Manuel d'utilisation / d'entretien du produit Lecacy du fabricant Briggs & Stratton
Aller à la page of 140
Parts Manual Rev. C L e c a c y / 2 0 0 0 / 2 9 0 0 Series Tractors & Mower Deck s Mf g . No. Descri p tion 20HP Produc t 169287 0 Lega cy, 20HP V-Twin 169287 1 Lega cy, 20HP LC Hy dr o 169311 4 L.
Not for Reproduction.
Table Of Content s PRODUCT COMPONENTS PAGES Frame & Transaxle Gro up ....................................................................................................... ............................ 4 Front Axle & Steering Gro up ..........
Frame & Transaxle Gr oup NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985115 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Frame & Transaxle Gr oup Footn ote s FRONT BUMPER ASSEMBLY 1 17184 78SM 1 CARRIAGE BOLT, 3/ 8-16 x 1-1/4 2 19602 68SM 4 LOCKWASHER, 3/8 3 19169 65SM 12 NUT, Hex, F.
Frame & Transaxle Gr oup NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985115 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Frame & Transaxle Gr oup Footn ote s SET SCREW, 1/4-20 x 5/16 41 1930545SM 1 SHAFT & HUB, Fan 42 1716256SM 1 FAN 43 1700814SM 1 WASHER, 1/4 44 1921319SM 1 LOCK.
Front Axle & Steeri ng Grou p NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985120 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Front Axle & Steeri ng Grou p Footn ote s CAP, Steering 1 17159 20SM 1 NUT, Hex, 5/8-18 2 19605 76SM 1 WASHER, 5/8 3 19243 66S M 1 WHEEL ASSEMBLY, Steering 4 17159.
Front Axle & Steeri ng Grou p NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985120 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Front Axle & Steeri ng Grou p Footn ote s RING, Retaining #98 41 2832577SM 1 SPACER, Tube Axle 42 1715762SM 2 WASHER, 1/2 43 1924361SM 2 CAPSCREW, Hex Head, 1/2-13.
Hydraulic Steering Unit - SERVICE PARTS NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1716257 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Hydraulic Steering Unit - SERVICE PARTS Footn ote s CAPSCREW 1 171871 3SM 7 CAP, End 2 17187 14SM 1 SEAL, O-ring 3 17187 15SM 3 SEAL 4 17187 16SM 1 O-RING 5 17187 17SM.
Engine Group - Air Cooled Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. E985755 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Engine Group - Air Cooled Models Footn ote s BELT, P.T.O. (Matched Set of 2 Belts) 1 17169 96SM 1 CAPSCREW, Hex Head, 7/16-2 x 3.
Engine Group - Air Cooled Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. E985755 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Engine Group - Air Cooled Models Footn ote s ROD, Anti Rotation 39 1717527SM 1 CLAMP 40 1712286SM 1 ELBOW, Exhaust 41 1719788SM 1 WASHER, 5/16 42 1960044SM 2 Note* See your local Kohler distributor for service parts. The above parts group ap plies to the following Mfg.
Engine Group - Liqu id Cooled Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. E985113 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Engine Group - Liqu id Cooled Models Footn ote s BELT, P.T.O. (Matched Set of 2 Belts) 1 17169 95SM 1 CAPSCREW, Hex Head, M10-1.
Engine Group - Liqu id Cooled Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. E985113 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Engine Group - Liqu id Cooled Models Footn ote s VOLTAGE REGULATOR 41 * 1 HOSE, Air Inlet 42 1717489SM 1 HOSE CLAMP 43 * 1 CAPSCREW, Hex Head, 8mm x 25 44 1960347SM 4 .
Drive Shaft - SERVICE PARTS NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1716482 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Drive Shaft - SERVICE PARTS Footn ote s SPRING LOCK REPAIR KIT (Neapco) 1 16866 03SM 1 SPRING LOCK REPAIR KIT (Weasler) 1 17184 75SM 1 YOKE ASSEMBLY (Neapco) 2* 1 YOKE.
Drive Shaft, Throttle, Choke & Seal - Air Cooled Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. ED85755 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Drive Shaft, Throttle, Choke & Seal - Air Cooled Models Footn ote s CONTROL, Throttle 1 16871 84SM 1 CAPSCREW, Plastite 2 19605 78S M 2 KNOB, Throttle 3 17158 97SM 1 KNOB, Choke 4 1716247 SM 1 NUT, Hex, #10-24 5 19605 91SM 1 CONTROL, Choke 6 17163 28SM 1 TIE 7 17010 11SM 1 DRIVESHAFT ASSEMBLY (Includes Ref.
