Manuel d'utilisation / d'entretien du produit IC187C du fabricant Black Box
Aller à la page of 36
CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mail order: Black Box Corporation , 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.
1 FCC AND IC ST A TEMENTS FEDERAL COMMUNICA TIONS COMMISSION AND INDUSTR Y CANADA RADIO FREQUENCY INTERFERENCE ST A TEMENTS This equipment generates, uses, and can radiate radio frequency energy and i.
2 2-POR T RS-232/422/485 PCI HOST ADAPTER EUROPEAN UNION DECLARA TION OF CONFORMITY Products bearing the CE Label fulfill the requirements of the EMC directive (89/336/EEC) and of the low-voltage directive (73/23/EEC) issued by the European Commission.
3 NOM ST A TEMENT NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY ST A TEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
4 2-POR T RS-232/422/485 PCI HOST ADAPTER 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.
5 T ABLE OF CONTENTS CONTENTS 1. Specifications............................................................................................7 2. Introduction .............................................................................................8 2.
6 2-POR T RS-232/422/485 PCI HOST ADAPTER CONTENTS (continued) Appendix C: Electrical Interfaces ...............................................................28 C.1 RS-232 .............................................................................
7 CHAPTER 1: Specificatiobns 1. Specifications Communication Chip — IC133C-R2: 16550 UART (optionally, you can remove this UART and install a 16950 UART for better performance); IC187C: 16950 UART Data Rate — IC133C-R2: Up to 460.8 kbps; IC187C: 460.
8 2-POR T RS-232/422/485 PCI HOST ADAPTER 2. Introduction 2.1 Overview The 2-Port RS-232/422/485 PCI Host Adapter is a two-channel PCI-bus serial I/O adapter for PCs and compatibles that supports data rates up to 460.
9 CHAPTER2: Introduction 2.3 Factory Default Settings The Adapter’s factory-default settings are as follows: T able 2-1. Factor y-Default Settings Port # Electrical Specification Port 1 RS-232 Port 2 RS-232 For your reference, record installed Adapter settings below.
10 2-POR T RS-232/422/485 PCI HOST ADAPTER 3. Card Setup NOTE In all cases J1x refers to settings for the first port and J2x refer to settings for the second port.
11 CHAPTER 3: Card Setup Examples on the following pages describe all of the valid settings for J1B and J2B. Interface Mode Examples J1D – J4D Figure 3-1. Headers J1B and J2B set for RS-422. Figure 3-2. Headers J1B and J2B set for RS-485 “Auto” with “No Echo.
12 2-POR T RS-232/422/485 PCI HOST ADAPTER Figure 3-4. Headers J1B and J2B set for RS-485 “RTS” with “No Echo.” Figure 3-5. Headers J1B and J2B set for RS-485 “RTS” with “Echo.” 3.2 Address and IRQ selection The Adapter is automatically assigned I/O addresses and IRQs by your motherboard BIOS.
13 CHAPTER 3: Card Setup T able 3-1. Jumper Operation Name Function P Adds or removes the 1K-ohm pull-down resistor in the RS-422/RS-485 receiver circuit (Receive data only). T Adds or removes the 120-ohm termination. L Connects the TX+ to RX+ for RS-485 two-wire operation.
14 2-POR T RS-232/422/485 PCI HOST ADAPTER 3.4 Electrical Interface Selection Each port on the Adapter has the ability to be used in either RS-232 or RS-422/485 mode. This is selectable via four 24 pin DIP-shunts at E1-E4. Please use the following illustration to aid in the configuration of your electrical interface.
15 CHAPTER 3: Card Setup 3.5 Clock Modes The Adapter employs a clocking option that allows you to select from “divide by 4,” “divide by 2,” and “divide by 1” clocking modes.
16 2-POR T RS-232/422/485 PCI HOST ADAPTER To enable the Adapter to reach its maximum possible data rate, 460.8 Kbps, place the jumper in the “divide by 1” position (marked DIV1).
17 CHAPTER 3: Card Setup If your communications package allows the use of baud-rate divisors, choose the appropriate divisor from the following table: T able 3-3. Divisors for the “Div 1” Mode For this Data Rate Choose this Divisor 1200 bps 384 2400 bps 192 4800 bps 96 9600 bps 48 19.
