FR
Beper logo
Notice d'utilisation officielle

Beper 90002

36 pages·1.6 MB·Réfrigérateur·PDF·ENNLJA
Beper 90002
Table des matières 1 sections EN AfficherMasquer
Page 1 of the Beper 90002 user manual — EN
Page 1 · cliquer pour agrandir
Page 1

EN

GENERAL SAFETY ADVICE READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE FIRST USE OF THE APPLIANCE. Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable. The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the dome stic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality. Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label. If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption. Never pull the supply cord to unplug the appliance. Make sure that the supply cord never comes into contact with hot or cutting surfaces Do not use this appliance if the supply cord is damaged. In case of damage, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Only connect this appliance on alternating current Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded. This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use. To avoid any heating risk, it is recommended to unroll completely the supply cord and to unplug the appliance, when not used.

Page 2 of the Beper 90002 user manual — EN
Page 2 · cliquer pour agrandir
Page 2

Before cleaning, always unplug the appliance. To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids. Do not hold the appliance with wet hands or feet. Do not hold the appliance with naked feet. Do not expose the appliance to atmospheric agents such as rain, wind, snow, hail. Do not use the appliance near explosives, highly flammable mate rials, gases, burning flames, heaters. Do not allow children, disabled people or every people without expe rience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children. Make sure that children do not play with this appliance. If you decide not to use the appliance any longer, make it unservice able by simply cutting the supply cable after disconnecting the plug from the socket. ALSO MAKE ANY DANGEROUS PARTS UNSERVICE ABLE, ESPECIALLY FOR CHILDREN WHO COULD PLAY WITH THE APPLIANCE.

SAFETY ADVICE - WARNINGS 1. Do not place heavy objects on cables or heat sources near them. Cables may be damaged. 2. This product is for domestic use only. 3. Do not use spray solutions (such as: insecticides, hair spray, etc.), which could damage the appliance. 4. If abnormal situations occur, switch off the appliance immediately and contact your dealer or service. 5. Do not use this unit connected to programmers, external timers, remote control systems, timers, or any other device that can turn it on automatically. 6. Do not use damaged cables. 7. When removing the plug, hold it firmly to avoid electric shock, short circuit, or fire. 8. Do not attach safety switches with adhesive tape. 9. It is strictly forbidden to disassemble or repair the appliance, if ne cessary, contact your dealer or service center. 10. Do not use the appliance near a bathtub, shower or pool.

Page 3 of the Beper 90002 user manual — EN
Page 3 · cliquer pour agrandir
Page 3

EN

12. Do not use the appliance near inflammable objects. 13. Do not place objects in the slots of the appliance.

DESCRIPTION OF THE ITEM Fig. 1 1. Temperature Adjustor 2.Light 3 Fan mask 4. Shelf 5. Grid grooves 6. Foot 7. Condensate collection tray 8. Ream cover 9. Opening handle 10. Compartment 11. Bottles compartment 12. Sealing gasket 13. Door 14. Power cord

FRIDGE SETTING Remove all packing material and accessories. Examine the fridge to see that there are no damages. Do not install the fridge if damaged. Place on a flat surface that provides enough space for ventilation. Leave a minimum free space of 5 cm for the sides of the fridge and 10 cm for the back side. The fridge is not designed for recessed use, because it needs to keep proper ventilation on its parts. The fridge should not be used close to sources that produce heat or cold. Do not climb over the fridge, avoid the bumps. Do not use the fridge as a holder for objects or containers. Do not open the fridge door frequently, especially when it is very hot; in any case close the door after a short time after opening. Do not use the fridge, exposing it to dangerous atmospheres due to its integrity, such as rain, wind, excess moisture, chemicals, gas, sunlight, etc. Do not introduce food or drinks that are too hot inside the refrigerator. If the food or drinks extracted from the fridge have odor or strange color, it is advisable not to consume them, they are probably out of date. We recommend installing the fridge in a place where the temperature is between 10-26 ° C. If the room tempera ture is higher or lower than the recommended one, the performance of the appliance may be affected.

