Manuel d'utilisation / d'entretien du produit 0-1591700-x du fabricant Tyco
Aller à la page of 33
Wireless Access Point Model 0 -1591700-x User Manual Page 1 of 33 Corporate Grade SNMP Managed Wireless Access Point - Product User Guide Part Number 0-1591700-x PL0356 ©2003TycoElect ronics Issue 1.
Wireless Access Point Model 0 -1591700-x User Manual Page 2 of 33 Table Of Contents Introduction ........................................................................................................................ 4 Key Features and Benefits .....
Wireless Access Point Model 0 -1591700-x User Manual Page 3 of 33 LA N M en u ......................................................................................................................... 19 LAN Setti ngs ..................................
Wireless Access Point Model 0 -1591700-x User Manual Page 4 of 33 Introductio n The Tyco Electronics W ireless Access Point model 0-1591700 is an SNM P managed, dual band, multimode high performance access point intended for the professional, commercial and corporate markets.
Wireless Access Point Model 0 -1591700-x User Manual Page 5 of 33 FCC Compliance This device complies with Part 15 o f the FCC rules. Operation is subject to the 2 condi tions:- 1. This device may not cause har mful interference, 2. This device must accept any interference received including interference that may cause undesired operation.
Wireless Access Point Model 0 -1591700-x User Manual Page 6 of 33 Disclaimer Tyco Electronics makes no representation or warranties wi th respect to the contents hereof and specifically disclaims any implied warranties or merchantability or f itness for any particular purpose.
Wireless Access Point Model 0 -1591700-x User Manual Page 7 of 33 Inst allation Practice W ir eless LAN systems need a little more planning than conv entional wired LANs.
Wireless Access Point Model 0 -1591700-x User Manual Page 8 of 33 Access Point Ports The access point has all t he physical connections located on the r ight hand side panel. These connections are:- Figure 1 - Access Po int Side P anel DC In This is a 3.
Wireless Access Point Model 0 -1591700-x User Manual Page 9 of 33 Wall Mounting the Access Point Figure 2 - Rear Panel The access point is supplied with a desk- mount stand but it is probably best to wall-mount the unit to deliver best possible radio performance.
Wireless Access Point Model 0 -1591700-x User Manual Page 10 of 33 Gett ing S t arted The access point is easy to install and w ill work with very litt le conf igur ation. Configuri ng your PC To enable the access point to ent er service, some basic configuration needs to be complet ed.
Wireless Access Point Model 0 -1591700-x User Manual Page 11 of 33 6. This Internet Protocol (TCP/IP) Propert ies scre en is used to specify the IP address of the PC. Note that t he access point and PC addresses must be in t he same subnet. The default I P address for the access p oint is 192.
Wireless Access Point Model 0 -1591700-x User Manual Page 12 of 33 5. If the web browser reports that it cannot find the access point, then recheck the following:- a) The correct IP address has been en tered into the w eb browser. b) Ensure that the IP address of the PC is in the sa me subnet.
Wireless Access Point Model 0 -1591700-x User Manual Page 13 of 33 11. Configure the access point to meet the required radio settings by selecting the Wireless menu option and then the r equired band 11a or 11g .
Wireless Access Point Model 0 -1591700-x User Manual Page 14 of 33 Men u Sy st ems The access point supports 3 di fferent menu presentations:- • W eb br owse r • Te lnet • Serial Console Each menu supports the same types of commands and controls.
Wireless Access Point Model 0 -1591700-x User Manual Page 15 of 33 Sy ste m M enu Administrator Setti ngs This menu specifies the password and remote mana gement control of the access point. Set a password to restrict management access to the access point via the w eb, console or Telnet interfaces.
Wireless Access Point Model 0 -1591700-x User Manual Page 16 of 33 Firm war e Upgr ade This mode enables the access point firmware to be upgraded by either a TFTP session w ith a TFTP server or via the w eb interf ace.
Wireless Access Point Model 0 -1591700-x User Manual Page 17 of 33 Web Upgrade To load the upgrade code from the web interface, use the followi ng steps:- 1. Select the web option and the screen below is displayed:- Figure 12 - Web Upgr a de Screen 2.
Wireless Access Point Model 0 -1591700-x User Manual Page 18 of 33 Backup Settings / Restore Settings This option allows you to store the cu rrent configuration of the access point in a sa fe location. In addition, the saved setting s can be restored if required.
