



Thank you for your purchase. We look forward to being part of your home for decades to come. As a third-generation family-owned company, we take a very personal stake in the preparation of your family’s food. We built our business and our reputation on helping families serve the finest food possible.
With your purchase, you receive one of the strongest warranties in the appliance industry. Take a moment to read the full warranty statement on page 23. It’s also important to register your Wolf appliance to ensure that you don’t miss out on exclusive owner ben- efits, such as; assurance that you will be taken care of in the unlikely event that service becomes necessary during the warranty period, and a proof-of-purchase record in case of a home insurance claim. You may register by one of the following options:
As a Wolf owner, you can count on ongoing support, day in and day out. Our customer care center is available 24 hours a day, seven days a week and staffed by knowledgeable product experts at our factory in Madison, Wisconsin. Should the need arise, simply call 800-222-7820 and speak with one of our product experts. They will help troubleshoot any issues you might have.
We are confident this guide will answer your questions about the features, operation, and maintenance of your Wolf, but if you have additional questions, please contact us at 800-222-7820 or visit us online at wolfappliance.com.

IMPORTANT INSTRUCTIONS


IMPORTANT INSTRUCTIONS
GENERAL SAFETY PRECAUTIONS

IMPORTANT INSTRUCTIONS

IMPORTANT INSTRUCTIONS
CALIFORNIA PROPOSITION 65
COMMONWEALTH OF MASSACHUSETTS
This product may contain chemicals known to the state of California to cause cancer or reproductive harm.

Induction Range Features
Getting Started
FEATURES
We know you are eager to start cooking, but before you do, please take some time to read this use & care guide. Whether you are an occasional cook or an expert chef, it will be to your benefit to familiarize yourself with the safety practices, features, operation and care recommendations of your Wolf induction range.
1 Product Rating Plate
2 Oven Control Panel (press to access)
3 Oven Cooking Mode Selector Knob
4 Oven Temperature Control Knob
In induction cooking, the electricity flows through a coil to produce a magnetic field under the glass-ceramic surface. When an induction-compatible pan is placed on the cooking surface, currents are induced in the pan and instant heat is generated. Cookware made of magnetic materials, such as cast iron or magnetic stainless steel is required for induction cooking.
6 Surface Control Panel
To ensure all residual oil from the manufacturing process has been removed, clean the range thoroughly with hot water and mild detergent prior to use. Rinse and dry with a soft cloth. Refer to care recommendations on page 20.

To ensure the best results, review cooking modes and special features on page 12.

Do not place cookware on the oven floor or use aluminum foil or other material to line the oven floor or side walls. Failure to adhere to this notice will damage the porcelain interior and will void your warranty.
36" induction range shown.
30" RANGE W 101/2" (267) 2600 | 3150 boost (2) 8" (203) 2100 | 3000 boost 6" (152) 1400
36" RANGE W 101/2" (267) 2600 | 3700 boost (4) 8" (203) 2100 | 3000 boost
5 Convection Oven · 7 Induction Element · 8 Bridge Element

OVEN RACK GUIDES
The bottom oven rack has a full-extension capability which is supported by the oven door. With the rack in the lowest rack guide position, slide it onto the door guides for greater stability and accessibility. Refer to the illustration below.
To insert the rack guides in the oven, locate the mounting screws on the oven side walls. Place the rack guide mounting tabs over the screws and slide down until fully seated. Refer to the illustration below.
To insert a full-extension easy glide rack, place the two rear tabs onto the rack guide (one tab above and one below). Refer to the illustration below. Angle the rack slightly and slide back until the front rack notch engages the front rack guide.
To insert a standard rack in the oven, place the rack anti-tip lock under the side rack guide rails. Slide the rack back and lift up to clear the rack stops. Continue to slide the rack back until completely inside the oven. Refer to the illustra- tion below.