Drive Shaft, Throttle, Choke & Seal - Liquid Cooled Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. ED85113 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Drive Shaft, Throttle, Choke & Seal - Liquid Cooled Models Footn ote s CONTROL, Throttle 1 16871 84SM 1 CAPSCREW, Plastite 2 19605 78S M 2 KNOB, Throttle 3 17158 97SM 1 KNOB, Choke 4 1716247 SM 1 NUT, Hex, #10-24 5 19605 91SM 1 CONTROL, Choke 6 17163 28SM 1 TIE 7 17010 11SM 1 DRIVE SHAFT ASSEMBLY (Includes Ref.
Front PTO Gr oup NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985116 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Front PTO Gr oup Footn ote s COVER, P.T.O. Shaft 1 1717632S M 1 RING, Retaining, 1.00 2 283257 7SM 2 WASHER, 1.0 3 19602 01S M 1 BEARING, Ball 4 17154 19SM 2 NUT, Hex,.
Hydraulic Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985118 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Hydraulic Group Footn ote s FITTING, Male, Straight 1 282 2522 SM 3 HOSE, Pump to Steer 2 1722510S M 1 FITTING, Hydrauli c 3 28244 03SM 1 ELBOW 4 16763 97SM 1 CLAMP, H.
Hydraulics Group - Auxiliary Lift - Diagram 2 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985457D2 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Hydraulics Group - Auxiliary Lift - Diagram 2 Footn ote s HOSE ASSEMBLY, 17" Long 8 5045503 2 HOSE ASSEMBLY, 50" Long 9 1719565 SM 2 HOSE SUPPORT 10 1719586S.
Hydraulics Group - Auxiliary Lift NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985457 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Hydraulics Group - Auxiliary Lift Footn ote s TIE, Self Locking 1 17010 11SM 3 PIN, Yoke 2 19602 77SM 1 PIN, Cotter 3 191845 2SM 3 ANGLING CYLINDER ASSEMBLY 4 16772 14.
Gearbox - SERVICE PARTS NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1717069 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Gearbox - SERVICE PARTS Footn ote s CAPSCREW, Hex Head, Whizlock, 5/16-18 x 3 /4 1 19305 91SM 12 CAP, Thru 2* 2 GASKET, 0.015 (Replace with Gasket of Identical Thickness) 3 17008 95SM A /R GASKET, 0.005 (Replace with Gasket of Identical Thickness) 3 17008 96SM A /R GASKET, 0.
Gearbox - SERVICE PARTS NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1719794 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Gearbox - SERVICE PARTS Footn ote s CAPSCREW, Hex Head, Whizlock, 5/16-18 x 3 /4 1 19305 91SM 12 CAP, Thru 2* 2 GASKET, 0.015 (Replace with Gasket of Identical Thickness) 3 17008 95SM A /R GASKET, 0.005 (Replace with Gasket of Identical Thickness) 3 17008 96SM A /R GASKET, 0.
Axle Housing SERVICE PART S - Peerless Model 2650-007 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1709736 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Axle Housing SERVICE PART S - Peerless Model 2650-007 Footn ote s HOUSING, Axle, 8-3/8" Long Peerless transmission parts must be ordered through your local Tecumseh/Peerless distributor. © Copyright 1998 Tecumseh Products Company.
Transaxle SERVICE PARTS - Peerless Model 2600-025 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1715820 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Transaxle SERVICE PARTS - Peerless Model 2600-025 Footn ote s Transaxle Cover (Includes Ref. Nos. 2A & 2B) Peerless transmission parts must be ordered through your l ocal Tecumseh/Peerless distributor. © Copyright 1998 Tecumseh Products Company.
Transaxle SERVICE PARTS - Peerless Model 2600-025 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1715820 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Transaxle SERVICE PARTS - Peerless Model 2600-025 Footn ote s Oil Seal 1 Peerless transmission parts must be ordered through your local Tecumseh/Peerless distributor. © Copyright 1998 Tecumseh Products Company. All Rights Reserved.
