Manuel d'utilisation / d'entretien du produit RS2 du fabricant Yale
Aller à la page of 18
13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB.
i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES.
ii SAFETY PRECAUTIONS Each Y ale RS2 Manually Lever Operated Hoist is built in accordance with the specifications contained herein and at the time of manufacture complies with our interpretation of applicable sections of *ASME B30.21, *ANSI/ASME HST - 3M and the Occupational Safety and Health Act-1970.
iii 1 CHOOSE THE RIGHT HOIST FOR THE JOB... Choose a Y ale Lever Hoist with a capacity f or the job. Know the capacities of your hoists and the weight of your loads.
SPECIFICA TIONS The Y ale RS2 Lever Hoist is a highly versatile manually lever operated chain hoist that can be used to efficiently pull, lift, drag or stretch. S tandard features of the hoist include: • Alloy steel liftwheel to reduce chain wear . • Hoistaloy ® load chain for long and dependable service.
2 Regardless of how the hoist is used, make sure that the upper hook is firmly attached to a support or anchor that has sufficient strength to hold several times the rated load of the hoist.
3 4. Pull on hook side and loose end side of load chain to make sure chain feeds freely into and out of the hoist. 5. Grasp unit by frame or upper hook and pull on end ring or lower hook to pull the chain through hoist to the length required to attach lower hook to load.
4 load the unit, then check to be sure that the attachments to the hooks and load are firmly seated. Continue movement only after you are assured the load is free of all obstructions. The hoist has been designed for hand powered operation only . Do not use an extension on the lever .
5 Inspection of hoists is divided into two general classifications designated as “frequent” and “periodic”. Frequent Inspections These inspections are by the operator or other designated personnel. Frequent inspections are to be performed daily or prior to each use and they are to include the following: A.
6 Also check chain for stretch using a vernier caliper as shown above. Select an unused, unstretched section of chain (usually at the loose end) and measure and record the length over 1 1 chain links (pitches). Measure and record the same length on a worn section of chain.
When lubricating parts adjacent to the brake, DO NOT use an excessive amount of lubricant which could seep onto the brake surfaces. EXTERIOR FINISH The exterior surface of the RS2 Lever Hoist has a durable, scratch resistant baked powder coating. Normally , the exterior surfaces can be cleaned by wiping with a cloth.
8 J. Assemble pawls (673-19) to pawl shaft s (673-22) and secure with snap rings (673-32). Place pawl springs (673-21) on pawl shaft s and insert these assemblies into frame (673-2). K. Slide friction hub (673-12) onto pinion (673-9) and place one friction disc (673-13) on top of friction hub.
screw . If screw has been removed and replaced, always use new spots for locking. On the 3 ton unit, hang it in the vertical position. Making sure there are no twists in the chain, feed the end of chain thru the hook block (673-71) and around lower sheave (637-70).
KEY NO. P ART NAME P ART NUMBER NO. REQ’D. 3/4 TON 1 1/2 TON 3 TON 673-1 1 Liftwheel Bearing 88645 88442 673-2 1 Frame (includes 673-3 and (4) 673-4) 73304Y 73331Y 673-3 1 Pinion Bearing, frame end .
i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES.
i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES.
13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB.
13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Yale RS2 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Yale RS2 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Yale RS2, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Yale RS2 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Yale RS2, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Yale RS2.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Yale RS2. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Yale RS2 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
