Manuel d'utilisation / d'entretien du produit 19WLP530HID du fabricant Beko
Aller à la page of 46
INTEGR A TED DIGIT AL HD READ Y COL OUR TELEVISIONS 19WLP530HID Operating Instructions.
CONTENTS 1 IMPORTANT INFORMATION .................................................................. 1 1.1 Your New Television ........................................................................................... 2 1.2 Important Safety Instructions.
-1- Helpdesk: 0845 600 4911 1 IMPORTANT INFORMATION Congratulations on your choice of Television. Should you need assistance with initial setting up or connectivity of your Television, or believe that.
-2- Helpdesk: 0845 600 4911 An integrated digital TV lets you access the free digital channels that are broadcast in the UK. It uses a digital signal, received through your normal aerial. For more information please visit www.digitaluk.co.uk Freeview digital TVs give you over 40 free channels that you can watch for no subscription.
-3- Helpdesk: 0845 600 4911 1.2 Important Safety Instructions 1) Please READ the operating instructions before using the your TV for the first time. 2) Wipe the TV cabinet clean with a soft and dry cloth. Wipe dust from the screen gently with a soft cloth.
-4- Helpdesk: 0845 600 4911 10) DO NOT USE headphones at extremely high volume levels since this may cause permanent loss of hearing. 11) Operate your TV only in the 230 V 50Hz voltage range. Use the mains lead supplied with the TV. If your TV is a grounded (Class I) product, then it must be connected to an earthed socket.
-5- Helpdesk: 0845 600 4911 1.3 Electrical information This LCD TV is fitted with a BS1363/A 13 amp plug. If it is not suitable for your supply sockets it must be removed and replaced with an appropriate plug. If the plug becomes damaged and/or needs to be replaced please follow the wiring instructions below.
-6- Helpdesk: 0845 600 4911 2 GETTING STARTED Remove your television carefully from its box. You can keep the packaging of your television to use in future.
-7- Helpdesk: 0845 600 4911 2.3 Stand Removal If you wish to remove the television stand, please follow these steps: • Coveratablewithasofttowel(orotherprotectionto prevent damage to the TV or table). • CarefullylaytheTVfrontdownonthetable.
-8- Helpdesk: 0845 600 4911 2.5 TV Control Panel Stand by indicator Bright light: TV is in Stand-by Dimmed light: TV is On No light: Power switch is off.
-9- Helpdesk: 0845 600 4911 2.6 Rear and Side External Connections CI slot HDMI Video input Audio R input Audio L input PC-Comp Audio input AC mains power Aerial Input Scart VGA (PC-Component input) • Abovedrawingforexternalconnectionsisrepresentational.
-10- Helpdesk: 0845 600 4911 2.7 Remote Control Stand-by mode On/Off button Temporary sound mute (Mute) button AV modes selection menu button Picture Format selection button Picture and Teletext (PAT).
- 11 - Helpdesk: 0845 600 4911 2.8 Basic Television Controls Before using your television, please refer to Section 3 for information on first time use and automatic tuning. Note 1: The sequence of operation of the Remote Control keys is illustrated on the left side of the page for each function described in this section.
-12- Helpdesk: 0845 600 4911 2.8.6 Main Menu Press the MENU button. The Menu including all the setting menus will appear on the screen. Navigate through the Menu titles with the Right/Left movement buttons and press the OK button to select the desired menu.
-13- Helpdesk: 0845 600 4911 Scroll to the Country Selection tab by pressing the Up/Down movement buttons and press Right/Left movement buttons to select your country. Then, scroll to the Scan Type tab by pressing the Down movement button and select DTV option by pressing the Right/ Left movement buttons.
-14- Helpdesk: 0845 600 4911 3.2.2 Manual tuning of digital channels and storing in the memory Press the MENU button on your remote control. Select CHANNEL SETUP by pressing the Right/Left movement button and confirm your selection with OK button.