Brake Control & Parking Brake Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. P985107 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Brake Control & Parking Brake Group Footn ote s KNOB, Parking Brake 1 172 5277 SM 1 NUT, Hex #10-24 2 19605 91SM 1 ROD, Park Brake 3 171 7004 SM 1 CLIP, Rod 4 1717.
Brake Control & Parking Brake Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. P985107 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Brake Control & Parking Brake Group Footn ote s BRACKET, Caliper Mtg. 41 1715860SM 1 ROD, Brake 42 1716190SM 1 RIVET, Pop, 3/16 x 7/16 l g 43 1675044SM 2 ACTUATOR,.
Foot Control, Cruise & Differential Lock Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985107 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Foot Control, Cruise & Differential Lock Group Footn ote s KNOB, Cruise Control 1 17158 96SM 1 PIN, Cotter, 3/32 x 3/4 2 1 9184 47SM 4 SPRING, Torsion 3 17092 36S .
Foot Control, Cruise & Differential Lock Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985107 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Foot Control, Cruise & Differential Lock Group Footn ote s ROD, Cruise (To Lever Assembly) 41 1715842SM 1 CAPSCREW, 1/4-20 x 3/4 42 1921961SM 1 NUT, Hex Nylon Lock.
Two Speed Control Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. H985107 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Two Speed Control Group Footn ote s KNOB, Soft 1 171384 3SM 1 ROD, Two Speed 2 17158 23S M 1 CAPSCREW, Taptite, 5/16-18 x 1-1/2 3 19306 00SM 4 BEARING HALF, Nylon 4 16.
Electrical Group - Lower Harness - All Mo dels NOTE: Unless noted otherwise, use the standard hardware torque specification chart. L985109 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Electrical Group - Lower Harness - All Mo dels Footn ote s HARNESS, Rear (Models with Kohler Engines) 1 17170 94SM 1 HARNESS, Rear (Models with Kawasaki Engines) 1 171.
Electrical Group - Main Ha rness - Air Cooled Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. U985109 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Electrical Group - Main Ha rness - Air Cooled Models Footn ote s BEZEL, Headlight 1 171592 3SM 1 BULB, Headlight, Halogen 2 171 764 9SM 2 HARNESS, Headlight 3 171619 8.
Electrical Group - Main Harn ess - Liquid Cooled Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. U985110 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Electrical Group - Main Harn ess - Liquid Cooled Models Footn ote s BEZEL, Headlight 1 171592 3SM 1 BULB, Headlight, Halogen 2 171 764 9SM 2 HARNESS, Headlight 3 17161.
Hood, Dash & Footrest Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985117 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Hood, Dash & Footrest Group Footn ote s DASH, Upper 1 17159 05SM 1 CARRIAGE BOLT, 1/4-20 x 5/8 2 19602 52SM 4 LOCKWASHER, 1/4 3 19169 64SM 4 NUT, 1/4-20 4 19166 22.
Seat & Deck Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. K985117 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Seat & Deck Group Footn ote s SEAT 1 17159 12SM 1 SEAT BRACKET, RH 2 1716978 SM 1 NUT, Hex Nylock, 3/8-16 3 191 9439 SM 2 WASHER, 13/32 4 192494 0SM 2 SEAT BRACKET.
Fuel Tank Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. FT85117 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Fuel Tank Group Footn ote s TANK, Fuel 1 171591 6SM 1 CAP, Fuel Tank 2 17159 17SM 1 CLAMP, Hose 3 28601 12S M 1 ELBOW, Fuel Tank 4 1717076 SM 1 BUSHING, Fuel Tank Seal.
Implement Lift Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985119 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Implement Lift Group Footn ote s NUT, Hex, Full, 3/8-16 1 19169 50SM 6 LOCKWASHER, 3/8 2 19169 65SM 6 PLATE, Bearing 3 171881 6A 2 CARRIAGE BOLT, 3/ 8-16 x 1-1/2 4 192.
Wheels & Tires Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985122 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Wheels & Tires Group Footn ote s WHEEL & TIRE ASSEMBLY, Large Front, 18 x 8.5 - 8 Tires (Includes Ref. Nos. 2, 3, 4) 1 17154 14SM 2 WHEEL & TIRE ASSEMBLY, Small Front, 16 x 7.5 - 8 Tires (Includes Ref. Nos.
