Manuel d'utilisation / d'entretien du produit P5200 du fabricant Tyco Electronics
Aller à la page of 122
Operator’s Manual MM23772 Rev. F, Jul/08 M/A-COM P7200 and P5200 Series Portable Radios.
MM23772, Rev. F 2 MANUAL REVISION HISTORY REV DA TE REASON FOR REVISION - Jan/06 Initial release. A Dec/06 Updated operation info. B Apr/07 Added EDACS/Conventio nal/P25 operation. C Jan/08 Added P5200 portable radios and added VTAC info. D Feb/08 Updated OpenSky operating i nformation, added P25 Trunked.
MM23772, Rev. F 3 TABLE OF CONTENTS Page 1 SAFETY CONVENTIONS ............................................................................................................. ..... 10 2 SAFETY TRAINING INFORMATION ........................................
MM23772, Rev. F 4 TABLE OF CONTENTS Page 8.8.1 Profiles ........................................................................................................................... 30 8.8.2 Talk Groups ..................................................
MM23772, Rev. F 5 TABLE OF CONTENTS Page 8.27.1 Declare an Emergenc y Call or Alert .............................................................................. 49 8.27.2 Receive an Emergency Call ....................................................
MM23772, Rev. F 6 TABLE OF CONTENTS Page 9.20.1 Turn Scan On and Off.................................................................................................... 73 9.20.2 Add Groups to a Scan List ..............................................
MM23772, Rev. F 7 TABLE OF CONTENTS Page 10.7 SYSTEM SELECTION .............................................................................................................. 93 10.8 GROUP/CHANNEL SELECTION .............................................
MM23772, Rev. F 8 TABLE OF CONTENTS Page 11.12 CONTRAST ADJUST ............................................................................................................. 112 11.13 DECLARE AN EMERGENCY ...............................................
MM23772, Rev. F 9 TABLE OF CONTENTS Page Figure 11-3: P7270 Radio Front Panel ........................................................................................... ............. 107 Figure 11-4: Radio Display ....................................
MM23772, Rev. F 10 1 SAFETY CONVENTIONS The following conventions are used throughout this ma nual to alert the user to general safety precautions that must be observed during all phases of operation, servi ce, and repair of this product.
MM23772, Rev. F 11 2 SAFETY TRAINING INFORMATION The M/A-COM P7200 and P5200 portable radios generate RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Oc.
MM23772, Rev. F 12 • As noted in Table 2-1, ALWAYS keep the device and its anten na AT LEAST 1.1 cm (0.43 inches) from the body and at least 2.5 cm (1.00 inch) fro m the face when transm itting to ensure FCC RF exposure compliance requirements are not exceeded.
MM23772, Rev. F 13 3 OPERATING TIPS Antenna location and condition are important when opera ting a portable radio. Operating the radio in low lying areas or terrain, under power lines or bridges, inside of a vehicle or in a metal framed building can severely reduce the range of the unit.
MM23772, Rev. F 14 3.1.3 Aircraft Always turn off a portable radio before boarding any aircraft! Use it on the ground only with crew permission. DO NOT use while in-flight!! 3.1.4 Electric Blasting Caps To prevent accidental detonation of el ectric blasting caps, DO NOT use two-way radios within 1000 feet of blasting operations.
MM23772, Rev. F 15 4 BATTERIES The P7200 and P5200 series portable radios use recharg eable, recyclable Nickel Cadmium (NiCd), Nickel Metal Hydride (NiMH), or Lithium Ion (Li Ion) batteri es. Please follow the directions below to maximize the useful life of each type of battery.
MM23772, Rev. F 16 4.2 CHARGING BATTERY PACKS Battery chargers are available from M/A-COM with nominal charge times of one hour. Com binations include single and multi-position, rapid c harge units. M/A-COM chargers are specifically designed for ch arging nickel-based and lithium ion battery packs.
MM23772, Rev. F 17 4.4 CHANGE THE BA TTERY PACK 4.4.1 Remove the Battery Pack Make sure the power to the radio is turned OFF. CAUTION Although the P7200 and P5200 have been designed to tolerate changing the battery pack without turning power off, M/A-COM, Inc.