Wireless Access Point Model 0 -1591700-x User Manual Page 19 of 33 LAN Menu LAN Settings This menu ar ea enables you to change the IP add ress, the subnet mask and the g ateway values. If you are not sure about th ese settings, please contact your network administrator.
Wireless Access Point Model 0 -1591700-x User Manual Page 20 of 33 DNS Settings Domain Name Servers (DNS) are used t o map an IP addr ess to t he equivalent domain name suc h as http ://ww w.ty coel ectroni cs.com/ . Your ISP or network administrator should provide the IP address for one or mo re domain name servers.
Wireless Access Point Model 0 -1591700-x User Manual Page 21 of 33 Filtering Me nu MAC Address Filt ering - Access Control List The access point can be configured to allow or r eject clients access to the network. This is achieved by checking the client MAC address against an access control list programmed by the network administrat or.
Wireless Access Point Model 0 -1591700-x User Manual Page 22 of 33 Wireless Menus This menu option has 4 menus:- Menu Mode Function 11a Displays and programs the entire 802.11a band radio interface. 11g Displays and programs the entire 802.11b/g band radio interface.
Wireless Access Point Model 0 -1591700-x User Manual Page 23 of 33 Smart Channel This uses the EN301 893 DFS (Dynamic Freq uency Selection) mode t o enable the access point to “hop” to another channel i f it encounters co-channel interference.
Wireless Access Point Model 0 -1591700-x User Manual Page 24 of 33 Fragment Length This specifies the num ber of bytes that are transmit ted before a frame is fragmented.
Wireless Access Point Model 0 -1591700-x User Manual Page 25 of 33 Figure 20 - WEP Key E ntry Sub-Sc reen Note that the ident ical key must be used at all the clients and at the access point, otherwise authentication will not be possible. Keys should be chan ged frequently for maximum security.
Wireless Access Point Model 0 -1591700-x User Manual Page 26 of 33 802.11g Menu Option This screen is used to con fig u re the 2.4GHz band 802.11b/g radio interfaces. Many of the settings are have the same f unction as the previous 802.11a configuration scr eens on pages 22 onwards.
Wireless Access Point Model 0 -1591700-x User Manual Page 27 of 33 802.11g Stations Only To optimise throughput performance of mixed netw orks containing both IEEE802.11b and 802.11g clients, then t his control should be Disabled by d ef ault . This mixed client mode delivers thr oug hput of up to 9Mbps.
Wireless Access Point Model 0 -1591700-x User Manual Page 28 of 33 Status Menu Option This menu displays important information about the connected clients and the cur rent sessions.
Wireless Access Point Model 0 -1591700-x User Manual Page 29 of 33 SNMP Menu The access point supports SNMP (Simple Network Management Protocol). This enables the automatic reporting of access point faults to r emote IP addresses, together with remote configuration over the network.
Wireless Access Point Model 0 -1591700-x User Manual Page 30 of 33 SNMP Trap Traps are used by the access point t o automatically send alarm informat ion to remote IP addresses. Item This is the same index value as assi gned in the SNM P Community on page 29.
Wireless Access Point Model 0 -1591700-x User Manual Page 31 of 33 Fault-Fi nding and F A Qs I cannot communicate with the access point using a direct LAN connect ion between the PC and the access point:- 1. Check that a cross-ov er style Ethernet cable is used between the PC and the access point.
Wireless Access Point Model 0 -1591700-x User Manual Page 32 of 33 How can a client “roam” from access point to access point ? 1. Clients can “roam ” between access points if the SSI D, WEP and optionall y the 802.1x settings are common. The channel assignments do not need to be ident ical as the clients should be frequency-agile.
Wireless Access Point Model 0 -1591700-x User Manual Page 33 of 33 Product Specificatio ns Standards Compliance IEEE802. 3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.11a 5GHz Band at rates up to 54M bps IEEE802.11b 2.4GHz Band at rates up to 11M bps IEEE802.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Tyco 0-1591700-x c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Tyco 0-1591700-x - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Tyco 0-1591700-x, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Tyco 0-1591700-x va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Tyco 0-1591700-x, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Tyco 0-1591700-x.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Tyco 0-1591700-x. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Tyco 0-1591700-x ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