Wolf induction ranges utilize a combination of a cooking mode selector knob, oven temperature control knob and electronic control panel to select desired cooking modes, oven temperature and exclusive features. Open the control panel by pressing .
The oven light turns on automatically when the door is open and off when closed. To turn the light on while the door is closed, touch OVEN LIGHT on the control panel.
Temperatures are displayed in Fahrenheit. To change to Celsius, touch and hold CLOCK for 5 seconds. Touch COOK TIME to alternate between °F and °C, then touch ENTER.
During preheat, the oven is heated as quickly and evenly as possible and is not ideal for cooking. Preheat should be utilized for all cooking modes except broil and con- vection broil. During preheat, temperatures below 150°F
When using the oven, Wolf has created a two-step process to ensure it is never accidentally turned on:
(65°C) appear as ‘Lo’. Once preheat is complete, an audible chime indicates the oven has reached set temperature and the oven indicator light is no longer illuminated. To adjust temperature once preheat is complete, turn the knob to the desired temperature.
1 Rotate cooking mode selector knob to desired cooking mode. Convection modes are indicated by . Refer to the illustration below. Once desired cooking mode is selected, a preset temperature will appear on the tem- perature control knob.
2 Select the preset temperature by touching ENTER on the control panel or turn temperature control knob to increase or decrease temperature. Either action com- pletes the second step of the process. Oven indicator light illuminates and preheat begins.
To ensure all residual oil from the manufacturing process has been removed, each oven must go through the fol- lowing procedure.
1 Clean oven thoroughly with hot water and mild deter- gent. Rinse and dry with a soft cloth.

2 Turn on ventilation. Some smoke and odor is normal.
3 Rotate mode selector knob to ROAST and adjust tem- perature to 550°F (290°C) for one hour.
4 Rotate mode selector knob to OFF and allow oven to cool with the door closed.

TIMER
The clock is visible on the control panel during all cooking modes, except when the timer is in use. It is very important the clock is set to the correct time if the cook time or stop time feature is used. The clock must be reset after a power outage.
The timer on the oven control panel can be set for a maximum of 9 hours, 59 minutes. Once a time is set, the countdown is illuminated on the control panel display. The last minute counts down in seconds. The timer is indepen- dent from the oven. Setting the timer does not affect cook time or stop time. For information regarding auto program features, refer to page 14.
Setting clock:
1 Touch CLOCK on the control panel.
Setting timer:
2 Use up and down arrows to set time of day. Time will change from am to pm by passing 12:00.
1 Touch TIMER on the oven control panel.
2 Use up and down arrows to set time in hours and minutes.
3 Touch CLOCK. An audible chime indicates time has been set.
3 Touch TIMER to start. An audible chime indicates timer has been set. Oven will chime and time will flash when complete. Timer will continue to chime until CLEAR is touched on the control panel.
4 To change to 24-hour clock, press and hold CLOCK for 5 seconds. Touch CLOCK, then ENTER.
The range is shipped in standby power mode which dis- ables the clock approximately 10 minutes after the cooling fan operation is complete or the oven is inactive. The clock will illuminate after any touch of the controls or oven use.
Enable | disable standby power:
1 Touch and hold CLOCK on the control panel for 5 seconds.
2 Touch STOP TIME to toggle on or off, then touch ENTER.

MODE MODE KNOB PRESET RANGE PROBE USES
170 – 550°F
(75 – 290°C)
Convection Bake BAKE 375°F
(75 – 290°C)
Convection Broil BROIL Br1 Br2 Br3
Shortens broiling times for thicker cuts of meat, fish and poultry. Utilize two-piece broiler pan and always broil with oven door closed.
Convection Roast ROAST 325°F
(75 – 290°C)
170 – 550°F
(75 – 290°C)
Broil BROIL Br1 Br2 Br3
Best for broiling meats, fish and poultry pieces up to 1" thick. Utilize two-piece broiler pan and always broil with oven door closed.
(75 – 290°C)
Bake Stone STONE 400°F
(75 – 290°C)
110 – 160°F
Dry a variety of fruits, vegetables and meats. Accessory racks required. Refer to page 13.
(45 – 70°C)
Self-Clean CLEAN Oven heats to an extremely high temperature to allow food soil to burn off. Refer to page 14.
O
F
F
B
B
A
K
A
K
E
B
R
R
O
O
B
T
R
A
S
O
O
S
A
R
T
S
N
O
O
T
E
N
N
A
E
Cooking mode selector knob.