MM23772, Rev. F 18 4.5 BATTERY DISPOSAL CA UTION In no instance should a battery be incinerate d. Disposing of a battery by burning will cause an explosion. RECHARGEABLE BATTERY PACK DISPOSAL – The product you have purchased contains a rechargeable battery.
MM23772, Rev. F 19 5 INTRODUCTION The P7200 and P5200 series radios are dual-band multi- m ode portable radios. The P7200 series radio is available without a front mounted keypad (P7200 onl y), with a 6-buttoned front mounted keypad, and with a DTMF front mounted keypad (P7200 only).
MM23772, Rev. F 20 Figure 5-1: P7230 Select Model Radio Figure 5-2: P7250 and P5250 Scan M odels.
MM23772, Rev. F 21 Figure 5-3: P7270 System Model 5.1 WATER RESISTANCE (P7200 ONLY) The P7200 series portable radios operate reliably ev en under adverse conditions. These radios meet MIL- STD-810F specifications for driven rain, humidity, and salt fog.
MM23772, Rev. F 22 6 OPTIONS AND ACCESSORIES Table 6-1 lists the Options and Accessories tested for use with the P7200 and P5200 series portable radios.
MM23772, Rev. F 23 DESCRIPTION PART NUMBER Speaker Microphone, Ant. Version, Rug gediz ed, Charger Compatible KRY 101 1617/387 Metal Belt Clip KRY 101 1647/1 Belt Loop with Swivel KRY 101 1609/1 Swive.
MM23772, Rev. F 24 7 CHANGE OPERATING MODE 7.1 CHANGE FROM OTP MODE To change from OTP operating m ode to P25/EDACS/Conventio nal: 1. Use or to cycle through the menu until “App Mode” is displayed. 2. Use or to choose an available mode.
MM23772, Rev. F 25 8 OPENSKY OPERATION Once an OpenSky system has been selected from the available system s on your P7200 or P5200 series portable radio, the characteristics described in the following sections will govern operation. 8.1 POWER ON/OFF AND VOLUME CONTROL 8.
MM23772, Rev. F 26 8.2.1 Buttons and Knobs The function of the button and knob controls will vary depending on the mode of operation. The primary functions of the button and knob controls when in the OpenSk y mode of operation are listed in the following paragraphs.
MM23772, Rev. F 27 8.2.2 Keypad (P7250, P5250, and P7270) The keys on the keypad have special functions a nd are labeled using a symbol or abbreviated word describing its primary function. Numeric entry is a secondary function of the keys. Table 8-1 lists and defines each key.
MM23772, Rev. F 28 8.3 DISPLAY The P7200 and P5200 display ( Figure 8-2) is made up of 3 lines. Lines 1 and 2 contain twelve alpha-numeric character blocks each. The 3 rd line displays radio status icons. If programmed, the display backlighting will illuminate upon power up or when operating radio contr ols.
MM23772, Rev. F 29 8.5 TRI-COLOR LED Figure 8-3: Tri-Color LED The Tri-Color LED changes color to indicate radio status and is visible fro m both the front and top of the radio (see Figure 8-3). The LED can be turned On or Off via the “Status LED” menu option.
MM23772, Rev. F 30 8.7 LOG OFF THE NETWORK The *0## command de-registers the radio. Typically, this is automatically performed when powering down the radio. Using this method, the User ID is remembered by the radi o so only the password is needed at next log-in.
MM23772, Rev. F 31 8.9 OPENSKY DISPLAY OVERVIEW The 12-character x 3-line display shows the radio status . The first two lines of the display are text lines that change in response to user interaction with th e menu buttons. Status icons appear in t he bottom line (line 3) of the display (see Table 8-2).
MM23772, Rev. F 32 8.10 ALERT TONES The P7200 and P5200 rad ios provide audible Alert Tones or “be eps” to indicate the various operating conditions (see Table 8-3). Table 8-3: Alert Tones NAME TONE DESCRIPTION Call Queued 1 low tone/2 high tones Ca ll queued for processing .