Decals Group - Brand & Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. B985756 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Decals Group - Brand & Model Footn ote s ICON, Simplicity 1 17176 92SM 2 DECAL, RH Stripe & Logo (Simplicity Models) 2 17227 73SM 1 DECAL, LH Stripe & Logo.
Decals Group - Safety & Common NOTE: Unless noted otherwise, use the standard hardware torque specification chart. C985756 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Decals Group - Safety & Common Footn ote s DECAL, Belt, Blade 1 1722180 SM 1 DECAL, Paint (Simplicity & AGCO Models) 2 17204 54SM 1 DECAL, Paint (Massey Ferguson Models) 2 171 7449 1 DECAL, Caution, Battery 3 17165 39S M 1 DECAL, Warning, P.
Heat Shield Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. I985117 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Heat Shield Group Footn ote s CAPSCREW, Hex Head Whizlock, 1/4-20 x 5 /8 1 19602 95SM 12 MOULDING, 5" 2 17181 34SM 2 SHIELD, Hood (Air Cooled Models Only) 3 17175.
Hydrostatic Pump - SERVICE PARTS NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1717052 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Hydrostatic Pump - SERVICE PARTS Footn ote s HOUSING ASSEMBLY (Includes Ref. Nos. 49, 43 & 44) 1 16789 75SM 1 SHAFT, Trunnion 2 16521 94SM 1 BEARING, Ball 3 16522 .
Hydrostatic Pump - SERVICE PARTS NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1717052 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Hydrostatic Pump - SERVICE PARTS Footn ote s PIN, Headless 41 1652185SM 2 GASKET 42 1652184SM 1 BEARING, Needle 43 1652251SM 2 SEAL, Up 44 1652234SM 2 WASHER 45 165223.
Tilt Assembly - SERVICE PARTS NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1716258 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. Tilt Assembly - SERVICE PARTS Footn ote s RING, Retaining 1 171 8742 SM 1 WASHER 2 17187 43SM 1 WASHER, Spring Wave 3 171 5202 SM 1 BUSHING 4 17187 39SM 2 SUPPORT, Whe.
48" Mower Deck - Baff le & Inner Roller Gr oup NOTE: Unless noted otherwise, use the standard hardware torque specification chart. BF85507 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 48" Mower Deck - Baff le & Inner Roller Gr oup Footn ote s NUT, Hex Centerlock, 5/16-18 1 19233 62SM 2 BRACKET & SHAFT ASSEMBLY, Inner 2 210 8454 ASM 1 RO.
48" Mower Deck - Baffles (Export Models) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1687641 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 48" Mower Deck - Baffles (Export Models) Footn ote s BAFFLE, RH 1 17185 66SM 1 BAFFLE, LH 2 17185 65SM 1 CARRIAGE BOLT, 3/8-16 x 1 3 19313 50SM 3 LOCKWASHER, 3/8 4 19169 65SM 3 NUT, 3/8-16 5 19169 50SM 3 The above parts group ap plies to the following Mfg.
48" Mower Deck - Deflector & Stone Guard Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985503 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 48" Mower Deck - Deflector & Stone Guard Group Footn ote s NUT, Hex, 3/8-16 1 19169 50SM 7 LOCKWASHER, 3/8 2 19169 65SM 7 BRACKET 3 16762 03A 1 CAPSCREW, Hex .
48" Mower Deck - Drive, Belt , Arbor & Blade Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985163 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 48" Mower Deck - Drive, Belt , Arbor & Blade Group Footn ote s BELT, Deck, Double V 1 1675342S M 1 GEAR BOX (See Gear Box Service Parts ) 2 17170 69SM 1 KEY 3.
48" Mower Deck - Drive, Belt , Arbor & Blade Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985163 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 48" Mower Deck - Drive, Belt , Arbor & Blade Group Footn ote s SPACER 41 1674669SM 1 SPRING, Extension 42 1674671SM 1 NUT, Hex Lo ck, 5/16-18 43 1923362SM 1 R.
48" Mower Deck - Height Adjust & Hitc h Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. J985505 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 48" Mower Deck - Height Adjust & Hitc h Group Footn ote s MOTOR, Electric Cu tt ing Height Adjust 1 17158 85SM 1 CAPSCREW, Hex Washer Head, Taptitek, 5/16-18 .