Temperature Probe
Setting controls:
The temperature probe measures the internal temperature of food while cooking. It can be used with all cooking modes except broil and convection broil.
1 Rotate mode selector knob to BAKE.
2 Turn temperature control knob left until ‘PrF’ is dis- played, then release.
Setting controls:
3 Oven temperature is preset to 85°F (30°C). Touch ENTER to select preset temperature or turn temperature control knob to change temperature. Display alternates between set temperature and ‘PrF.’
1 Rotate mode selector knob to desired cooking mode.
2 Touch ENTER to select preset temperature or turn tem- perature control knob to change temperature.
3 Insert probe into the thickest area of food. When making bread, cook for approximately 10 minutes before inserting probe.
Accessory kit required. Accessories are available through an authorized Wolf dealer. For local dealer information, visit the find a showroom section of our website, wolfappliance.com.
4 When preheat is complete, use a pot holder to lift probe receptacle cover, then insert probe. Refer to the illustra- tion below.
5 Probe temperature is preset to 160°F (70°C). Touch ENTER to select preset temperature or turn temperature control knob to change temperature. Display alternates between oven set temperature and actual probe temper- ature. To alternate between probe set point and actual probe temperature, press PROBE. Temperatures below 70°F (20°C) are displayed as ‘Lo.’
Setting controls:
1 Place door stop supplied with accessory kit, onto oven door lock.
2 Rotate mode selector knob to CONV.
3 Turn temperature control knob left until ‘dEH’ is dis- played, then release.
6 An audible chime indicates internal temperature has reached probe set point. Remove, then reinsert probe to verify internal temperature.
4 Oven temperature is preset to 110°F (45°C). Touch ENTER to select preset temperature or turn temperature control knob to change temperature. Display alternates between set temperature and ‘dEH.’
Probe and probe receptacle will be very hot. Handle with care.


Self-Clean
TIMED COOK
During self-clean, the oven is heated to an extremely high temperature to burn off food soil. Remove all oven racks and rack guides. They will discolor if left in during self-clean. The oven door will lock and remain locked until self-clean is complete and oven temperature has cooled below 300°F
Timed cook automatically turns the oven off at a specified time. The oven will begin to heat immediately and will turn off at the desired stop time. The clock must be set to the correct time for timed cook to function properly. Use in any cooking mode except broil, convection broil and bake stone.
(150°C). Self-clean times include one hour for cool down.
Setting controls for 4-hour self-clean:
Setting controls:
1 Rotate mode selector knob to CLEAN.
1 Rotate mode selector knob to desired cooking mode.
2 Touch ENTER.
2 Touch ENTER to select preset temperature or turn tem- perature control knob to change temperature.
Setting controls for 3-hour self-clean:
1 Rotate mode selector knob to CLEAN.
3 Touch COOK TIME. Use arrows to select desired cook time in hours and minutes.
2 Touch STOP TIME.
3 Touch down arrow to reduce stop time by 1 hour.
4 Touch ENTER.
4 Touch ENTER twice.
CAUTION
Delayed start automatically turns the oven on and off at specified times. The oven will remain idle until the desired start time and will turn off at the desired stop time. The clock must be set to the correct time for delayed start to function properly. Use in any cooking mode except broil, convection broil and bake stone.
During self-clean, exterior surfaces may get hotter than usual. Children should be kept away.
Setting controls:
1 Rotate mode selector knob to desired cooking mode.
2 Touch ENTER to select preset temperature or turn tem- perature control knob to change temperature. If ENTER is touched, oven will begin to heat immediately, but will enter idle mode once stop time is set.
3 Touch COOK TIME. Use arrows to select desired cook time in hours and minutes.
4 Touch STOP TIME. Use arrows to select desired time oven should turn off.
5 Touch ENTER.

Oven Light
This appliance is certified by Star-K to meet strict religious regulations in conjunction with specific instructions found on www.star-k.org
Verify power is disconnected from the electrical box before replacing a light bulb.
Sabbath overrides the automatic 12-hour shut off feature. Sabbath must be reset after a power outage.
Allow the oven to cool completely, then remove oven racks and rack guides. To remove the light cover, gently pry the bottom edge with a flat screwdriver. Remove the existing bulb and replace with a 20-watt halogen bulb. Refer to the illustration below.
Setting controls:
1 Turn oven light on or off.
2 Rotate mode selector knob to BAKE or ROAST and select desired temperature.
3 Touch and hold ENTER for 5 seconds. ‘SAb’ will appear and flash on oven control knob indicating Sabbath mode has been initiated.
4 To change oven temperature while in Sabbath mode, turn temperature control knob. Each turn will increase or decrease temperature by 10° (F or C). Display and audible chime are disabled, but temperature will ran- domly change after new temperature is selected. Oven will remain on until mode selector knob is rotated to OFF.
Light bulb replacement.