MM23772, Rev. F 33 8.11 BASIC MENU STRUCTURE Table 8-4 illustrates the basic P7200 and P5200 OpenSky menu structure. Menu items will vary depending upon system programming, radio hardware, and optional configurations. All menus except the dwell display menu can be turned off by network admi nistration personnel.
MM23772, Rev. F 34 MENU NAME RADIO DISPLAYS USAGE NOTES See Previous Page Selected Channel “ ChannelMenu ” Displays the current channel. Press to return to dwell display. Scan Mode “ ScnModeMenu ” Use or to scroll t hrough available sc an modes (Normal, No Sc an, or Fixed).
MM23772, Rev. F 35 8.12 ERROR MESSAGES This section lists and describes the error messages th at may be displayed by the P7200 during OpenSky operation. MESSAGE DESCRIPTION NOAUT01 Unspecified MDIS error. If condition pers ists in strong signal conditions, contact your system administrator.
MM23772, Rev. F 36 MESSAGE DESCRIPTION BAD VID Invalid voice user ID. Check User ID. If correct, contact your system administrator. HOM DWN The Home VNIC is down. Retry . If error continues, contact your system administrator. SRV BSY The serving VNIC is busy (congested).
MM23772, Rev. F 37 8.13 KEYPAD 8.13.1 Keypad Function Commands (P7270 Only) To perform a command from the keypad, use one of the keypad commands: Table 8-5: Keypad Function Commands KEYPAD COMMAND FUNCTION *0 Log-off command: *0## (log s the user off t he system).
MM23772, Rev. F 38 8.13.2 Quick Buttons (P7270 Only) Quick Buttons are a two-button sequence that giv es the radio user quick access to certain menu items. Quick Buttons act as a toggle function. Table 8-6: Quick Buttons QUICK KEYS FUNCTION 1# Transition to ECP mode If ECP is not loaded in the radio, the radio displays “No App.
MM23772, Rev. F 39 When a key on the DTMF keypad is pressed, the DT MF tone is played through the radio’s speaker. 8.14 CHANGE THE ACTIVE PROFILE The radio can store up to sixteen (16) standard profil es, one of which is the currently active profile.
MM23772, Rev. F 40 On P7250 model radios, when stealth mode is on, pressing any radio button (other than the mic’s PTT button or the emergency button) on front panel will immediately turn stealth mode off. For example, pressing the button on the front panel will turn stealth mode off.
MM23772, Rev. F 41 b. If the received talk group does not match the select ed talk group, then the received talk group name is displayed. • When the dwell display is set to received talk group and the scan mode is None, the radio only receives voice on its selected talk group.
MM23772, Rev. F 42 P1 and P2 groups CANNOT be locked out. The default emergency and emergency-capable talk groups can be locked out if they are NOT in an emergency state.
MM23772, Rev. F 43 Table 8-7: Scan Modes SCAN MODE EXPLANATION No Scan Eliminates distractions . Full communications (li sten and talk) with the active talk group.
MM23772, Rev. F 44 8.23.3 Scan Priority The following lists the scan priority order (from highest to lowest): • Selected talk group in emergency state. • Default emergency group in emergency state. • Selected talk group. • Emergency capable group in emergency state.
MM23772, Rev. F 45 8.24.1 Manually Dialing a Selective Call (P7270 Only) 1. Enter *8, the User ID number of the user bei ng called, and the # key (no dashes or spaces).
MM23772, Rev. F 46 2. Press and hold a key associated with a given number fo r more than three seconds. For example, press and hold the to open the Speed Dial Menu and display the third num ber in the speed dial list. Press the PTT button. A ring tone is sounded.
MM23772, Rev. F 47 Table 8-9 lists and defines the messages that may be displayed by the radio during a Selective Alert. Table 8-9: Status of Selective Alert Messages STATUS MESSAGE DEFINITION Alert Sent Alert message successfully sent to target. Delivered Alert message passed to network.
MM23772, Rev. F 48 8.25.2.2 Select a Destination Using the Menu 1. Using the or key, scroll through the menu until “Ale rtDst” (Alert Destination) appears. 2. Use the or button to scroll through the list of User IDs until the desired destination is displayed and press the key.
