FR
Beper logo
Notice d'utilisation officielle

Beper BF640

44 pages·3.1 MB·Four·PDF·ENJA
Beper BF640
Table des matières 1 sections EN AfficherMasquer
Page 1 of the Beper BF640 user manual — EN
Page 1 · cliquer pour agrandir
Page 1

EN

GENERAL SAFETY ADVICE READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE FIRST USE OF THE APPLIANCE. Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable. The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the dome stic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality. Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label. If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption. Never pull the supply cord to unplug the appliance. Make sure that the supply cord never comes into contact with hot or cutting surfaces Do not use this appliance if the supply cord is damaged. In case of damage, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Only connect this appliance on alternating current Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded. This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use. To avoid any heating risk, it is recommended to unroll completely the supply cord and to unplug the appliance, when not used.

Page 2 of the Beper BF640 user manual — EN
Page 2 · cliquer pour agrandir
Page 2

Before cleaning, always unplug the appliance. To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids. Do not hold the appliance with wet hands or feet. Do not hold the appliance with naked feet. Do not expose the appliance to atmospheric agents such as rain, wind, snow, hail. Do not use the appliance near explosives, highly flammable mate rials, gases, burning flames, heaters. Do not allow children, disabled people or every people without expe rience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children. Make sure that children do not play with this appliance. If you decide not to use the appliance any longer, make it unservice able by simply cutting the supply cable after disconnecting the plug from the socket. ALSO MAKE ANY DANGEROUS PARTS UNSERVICE ABLE, ESPECIALLY FOR CHILDREN WHO COULD PLAY WITH THE APPLIANCE.

DESCRIPTION OF THE APPLIANCE Fig.1 1. Lid 2. Timer 3. Safety device 4. Lid handle 5. Timer/Thermostat indicators 6. Thermostat 7. Base Stand handles 8. Base stand 9. Low rack 10.Tempered glass container

ACCESSORIES Low cooking rack High cooking rack Extension ring 4 skewers Tongs

FIRST USE Before using the oven for the first time, wash thoroughly the glass container, racks, and tongs in hot soapy water. Put 5 cm of water in the glass container, place the lid on it and plug the oven into a socket. Operate the oven at

Page 3 of the Beper BF640 user manual — EN
Page 3 · cliquer pour agrandir
Page 3

EN

OPERATING Fig.2

CAUTION: Ensure the lid is properly placed on the container before each use in order to avoid heat dispersion, which can lengthen cooking time. 1. Place the low or high cooking rack into the glass container and put the food to be cooked inside (leave at least 7,5 cm of distance between food and lid). 2. Place the lid on top of the glass container and plug the oven into a socket. 3. Gently pull the safety device toward your right and push down the handle. 4. Set the desired cooking time by using the timer. The timer indicator will glow in red and the oven will start to operate. 5. Set the desired cooking temperature by using the thermostat. The thermostat indicator will turn on and will glow in red colour till the set temperature is reached. 6. Once the set cooking time has passed, the oven will automatically turn off. NOTE: It is possible to stop cooking process at any time by lifting up the handle. Push down the handle again to continue cooking process. CAUTION: Always lift up the handle and unplug the appliance from the mains, before removing the lid form the glass container. It is possible to increase the height of the glass container by using the extension ring. Place it on the top of the glass bowl as indicated on figure 2

CLEANING Clean the oven after each use.

Glass container: 1. Put approximately 5 cm of water into the glass bowl with some drops of washing-up liquid. 2. Place used cooking racks inside the glass bowl. 3. Place the lid on the top of the glass bowl and plug the oven into a socket. 4. Set the thermostat to 200°C and select an operating time of 15 minutes by using the timer knob. 5. When the set operating time has passed, unplug the appliance and let the oven cool down. 6. Remove the lid and rinse the glass bowl under running water. Remove possible deposits by using a slightly abrasive cloth.

Lid: 1. The glass of the lid may be cleaned with a soft damp cloth and some mild detergent. Rinse it out only by using a soft damp cloth, and then dry it thoroughly. 2. It is possible to remove the metallic filter by releasing the three screws situated under the lid.Always unplug the appliance from the mains and wait for the appliance to cool down completely, before removing the metallic filter from the lid. CAUTION: do not let water enter the ventilation openings or interior of the lid. The outer surface of the glass lid should only be wiped with a soft damp cloth. Accessories may be cleaned with mild washing detergent and water. After cleaning, dry all parts thoroughly before using them again. Do not use harsh cleaning solutions. WARNING: In case inner parts of the appliance comes into contact with water or other liquids, do not switch it on and do not attempt to open it or to perform repairs yourself. Please refer to your nearest authorized seller, or contact the Technical Assistance Service number to ask for an Authorized Assistance Centre.

BEFORE CALLING THE CUSTOMER SERVICE 1. In case the oven doesn’t work a) Make sure the plug is correctly inserted into the socket. b) Check you have push down the handle. c) Check the power cord isn’t damaged or burned. d) Make sure you have set thermostat and timer. 2. In case the oven doesn’t warm up: a) Make sure you have set the thermostat to the desired temperature

Page 4 of the Beper BF640 user manual — EN
Page 4 · cliquer pour agrandir
Page 4
TECHNICAL FEATURES Power1400W Power supply: 220-240V ~ 50/60Hz

For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee ap plies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.

The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance

For any technical assistance, please contact directly the seller or our head office in order to preserve the applian ce’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.

GUARANTEE CONDITIONS If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:

- The appliance has been used properly and for the purpose for which it has been intended. - The appliance has not been tampered with, otherwise it is not maintainable. - The purchase receipt shall be presented. - The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.

For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.

In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product

CONTACT YOUR DISTRIBUTOR IN YOUR COUNTRY OR ATER SALES DEPARTMENT BEPER. E-MAIL as sistenza@beper.com WHICH WILL FORWARD YOUR ENQUIRIES TO YOUR DISTRIBUTOR.

Sources

Références et liens

Pages mentionnées dans ce manuel — fabricant, assistance et téléchargements.

Poser une question sur : Beper BF640

Les utilisateurs et notre équipe répondent généralement sous 24 h — et votre question servira aussi aux suivants.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Aucune question pour l'instant sur le Beper BF640

Soyez le premier à poser une question — d'autres utilisateurs ou notre équipe y répondront.

Document d'origine

Beper BF640 manuel PDF

44 pages·3.1 MB·Four·PDF
Cliquez sur une page ci-dessus pour l'ouvrir ici
Page 1 / …
100%
Chargement des pages…