only the named CEE map.
208 Converged Enhanced Ethernet Command Reference 53-1001762-01 show qos flowcontrol interface 12 DRAFT: BROCADE CONFIDENTIAL show qos flowcontrol interface Displays all of the configured flow contr ol information for an int er face.
Converged Enhanced Ethernet Command Reference 209 53-1001762-01 show qos interface 12 DRAFT: BROCADE CONFIDENTIAL show qos interface Displays a summary of all Qo S configurations applied on an interface.
210 Converged Enhanced Ethernet Command Reference 53-1001762-01 show qos interface 12 DRAFT: BROCADE CONFIDENTIAL Traffic Class Scheduler configured for 0 Strict Priority queues TrafficClass: 0 1 2 3 .
Converged Enhanced Ethernet Command Reference 211 53-1001762-01 show qos maps 12 DRAFT: BROCADE CONFIDENTIAL show qos maps Displays inf ormation on the defined QoS maps. Synopsis show qos maps [{ cos-mutation [ name ] | cos-traffic-class [ name ]} ] Operands cos-mutation name Specifies to repor t on onl y t he named CoS-to-CoS mutation QoS map.
212 Converged Enhanced Ethernet Command Reference 53-1001762-01 show qos queue interface 12 DRAFT: BROCADE CONFIDENTIAL show qos queue interface Displays the runtime stat e retriev ed from the inte r face reflecting the number of pack ets and b ytes sent and received f or each priority .
Converged Enhanced Ethernet Command Reference 213 53-1001762-01 show qos rcv-queue interface 12 DRAFT: BROCADE CONFIDENTIAL show qos rcv-queue interface Displays a summary of all Qo S configurat ions applied t o a Layer 2 Inter face.
214 Converged Enhanced Ethernet Command Reference 53-1001762-01 show qos rcv-queue multicas t 12 DRAFT: BROCADE CONFIDENTIAL show qos rcv-queue multicast Displays the runtime stat e retriev ed from the data plane reflecting any multicast pack et expansion pack et drops resulting from a queue crossing the maximum queue de pth.
Converged Enhanced Ethernet Command Reference 215 53-1001762-01 DRAFT: BROCADE CONFIDENTIAL Chapter 13 Port Authentication Commands clear dot1x statistics Clears all dot1x statistics. Synopsis clear do t1x statistics Operands none Defaults There are no def aults for this command.
216 Converged Enhanced Ethernet Command Reference 53-1001762-01 clear dot1x statistics interface 13 DRAFT: BROCADE CONFIDENTIAL clear dot1x statistics interface Clears th e dot1x statistics for a por .
Converged Enhanced Ethernet Command Reference 217 53-1001762-01 dot1x authentication 13 DRAFT: BROCADE CONFIDENTIAL dot1x authentication Enables dot1x on a port. Synopsis dot1x authen tication no dot1x authenti cation Operands none Defaults There are no def aults for this command.
218 Converged Enhanced Ethernet Command Reference 53-1001762-01 dot1x enable 13 DRAFT: BROCADE CONFIDENTIAL dot1x enable Enables 802. 1X authentication globally . Synopsis dot1x enable no dot1x enable Operands none Defaults By default, authentication is disabled globally .
Converged Enhanced Ethernet Command Reference 219 53-1001762-01 dot1x port-control 13 DRAFT: BROCADE CONFIDENTIAL dot1x port-control Contr ols the authorizat ion of a por t stat e. Synopsis dot1x port-control auto | f orce-authorized | fo rce -u na u th or iz ed no dot1x port-control Operands auto Enables authentication on por t.
220 Converged Enhanced Ethernet Command Reference 53-1001762-01 dot1x quiet-period 13 DRAFT: BROCADE CONFIDENTIAL dot1x quiet-period Sets the number of seconds that a switch remains quiet between a failed authentication and an attempt t o retr y authentication.
Converged Enhanced Ethernet Command Reference 221 53-1001762-01 dot1x reauthenticate interface 13 DRAFT: BROCADE CONFIDENTIAL dot1x reauthenticate interface Initiates reauthentication on a specif ied int er face. Synopsis dot1x reauthenticate int er face name Operands name Specifies the name of the inter face.
