Manuel d'utilisation / d'entretien du produit 883681-08 Rev. E du fabricant Wyse Technology
Aller à la page of 62
Users Guide Wyse ® Winterm™ 1 series, Based on W yse Thin OS Issue: 121906 PN: 883681-08 Rev . E.
Copyright Notices © 2006, Wyse T echnology Inc. All rights reserved. This manual and the software and firmware described in it are copyrighted. Y ou may not reproduce, transmit, transcribe, store in .
Thin Client Requir ement s Compliance FCC Compliance Model SX0, Product S10 thin clients meet Class B requirements. IEC/EN Compliance Model SX0, Product S10 thin clients meet Class B requirements.
This page intentionally blank..
Content s 1 Introduction 1 About this Guide 1 Organization of this Guide 1 Wyse T echnical Support 1 Related Online Resources Available at Wyse 2 2 Getting St arted 3 What Happens When Y ou T u rn on .
vi Contents 4 Using and Configuring Access Connections 43 Using Ethernet Direct Access 43 Using Wireless Direct Access 43 Configuring PPPoE Access 44 Configuring Dialup Modem Access 45 Configuring PPT.
1 Introduction Wyse ® Winterm TM 1 series Thin Clients use Wyse Thin OS. These highly optimized thin clients provide ultra- fast access t o applic ations, files, and network resources ma de available on ma chines host ing Citrix™ ICA an d Microsoft™ RDP session services.
2 Chapter 1 Related Online Resour ces A vailable at Wyse Wyse ® Winterm TM 1 series Thin Client features c an found in the Datasheet for your specific thin client model. Datasheets are available on the Wyse W eb site at: http://www .wyse.com/s erviceandsup port/supp ort/docume ntindex.
2 Getting S t arted This chapter provides informatio n to help you quickly get started using your thin client. It describes basic thin clien t functions and prov ides instru ctions on using the Desktop an d Connect Manger to ma nage the connections an d applications available for you to use.
4 Chapter 2 dialog box by selecting it from the desktop me nu. This dialog box also can be set to open automatically on system s tart-up. Fo r information on the PPPoE Manager dialog box, refer to "Configuring PPPoE Access.
Getting Started 5 Signing-on After a connection to the ente rp rise intranet is est ablished, sign-on to the network and/or session services may or may not b e required (depending on a Globa l profile option set by the network administrator , the sessio n serv ers, or any requirem ents of PNAgent/PNLite services).
6 Chapter 2 Note If you are using both PNAgent/PNLite and a User pr ofile, the user name must be defined in the Windows domain to be used and the passwor d must be the same for both the domain an d the User profile.
Getting Started 7 Knowing Y our Assigned Pr ivileges and User Mode As a thin client operato r , you have a thin c lient account with certain privileges.
8 Chapter 2 User Modes User Modes define you r login state and include the following ty pes of us er: • Guest user - The Guest user mode logs on using the Glo bal profile only (no User profile is available) and does not need a password. But the Guest user will be disabled if no connection is defined in the Global profile.
Getting Started 9 file). This pr events Low-pr ivileged and Non-privileged users from accessing the Network Setup dialog box b y resetting the thin client or through system rest art to S tand-alone user mode.
10 Chapter 2 Note Depending on how the servers and applications ar e configured, signing of f from or shutting down the thin client may not necessarily close/open server sessions. Ge nerally , you should c lose sessio ns before si gning-off from or shutting down the thin client.
Getting Started 11 Use the following guidelines: • Icons representing availabl e server connections and published applications are displayed on the ba ckground.
12 Chapter 2 Underst anding the Wi ndow Display Modes The thin client s allow three dif ferent display modes, including: • St andard window - Window fr ame, title bar , conten t area, including icons, and so on. This mode is available for use with any connection.
Getting Started 13 Neighborhood se tup on the server . These icons display on the desktop an d in various places (for example , Systray and the user Desktop submenu application selections) depe nding on the Citrix server config uration.
14 Chapter 2 The System Setup submenu provide s access to the following local system setup dialog boxes: • Preference - Allows user selection of thin c lient parameters that are a matter of personal prefere nce. For more information on the System Preference dia log box, refer to "Setting System Preferences.
Getting Started 15 Accessing the PPPoE Manager Selecting PPPoE Manager in the Desktop menu opens the PPPoE Manager dialog box. Use this dialog box to configure or start PPP connection over Ethernet to a DSL modem.