MM23772, Rev. F 49 8.26.2 Receive an Interconnect Call Press , , or buttons to accept an incoming Interconnect Call. 8.27 EMERGENCY COMMUNICATIONS The P7200 and P5200 por table radios are capable of sending an emergency alert and making emergency calls on the network.
MM23772, Rev. F 50 alternate between the emergency talk group na me and “EMERGENCY” to indicate that the emergency has been initiated. 2. The microphone is hot (open mic) for a programmed amount of time in order to send your v oice out on the emergency talk group.
MM23772, Rev. F 51 8.28 OPENSKY ENCRYPTION (P7200 ONLY) In the OpenSky network, both data and voice use a 128-bit or 256-bit key encryption stand ard published by the Federal Information Processing Service (FIPS) , called Advanced Encry ption Standard (AES).
MM23772, Rev. F 52 8.28.2.1 Using Manual Encryption 1. Press *32 on the keypad. 2. Enter the key (1 – 16 digits for 128 bit encryption; 17 – 32 digits fo r 256 bit encryption).
MM23772, Rev. F 53 The V-TAC supports two Extended Coverage modes: Extended Coverage for individual users (XCOV) and Extended Coverage for a talk group (XCOV-TG).
MM23772, Rev. F 54 8.31.4 Use the XCOV-TG Mode When using the XCOV-TG mode, up to thirt y (30) c lient radios can connect to the V-TAC. However, unlike XCOV, radios connected to using XCOV -TG are limited to communicating only on the XCOV-TG talk group and emergency communications .
MM23772, Rev. F 55 8.31.5 Use the Scene-of-Incident Mode The Scene-of-Incident mode (SOI) is user-selectable . The SOI mode provides a local repeater function (V-TAC) with no network connection CAUTION When operating in the SOI mode, the ra dio is disconnected from the OpenSky network.
MM23772, Rev. F 56 Table 8-11: Band Definitions RF BAND RF CHANNEL NUMBER 0 = SMR Band 0: 1-830 1 = AMPS Band 1: 1-600 2 = BORDER Band 2: 1-600 3 = 700 MHz Band 1 Band 3: 1-477 4 = 700 MHz Band 2 Band.
MM23772, Rev. F 57 9 EDACS AND P25 TRUNKED OPERATION 9.1 TURN ON THE RADIO 1. Power ON the radio by rotating the POWER ON/OFF/VOLUME knob clockwise. A short al ert signal (if enabled through programming) indicates the radio is ready to use. Refer to Figure 9-1 for location of the POWER ON/OFF/VOLUME knob.
MM23772, Rev. F 58 9.2.1 Buttons and Knobs This section describes the primary function of the bu tton and knob controls. Other functi ons associated with these controls are detailed in later sections. POWER ON-OFF VOLUME KNOB Applies power to and adjusts the receiver’s volume.
MM23772, Rev. F 59 9.2.2 Keypad (P7250, P5250, and P7270) The keys on the keypad have special functions a nd are labeled using a symbol or abbreviated word describing its primary function. Numeric entry is a se condary function of the keys. Each key is described in Table 9-1 and Table 9-2.
MM23772, Rev. F 60 Figure 9-3: P7270 Radio Front Panel Table 9-2: P7270 Keypad Functions KEY FUNCTION Primary Function: Allows the use r to scroll through available systems, groups, or channels, depending o n personality programming. Secondar y Function : Changes the selection for an it em within a list.
MM23772, Rev. F 61 9.3 DISPLAY The radio display is made up of 3 lines (see Figure 9-4) containing twelve character blocks. Lines 1 and 2 primarily display system and group names. Line 1 al so displays radio status messages. The 3rd line is used primarily to display radio status icons.
MM23772, Rev. F 62 9.4 RADIO STATUS ICONS Status Icons indicate the various operating characteris tics of the radio. The icons show operating modes and conditions and appear on the third line of the display (see Table 9-3). The battery icon indicates approxim ate level only, based on battery voltage.