Climate class SN: room temperature + 10 ° C to + 32 ° C Climate class N: room temperature from + 16 ° C to + 32 ° C

REVERSE THE DOOR The fridge was assembled with the front door open from left to right. Fig.2 The door brackets are located on the right side of the fridge. Fig.3 If you want to change the way the door is opened, follow the steps below. Empty the inside of the fridge completely from any food or drink. Disconnect the power cord from the electrical outlet. Two screwdrivers are needed, one with a cross head and one with a thin flat head. Remove the upper and lower covers of the brackets using the flat head screwdriver, inserting it into the grooves to lift them. Using the cross-head screwdriver unscrew all the screws that hold the brackets securely and remove them. Be careful not to drop the front door when it is disconnected.

1. Do not overturn the fridge to remove the lower bracket. 2 - Replace the brackets on the other side of the fridge, securely fastening the screws and reinserting the covers on the brackets. Fig.4
Page 4 of the Beper 90002 user manual — EN
Page 4 · cliquer pour agrandir
Page 4

FUNCTION Plug the power cord into the electrical outlet. Set the temperature by turning the adjusting knob placed inside the fridge. The temperature cab be set in the range of 5 ° C to 15 ° C. To reduce the internal temperature, rotate the knob from “Min” to “Max”. At first use, set the knob to “Max” to reduce the temperature more quickly, then adjust it to your liking. The temperature reaches the set value at varying times depending on the room temperature and the amount of food introduced into the refrigerator and the temperature of the refrigerator. The best performance is obtained if the door is opened and closed as little as possible. For optimal results, it is recommended to put in the refrigerator food and drinks already cold.

MAINTENANCE AND CLEANING Disconnect the power cord from the electrical outlet before each cleaning operation. Be careful not to infiltrate liquids in the fridge, to avoid damaging it. Never clean with diluents, abrasive products in general, detergents for plastic, glass or the like because could damage the fridge. The inside of the fridge can be cleaned with a solution of hot water and bicarbonate (2 tablespoons of bicarbo nate in a quarter of a liter of water). Dry all parts well. Be careful not to wet the temperature control knob and the fan guard grid. The outside of the fridge, shelf grids and gasket can be cleaned with a damp cloth and soap. Periodically dry the condensed liquid in the condensate collection tray. When not using the fridge for a long time, remove any food and drink inside the compartment, clean it and leave the front door open for a few days. It is important to ensure good ventilation around the fridge in order to avoid mold formation. To change the position of the fridge, empty it completely and then move it, without tilting it over or overturning it.

TECHNICAL DATA Power70W Power supply: 220-240V ~ 50/60Hz

For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

Page 5 of the Beper 90002 user manual — EN
Page 5 · cliquer pour agrandir
Page 5

EN

GUARANTEE CERTIFICATE This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee ap plies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.

The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance

For any technical assistance, please contact directly the seller or our head office in order to preserve the applian ce’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.

GUARANTEE CONDITIONS If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:

- The appliance has been used properly and for the purpose for which it has been intended. - The appliance has not been tampered with, otherwise it is not maintainable. - The purchase receipt shall be presented. - The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.

For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.

In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product

TECHNICAL ASSISTANCE Even after the guarantee period we will always pay attention to repairs for defected appliances. For technical assistance and/or repairs after the guarantee period you can directly contact the below address:

CONTACT YOUR DISTRIBUTOR IN YOUR COUNTRY OR ATER SALES DEPARTMENT BEPER. E-MAIL as sistenza@beper.com WHICH WILL FORWARD YOUR ENQUIRIES TO YOUR DISTRIBUTOR.

Sources

Références et liens

Pages mentionnées dans ce manuel — fabricant, assistance et téléchargements.

Poser une question sur : Beper 90002

Les utilisateurs et notre équipe répondent généralement sous 24 h — et votre question servira aussi aux suivants.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Aucune question pour l'instant sur le Beper 90002

Soyez le premier à poser une question — d'autres utilisateurs ou notre équipe y répondront.

Document d'origine

Beper 90002 manuel PDF

36 pages·1.6 MB·Réfrigérateur·PDF
Cliquez sur une page ci-dessus pour l'ouvrir ici
Page 1 / …
100%
Chargement des pages…