-15- Helpdesk: 0845 600 4911 Select the system in which you would like to make the search from the System tab by pressing the Right/Left movement buttons and move to the Channel tab by pressing the down movement button. Press OK on your remote control to select “S” ” band or “C” ” band and enter the channel number with numeric buttons.
-16- Helpdesk: 0845 600 4911 3.4 Electronic TV Guide (EPG) Electronic TV Guide is for Digital broadcasts only. The Electronic TV Guide gives general information about all of the programmes of the next 8 days. To display the Electronic TV Guide, press EPG button on the remote control and EPG will be displayed.
-17- Helpdesk: 0845 600 4911 6. You may delete the reminder that you have added directly by using BLUE button of your remote control in the EPG menu or delete from Reminder List menu by pressing YELLOW button. 7. If the time of the reminder you have set previously and the new one you will add overlap, a warning message will be displayed.
-18- Helpdesk: 0845 600 4911 3.5.4 Deleting a stored channel Warning: Deleting a channel will be permanent. Full channel scan will be necessary to restore the deleted channels. Select the channel you want to delete from the Programme Table menu with Up/ Down buttons and press the “ YELLOW ” button on your remote control.
-19- Helpdesk: 0845 600 4911 3.5.8 Channel List If you press OK button when no menu is open, Channel List menu will be displayed on the screen. You can see all the channels of the current mode while you are in the Channel List menu, you can select the desired channel with Up/Down buttons and view it by pressing the OK button.
-20- Helpdesk: 0845 600 4911 4 THE SETTINGS ON YOUR NEW TELEVISION 4.1 Performing the Sound settings You may perform Volume settings by using the V+ or V- buttons on your television or the VOL+/VOL- buttons on your remote control. You can perform other Sound settings by entering the Sound menu.
-21- Helpdesk: 0845 600 4911 4.2 Performing the Picture settings 4.2.1 Picture Menu You can perform Picture settings by entering the Picture menu. To do this, press the MENU button on your remote control, select PICTURE menu by pressing the Right/Left movement buttons and press the OK button.
-22- Helpdesk: 0845 600 4911 4.2.5.1 DNR (Noise reduction) You may reduce interference and noise formed in the picture by using this feature. Select DNR tab with the Up/Down movement buttons to activate this feature and select one of the Off , Low , Normal , High or Auto options with Right/Left movement buttons.
-23- Helpdesk: 0845 600 4911 4.2.6.4 4:3 Use this setting to watch the broadcasts in the 4:3 format. 4.2.6.2 16:9 Please use this setting for watching wide screen DVDs, wide screen video cassette or 16:9 formatted broadcasts. Since various screen formats such as 16:9, 14:9 and etc.
-24- Helpdesk: 0845 600 4911 Note: Since the use of certain functions in order to change the picture sizes for collective projection or commercial purposes (modifying the height and width etc.) will be deemed an infringement of the picture’s copyright, legal proceedings can be carried out as required under relevant laws.
-25- Helpdesk: 0845 600 4911 4.4 Options menu settings Press the MENU button on your remote control. Select OPTIONS by pressing the Up/Down movement buttons and press the OK button. You can select the titles for which you would like to perform an operation in this menu by using the Up/Down movement buttons.
-26- Helpdesk: 0845 600 4911 4.4.6- Automatic Update If this function is set to On , your television will search for new software through OAD (Over Air Download) when it is in Stand-by mode and install new software if any are found.
-27- Helpdesk: 0845 600 4911 movement buttons and confirm your selection with OK button. Block Programme menu will be displayed. Select the channel you want to block from the Block Programme menu with Up/Down buttons and confirm with the GREEN button on your remote control.
-28- Helpdesk: 0845 600 4911 5 TELETEXT Teletext means in short the transmission of various updated information along with the TV broadcast signal in the form of text and graphics.
-29- Helpdesk: 0845 600 4911 5.7 Temporary TV Picture (UPDATE) This button allows you to switch to the television picture while the page you want is being searched in the teletext broadcast eliminating the need to wait during the search.