MM23772, Rev. F 63 9.5 TRI-COLOR LED Figure 9-5: Tri-Color LED The Tri-Color LED changes color to indicate radio status and is visible fro m both the front and top of the radio (see Figure 9-5). The three colors of the LED and the status they represent are: Green: Receiving.
MM23772, Rev. F 64 MESSAGE NAME DESCRIPTION TXEMER Transmit Emergency Indicates an emergency call has been transmitted on this radio. This message will be flashing on line two. VOL=40 Volume Level Indicates the current volume level. Th e volume level display ranges from OFF (silent) to 40 (loudest).
MM23772, Rev. F 65 9.9 SYSTEM SELECTION METHOD 1: From the control knob: If system selection is programmed to the SYSTEM/GROUP/CHANNEL SELECTION control knob, select a system by turning the knob to the desired system number position (1- 16). The displa y registers the new system name on line one.
MM23772, Rev. F 66 METHOD 2: (P7270, P7250, and P5250 model radios) From keypad: If group selection is programmed as the primary function of and select a group by pressing or to scroll through the group list. The display registers the new group name on line two.
MM23772, Rev. F 67 9.12 NUISANCE DELETE (P7270 MODEL) A channel can temporarily be deleted from the scan list if it is not the currently selected channel. 1. Turn Scan ON. 2. When the radio receives a call on the channel, press the . The channel is removed from the scan list until the radio is power cycled.
MM23772, Rev. F 68 9.17 HIGH/LOW POWER ADJUSTMENT Transmit power adjustment is possible if enabled through programm ing. Within conventional systems, transmit power is adjustable on a per channel basis. Within EDACS and P25 trunked systems, transmit power is adjustable on a per system basis.
MM23772, Rev. F 69 9.18.1 Menu Item Selection Process An example of the menu item selection process and menu item parameter change is detail ed below for the Backlight menu item. 1. Press . The menu mode is entered. 2. Press or until the display shows: 3.
MM23772, Rev. F 70 FEATURE DISPLAY PA RA MET ER SETTING COMMENT Transmit Power Select Menu Item: TX PO WER Once Selected: POWER= HIGH or LOW Selects radio output po wer mode. Radio Revision Information Menu Item: REVISION N/A Selects the information disp lay to view.
MM23772, Rev. F 71 9.19 DIGITAL VOICE OPERATION Digital voice programmed systems have three (3) diffe rent voice modes: clear (analog), digital, and private (encrypted). The voice modes are programmed on a per-group basis within each trunked system. 9.
MM23772, Rev. F 72 9.19.3.1 Display the Currently Used Cryptographic Ke y Number To Display the Currently Used Cryptographic Key Number for either the sy stem encryption key (for special call such as individual, phone, all, agency or fleet) or the group/channel ke y (for group or conventional calls), perform the following procedure: 1.
MM23772, Rev. F 73 9.19.4.2 Transmit an Encrypted Call 1. Select the desired group or channel. 2. Place the radio in Private Mode by pressing key, and then follow the selection mode rules. On a System radio, the key can be used to toggle the Private Mode ON/OFF.
MM23772, Rev. F 74 2. Toggle Scan operation OFF by again pressing (Scan model) or (S ys tem mo del ). will disappear. • If the radio scans to a group other than the selected group then receives a call on the selected group, the radio will switch to the selected group.
MM23772, Rev. F 75 2. Press . The current priority status of the group will be displayed in column 10 of line three for a time-out period. If the group is not part of the scan list the status will be blank. 3. While the status is displayed, press to add the group to the scan list.
MM23772, Rev. F 76 9.20.4 Nuisance Delete A group can also be deleted from the scan list, if it is not the currentl y selected group, by pressing the key (Scan model) or the key (System model) during scan operati on while the radio is displaying the unwanted group.
MM23772, Rev. F 77 scan for the priority system is defined by the Syst em Sample Time control, located in the ProScan Options dialog box. See Section 9.21.3 for m ore information on ProScan 9.21.3 ProScan The radio may be programmed for ProScan system scan operation for multi-site applications depending on the version of radio flash code.
MM23772, Rev. F 78 To clear the emergency, first press and hold the button. While continuing to hold t he button, press the EMERGENCY button. (This will work if the radio is programmed to clear emergencies.