Surface Operation
CONTROL PANEL
CAUTION
The control panel features illuminated touch controls that are invisible when the cooking surface is off. A power level indicator for each control displays the heat setting from SIM (MLT) to HI. Each control is positioned to the corresponding induction element. Refer to the illustration below.
Do not place hot cookware directly over the control panel.

Indicators on the control panel will illuminate to indicate specific surface operation. Refer to the chart below.
The control panel lock feature prevents unwanted surface operation. Touch and hold LOCK for three seconds to lock and unlock the control panel. will illuminate when the control panel is locked.
The control panel will automatically lock after 10 minutes of inactivity. This automatic lock feature can be disabled through the extended options menu. Refer to page 19.
When the range is powered up for the first time and after a power outage, the induction surface will default to lock mode.

Surface Operation
POWER LEVEL INDICATOR
SINGLE ELEMENT | INNER ZONE
When an element is activated, a power level indicator will illuminate above the corresponding control indicating the level of heat. The lowest heat is represented by the small flame, varying levels of heat by additional indicators (dots), and the highest heat by all indicators including the large flame. Refer to the chart and illustration below.
Setting controls:
1 To activate a induction element, touch ON/OFF for the desired single element on the control panel. Power level indicator will flash and all indicators for that zone will flash. Refer to the illustration below.

2 To complete the activation, touch HI for highest heat, SIM (MLT) for lowest heat, BOOST to activate boost mode, or touch desired power level indicator.
3 To change heat setting while the element is on, touch or slide to desired power level.
Medium 6–7 indicators Making French toast and pancakes, heating milk, cream sauces, soups and gravies.

Surface Operation
BOOST MODE
BRIDGE ELEMENT
Boost mode boosts power on one element by diverting power from an adjacent element. If the adjacent element is on high, the power output will be reduced. The reduction in power will be displayed on the power level indicator of the adjacent element. Refer to the illustration below. will illuminate when an element is in boost mode.
Setting controls:
1 To activate bridge, select desired power level on one of the single elements.
2 Touch BRIDGE between corresponding element con- trols to bridge elements front to back, BRG to bridge elements side to side, or ALL BRIDGE to bridge all elements. , or will illuminate respectively.
Boost mode will deactivate automatically after approxi- mately 15 minutes of continuous operation and can be reactivated if desired.
3 To change power level, adjust the power level on any active bridged element.
4 To turn off, touch ON/OFF on any active bridged element.
ALL BRIDGE should be used for cookware larger than 12" (305) in diameter. For smaller cookware, use the right rear element.
The bridge element provides an oblong heating area for use with a griddle, open roaster or fish poacher.
To preheat a griddle, set the bridge element power level to high for five minutes, then reduce for cooking.
Boost mode.
A griddle, open roaster or fish poacher should not be used when the bridge element is off or with any other combination of heating elements.

Surface Operation
TIMER
EXTENDED OPTIONS
The surface timer can be set in one-minute increments up to 99 minutes. Once a time is set, will illuminate on the surface control panel and the countdown is visible on the timer display. The timer is independent from the cooking surface. Refer to the illustration below.
The extended options feature allows the user to set pref- erences for volume, tone and surface control panel lock feature.
Setting adjustment:
1 While unit is off and unlocked, touch and hold ALL OFF for five seconds.
Setting timer:
2 Power level 1 on the rear element control will be dis- played and ‘VO’ will appear on the timer display.
1 Touch TIMER.
2 Touch and hold + or – until desired time is shown in the timer display. Timer will begin the countdown in minutes.
Touch SIM (MLT) or HI on the front element control to adjust volume.
3 Timer will chime with one minute left and completes the countdown in seconds.
3 Touch + on the timer control to adjust tone. Power level 2 on the rear element control will be displayed and ‘Fr’ will appear on the timer display.
4 When complete, timer will chime and continue to chime until TIMER is touched.
Touch SIM (MLT) or HI on the front element control to adjust tone.
4 Touch + on the timer control to adjust the automatic control panel lock. Power level 3 on the rear element control will be displayed and ‘Lo’ will appear on the timer display.
will illuminate on the surface control panel and may remain illuminated even when the induction surface is off.
Touch SIM (MLT) or HI on the front element control to turn the automatic lock feature off or on respectively.
When one or more induction elements are on, will illu- minate on the surface control panel. To turn off all elements at the same time, touch ALL OFF. Refer to the illustration below.
5 Touch ALL OFF at any time while in extended options to confirm settings and return to idle.
ALL OFF
Timer controls.
All off.