-30- Helpdesk: 0845 600 4911 6.2 Connecting external equipment via AV connection AV : To watch the picture of the broadcast device connected using the RCA (Phono) input, select AV option from the Source menu and press OK button. Your TV will switch to the selected source.
-31- Helpdesk: 0845 600 4911 6.3 Connecting an external device via YPBPR connection YPBPBR (Component Input): When a connection is made via the VGA socket with a VGA to YPBPR connector lead (not supplied),, select YPBPR option from the Source menu and press the OK button to display the picture.
-32- Helpdesk: 0845 600 4911 6.4.1 HDCP Your TV supports HDCP feature. To use this feature, you must set up a connection to your TV set’s HDMI video port and select HDMI by pressing the SOURCE button on your remote control. NOTE: In HDMI mode; some resolutions are supported when a DVI to HDMI converter cable from a PC is used.
-33- Helpdesk: 0845 600 4911 6.5.7 Size: This is the pixel clock frequency. User can narrow down or enlarge the display by selecting a desired value. 6.5.8 Phase: Using the Right/Left movement buttons, you can ensure that the colours and shapes are exactly consolidated on the PC image.
-34- Helpdesk: 0845 600 4911 7 ADDITIONAL INFORMATION 7.1 Troubleshooting Failure Possible cause Solution The television does not function Is the mains cable connected to the mains supply? Check the mains cable. Is the Power On/Off button on? Check if the On/Off button is on.
-35- Helpdesk: 0845 600 4911 7.2 Technical Specifications Chart Design and specifications may be changed without prior notification. SCREEN SIZE 19” Panel type 19”, 16:9 Active matrix TFT Sound output 2x2.
-36- Helpdesk: 0845 600 4911 7.3 The Digital Switchover Keep this important information about how to re-tune your TV during the digital TV switchover Television in the UK is going digital, bringing us all more choice and new services.
-37- Helpdesk: 0845 600 4911 When does switchover happen? *Copeland switches on October 17, 2007 Visit us at digitaluk.co.uk call us on 0845 650 50 50 The exact date you switch depends on the transmitter you are served by. To check when you switch, go to Digital UK’ s postcode checker on www.
-38- Helpdesk: 0845 600 4911 7.4 UK Transmitter Stations (Analogue) UHF CHANNELS STATIONS CT D Regional Main stations BBCI BBC2 ITV CH4 CH5 Map BBCI BBC2 ITV CH4 CH5 Map North West Caldbeck 30 34 28 3.
-39- Helpdesk: 0845 600 4911 7.5 Your Television Guarantee Your new television is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. 7.5.1 What is covered? • Allrepairsnecessaryasaresultoffaultymaterials,defectivecomponentsor manufacturing detect.
-40- Helpdesk: 0845 600 4911 Model Number Serial Number Date of Purchase Place of Purchase Please keep your purchase receipt.The engineer will need to see it should you require service under the 12-month Guarantee HOW TO OBTAIN SERVICE Congratulations on your choice of a Beko colour television.
-41- Helpdesk: 0845 600 4911 INDEX Symbols 1.5kHz ...................................................... 20 4:3............................................................ 23 5kHz ......................................................... 20 10kHz ....
-42- Helpdesk: 0845 600 4911 G GAME CONSOLE ..................................... 30 Game Mode ............................................. 25 Getting Started ......................................... ..6 Green .......................................
-43- Helpdesk: 0845 600 4911 S SATALLITE RECEIVER ............................. 30 Scart.................................................6, 9, 30 Scart Connection ...................................... 30 SCART/S-VHS input ............................
GNH.801.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Beko 19WLP530HID c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Beko 19WLP530HID - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Beko 19WLP530HID, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Beko 19WLP530HID va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Beko 19WLP530HID, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Beko 19WLP530HID.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Beko 19WLP530HID. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Beko 19WLP530HID ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