MM23772, Rev. F 79 Figure 9-11: WHC Individual Call Display Pressing PTT will initiate an individual call to the disp layed logical ID. Powering the radio OFF and ON will clear this list. 9.23.2 Send an Individual Call 9.23.2.1 Pre-Stored Individual Calls The following procedures describe how to initiate and complete a Pre-Stored Individual Call.
MM23772, Rev. F 80 any index other than 0 or toggle between the two lists by pressing the key. If wrap is enabled, the calls received list wraps on itself and not into the other list. Figure 9-12: Calls Received and Personality Lists The saved call list shows all ten storage locations.
MM23772, Rev. F 81 3. A telephone ring will be heard from the speaker. When someone answers the phone, press the PTT button and speak into the microphone.
MM23772, Rev. F 82 3. Press to enter the overdial select/entry mode and fo llow the selection mode rules to call up a stored number from the phone list.
MM23772, Rev. F 83 STATUS is selected you need to enter the number of the status message you intend to tra nsmit. If no status has been programmed for the selected number key, the radio will display NO ENTRY . A valid selection will permit the status text to appear in th e display for a pre-programmed time.
MM23772, Rev. F 84 9.29 PORTABLE DATA The P7200 and P5200 series portable radios, wh en operating in the P25 Trunked or EDACS configuration, permit either voice or data calls to be transmitted or received.
MM23772, Rev. F 85 9.29.5 Scan Lockout Mode Following the transmission or receptio n of a data call, if scan is enab led, scanning will stop tem porarily (two independent pre-programmed times; after a rece ive data call and after a transmit data call).
MM23772, Rev. F 86 10 PROJECT 25 (P25) CONVENTIONAL OPERATION 10.1 TURN ON THE RADIO Power ON the radio by rotating the Power ON/OFF /Volume knob clockwise. A short alert signal (if enabled through programming) indicates th e radio is ready to use. Refer to Figure 10-1 for location of the Power ON/OFF/Volum e knob.
MM23772, Rev. F 87 10.2.1 Buttons and Knobs This section describes the primary function of the bu tton and knob controls. Other functi ons associated with these controls are detailed in later sections. POWER ON-OFF VOLUME KNOB Applies power to and adjusts the receiver’s volume.
MM23772, Rev. F 88 10.2.2 Keypad (P7250, P5250, and P7270) The keys on the keypad have special functions a nd are labeled using a symbol or abbreviated word describing its primary function. Numeric entry is a se condary function of the keys. Each key is described in Table 10-1 and Table 10-2.
MM23772, Rev. F 89 Figure 10-3: P7270 “System” Radio Front Panel Table 10-2: P7270 Keypad Functions KEY FUNCTION Primary Function: Allows the user to scroll through av ailable systems, gro ups, or channels, depending on personality programmi ng.
MM23772, Rev. F 90 10.3 DISPLAY The radio Display is made up of 3 lines (see Figure 10-4) that contain 12 character blocks. Li nes 1 and 2 are used primarily to display system and group names. Line 1 also displays radio status messages. The 3rd line is used primarily to display radio status icons.
MM23772, Rev. F 91 10.3.1 Radio Status Icons Status Icons indicate the various operating characteris tics of the radio. The icons show operating modes and conditions and appear on the third line of the display (see Table 10-3). The battery icon indicates approxim ate level only, based on battery voltage.
MM23772, Rev. F 92 10.4 TRI-COLOR LED Figure 10-5: Tri-Color LED The Tri-Color LED changes color to indicate radio status and is visible fro m both the front and top of the radio (see Figure 10-5). The three colors of the LED and the status they represent are: Green: Receiving.
MM23772, Rev. F 93 10.5.1 Error Messages If either of the Error Messages shown below is displayed, the radio is programmed incorrectly or needs servicing. DSP ERR ERR=XXXX (PowerUp only) or DIG V x ERR x Where: xxxx is the error code and DSP ERR or DIG V ERR is the message.