222 Converged Enhanced Ethernet Command Reference 53-1001762-01 dot1x reauthentication 13 DRAFT: BROCADE CONFIDENTIAL dot1x reauthentication Enables reauthentication on a por t. Synopsis dot1x reauthenti cation Operands none Defaults There are no def aults for this command.
Converged Enhanced Ethernet Command Reference 223 53-1001762-01 dot1x reauthMax 13 DRAFT: BROCADE CONFIDENTIAL dot1x reauthMax Sets the maximum nu mber of times that a por t attem pts to reauthenticate.
224 Converged Enhanced Ethernet Command Reference 53-1001762-01 dot1x timeout re-authperiod 13 DRAFT: BROCADE CONFIDENTIAL dot1x timeout re-authperiod Sets the number of seconds between reauthorization atte mpts. Synopsis dot1x timeout re-aut hperiod seconds Operands seconds Specifies the seconds between reauthoriz ation attempts.
Converged Enhanced Ethernet Command Reference 225 53-1001762-01 dot1x timeout server-timeout 13 DRAFT: BROCADE CONFIDENTIAL dot1x timeout server-timeout Sets the authentication sev er response timeout.
226 Converged Enhanced Ethernet Command Reference 53-1001762-01 dot1x timeout supp- timeout 13 DRAFT: BROCADE CONFIDENTIAL dot1x timeout supp-timeout Sets the time in seconds that a switch waits f or a res p o nse to an Extensible Authentication Prot ocol (EAP) request frame fr om the clie nt before resending the request.
Converged Enhanced Ethernet Command Reference 227 53-1001762-01 dot1x time out tx-period 13 DRAFT: BROCADE CONFIDENTIAL dot1x timeout tx-period Sets the number of seconds that the switch waits f or a response to an Ext ensible Authentication Pro tocol (EAP) request or identity frame fr om the client be fore retransmi tting the request.
228 Converged Enhanced Ethernet Command Reference 53-1001762-01 show dot1x 13 DRAFT: BROCADE CONFIDENTIAL show dot1x Displays the o verall state o f dot1x on the system. Synopsis show dot1x Operands none Defaults There are no def aults for this command.
Converged Enhanced Ethernet Command Reference 229 53-1001762-01 show dot1x all 13 DRAFT: BROCADE CONFIDENTIAL show dot1x all Displays detailed inf ormation for all of the por ts. Synopsis show dot1x all Operands none Defaults There are no def aults for this command.
230 Converged Enhanced Ethernet Command Reference 53-1001762-01 show dot1x all 13 DRAFT: BROCADE CONFIDENTIAL See Also none.
Converged Enhanced Ethernet Command Reference 231 53-1001762-01 show dot1x diagnostics interface 13 DRAFT: BROCADE CONFIDENTIAL show dot1x diagnostics interface Displays all diagnostics inf ormation for the authenticator associat ed with a port. Synopsis show dot1x diagnostics inter f ace name Operands name Specifies the name of the inter face.
232 Converged Enhanced Ethernet Command Reference 53-1001762-01 show dot1x interface 13 DRAFT: BROCADE CONFIDENTIAL show dot1x interface Displays the state of a specified int er face. Synopsis show dot1x int er face name Operands name Specifies the name of the inter face.
Converged Enhanced Ethernet Command Reference 233 53-1001762-01 show dot1x session-info interface 13 DRAFT: BROCADE CONFIDENTIAL show dot1x sessio n-info interface Displays all statistical inf ormat ion of an established session. Synopsis show dot1x session-inf o inter face name Operands name Specifies the name of the inter face.
234 Converged Enhanced Ethernet Command Reference 53-1001762-01 show dot1x statistics interface 13 DRAFT: BROCADE CONFIDENTIAL show dot1x statistics interface Displays the statistics of a specified inter f ace. Synopsis show dot1x statistics interface name Operands name Specifies the name of the inter face f or which to display inf ormation.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Brocade Communications Systems 53-1001762-01 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Brocade Communications Systems 53-1001762-01 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Brocade Communications Systems 53-1001762-01, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Brocade Communications Systems 53-1001762-01 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Brocade Communications Systems 53-1001762-01, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Brocade Communications Systems 53-1001762-01.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Brocade Communications Systems 53-1001762-01. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Brocade Communications Systems 53-1001762-01 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