48" Mower Deck - Height Adjust & Hitc h Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. J985505 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 48" Mower Deck - Height Adjust & Hitc h Group Footn ote s SHAFT, Hitch 41 1719567 1 HITCH & SHAFT ASSEMBLY 42 * 1 CAPSCREW, Hex Washer Head, Taptite 5/16-18 x 3/4 Black 43 1960541SM 1 Note* If replacing bracket {Ref 42} on units prior to SN 60000, order PN 1719867 {Ref 35}.
48" Mower Deck - Housing, Cover & G auge Wheel Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985507 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 48" Mower Deck - Housing, Cover & G auge Wheel Group Footn ote s HOUSING, 48" Mower Deck (Orange) 1 16867 31SM 1 HOUSING, 48" Mower Deck (Red) 1 4 1.
48" Mower Deck - Roller Ba r Group - (Serial No. 1 to 59999) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. S085505 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 48" Mower Deck - Roller Ba r Group - (Serial No. 1 to 59999) Footn ote s ROCKER SHAFT ASSEMBLY 1 17159 26A SM 1 CARRIAGE BOLT, 3/ 8-16 x 1-3/4 2 19313 53SM 2 WASH.
48" Mower Deck - Roller Bar Gr oup - (Serial No. 60000 and a bove) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. S685505 The above parts group ap plies to the following Mfg. Nos.: 102 2009 Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO QTY. 48" Mower Deck - Roller Bar Gr oup - (Serial No. 60000 and a bove) Footn ote s ROCKER SHAFT ASSEMBLY 1 17159 26A SM 1 CARRIAGE BOLT, 3/ 8-16 x 1-3/4 2 19313 53SM .
48" Mower Deck - Roller Bar Gr oup - (Serial No. 60000 and a bove) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. S685505 The above parts group ap plies to the following Mfg. Nos.: 104 2009 Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO QTY. 48" Mower Deck - Roller Bar Gr oup - (Serial No. 60000 and a bove) Footn ote s NUT, Toplock Spiral Flange, 3/8-16 39 2860681SM 4 The above parts group ap plies to the following Mfg. Nos.: 105 2009 Milwaukee, WI, USA.
54" Mower Deck - Drive, Belt , Arbor & Blade Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985631 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 54" Mower Deck - Drive, Belt , Arbor & Blade Group Footn ote s GEAR BOX, 54" Mower Deck (See Gear Box Service Parts ) 1 17197 94SM 1 BRACKET, U, 5-1/2 x .
54" Mower Deck - Drive, Belt , Arbor & Blade Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985631 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 54" Mower Deck - Drive, Belt , Arbor & Blade Group Footn ote s BLADE, Mower, 20-1/2 (S/N 60000 and above) 40 1687017SM 2 WASHER, Spline 41 1679711SM 3 WASHER,.
54" Mower Deck - Height Adjust & Hitc h Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. J985629 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 54" Mower Deck - Height Adjust & Hitc h Group Footn ote s MOTOR, Electric Cu tt ing Height Adjust 1 17158 85SM 1 BRACKET 2 17201 38SM 1 LOCKWASHER, 1/4 3 1916.
54" Mower Deck - Housing, Cover & G auge Wheel Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985628 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 54" Mower Deck - Housing, Cover & G auge Wheel Group Footn ote s ARM, Adjusting 1 16868 68S M 2 NUT, Hex, Jam, 5/8-18 2 192 2014 SM 6 WASHER, 5/8 3 19243 66S .
54" Mower Deck - Roll er Bar G roup NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985629 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 54" Mower Deck - Roll er Bar G roup Footn ote s WASHER, 1 1 28606 26SM 14 ROLLER 2 16780 43S M 11 SPACER, Short 3 17018 73SM 1 PIN, Cotter, 3/16 x 1-1/2 4 19184 5.
60" Mower Deck - Baff le & Inner Roller Gr oup NOTE: Unless noted otherwise, use the standard hardware torque specification chart. BF85506 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 60" Mower Deck - Baff le & Inner Roller Gr oup Footn ote s NUT, Hex Centerlock, 5/16-18 1 19233 62SM 3 BRACKET & SHAFT ASSEMBLY, Inner 2 167 6404 ASM 1 RO.