MM23772, Rev. F 94 If system selection is programmed to the SYSTEM/GROUP/CHANNEL knob, direct access to systems is not av ailable. Press or to scroll through different sets of 16 systems each (banks) if more than 16 sy stems are programmed into the radio.
MM23772, Rev. F 95 4. Press once to add as a normal group or channel. 5. Press twice to add as a Priority 2 group. 6. Press three times to add as a Priority 1 group. 7. Press to re-start scanning. 10.9.2 P7250 and P5250 Model 1. Press to toggle scan OFF and verify is not displayed.
MM23772, Rev. F 96 10.13 DECLAR AN EMERGENCY 1. Press and hold the red Emergency/Home button (the length of time is programmable; check with the system administrator). 2. * TXEMER * flashes in the display, plus and will be displayed. After 2-3 seconds the transmit icon turns off.
MM23772, Rev. F 97 Figure 10-6: Menu Display 3. The radio will continue to receive and tr ansmit normally while in the menu function. 4. To scroll through the menu options use the or keys. When the required menu item has been found align the cursor with the option then press to select it.
MM23772, Rev. F 98 The TX POWER menu item, when selected, toggles LOW/HIGH power. It does not use or to scroll nor is an additional press of the button required. Table 10-5: Menu Item Information FEATURE DISPL AY PARA METE R SETTING COMMENT Keypad Lock Menu Item: KEY LOCK Once Selected: LOCKED Locked Unlocked Locks the keypad.
MM23772, Rev. F 99 Table 10-6: Information Display PRS - NAME XXXXXXXX Personality Name EEPR SIZ EEPROM Size RAM SIZ RAM Size FLSH SIZ Flash Size RF BAND Frequency Band HSD RATE Data Transfer Rate PRS VER Software Version DSP_ _RAM DSP Software Version FLSH - VER FLASH Software r - released, 01A - revision state M/A-COM (C) – 2004 Copyright 10.
MM23772, Rev. F 100 10.17.3 Private Mode (P7200 Only) The Private Mode allows the radio to transmit en crypted messages and receive clear or private transmissions. The radio transm its private if the gr oup/channel is programmed for private operation and forced operation is pre-programmed.
MM23772, Rev. F 101 If the cryptographic key(s) are zeroed, one or more ke ys must be transferred from the Keyloader into the radio before private communications may continue. 10.17.4 Private Operation (P7200 Only) 10.17.4.1 Receive an Encrypted Call When receiving, the radio automatically switches betw een clear or private operation.
MM23772, Rev. F 102 Conventional Digital or encrypted channels require Channel Guard on the channel to operate correctly. The voice coding technolog y embodied in this product is protected by intellectual property rights including pate nt rights, copyrights, and trade secrets of Digital Voice Systems, Inc.
MM23772, Rev. F 103 3. When the radio receives a P25 call, the radio w ill unmute and the ID of the transmitting radio will appear in the display. 4. Press the PTT button to respond. 5. Unanswered calls will appear in the Who Has Called (WHC) list. 10.
MM23772, Rev. F 104 11 CONVENTIONAL OPERATION The radio functions in the conventional mode when using conventional comm unications channels (non- trunked). 11.1 CONTROLS The radio features two rotary control knobs and an emergency button mounted on the top of the radio ( Figure 11-1).
MM23772, Rev. F 105 11.1.1 Buttons and Knobs This section describes the primary function of the bu tton and knob controls. Other functi ons associated with these controls are detailed in later sections. POWER ON/OFF VOLUME KNOB Applies power to and adjusts the receiver’s volume.
MM23772, Rev. F 106 11.1.2 Keypad (P7250, P5250, and P7270) The keys on the keypad have special functions a nd are labeled using a symbol or abbreviated word describing its primary function. Numeric entry is a se condary function of the keys. Each key is described in Table 11-1 and Table 11-2.
MM23772, Rev. F 107 Figure 11-3: P7270 Radio Front Panel Table 11-2: P7270 Keypad Functions KEY FUNCTION Primary Function: Allows the user to scroll through av ailable systems, gro ups, or channels, depending on personality programmi ng. Secondar y Function : Changes the selection for an it em within a list.