16 Chapter 2 Using the Connect Manager Clicking the Connect Manager button on the task bar opens the Connect Manager . The Connect Manager has a list of con nection entries and a set of comman d buttons available for use with the connections. Note Non-privilege users canno t view the Connect Ma nager .
Getting Started 17 ( enablelocal=yes ), locally-defi ned connection definitions can be saved in th ese cases. • St and-alone user - Locally-d efined connections ar e ret ained when the thin client restart s or is shut down (there is no individual log-on).
18 Chapter 2 Configuring ICA Connections If you open the Connection Settings dialog box for an ICA connectio n (select the ICA connection in the Conne ct Manger and click Settings ), you can view and configure the connection (to add new ICA connectio ns, use New in the Co nnect Manager).
Getting Started 19 Use the following guidelines: • Server or Published Ap plication - Select the type of connection to which the settings apply . • Connection Descr iption - Enter the descr iptive name that is to appear in the connection list (38 ch aracters ma ximum).
20 Chapter 2 Figure 7 Connection Settings (ICA) - Options t ab Use the following guidelines: • Application (127 characters maximum) and Working Directory (63 charac ters maximum) - Enter an initiali.
Getting Started 21 • Re-connect af ter disconnect - When selected, causes the th in client to automatically reconnect to a session afte r a non-operator-in itiated disconnect. If s elected, the wait interval is that set in the Delay before re-connecting box or the user prof ile for yes (20 seconds) or seconds .
22 Chapter 2 button next to the list box to make the sele ction you want). For example, a list of WTS servers on the local network from which you can select.
Getting Started 23 • Colors - Select the color depth of the RDP session. If High Colors (16 bits) or Tr u e Colors is selected and the RDP server does not s upport this color depth, the thin client renegotiates the color de pth to the lower value (for example, 25 6 Colors (8bit s)).
24 Chapter 2 This page intentionally blank..
3 Setting Up the Thin Client This chapte r contains inform ation to hel p you set up your thin client using the System Setup submenu. Since the setup information for individual us ers (user profile) is stored in a remote database, ve ry little setup is required of a thin client operator .
26 Chapter 3 Setting System Preferences The System Preference dialog box allows you to select personal pr eferences such as time zone, screen saver , mouse speed and lef t/right buttons, keyboard language, and so on.
Setting Up the Thin Client 27 Figure 1 1 Syst em Preference - Ad vanced tab • Character Se t - Select the character set (Each characte r is represented by a number . The ASCII character set, for example, u ses the numbers 0 through 127 to represent all English characters as well as special cont rol characters.
28 Chapter 3 • Delay before repeat - Repeat parameters for held-down key . Delay before repeat selectable from 1/5 second to 2 seconds , or no repea t . The default is 1/3 second . • Repeat Rate - Select Slow , Me dium , or Fast . The default is Medium .
Setting Up the Thin Client 29 • No local Ethernet, Modem dialup only - Select this option if the thin client will access a network through a dial-up mode m (for more information, refer to "Configuring Dialup Modem Access"and "Config uring Serial Communicatio ns.
30 Chapter 3 Figure 13 Network Setup - Name Servers tab Use the following guidelines: • DNS Domain and DNS Servers - Use of DNS is optional. DNS allows you to specify remote systems by their hos t nam es rather than IP addresses.
Setting Up the Thin Client 31 Figure 14 Network Setup - Se rvers t ab Use the following guidelines: • File Servers/Path , Username , and Password - IP address or host na me of the FTP server that provides th e system software and update ima ges. The address can be supplied through DHCP if DHCP is us ed.
32 Chapter 3 Figure 15 Network Setup - Reconnect optio ns Figure 16 Network Setup - Opt ions t ab Use the following guidelines: • DHCP Option IDs - E nter the supp orted DHCP o ptions (each v alue can on ly be used once and must be between 128 and 254 ).
Setting Up the Thin Client 33 Setting Up Wireless Access The Wireless Setup dialog box allows yo u to config ure the para meters required f or wireless wide-band modem access to the enterprise in tranet. A wireless wide-band network device can be us ed to access the enterprise intranet.
34 Chapter 3 encrypt/decrypt each frame transmitted from or received by the wirele ss adapter . The access point must recognize frames encr ypted by the same key . • Key #1 through Key #4 boxes - Enter the en cryption keys provided by the network administrato r .
Setting Up the Thin Client 35 • User defined displa y setting - Select this o ption and select the resolution and refresh rate supported by your monitor (all combina tions are allowed): • Resoluti.