18 2-POR T RS-232/422/485 PCI HOST ADAPTER 3.7 Baud Rates and Divisors for the “Div2” mode The following table shows some common data rates and the rates you should choose to match them if you’re using the adapter in the “Div2” mode. T able 3-4.
19 CHAPTER 3: Card Setup T able 3-5. Divisors for the “Div 2” Mode For this Data Rate Choose this Divisor 1200 bps 192 2400 bps 96 4800 bps 48 9600 bps 24 19.
20 2-POR T RS-232/422/485 PCI HOST ADAPTER 4. Installation IMPOR T ANT You MUST set up the operating system BEFORE you physically install the Card. 4.1 Setting Up the Operating System If you are installing the PCI adapter in DOS, OS/2 ® , or QNX, please refer to the appropriate directory on one of the Serial Utilities Disks for instructions.
21 CHAPTER 4: Installation 5. Next, double-click on the third I/O range. Highlight the entire I/O range and type 02e8–02ef for COM4. Again, Windows will inform you that you have made modifications that may affect other devices. Click OK. Following these steps will change the COM: number assignments on the first two ports to COM3 and COM4.
22 2-PORT RS-232/422/485 PCI HOST ADAPTER 5. T roubleshooting 5.1 The Serial Utility Diskette The Adapter comes with a Serial Utility Diskette that has diagnostic software on it.
23 CHAPTER 5: Troubleshooting 5.2 Calling Black Box If you determine that the Adapter is malfunctioning, do not attempt to alter or repair it . It contains no user-serviceable parts. Contact Black Box Technical Support at 724-746-5500. Before you do, make a record of the history of the problem.
24 2-POR T RS-232/422/485 PCI HOST ADAPTER Appendix A: Interrupt Handling A.1 The Purpose and Early History of Interrupts A good analogy of a PC interrupt would be the phone ringing. The phone “bell” is a request for us to stop what we are currently doing and take up another task (speak to the person on the other end of the line).
25 APPENDIX A: Interrupt Handling A.2 Why Use an Interrupt Status Port (ISP)? The answer to the polling inefficiency was the Interrupt Status Port (ISP). The ISP is a read-only 8-bit register that sets a corresponding bit when an interrupt is pending.
26 2-POR T RS-232/422/485 PCI HOST ADAPTER Appendix B: Connector Pinouts B.1 RS-232 T able B-1. Pinout of Connector Set to RS-232 Abbreviation Name Pin # Mode TD Transmit Data 3 Output RTS Request To .
27 APPENDIX B: Connector Pinouts B.2 RS-422/485 T able A-2. Pinout of Connector Set to RS-422/485 Abbreviation Name Pin # Mode GND Ground 5 TX + Transmit Data Positive 4 Output TX- Transmit Data Negat.
28 2-POR T RS-232/422/485 PCI HOST ADAPTER Appendix C: Electrical Inter faces C.1 RS-232 Quite possibly the most widely used communication standard is RS-232. This implementation has been defined and revised several times and is often referred to as EIA/TIA-232.
29 APPENDIX C: Asynchronous Communications C.3 RS-485 RS-485 is backward-compatible with RS-422; however, it is optimized for partyline or multidrop applications. The output of the RS-422/485 driver is capable of being Active (enabled) or Tristate (disabled).
30 2-POR T RS-232/422/485 PCI HOST ADAPTER Appendix D: Asynchronous Communication In serial data communication, individual bits of a character are transmitted consecutively to a receiver that assembles the bits back into a character.
31 APPENDIX D: Asynchronous Communication Because each bit in asynchronous communications is sent consecutively, it is easy to generalize asynchronous communications by stating that each character is wrapped (framed) by pre-defined bits to mark the beginning and end of the serial transmission of the character.
32 2-PORT RS-232/422/485 PCI HOST ADAPTER Appendix E: Board Layout Figure E-1. Board layout. GD75232 U1 GD75232 U2 75175 U4 E5 C1 C3 R4 R5 R8 R9 R3 R5 R7 C4 U5 U6 C6 J1 C7 R27 R28 C8 C9 U7 C10 R29 R30.
NOTES.
NOTES.
1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746 © Copyright 2000. Black Box Corporation. All rights reserved..
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Black Box IC187C c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Black Box IC187C - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Black Box IC187C, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Black Box IC187C va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Black Box IC187C, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Black Box IC187C.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Black Box IC187C. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Black Box IC187C ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