MM23772, Rev. F 108 11.2 DISPLAY The radio display is made up of 3 lines (see Figure 11-4). Lines 1 and 2 contain eight alphanumeric character blocks and are used primarily to display s ystem and group names. Line 1 also displays radio status messages.
MM23772, Rev. F 109 ICON DESCRIPTION Steady ( rotates clockwise) – Scan mode enabled. If icon is not visible – Scan is disabled. Steady – Channel Guard enabled.
MM23772, Rev. F 110 Where: xxxx is the error code and DSP ERR or DIG V ERR is the message. 11.5 ALERT TONES The P7200 and P5200 rad io provides audible Alert Tones or “beeps” to indic ate the various operating conditions (see Table 11-4).
MM23772, Rev. F 111 If system selection is programmed to the SYSTEM/CHANNEL Selection knob, direct access to systems will not be available. Pressing or will scroll through different sets of 16 systems each (banks) if more than 16 systems are programmed into the radio.
MM23772, Rev. F 112 11.9.2 P7250 and P5250 Model 1. Press to toggle scan OFF and verify is not displayed. 2. Select channel. 3. Press once to remove channel from the list. 4. Press once to add as a normal channel. 5. Press twice to add as a Priority 2 channel.
MM23772, Rev. F 113 2. * TXEMER * will flash in the display, plus and will be displayed. After 2-3 seconds the transmit icon will turn off. 3. * TXEMER * and will remain until the emergency is cleared. 4. Press the PTT and will reappear. 5. Release PTT when the transmission is complete.
MM23772, Rev. F 114 3. The radio will continue to receive and tr ansmit normally while in the menu function. 4. To scroll through the menu options use the or keys. When the required menu item has been found align the cursor with the option then press to select it.
MM23772, Rev. F 115 Table 11-5: Menu Item Information FEATURE DISPLAY PARA METE R SETTING COMMENT Keypad Lock Menu Item: KEY LOCK Once Selected: LOCKED Locked Unlocked Locks the keypad. To unlock; press and rele ase “M” then within 1 second press the option button ( NOTE: this sequence is also a short cut to locking the k eypad.
MM23772, Rev. F 116 Table 11-6: Information Display PRS - NAME XXXXXXXX Personality Name EEPR SIZ EEPROM Size RAM SIZ RAM Size FLSH SIZ Flash Size RF BAND Frequency Band HSD RATE Data Transfer Rate PRS VER Software Version DSP_ _RAM DSP Software Version FLSH - VER FLASH Software r - released, 01A - revision state M/A-COM (C) – 2004 Copyright 11.
MM23772, Rev. F 117 12 TECHNICAL ASSISTANCE The Technical Assistance Center's (T AC) resources ar e available to help with overall system operation, maintenance, upgrades and product support. TAC is the point of contact when answers are needed to technical questions.
MM23772, Rev. F 118 13 BASIC TROUBLESHOOTING Use Table 13-1 as a troubleshooting gui de if the radio do es not operate properly. If additional assistance is required, contact a qualified service techni cian or call M/A-COM at 1-800-528-7711. Table 13-1: Troubleshooting SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION Radio will not turn on.
MM23772, Rev. F 119 BATTERY WARRANTY A. M/A-COM, Inc. (hereinafter "Seller") warrants to the original purchaser for use (hereinafter "Buyer") that nickel-cadmium and nickel-metal h.
MM23772, Rev. F 120 WARRANTY A. M/A-COM, Inc. (hereinafter "Seller") warrants to the original purchaser for us e (herein after "Buyer") that Equipment manufactured by or for the Seller shall be free from defects in material and workmanship, and shall conform to its published specifications.
MM23772, Rev. F 121 NOTES.
Tyco Electronics Wi reless S ystems Segment 221 Jefferson Ridge Parkway Lynchburg, Virginia 24501 (Outside USA, 1-434-385-2400) T oll Free 1-800-528-7711 www.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Tyco Electronics P5200 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Tyco Electronics P5200 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Tyco Electronics P5200, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Tyco Electronics P5200 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Tyco Electronics P5200, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Tyco Electronics P5200.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Tyco Electronics P5200. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Tyco Electronics P5200 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