60" Mower Deck - Baffles (Export Models) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1686742 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 60" Mower Deck - Baffles (Export Models) Footn ote s BAFFLE, LH 1 17185 67AS M 1 BAFFLE, RH 2 17185 68AS M 1 CAPSCREW, Hex Head, 3/8-16 x 1 3 192 1210 SM 2 LOCKWASHER, 3/8 4 19169 65SM 2 NUT, 3/8-16 5 19169 50SM 2 The above parts group ap plies to the following Mfg.
60" Mower Deck - Deflector & Stone Guard Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985502 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 60" Mower Deck - Deflector & Stone Guard Group Footn ote s NUT, Hex, 3/8-16 1 19169 50SM 5 LOCKWASHER, 3/8 2 19169 65SM 5 ROD, Hinge 3 17003 43S M 1 DEFLECTOR.
60" Mower Deck - Drive, Belt , Arbor & Blade Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985162 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 60" Mower Deck - Drive, Belt , Arbor & Blade Group Footn ote s BELT, Deck, Double V 1 1716959S M 1 GEAR BOX (See Gear Box Service Parts ) 2 17170 69SM 1 KEY 3.
60" Mower Deck - Drive, Belt , Arbor & Blade Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985162 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 60" Mower Deck - Drive, Belt , Arbor & Blade Group Footn ote s BUSHING 41 1676148SM 2 SPACER 42 1674669SM 1 IDLER ARM ASSEMBLY 43 1716961ASM 1 FITTING, Lube 4.
60" Mower Deck - Height Adjust & Hitc h Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. J985504 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 60" Mower Deck - Height Adjust & Hitc h Group Footn ote s MOTOR, Electric Cu tt ing Height Adjust 1 17158 85SM 1 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x.
60" Mower Deck - Height Adjust & Hitc h Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. J985504 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 60" Mower Deck - Height Adjust & Hitc h Group Footn ote s SPACER 40 1715871SM 2 SHAFT, Hitch 41 1719567 1 BRACKET, Front Mower Hitch 42 * 1 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4, Black 43 1960541SM 1 Note* If replacing bracket {42} on units prior to SN 60000, order PN 1719567 {Ref 35}.
60" Mower Deck - Housing, Cover & G auge Wheel Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985506 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 60" Mower Deck - Housing, Cover & G auge Wheel Group Footn ote s HOUSING, 60 Mower Deck (Red) 1 16871 62S M 1 HOUSING, 60 Mower Deck (Solar Black) 1 16871 42S.
60" Mower Deck - Roller Ba r Group - (Serial No. 1 to 59999) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. S085504 The above parts group ap plies to the following Mfg.
PART NO. DESCRIPTION REF NO QTY. 60" Mower Deck - Roller Ba r Group - (Serial No. 1 to 59999) Footn ote s ROCKER SHAFT ASSEMBLY 1 17158 77A SM 1 CARRIAGE BOLT, 3/8-16 x 1 3/4 2 1931353S M 2 WASHE.
60" Mower Deck - Roller Bar Gr oup - (Serial No. 60000 and a bove) NOTE: Unless noted otherwise, use the standard hardware torque specification chart. S685504 The above parts group ap plies to the following Mfg. Nos.: 134 2009 Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO QTY. 60" Mower Deck - Roller Bar Gr oup - (Serial No. 60000 and a bove) Footn ote s ROCKER SHAFT ASSEMBLY 1 17158 77A SM 1 CARRIAGE BOLT, 3/8-16 x 1 3/4 2 1931353S M 2.
Not for Reproduction.
Not for Reproduction.
Not for Reproduction.
in/lbs ft/lbs 3 T orque Specification Chart FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%) Property Class Class 8.8 Class 10.9 Class 12.9 Size Of Hardware Nm. Nm. Nm. Nm. M3 1.28 2.90 5.75 9.9 16.5 24 48 83 132 200 275 390 530 375 995 1350 1830 2360 3050 13.
3515 N. 124 Stree t / PO B ox 702 Wauwatosa, WI 53222 USA 2009 Milwaukee, WI, USA. All rights reserved Briggs & Stratton Yard Power Products Group © Copyright by Briggs & Stratton Corporat ion IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Briggs & Stratton Lecacy c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Briggs & Stratton Lecacy - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Briggs & Stratton Lecacy, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Briggs & Stratton Lecacy va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Briggs & Stratton Lecacy, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Briggs & Stratton Lecacy.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Briggs & Stratton Lecacy. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Briggs & Stratton Lecacy ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