Care Recommendations
CLEANING
Stainless steel Use a nonabrasive stainless steel cleaner and apply with a soft lint-free cloth. To bring out the natural luster, lightly wipe surface with a water-dampened microfiber cloth followed by a dry polishing chamois. Always follow the grain of stainless steel.
Glass-ceramic surface Allow to cool. Use a spray degreaser to remove fingerprints and a non-abrasive Ceran® cooktop cleaner for food soil. Do not allow any item that could melt to come in contact with the glass-ceramic surface when hot. If this occurs, use the razor blade scraper provided with the range to remove.
Control panel Use a spray degreaser to remove fingerprints and food soil. Spray on a cloth before wiping panel.
Control knobs Using a damp cloth, wipe with a mild detergent or spray degreaser; rinse and dry. Do not place in dishwasher.
Oven rack guides Remove and place on a flat surface near the sink. Clean with hot water and mild detergent or paste of baking soda and water. Do not immerse in water. Towel dry.
Oven interior Before utilizing the self-clean feature, use a razor blade to gently lift baked on foods from the oven cavity and window. For stubborn stains, spray with a mild abrasive cleaner or spray degreaser and scrub with a no-scratch Scotch-Brite™ pad (pink or blue). Wash the entire oven cavity with soap and water to remove cleaning chemicals before entering self-clean mode. If residue is not cleaned from the cavity, etching of the porcelain may occur. Once the self-clean cycle is complete, allow the oven to cool completely and wipe out ash with a damp cloth.
Broiler pan To clean the upper rack, use a mild detergent and scouring pad. Rinse and dry. To clean the bottom pan, discard grease and wash with hot water and mild detergent. Rinse and dry. The stainless steel upper rack is dishwasher safe, however, do not place any porcelain-coated rack or pan in dishwasher.

Troubleshooting
OPERATION
Oven ‘pops’ or ‘bangs’ during preheat or cool down.
Range does not operate.
Induction elements do not operate.
Clock display turns off.
Oven temperature issue.
Surface temperature issue.
No control knob display.
No response from oven control panel touch pads.
‘SAb’ displayed on temperature control knob.
‘PF’ displayed on temperature control knob.
‘OE’, ‘OC’ or other error displayed.

Troubleshooting
SERVICE
Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc. Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service marks of Sub-Zero, Inc. All other trademarks or registered trademarks are property of their respective owners in the United States and other countries.

FOR RESIDENTIAL USE
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, this Wolf Appliance product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Wolf Appliance under the above warranty must be performed by Wolf factory certified service, unless otherwise specified by Wolf Appliance, Inc. Service will be provided during normal business hours.
For five years from the date of original installation, Wolf Appliance will repair or replace the following parts that prove to be defective in materials or workmanship: gas burners (excludes appearance), electric heating elements, blower motors (ventilation hoods), electronic control boards, magnetron tubes and induction generators. If the owner uses Wolf factory certified service, the service provider will repair or replace these parts with the owner paying for all other costs, including labor. If the owner uses non-certi- fied service, the owner must contact Wolf Appliance, Inc. (using the information below) to receive repaired or replacement parts. Wolf Appliance will not reimburse the owner for parts purchased from non-certified service or other sources.
The warranty applies only to products installed for normal residential use. The warranty applies only to products installed in any one of the fifty states of the United States, the District of Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT WOLF APPLIANCE, INC. WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. WOLF APPLIANCE, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDEN- TAL DAMAGES ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights that vary from state to state.
To receive parts and/or service and the name of Wolf factory certified service nearest you, contact Wolf Appliance, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website, wolfappliance.com, email us at customerservice@subzero.com or call 800-222-7820.
*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited 60-day parts and labor warranty for cosmetic defects.
*Replacement filters for ventilation hood recirculating kits are not covered by the product warranty.
Pages mentionnées dans ce manuel — fabricant, assistance et téléchargements.
Les utilisateurs et notre équipe répondent généralement sous 24 h — et votre question servira aussi aux suivants.
Soyez le premier à poser une question — d'autres utilisateurs ou notre équipe y répondront.