36 Chapter 3 Use the following guidelines: • Select Port - Select the port to which this se tup definition applie s. Either Port 1 , 2 , 3 , or 4 can be selected (default is Port 1 ). For Model SX0, Product S10, COM 1 or COM 2 selects from either the USB or serial de vice.
Setting Up the Thin Client 37 Use the following guidelines: • Select Port - Select the port you want from the list. • Printer Name - This is a required entry . If Enab le LPD service for the printer is selected, the printer na me becomes the qu eue name fo r other clients using LPR to print to this printer .
38 Chapter 3 Figure 21 Printer Setup - LPDs tab Use the following guidelines: • Select LPD - Select the port you want from the list. • LPD Host s - The DNS or WINS name of the server for the ne twork printer .
Setting Up the Thin Client 39 for the printer is not found, the identifica tion must be a supported driver name on the connected ho sts for the pr inter to be automatically created on the hosts. • Printer Class - Select the printer class from the list.
40 Chapter 3 Use the following guidelines: • Default Printer - Select the printer you want to be the default printer from the list. • Enable .print Client and Port - If you want to enable .print Client, select Enable .prin t Client and then enter the port.
Setting Up the Thin Client 41 b. T ype the thin client IP address or DNS name in the Name or address of host providing LPD box. c. T ype the printer name (assigned in “Configurin g LPD Services” ) in the Name of printer on that machin e box. d. Click OK , and then click NEXT .
42 Chapter 3 This page intentionally blank..
4 Using and Configuring Access Connections This chapter provides information and det ailed instructions on using and configuring connections to access the ente rprise server en vironment available to th e thin client.
44 Chapter 4 Configuring PPPoE Access PPPoE (Point-to-Point Protocol ov er Ethernet) is a specificat ion for connecting users on an Ethernet to the Inte rnet or intranet through a common br oadband medium, such as a single DSL line, wireless device, or cabl e modem.
Using and Configuring Access Conn ections 45 Configuring Dialup Modem Access A USB dial-up modem or a USB- to-Serial adapter connected to a ser ial modem can be used with the th in client to access a dial-u p server .
46 Chapter 4 Dialup parame ters for each dialing entry are e ntered using the Dialup Prop erty dialog box. Figure 27 Dialup Property Use the following guidelines: • Dialup Description - Enter the descri ptive name that will ap pear in the Dialup Manager li st of entries.
Using and Configuring Access Conn ections 47 Note Ask your network administrator for th e dialed server passwo rd and other dialog requireme nts. • Enable protocol compres sion - When selected, allows data that is being communicated using the selected protocol ( PPP or SLIP) to be compressed (default is selected).
48 Chapter 4 Use the following guidelines: • Message area - Displays message s as dialing progresses and the conn ection is established. If this is an in teracti ve login connection, type appropr iate responses to messages if you are prompted (ask your network admi nistrator for the dialed serv er password and other dia log require ments).
Using and Configuring Access Conn ections 49 • New - Opens the PPTP Property dialo g box. Use this dialog box to create a new connection entry in the list of connections. • Edit - Opens the PPTP Property dialog box for a currently-selecte d list entry .
50 Chapter 4 After connection initiation, the PP TP St atus dialog box opens displaying messages and allowing you to refresh or disconnect the connection. Figure 31 PPTP Status Use the following guidelines: • Message area - Displays messages as the connec tion is established.
5 Using the Network T est T ools This chapte r contains inform ation on us ing th e Network test tools available on the thin client. Ping (Packet Inter Net Groper) and Trace Route can be used for chec.
52 Chapter 5 Use the following guidelines: • Enter Hostname or IP - Enter the IP address, DNS-re gistered host name, or WINS-registered host nam e of the target to be pinged .
Figures 1 Desktop example 10 2 Desktop m enu 13 3 System Setup Subm enu 13 4 Connect Manager (High-privileged user example) 16 5 Connection Settings ( ICA) - Server option 18 6 Connection Settings (IC.
54.
Ta b l e s 1 Supported Keyb oard Languages 27.
Users Guide Wys e ® Winterm TM 1 series, Based on Wyse Thin OS Issue: 1219 06 Written and publishe d by: Wyse T echnology Inc., December 2006 Created using FrameMake r ® and Acrobat ®.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Wyse Technology 883681-08 Rev. E c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Wyse Technology 883681-08 Rev. E - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Wyse Technology 883681-08 Rev. E, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Wyse Technology 883681-08 Rev. E va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Wyse Technology 883681-08 Rev. E, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Wyse Technology 883681-08 Rev. E.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Wyse Technology 883681-08 Rev. E. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Wyse Technology 883681-08 Rev. E ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
